Looking for printer driver

Hi, I'm looking for a third party driver for canon b&w laser model;lbp1120
any experiences or suggestions appreciated

Hi Ian,
I looked around on Canon's site and the web. It appears that the LBP-1120 is a Windows only printer. It's considered a software printer. Meaning that the driver has to do all of the prep work and then sends the completed raster data to the printer. From what I've read on quite a few sites, there was never an OS X driver written for this printer. Some tried to get it to work with the OS X Gimp drivers and those didn't work either.
Not that it would hurt for you to call Canon's support line and see what they say.

Similar Messages

  • Old canon laser, looking for printer driver

    Until now only used on windows pc but now I would like to use it on my mac
    hi, i'm looking for a third party driver for canon laser b&w model; lbp1120
    any experiences or suggestions appreciated

    http://www.linuxprinting.org/show_printer.cgi?recnum=Canon-LBP-1120
    Good luck with this - I haven't tried it.

  • My printer is a Samsung ML-2010R.  Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro.  Previously, I was running Mac Os X version 10.5.8 through this printer  on a 4 yr old Macbook. Any further help is most appreciated:-)

    My printer is a Samsung ML-2010R.  Still looking for a driver solution to run Mac OS X Lion through a new Macbook Pro.  Previously, I was running Mac Os X version 10.5.8 through this printer  on a 4 yr old Macbook. Any further help is most appreciated:-)  Humbly, bowiej

    Apple seems to be naming their operating sytems usability based on the respective turd size of the feline in question. Lions are big, very, very, very big.
    I had a system that served me well for 2 years until I mistaking bought a new machine which runs mega-turd (Lion). Foolish me, now nothing works properly, its a daily struggle to get anything working smoothly using my NEW mac mini. All my other machines work fine, even the windows machines and my Android tablet see all the network components and can talk to each other.
    My Internet service is over 3g which I share to the house using internet sharing via my brand new €800 mac mini running POS Lion, everytime the service is interrupted, Kaboom, the mini resets the DHCP server, but doesn't seem to refresh any of the components so connections drop everywhere.
    Its amateur hour at Apple folks.
    There are several posts alone relating to internet sharing, I have submitted a bug report relating to the non user controllable DHCP server (which may be at fault), but the response / solution from Apple was lacklustre and ultimately didn't work.
    See this, there are some work around's in there;
    https://discussions.apple.com/thread/3771614?start=0&tstart=0

  • I am looking for a driver for a BJC-420J PRINTER

    I am looking for a driver for a BJC-420J PRINTER

    Hi dad,
    Drivers for Windows 7 are not available for this model. While considering the desire to provide the best possible support for Canon's current products, Canon must make decisions on which products to support when new operating systems are introduced. These decisions are generally based on the age of the product and the number of product estimated to be still in use.
    Since your device is not supported under the current operating system, you are eligible for Canon's Loyalty Program. This option allows you a one-time opportunity to purchase a new or refurbished product that uses Canon’s next generation technology and carries a limited manufacturer’s warranty. To help you get up and running quickly, we also offer free ground shipping (if the order is completed by 4:00 PM EST). If you would like to take part in this option, please call our Sales Department at (800)OK-CANON (800-652-2666) seven days a week, 8am to Midnight.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you

    looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you Dont need all the photo suite stuff,just basic scan and print.
    Thanks

    Hi @RUkiddingme 
    You can download the full feature software and driver, and only install the basic driver. In the installation you should see the option for custom software. Here is the link to download the software; rw2_021_w02_enu.exe
    Please let me know if this resolves the issue.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Looking for Printer Error

    I have a Photosmart 7510 printer. I am on a Mac using 10.9. When I try to print I get a message looking for printer. If I turn the wifi off and then back on again it finds the printer and prints. If I want to print another page I get the error again.

    Welcome to the forums tal6620
    I saw your post about your printing issue you are having with your Photosmart 7510 and your Mac running Mavericks.
    I would suggest trying the following:
    Mac OS X: How to reset the printing system
    Repair disk permissions
    Restart the Mac
    Re-add the printer (do not add the AirPrint driver)
    Best wishes!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • "Looking for printer...." problem

    Out of the blue, all of the machines in our office are now reporting "Looking for printer...." when users try to print to our network connected HP4200. The message is appearing in the printer app.
    The printer itself seems fine, and i can print to it from a windows machine. Restarting the printer has no effect on the problem.
    I've already tried the various solutions I've found in the forums here. Clearing the caches, deleting and reinstalling the printer driver, etc. works for a document or 2, but then the machine falls back into the looking for printer pattern again.
    This is happening on Tiger, Leopard, and Snow Leopard.

    This problem went away as mysteriously as it arrived. Sadly, today it is back again and the proposed fix didn't help any better than all the rest of the changes we've tried. The only thing that works is to delete and reinstall the printer. However that is only good for a print or 2 before we have to do it again.
    No changes have happened on the printers, the network or the macs to account for the problem coming and going.

  • Looking for Print Server for HP Photosmart C4483 All-in-One Printer

    I am looking for Print Servers that I can use with 'HP Photosmart C4483 All-in-One Printer' for both 'Printing and Scanning'. I'm not sure if this Printer is Network Ready or Network Capable, kindly advice.

    Hello Merole
    As I understand it you can print color everywhere but from MS Word 2013? If this is the case try the steps I have outlined below to see if they resolve your issue:
    On the View tab, in the Color/Grayscale group, click Black and White.
    On the Black and White tab, in the Change Selected Object group, click the settings that you want.
    I hope this helps resolve your printing issue. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I've been "looking for printer" for four years.

    Hi everyone,
    I decided to bite the bullet and make a forum post before giving in to my frustration and chucking the thing out the window... I am running OS 10.6.8 on a mid-2008 MacBook and have an HP Photosmart C4385 all-in-one wirelessly connected. Well, connected is perhaps too strong a term. It works great about 50% of the time, and the other 50% I spend trying to coax my computer to find it. When I go to print something I get the "Looking for printer... Printer offline" message. I've been all over the HP site (you can imagine how helpful that was) and, as suggested, tried printing a config page and typing the printer's URL into the browser, but the page doesn't load. Here are some of the specs from the config page:
    IP Address: 169.254.xxx.xxx
    Subnet Mask: 255.255.0.0
    Default Gateway: 0.0.0.0
    Configuration Source: AutoIP
    From some other sources it sounds like the AutoIP is the problem, but I can't find a way to set a fixed IP. I don't have access to the wireless router but this problem has stayed with me through two dorm rooms and two apartments, all with different wifi setups. Is there anything I can do?

    This not intended as a solution to the IP issue, but as a possible solution to the printing problem. Why not connect your Macbook to the printer with a USB cable?  That way there is no inaccessible router to deal with.

  • Laser Jet M1212 "Looking for Printer"

    Hello, 
    Using the Mac  10.9.2 operating system, I have started to get the following error message when I try to print: "looking for printer" - on my computer screen.  Nothing prints. 
    In order to fix the problem, I must unplug and replug in my router (Cisco Linksys E2000) and turn the printer off and on. 
    This problem comes up at least once a day, recently. 
    Any ideas re how to avoid the problem altogether? 
    With thanks. 

    Hi AnnPiece,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand the printer keeps losing the network connection.
    I will be happy to help you.
    When the printer is installed on a network, (wired or wireless) the router assigns it an IP address.
    However this IP address can change for various reasons.
    I would setup a static IP address.
    Printer Does Not Maintain Wireless Connection. Disregard the title.
    Go to Solution five: Assign the printer a static IP address.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a great weekend!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Looking for printer...

    When I try and print using a shared printer on another Mac at my home network the documents queue up for the printer, but I only get a "Looking for printer..." status. I have to remove the printer and add it again. This appears to occur after the host Mac goes into sleep mode.
    The printer is a Kodak 5300. The host machine is a Mac mini. Both Macs are running 10.5.2

    Found answer. The USB connection to my Airport got knocked out when someone was vacuuming the other day.

  • Looking for printer Lexmark E250dn

    Mac book pro and Imac connected wirelessly to AE. Sending file to printer is increasingly frequently met with " Looking for printer". Unplugging the AE power to reset always fixes the problem. It lasts for a few jobs, then stops working again. Latest firmware/OS/drivers.
    Tried all the usual ( reset AE/Printers/reinstalled printer (Bonjour))
    It seems to be happening with increasing frequency(daily)
    Any help will save my few remaining grey hairs...

    I have the same problem every time I print something in the print queue it says "Looking for hp color LaserJet 4600 (0001E6A2A8ED)" Most of the time it eventually finds it and prints but sometimes it either takes a really long time 10min+ or doesn't find it at all. The printer is networked to my computer thru ethernet the computer and printer are plugged into a linksys switch and the printer has a static ip address. I never had this problem before upgrading to Leopard.

  • My officejet pro 8500 a910 is not working with mac os lion. message is 'looking for printer'.

    plse help. my officejet pro 8500 910A was working perfectly with mac os 10.6, but with installation of lion, it no longer works. message i get is 'looking for printer'. i have tried reinstalling the printer many times. also tried the Update software option but my software is fully up to date. 

    Download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Re-add the printer in System Prefst > Print & Scan
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Looking for Mouse Driver

    I have a HP Pavilion p6331p Desktop PC, and I'm looking for a driver for the mouse that came with the PC.
    Here are the details on the bottom side of the mouse:
    M/N: N910U
    RATING: 5V ...100mA
    Class-1LED Product
    HP P/N: 505062-001 Rev.A
    HP S/N: {Removed for privacy}
    KYE P/N: 31010563201
    I have Win7 (64-bit)
    The reason I'm requesting drivers for the mouse is: After a few months using the PC, one day I decided to install Ubuntu, so that I could dual-boot between Win7 and Ubuntu. I created a blank partition, and when I installed Ubuntu, I used Ubuntu to format the blank area, and instead it formated the entire drive, wiping off setup files that HP installed on the secondary partion.
    Therefore, I had to buy Win7 and re-install the OS to the computer. Ever since, the wheel on the mouse has been irratic. This is why I am looking for the driver for the HP mouse. I have looked in the file section on HP's website, and cannot locate a driver. I have downloaded the other software that came with the computer.
    Can someone please direct me to the driver software?

    you probably didnt make a partition ubuntu could recognize
    windows makes a dynamic partition which only windows can recognize,so if you were going to install sometihng else,it wouldnt recognize the partition
    use gparted to make basic partitions,
    your question,
    is your mouse the touchpad or a usb mouse ?
    If my reply was helpful please click the "Kudos" star.
    If your problem is solved please click the "Accept as Solution" button

  • Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

    I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

    Hi,
    Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
    If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
    http://www.ni.com/devzone/idnet/development.htm
    We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
    uggest contacting one of the Alliance members at:
    http://www.ni.com/alliance
    An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
    There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
    Some useful resources for your application are
    ni.com > NI Developer Zone > Development Library > Instrument Connectivity
    http:/
    /search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
    Hope this helps!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

Maybe you are looking for