Looking for professionals with Illustrator scripting experience near Nürnberg Germany

I work for a large consumer products company with a large in-house design team working on Illustrator as a main platform. I'm looking for advice on where to find individuals with a lot of Illustrator scripting experience to help our team for a limited time duration. Any thoughts on other forums, job posting sites etc. where I could search for this would be greatly appreciated. Our company is located near the Nürnberg metro area in Germany and ideally are looking for on-site help. Thanks!

I know at times it doesn't look like it but I do have a day job ( just about ) Carlos… Language would a problem too ( I just about do english as we brits do, pig ignorant bunch ) I've been to Hamburg and the beer was great thou…
I don't know why but I have think Chris Gebab may be from that way…

Similar Messages

Looking for "Replace with Symbol" script

So I am trying to replace gps points with a symbol I have created. I have found blogs referencing a script that can replace selected items with symbols saved in the symbols panel, but I can't seem to find the actual script! If anyone knows where I can find JET_ReplaceWithSymbol.jsx or any other script that can do the same function, it would be greatly appreciated!

Hi CarlosCanto ( & Muppet Mark ;-),
First of all I apologize, as I only started this Illustrator scripting a few weeks ago so sorry for my ignorance to things thus far. Its actually been going pretty well, but many things seem to elude me while others seem to be beyond me at this point.
Thanks so much for the additional info CarlosCanto, tags.length worked to get around that issue. I also was able to zero out the rotation (which took some research and further headache) before gathering the width/height (* however see below). It now seems to scale accurately, but given the ratios of the original and new items it seems to locate top left and fit from there proportionally (* see below) perhaps due to the scale ratio part of the code?. So thanks so much for the heads up on both the tags.length and zeroing out rotation before hand, both helped. So I am inching along to further confusion and headaches. ;-) Is there a resource where can I find more detailed information about these "tag" assignments/values, I find little nuggets on the forum and some info in the Scripting Reference but was hoping to see maybe more detailed information if it exists.
* Does the rotation tag get assigned to anything that has been rotated via the IDE as well also already rotated via obj.rotate(num) through code? To me it seems that items rotated with rotate() previously via javascript don't contain this tag, nor do Effect - Transform items, I cant target it to zero the rotation or rotate them to the previous rotation value? I cant seem to replace and retain rotation for something that has been rotated through code with rotate() already or via the Effect menu. But maybe I am wrong an just don't know how to target those, I am fumbling so much with this code trying to get it to work at all and trying to get all scenarios to work, I fix one break another, almost to the point of throwing in the towel and giving in to confusion. :-( I have tried so many things that I am even confused writing this as to what works, what doesn't, why, why not, at this point along with how to explain it. ;=) Forgive me. Ugh, I am at a loss, this whole rotation property seems rather challenging compared to the others given this request for outcome.
My basic tests are as follows, I have been testing everything (even through possibly redundant), as I need this to work with ALL scenarios if possible. ;-)
So far it works with these:
- items rotated manually with the mouse
- rotate tool
- the transform window
- right click transform
- Ojbect - Transform - Rotate
So far these do NOT work in retaining the present rotation:
- Effect - Distort & Transform - Transform - Rotate ( Also: scales fine but offsets its position, towards TL? )
- Items rotated via Javascript using obj.rotate(num) ( Also: scales larger when replaced? )
- When I run the script again, specifying a different symbol the rotation is lost
- When I use symbol replace after applying the script the new replaced symbol does not retain the scale
I hope I have stated those correctly, I have done so many tests with so many factors, approaches and code variations that I am thoroughly confused. So that seems to be the status update thus far, this whole rotation property seems rather challenging compared to the others, I guess since so many other factors are involved when that property is involved. I wish rotation was just rotation and could just be read and manipulated more easily. I was curious, even though it is beyound me, does using matrix transforms make this all easier and more straight forward vs tags or are both rather convoluted?
So am I spinning my wheels thinking this approach can be achieved across all those scenarios? Any thoughts, feedback, code, or entire solutions :-) are welcome at this point. Thanks so much to CarlosCanto and everyone else, I greatly appreciate it.

Looking for help with PowerShell script to delete folders in a Document Library

I'd like to create a PowerShell script to delete old folders in a Document library that are over 30 days old. Has anyone created something like this?
Orange County District Attorney

Hello Sid:
I am trying to do the same and Iam running the script to delete the subfolders inside a folder but I have some errors.
Could you please take a look?
_______Script________
$web = Get-SPWeb -Identity https://myportal.mydomain.com
$list = $web.GetList("ar_mailingactivity")
$query = New-Object Microsoft.SharePoint.SPQuery
$camlQuery = '<Where><And><Eq><FieldRef Name="ContentType" /><Value Type="Computed">Folder</Value></Eq><Leq><FieldRef Name="Created" /><Value Type="DateTime"><Today OffsetDays="-30" /></Value></Leq></And></Where>'
$query.Query = $camlQuery
$items = $list.GetItems($query)
for ($intIndex = $items.Count - 1; $intIndex -gt -1; $intIndex--)
$items.Delete($intIndex);
________Errors_______
Unable to index into an object of type System.Management.Automation.PSMethod.
At C:\Script.ps1:2 char:22
+ $list =$webGetList <<<< "ar_mailingactivity"]
+ CategoryInfo
:InvalidOperation: (ar_mailingactivity:String) [], RuntimeException
+ FullyQualifiedErrorID
:CannotIndex
You cannot call a method on a null-valued expression.
At c:\Script.ps1:6 char:24
+ $items = $list.GetItems <<<< ($query)
+ CategoryInfo
:InvalidOperation: (GetItems:String) [], RuntimeException
+ FullyQualifiedErrorID
:InvokeMethodOnNull

SpaceX is looking for engineers with LabVIEW experience in Hawthorne CA (LA area)

SpaceX is looking for engineers with LabVIEW programming experience for our Launch group. Our responsibilities include:
Controlling launch pad equipment via PXI/LabVIEW
Commanding and monitoring our Falcon 1 and Falcon 9 rockets via a LabVIEW-based Vehicle control system
Commanding and monitoring our Dragon capsules via a LabVIEW-based Mission Operation system
Ocean recovery of Falcon 1 and Falcon 9 stages after liftoff and Dragon capsules after splashdown
Cargo configuration of Dragon capsules going to resupply the International Space Station
Maintenance of Mission Control Centers with the help of our IT department
With the exception of the launch pad equipment program, most of our LabVIEW programs do not interact with DAQ hardware (unusual, I know). The Vehicle control and Mission Operations software get their data via Ethernet from 'black boxes' that connect to NASA & Commercial RF ground stations. We also create several utility programs in LabVIEW that also don't interact with hardware. So, this is mostly a software gig, not a hardware/software gig.
Ideal candidates will have the following qualities:
CLD-level LabVIEW experience
A good understanding of basic computer networking (TCP/IP, UPD, firewalls, VPN)
Must be enthusiastic about space (What year did we land on the moon? How many men walked on the moon? How many Space Shuttles do we currently have? etc.)
Must be willing to travel. Common destinations include Houston (NASA Johnson Space Center), McGregor TX (test site), Cape Canaveral FL (launch site), Kwajalein Marshall Islands (launch site)
Must be able to work without supervision. We have a very flat management structure, no one will be telling you what you need to do. If you don’t know, ask. If you do know, get it done.
About the job:
Job is located in Hawthorne, CA in the Los Angeles area.
This is not a 9-5 job. There will be some late nights.
You won't be LabVIEW only. Everyone chips in as needed. Our group has done Javascript, C++, MATLAB, configuring of TELEX comm systems, cutting of metal with bandsaws, welding, Unigraphics CAD, etc. If we need it and you don't know it, grab a book and learn.
We are only hiring full time employees. Contractors need not apply.
To conform to U.S. Government space technology export regulations, SpaceX hires only U.S. citizens and U.S. Permanent Residents.
Apply at SpaceX.com. Click the Careers button and fill out the general application. Mention this posting in the cover letter field. Don’t reply to this forum. You need to go to SpaceX.com to get your information into our system.
Message Edited by Lavezza on 03-31-2010 03:59 PM

There is a job posting up now at SpaceX.com. Go to the careers tab and search for LabVIEW.
Look for the position called: Mission Control Software Engineers (LabVIEW).

Looking for Help with Hyperion to JAVA

I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Class not registered. Looking for object with CLSID:

Hi,
I had create a custom project system with the help of https://msdn.microsoft.com/en-us/library/vstudio/cc512961.aspx. And which is working fine that I can create a project with extension of .myproj in the VS Experimental Instance window. But when I go for
the properties in the created project, (Solution Explorer: Right click on the project folder and select properties) it will show an exception that "Class not registered. Looking for object with CLSID:{00000-00-00-000000}" How can I provide Properties
window for this project system or can I modify the Properties window for any other default VS project system? Please help me.

Hi mathikp,
I don't think you did something wrong while creating the project, but instead it could be the issue of environment, I would suggest you to validate following things:
1, Try to create another blank app to see if the exception still thrown.
2, Run with an administrator privilege to check if you can get the project work..
I would not consider its as a coding issue but try to fix Visual Studio probably helps.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

- Looking for Drop Down menu script w/ semi-transparent backgrounds...

Looking for a dropdown menu script that will allow
semi-transparent
backgrounds (so we can partly see what the list is displaying
over).
I've Googled this to death using all the obvious keywords,
but have yet to
find what I'm looking for.
Thanks.

Yes. I understand and agree. Good point.
Thanks.
Al Sparber - PVII
http://www.projectseven.com
Extending Dreamweaver - Nav Systems | Galleries | Widgets
Authors: "42nd Street: Mastering the Art of CSS Design"
"T.Pastrana - 4Level" <[email protected]> wrote in message
news:[email protected]...
>I posted mainly for the benefit of Reese, I know you know
this.
>
>
> --
> Best Regards,
> ..Trent Pastrana
> www.fourlevel.com
>
>
>
>
>
>
> "Al Sparber- PVII" <[email protected]>
wrote in message
> news:[email protected]...
>> Actually, it's not an error. But we do happen to
have it in a CC on
>> that page because the last time I posted that page
on this forum it
>> was criticized for "failing" the W3C CSS validator.
>>
>>
http://www.projectseven.com/foxy.gif
>>
>> The Firefox console simply would report it as a
warning - not an
>> error. It would have no affect on the page. But
thanks for pointing
>> that out.
>>
>> --
>> Al Sparber - PVII
>>
http://www.projectseven.com
>> Extending Dreamweaver - Nav Systems | Galleries |
Widgets
>> Authors: "42nd Street: Mastering the Art of CSS
Design"
>>
>>
>>
>>
>> "T.Pastrana - 4Level" <[email protected]> wrote in
message
>> news:[email protected]...
>>> If you want your page to validate you might want
to separate the
>>> properties. Some modern browsers like Firefox
will throw an error
>>> with the filter property.
>>>
>>> #menu li {
>>> opacity: 0.85;
>>> }
>>>
>>> 
>>>
>>>
>>> --
>>> Best Regards,
>>> ..Trent Pastrana
>>> www.fourlevel.com
>>>
>>>
>>>
>>>
>>> "Al Sparber- PVII"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> If, for example, you are using an unordered
list for your menu, set
>>>> opacity on the LI, like so:
>>>>
>>>> #menu li {
>>>> opacity: 0.85;
>>>> filter: alpha(opacity=85);
>>>> }
>>>>
>>>> As far as I know, there are no
"off-the-shelf" menu tools of worth
>>>> that offer this as an automatic option. You
should pick yourself a
>>>> good menu system then set opacity on the
relevant element. The
>>>> menu "script" or "system" really has nothing
to do with it.
>>>>
>>>> If you need a good base menu system, you can
find free ones and
>>>> commercial ones on our site. Here is an
example of one with
>>>> transparency:
>>>>
>>>>
http://www.projectseven.com/products/menusystems/pmm/css_tweaks/opacity/
>>>>
>>>>
>>>>
>>>> --
>>>> Al Sparber - PVII
>>>>
http://www.projectseven.com
>>>> Extending Dreamweaver - Nav Systems |
Galleries | Widgets
>>>> Authors: "42nd Street: Mastering the Art of
CSS Design"
>>>>
>>>>
>>>>
>>>>
>>>> "Reese" <[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Looking for a dropdown menu script that
will allow
>>>>> semi-transparent backgrounds (so we can
partly see what the list
>>>>> is displaying over).
>>>>>
>>>>> I've Googled this to death using all the
obvious keywords, but
>>>>> have yet to find what I'm looking for.
>>>>>
>>>>> Thanks.
>>>>>
>>>>
>>>
>>>
>>
>
>

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

HT5731 How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad

I don't use Photoshop - looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting. Any suggestions?

I don't use Photoshop, I'm an Aperture guy.
I'm looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting.
I'm especially interested in the bending of the pixels, along the lines of impressionist paintings - think van Gogh.
Any suggestions?

If you are interested in computer simulated drawing and painting effects, have a look at the "ToonIt!" plug-in for Aperture. This will do some of the basic work for you, but you will have to do quite a lot of editing afterwards, to turn the image into a piece of art.
It might be easier, to do most of the drwing and painting yourself in the first place - ArtRage Deluxe is very versatile, if you have a large trackpad and pen.
For example: Applying a light ToonIt! effect "Impressionist2": The diagonal
cross-pattern is due to "Demo" mode - I have not yet bought the plug-in - it is rather expensive:
The original:

One question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to

one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
TY

The History menu can only show that fixed maximum of 15 as that is hard coded.
Maybe this extension helps:
*History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/

Looking for a more universal scripting language than AppleScript or Automator

I want to learn a cross-platform/web scripting language to automate tasks, write scripts and with the potential to create programs and web apps.
I am looking for something that:
- is not a program with a GUI like Automator, iKey, Quickeys, Maestro...
- is more "universal" than Applescript, cross-platform
- can be used to automate simple tasks in a simple way
- can also be used to create more complex scripts, web apps and maybe, eventually, programs (with GUI)
I've read about Javascript, Python, Ruby, PHP, Perl, C+, C++, Java and others, but I really don't know.
- Java sounds pretty cool, Python too.
- I'm not crazy about PHP or Perl, with Javascript, but some people swear by it
- I don't know anything about C+, C++
Does anyone have any suggestion(s)? Please let me know if you need any more details. Thank you.

C, C++, Objective-C are nor scripting languages and will not help you do web pages. (Don;t know what C+ is).
Forget Java it has lots of security problems and more and more users are disabling Java in their web browsers because of this. Developing in Java would be, in my opinion, a mistake.
If you are doing any web works at all you will need to know some Javascript, no way around that. But Javascript is actually not a bad language
Note Java and Javascript are two totally separate languages that have nothing in common but the first 4 letters of their names.
So you are left with PHP, Perl, Python and Ruby.
Dismissing PHP and Perl out of hand is a big mistake, They are both major players and you will run into them just about everywhere. If you are looking to do this for possible employment you will need to be familiar with them at least.
Python and Ruby are both strong languages as well. I don't have a lot of experience with either so I can;t speak to their strengths but learnign either would not be a mistake.
Knowing what your reasons are for asking this, personal use or for employment, might help refine the list some.
regards
Message was edited by: Frank Caggiano - Perl is also included in OS X by default. Not sure about PHP but I believe it also is. I agree TextWrangler would be a good editor for this type of work.

Looking for OD only binding script

Hello everyone,
after several weeks of trying different solutions we are stuck with trusted binding / OD binding in Deploy Studio.
We've added several workstations to our computers and they are renamed by a script this works fine.
The problem is that we have to add those workstations to our Open Directory and then add those workstations via OD to several groups.
The workstation is binded but it doesn't bind correctly.
We can see the OD server in the "Users and Groups" as "connected". But it's only bound locally (can only be seen on the workstation)
But it's not binded as we want it to be.
Our goal is that the workstation needs access to the directory (System Preferences -> Accounts -> Login Options -> Network Account Server -> Open Directory Access… --> LDAPv3 ...)
And then we have to use "Edit..."-> "bind" .After that the workstation is added to our OD and we can see it in our workgroup manager and add this workstation to the group.
Is it possible to solve this issue with Deploy Studio?
We've already tried to use "Enable trusted binding" but after imaging a workstation there is only the ouput "An error occured while trying to establish a trusted binding with the server "xxxxx",new attempt in 10 seconds..." and "Invalid credentials supplied for binding to the server" in the finalize script and the workstation has to be bound to the OD manually.
But the credentials are 100% correct.We are using the login of your OD-administrator account for the trusted binding.
We've also tried to activate trusted binding without any login information in the fields for "Directory Admin", after that there is no error but the workstation has to be bound manually again.
It would be great if there is anybody who has the same issue and maybe solved it or has any idea what to do here.
Sorry if the english description for several "buttons" aren't exactly,we are using a german version of MAC OS X (10.8.2). I hope everything is easy to understand.
Just tell me if you need any additional information about things.
DPS Version: 1.0 RC 135 (121112)
Kind regards
This is my post in the official DPS forums but there wasn't any reply except one that we could use an own OD binding script.
Is there anybody who has a working script?I found one but it has AD inside and I don't know if it's that easy to delete the AD parts from this script.
It would be great if there is someone who could help with this issue.
Kind regards

We're still looking for a solution for this issue as it still doesn't work.
We also tried to solve it with this script but it didn't work either:
#!/bin/bash
computerid=`scutil –get ComputerName`
dsconfigldap -v -f -a OD_SERVER -n OD_SERVER -c $computerid -u ADMIN_USERNAME -p ‘ADMIN_PASSWORD’
sleep 10
dscl /Search -create / SearchPolicy CSPSearchPath
dscl /Search -append / CSPSearchPath /LDAPv3/OD_SERVER
sleep 10
dscl /Search/Contacts -create / SearchPolicy CSPSearchPath
dscl /Search/Contacts -append / CSPSearchPath /LDAPv3/OD_SERVEROD_SERVER= FQDN of our OpenDirectory
ADMIN_USERNAME= account used for binding computers manually
ADMIN_PASSWORD= password for ADMIN_USERNAME
It would be great if there is somebody who could help us with this issue.
Kind regards

Security audit: Looking for a tool or script that lists al of the users in AD that have access to a folder on a computer

Thank you,

You should be able to find a third party auditing tool for this. But if you are looking for free one, you may need to update the logic, combine multiple scripts etc to achieve this.
1. Get the ACL of the folder using a tool
2. Translate the SID to an object in AD
3. If it is a group. Get the group members
3a. if it a nested group, get all members from all nested groups.
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

Looking for professionals with Illustrator scripting experience near Nürnberg Germany

Similar Messages

Maybe you are looking for