Looking for replacement power switch ribbon - HP DV7 3060us

Took this laptop apart to replacement the dc power jack. Put everything back. No power. Took off the power strip and noticed a ribbon was missing. Does anyone know were i can find a replacement ribbon or who i can contact for such a request?

Perhaps you will find the part and part number in the Maintenance and Service Guide manual for your notebook.
In addition to Cheryl's suggestion, you can also try HP Partsurfer for your part.
If you don't find the part listed in either place, I doubt it is a part that is sold.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Looking for a Power Supply

Hi!
I am looking for a power supply for my sound blaster speakers.
The model is SBS 380. The power supply works on a 4.0 volt.
Anyone who would have a spare one to sell or to inform me where
to buy one would be most appreciated. ( I'm in Canada )
I have be been to several stores but no ones carries 4 volts power supply.
The one I have is no lomger functional and the sound is excellent from those speakers.
BTW, Craetive no longer support them and have none in stock.
Thanks,
Gerry

Jason, I think he would have some trouble getting them shipped to Australia from one of those stores. Beside that it would be less from newegg, look at the additional 20% off promo and free shipping. For me it's 3 days from order to delivery from ZZf and newegg.
Yes, one of the Corsairs but not HX but as mentioned TX or VX, also PC P&C 610. Ignore watts, go by +12V amps and as FP mentioned consider future need for more power when choosing. Nowdays the VX450W (+12V~33A) would be considered minimum to get and also would be considered weak for many current systems.

Can I use a 60watt t adapter with my 2011 mac book pro 13"? I have the L adapter now, but looking for replacement that will last!

Can I use a 60watt t adapter with my 2011 mac book pro 13"? I have the L adapter now, but looking for replacement that will last!

Yes, a 13" non-Air model requires a minimum of 60 watts, so you will be fine. If it is a 2011 or earlier model, the connector is the regular MagSafe, whereas this year's models use the MagSafe 2 that is different.

Creative MEGAWORKS 6.1 650 SPK RTL - Replacement Power Switch

Just checking to see if anyone has any idea about replacing the power switch on one of these. The powerswitch is not the one that is on the sub, but the one with the volumne controls. My "volumne down" button is stuck in the down position so i can't hear anything.
The part number is PBMS0360E0320 - The pn is printed on the circuit board. Other codes include MS0360E & E56482 FA6
Fortune rj94vo
03024 - some code in the upper lfet of circuit board.

If you have to cycle power to the system in order to get the bass driver working then you may have an amplifier that has gone bad. Just to make sure it's not a heat issue, you should feel the back of the amplifier when this happens again. If I remember correctly, you should be able to touch the heatsink for at least 5 seconds; if you can't, then the amp is too hot.

Looking for replacement internal hard drives for a MacPro

Looking to replace internal hard drives in a MacPro. Was thinking about 3TB. Any recommendations?

Look in System Report for the link speed available. (Mine says 3 Gigabit.) Get drives with at least that speed; going beyond that won't get you any more performance.

Looking for replacement DIN cable for FPS2000

So my FPS 2000 has served me well, and is in good working order. However, the long extention DIN male - male cable that came with the unit was damaged in a recent move. This is the long cable used to connect the FPS2000 to the small DIN to Digital cable that plugs into the SBLive! card in my PC.
Anyone know how I can buy a replacement? Or have the specs on the cable so I can build one?

I'm also looking for that cable, mine got lost when i moved.
If you still have the damaged cable you could get the pinout using a tester or something, so that a new one can be built

IWeb - looking for replacements for 'blog' & 'photos'

With a deep Sigh..., I am finally facing up to the fact that I must move my iWeb Websites to another hosting sight and deal with the loss of the intergrated blog & photo pages that come with iWeb. I kept hoping for a miracle but now I must get on with it. I would be grateful for advice from those who have dealt with this issue already.
My biggest concern is finding suitable replacements for the blog and photo galleries that can be embedded into iWeb having a matching 'look and feel'.
I have developed many robust (well of 50) websites with iWeb and they are active websites.   The websites have:
Custom layouts (i.e. not using the suppled defalut template)
Blog pages (used as 'News' entries)
Photo pages
iMovie
HTML Snipits
Many have been designed for use with charity events and recieve quite a bit of traffic (see stats below) before and during the event.
As for the hosting - we will use GoDaddy or other Domain Provide with Hosting services.   We have already moved some of the more less complicated websites over.
I love iWeb (I know it has it's faults and I have probably pushed it to it's limits but it has handled it well). I have tried looking at other products like Rapidweaver & Freeway Pro (Dreamweaver would be out of the question for me as I'm not a programmer - I can deal with some basic html code for snippets and such - but that's my limit). My partner has begun looking at Wordpress. However, the biggest drawback from what I've seen from these other products is that I can't duplicate the freedom and ease of designing a template/layout the way I want it. I have tried to duplicate a website I have done in iWeb and I simply can't do it with these other products (at least without a great deal of work - if at all).
So, I wish to continue using iWeb for the main website desgin but desparately need to find good replacements for the blog and photo galleries to move over my existing websites.
Please HELP!
This is my 1st time up on the forums so I do apologise if this has been dealt with before. In my searches - I just haven't really found an answer which is why I'm submitting this question.
Many thanks, MichelleSC
P.S. I have been an Apple user since Apple began and have always raved about their products.   This is the 1st time I have been frustration with Apple. I really wish they would continue to develop iWeb and keep Mobileme.

Do you have visitors post comments to your blog or it is one the only includes your entries? If it's the atter then you can continue to use the iWeb blog. If you currently have visitors comment on the entires you will have to move to a new blogging system, one of those suggested by Ethmoid and Jeff.
As for photo albums I've just run across a new site called ZangZig which offers albums similar to MobileMe galleries with most of it's features plus one that MMe didn't have. The capability of selling your photos.
One convenient feature of it is that it can move/copy photos from your existing MMe galleries as well as your iPhoto library and other sources:
As for for iWeb can do after MMe is gone read the following:
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
Currently if the site is published directly from iWeb to the 3rd party server the RSS feed and slideshow subscription features will work. However, if the site is first published to a folder on the hard drive and then uploaded to the sever with a 3rd party FTP client those two features will be broken.
All of these features can be replaced with 3rd party options.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: iW14 - Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued. There's a link in the tutorial to download the file that one needs to be edited and replaced in existing slideshows and in the iWeb application for future slideshows. Once replaced in the application it's back to life as usual for iWeb.
OT

Looking for replacement DVD drive

Have a P6650z desktop, and the dvd drive needs to be replaced. I intentionally didn't get a Dell b/c I was thinking that I'd be getting better hardware.
OK I'm looking at a couple of DVD drives, but I'm not sure if they will fit the bay of my Pavillion or not--the Pavillion has a special eject button on the outside of the bay itself. Could I install either of these drives into my Pavillion?
http://www.amazon.com/Asus-DVD%C2%B1RW-DVD-RAM-Internal-DRW-24B1ST/dp/B0033Z2BAQ/ref=sr_1_1?ie=UTF8&...
http://www.bestbuy.com/site/Asus+-+DVD-E818A7T+Internal+DVD-Reader%2C/3998897.p?id=1218446822405&sku...
This question was solved.
View Solution.

Hi,
Based on this link, your machine uses standard bays that means any standard Optical drive should fit. Do you have any plan to add Blue Ray drive on your machine ? If YES, you can go for BD drive now, probably you have to pay around $10 more.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Looking for replacement 17" screen in UK

I dropped my PowerBook 17" - only a couple of feet on to a carpeted floor, but the LCD screen is smashed. My local dealer has quoted £1000 for repair, and I just wanted to investigate whether it would be feasible to replace the screen myself. I can't find where to source the part in the UK though - any ideas?
In case it is interesting, it's worth noting that the PowerBook had problems rebooting too. My data is safe, but the machine did not respond well to my impromptu crash-testing program. In fairness, there's no reason why it should.
All information gratefully received - thanks.

I realise the general idea of the forum is not to answer your own questions, but I've carried on researching this and found http://www.macfixcentre.com, who look promising and claim to for a replacement screen for £399. I'll find out if they can.

Looking for "Replace with Symbol" script

So I am trying to replace gps points with a symbol I have created. I have found blogs referencing a script that can replace selected items with symbols saved in the symbols panel, but I can't seem to find the actual script! If anyone knows where I can find JET_ReplaceWithSymbol.jsx or any other script that can do the same function, it would be greatly appreciated!

Hi CarlosCanto ( & Muppet Mark ;-),
First of all I apologize, as I only started this Illustrator scripting a few weeks ago so sorry for my ignorance to things thus far. Its actually been going pretty well, but many things seem to elude me while others seem to be beyond me at this point.
Thanks so much for the additional info CarlosCanto, tags.length worked to get around that issue. I also was able to zero out the rotation (which took some research and further headache) before gathering the width/height (* however see below). It now seems to scale accurately, but given the ratios of the original and new items it seems to locate top left and fit from there proportionally (* see below) perhaps due to the scale ratio part of the code?. So thanks so much for the heads up on both the tags.length and zeroing out rotation before hand, both helped. So I am inching along to further confusion and headaches. ;-) Is there a resource where can I find more detailed information about these "tag" assignments/values, I find little nuggets on the forum and some info in the Scripting Reference but was hoping to see maybe more detailed information if it exists.
* Does the rotation tag get assigned to anything that has been rotated via the IDE as well also already rotated via obj.rotate(num) through code? To me it seems that items rotated with rotate() previously via javascript don't contain this tag, nor do Effect - Transform items, I cant target it to zero the rotation or rotate them to the previous rotation value? I cant seem to replace and retain rotation for something that has been rotated through code with rotate() already or via the Effect menu. But maybe I am wrong an just don't know how to target those, I am fumbling so much with this code trying to get it to work at all and trying to get all scenarios to work, I fix one break another, almost to the point of throwing in the towel and giving in to confusion. :-( I have tried so many things that I am even confused writing this as to what works, what doesn't, why, why not, at this point along with how to explain it. ;=) Forgive me. Ugh, I am at a loss, this whole rotation property seems rather challenging compared to the others given this request for outcome.
My basic tests are as follows, I have been testing everything (even through possibly redundant), as I need this to work with ALL scenarios if possible. ;-)
So far it works with these:
- items rotated manually with the mouse
- rotate tool
- the transform window
- right click transform
- Ojbect - Transform - Rotate
So far these do NOT work in retaining the present rotation:
- Effect - Distort & Transform - Transform - Rotate ( Also: scales fine but offsets its position, towards TL? )
- Items rotated via Javascript using obj.rotate(num) ( Also: scales larger when replaced? )
- When I run the script again, specifying a different symbol the rotation is lost
- When I use symbol replace after applying the script the new replaced symbol does not retain the scale
I hope I have stated those correctly, I have done so many tests with so many factors, approaches and code variations that I am thoroughly confused. So that seems to be the status update thus far, this whole rotation property seems rather challenging compared to the others, I guess since so many other factors are involved when that property is involved. I wish rotation was just rotation and could just be read and manipulated more easily. I was curious, even though it is beyound me, does using matrix transforms make this all easier and more straight forward vs tags or are both rather convoluted?
So am I spinning my wheels thinking this approach can be achieved across all those scenarios? Any thoughts, feedback, code, or entire solutions :-) are welcome at this point. Thanks so much to CarlosCanto and everyone else, I greatly appreciate it.

Combo drive doesnt work, looking for replacement

I have a Satellite 2410-304 witch has a combo drive Teac DW-224E what doesnt work propertly. I have decided replacing for another new brand one.
How can I replace my old combo and install the new one?

Hi
As far as I know you have to remove on screw which is placed at the bottom on the unit on the right side. Then it should be possible to pull out of the unit.
But Im not a technician and I cant say you the detailed procedure.
In this case I would recommend to contact the service partner for a replacement because he has more experience in such cases.
Bye

Looking for a Cisco Switch Metroethernet network

Dear all,
I am deploying a metro ethernet network in the city where my company operates.
I am now thinking to my end customers connectivity to my Metroethernet switches (Cisco Me3800 series switches).
I am after these kind of switches :
- 2 ports SFP
- 6 or 8 Ports 10/100/1000
- Possibility to have Switches working in DC power
- IOS software
Can someone please advise ?

ME 3600X has 24 ports copper and 2 SFP+ ports.

Looking for a power usage app..

Seems like I have done everything I know of or could find in fourms to reduce the apps that are using up power on my iPhone 3GS.
Does anyone know of an APP that will tell me what APPS or services are using up power?
Thanks...
~Charlie

Hi Charlie,
Many misunderstand how multitasking actually works on iOS. Although you will see apps on your Multitasking tray (when you double press the home button), those are not actually running as they are in a "suspended/saved" state. Be advised that once an app is in this state, it uses virtually no battery power.
Here's an [extremely good rundown by another user of how Mutlitasking works|http://discussions.apple.com/message.jspa?messageID=12719950#12719950].
Perhaps you have worn down the battery in your phone. Battery capacity eventually degrades, but you can slow or reduce the process by following [some basic care steps|http://www.apple.com/batteries/iphone.html].
To answer your question directly, there is no such app that will provide you with information on the power usage of another app as it would really all be zero. There are some services, such as location services, that can reduce your battery if turned on and being actively used though.
-SM

I have broken button on keyboard any help where should i look for replacement?

i have a broken button on my keyboard (macbook pro mid 2012 black) any help where sould i look?

theo2260,
look on online auction sites.

Need power switch

Hello, I am looking for a power switch for my desktop. Old one just stopped working. Am working with hp p7-1126s and my product number is QU080AA Cant find a place that has them or maybe im not asking for the right part number I don't know. Any info will be helpful. Thank you

Part # is 661875-001 , and I located it as: HP Power Switch/LED Asy,P7,w/Holders Mfr P/N 661875-001, but at a fancy price.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Looking for replacement power switch ribbon - HP DV7 3060us

Similar Messages

Maybe you are looking for