Looking for rights manager

Hi,
I'm looking for a tool in order to manage rights (acl) on my file server. I would like to permit to some end users to manage the rights without allowing us to use Admin Server.
The info window in the Finder does not work properly with ACL. When I add a group or when I modify a right they didn't refresh the value. I need to close and open the info windows to see the changes.
Thanks

Ironically the SID is not listed on Microsoft's web page for well know
SIDs. I also noticed that when I dump the local users using powershell, every group and user is listed that I would expect to see, but this one is not in that list. It seems like it should be pretty easy for Microsoft to say what this does and when it can
be safely removed...
I figure one of two possibilities. Either this only matters when a specific feature is installed / active, or it is some remnant from development for a feature or implementation that didn't make it into the release to manufacturing. What ever the case it
would be nice if we could get clarification.

Similar Messages

I already subscribed for Rights Management, but can't I sign setting up Microsoft Right Management Sharing Application.

I already subscribed for Rights Management, why can't I sign in using Microsoft Right Management Sharing Application.
Ayman Saleh

Hi Ayman,
I see you have asked a similar question as me. My post is below:
http://social.technet.microsoft.com/Forums/en-US/de1ff57b-34a0-4970-b9e4-cd9854fc0772/rms-sharing-app-configuration-fails?forum=rmscloud
I have included details of the
aadrmprep_silent.log as mentioned by Eddie for my issue.
Would be good to see if you have the same issue as me.
Eddie - I have Windows 7 SP1 already. Do you have any other suggestions for why this
error might occur?
Thanks.

Looking for "Window Manager\Window Manager Group" SID

Hi. I am trying to find the SID for "Windows Manager\Window Manager Group". If anyone has that, I'd appreciate it. I am trying to build my "base build" Security Template for Server 2012, and I need to assign the default User Rights to that group, as it is
out-of-the-box. Problem is that the GUI does not accept that group name as valid, but I can see that the group is assigned user rights in the Local Security Policy. I typically just use a file ACL to do this (add the ACE and then run
icacls to get the SID), but that group name is not valid within that tool either. My guess if that this new "Windows Manager\Window Manager Group" group is a well-known SID. Thanks.

Ironically the SID is not listed on Microsoft's web page for well know
SIDs. I also noticed that when I dump the local users using powershell, every group and user is listed that I would expect to see, but this one is not in that list. It seems like it should be pretty easy for Microsoft to say what this does and when it can
be safely removed...
I figure one of two possibilities. Either this only matters when a specific feature is installed / active, or it is some remnant from development for a feature or implementation that didn't make it into the release to manufacturing. What ever the case it
would be nice if we could get clarification.

Looking for "Project Management" addon for SAP B1

I am looking for an addon that will take care of companies who are into Project Execution.
Kindly suggest some such addon & partner(preferably from India but not necessary) from where I can get this.
Kush

Hi Kush,
Check the following thread
Re: Does anybody can let me know about project managment addon?
SAP & Project Management
SAP & Project Management
*Close the thread if issue solved.
Regards
Jambulingam.P

What roles assignments for Rights Management?

System: Adobe LiveCycle Server ES3 system.
Question and Issue: I need to create a user that is able to manage the settings via the web administrator (adminui) for:
1. Policies
2. Documents
3. Events
4. Watermarks
However this user must not have the abiltiy to change the server configuration, key management, etc that is most of the stuff in the "LiveCycle Rights Management->Configuration" page except for "Watermarks".
I had assigned this user the following Role Assignments:
1. Rights Management Policy Set Administrator
2. Rights Management Invite User
3. Rights Management End User
4. Rights Management Manage Invited and Local Users
The above lists works for most part except this user is unable to configure/manage the Watermarks. The ability to configure/manage Watermarks is critical in our scenario.
I found that by assigning this user the "Rights Management Super Administrator" role, it would allow this user the "Watermark" capability; however it also allows the user other capabilities that we do not want the user to manage/configure. I believe the "Rights Manage Configuration" permission gives this role the ability to configure all aspects of the Rights Management.
So is there a permission that just allows the user the ability to configure just the "Watermark"? Is this configuration even possible?
Regards,
TS

Watermark is in the Configuration part of RM UI so as per current implementation there is no such role defined by which an user can configure the Watermark only.
It is designed as such because only an administrator can change such configuration and create or modify Watermark.

Looking for Solution manager SMI310_04 material

Can anyone please send me the solution manager material SMI310_04. I really appreaciate your help on this. I have an assignment at my work place to configure the SM.

Hi Ram,
If u r looking for Installation guides they are availoable at the following location.
https://websmp108.sap-ag.de/solutionmanager
Elese if u r looking for some scenario setup like service desk and CM, i hope its a small big fight.
But i suggest you check out the RKT roadmap as i am sure they would be hepful in ur activity.
http://service.sap.com/rkt --> Solution manager
If u have any specific requets other than this do post out so that i can help in any possible views formmy side.
If this info is helpful, please award points.
Bet Regards
Sri

Looking for document management software.

I am looking at document management software but can't seem to find what I need. I want something that creates a numerical file name for every document that I save that is automatically generated. In the PC world I know that Worldox does this but I cant seem to find something for the mac. I tried to get some help with this a while back when I was starting my business but had to make do with what I had and have been busy since then. Any help would be greatly appreciated.
the goal would be to open a new pages document and it was save as "00001" then if I scanned something in after that it would be "00002" then the next pages document would be "00003" and so on.

http://www.versiontracker.com/php/qs.php?mode=basic&action=search&str=document+m anagement&srchArea=macosx&submit=Go

Looking for "file management" program

All,
I am a collector of hundreds and hundreds of magazines, articles, etc. In recent times, I've been scanning articles from magazines and school books to digitize them.
I'm looking for a program that will allow me to "tag" files and file them accordingly (sort of like del.icio.us).
Any ideas?
Thank you,
Lindsay

LindsayB63,
Well, other than third-party software (and you have already received at least one recommendation there; will probably receive several more), a few things come to mind.
Off the top of my head, you could "tag" the resultant files with comments, or at least creative names, place them all in a central library (perhaps sorted into folders alphabetically or otherwise), then create a collection of "Smart Folders" to sort/show them according to specific criteria. You could have "standard" smart folders that are persistent, or you can use Spotlight at any time to create an "off-the-cuff" search for a particular criterion, or criteria.
In the end, your searches will only be as good as the system you develop when adding comments/keywords (given that your scans are probably images, not the results of OCR software). Which brings up another subject. If searching this content is important enough, you might want to invest in good OCR software, to convert the scanned images to real text. This text could then be searched directly, instead of second-hand via your comments and keywords.
Scott

Looking for right sound driver to downlo

The more I read the more confused I get. I Just installed Windows
vista (32 bit) and I do not get any sound? thrue the card so I thought that I would
update my drivers. I have a model # SB0570 which comes back to an Audigy SE.
But I do not know which file is the driver file I need for my sound card to work.
can someone post a link?

http://support.creative.com/downloads/<look here,the top driver looks to be the newest.

Lenovo G 500s Insyde bios brick looking for right filename for biosdata to recovery

Hey,
as you can read in the subject, ich bricked my bios V2.02 when i tried to flash a whitelist-free-bios to my notebook Lenovo G 500s.
Before i tried to update bios, i made a backup of my current bios in .rom format.
I used Andy's tool to get the right filename, the tool gave out: "VILG1X64.F?"
Then I copied the biosfile to a usb stick with activity-led several times with dirrefent filenames and fileendings:
VILG1X64. fd/rom/bin/bi
VILG1X64. fd/rom/bin/bi
VILG1X64. fd/rom/bin/bi
VILG1X64. fd/rom/bin/bi
VILG1X64. fd/rom/bin/bi
VILG1X64. fd/rom/bin/bi
1X64. fd/rom/bin/bi
VILG. fd/rom/bin/bi
Anybody with the same notebook, who knows which filename i need? Which file-ending is the right?
Some Info:
I also tried to use the .rom file from lenovo's .exe file bios update from official download centre.
Thank you!

Hi, I have an x120e and when I get into the BIOS > Startup > Boot, I see the following list:
Boot Priority Order
1. ATA HDD0 Samsung SSD 830 Series (my main disk)
2. USB HDD SanDisk Cruzer Fit (a tiny usb drive that is always attached and holds assorted files)
3. USB CD
4. USB FDD
5. PCI LAN
The device can indeed boot from a USB stick. I think you will have to follow this order of events: first attach the USB you want to boot from, yet boot only from your main hard drive, to let the system recognize the attached USB drive and put it in the Boot Priority Order list, then shutdown, restart and get into BIOS. F1: to either to change the ordering in the list to put USB FDD or USB HDD SanDisk first) or F12 (I think): to choose a temp device to boot from. Or....... (another thought), the USB you want to boot from hasn't yet been made "bootable" (I think you may have to go into diskpart > etc to set it active) so isn't recognized in BIOS.
I've used a USB flash drive with my recovery partition on it to restore to factory state. That was also a Sandisk Cruzer USB. I've also booted directly into a WinPE sort of environment using another bootable USB made for the purpose of restoring from system images. Mine is an x120e; your x121e can't be much different.
Cheers!

Looking for sound manager app

I've moved from a Droid to iPhone 4s and loving it and will never go back. However, I had an app on my Droid that allowed me to set the various sound volumes (phone, texts, notifications, etc) by time of day. Thus I was able to have them set at low volumes starting at 11pm and return to desired daytime volumes at 8am. I've searched the app store and have been unable to find an equivalent app for the 4s. Does anyone know of an app with this kind of functionality? It is sorely missed. Thanks!! Jim

There is no such app for the iPhone.
http://www.apple.com/feedback/iphone.html

Is the Global Document Storage (GDS) used in Rights Management?

I am setting up an Adobe LiveCycle ES3 server exclusively for Rights Management; and I am wondering if the folder for the Global Document Storage (GDS) will contain any files that need to be backup'ed in case for system recovery.
TS

Aayush,
Thank you for your response.
In the documentation:
"LiveCycle specific data:
Application data exists in the database and in Global Document Storage (GDS), and must be backed up in real time. GDS is a directory that is used to store long-lived files that are used within a process. These files may include PDFs, policies, or form templates. "
However, during my testings I don't see any file activities on the GDS folder such as file creation, deletion, etc. Under what Rights Management operations or scenarios would files, policies be stored in the GDS?
Maybe I am testing using the proper conditions?
TS

New window manager (with prototype!) [wmii-like] --- looking for help

I have a prototype for a new window manager in the style of wmii. It is called
cakewm. I currently have a prototype version implemented in pygame, and would
like help moving this to use X---making it a real window manager.
Disclaimer: I have a very limited knowledge of X11 and window manager
development. The most I've done is add a couple new features to wmfs.
To get the code
> git clone git://github.com/saikobee/cakewm.git
Then run main.py. cakewm depends on pygame.
Upon running, press Alt-Enter to fullscreen cakewm and intercept keybinds, or
Alt-Space to just intercept keybinds. Press Alt-Esc to quit. The window
manager related keybinds are listed in the file binds.conf.
Config note: <WSCA-x> means Windows-Shift-Control-Alt-x
Implementation note: pypixel.py is a large and mostly useless dependency. I
forked a library I made previously rather than coding straight in pygame.
cakewm's goals are to be similar to wmii, but with more functionality, easier
configurability, and saner defaults.
- cakewm is fully functional using the keyboard. Mouse support can come later.
- cakewm provides 9 workspaces per monitor.
- cakewm manages each workspace as a group of columns. Each column is like a
wmii default split, except each window can have other windows "stacked" on
top of or behind it.
- cakewm manages column sizes (and window sizes within columns) using a
master/slave paradigm, with the ability to adjust the size ratios.
- cakewm's configuration file is simple key=val pairs, with the ability to
include other files like in C.
- cakewm has a slightly larger emphasis on window decorations (adjustable
size---even in tiled mode) and themes (nothing bloated, like pixmaps or
gradients---it's all still simple colors).
- cakewm will have proper support for international text (Japanese text in
window titles or the wmii status bar generally render as boxes) through the
use of a more advanced text library such as Pango.
Please let me know if you have comments, questions, or concerns. If you are
interested in helping, get in touch with me. If you know somewhere better to
look for volunteers, please let me know.

m4co wrote:
Wow is this forum active. Makes me feel welcome here
The thing about wireless, I actually like command line, but there are a few things that are worth having a applet or something.
And wireless is one of those. I guess I can take a look on wicd.
It's a good idea to have compiz as the WM actually. Would it be lightweight to have it like that?
Is there anybody here that uses compiz as a WM?
For the xfce4-panel, is it possible to get transparency on it? That's probably the only thing holding me back with xfce4-panel.
If "able to run compiz" wasn't a requisite, what other WM would you suggest for my "profile" ?
I would like to hear other users opinions who like to customize everything on a WM.
I recommend running Compiz by itself. There is a good wiki page on it in the Arch wiki. Some apps you'll want to go with it are:
LXAppearance --change GTK/icon theme
Feh or Nitrogen --Set Wallpaper
Xfce4-panel --The lightest one that works with Compiz properly
Or, if you don't want a panel: stalonetray
Compiz-deskmenu --For a customizable right-click main menu
Gmrun --Run dialog (Alt+F2 in most DEs)
And this helped me a lot.
Thank you all for the replies. I appreciate.
Xfce4-panel can have transparency. The only problem is that everything become transparent: text, icons, everything.
I use Compiz as a standalone WM and it is much lighter than DE+Compiz. My Compiz setup uses about 30MB(out of 1GB) more RAM than my Openbox setup (which are both the same except for the WM).

Adobe Reader for iOS and Android & Rights Management

This week's release of Reader for iOS and Android devices incorporates support for accessing files secured by Adobe LiveCycle Rights Management.
As you are probably familiar, LiveCycle Rights Management protects sensitive documents by encrypting them with industry-standard AES encryption and enabling central management of their access permissions. Protections persist even when documents are accidentally distributed via email, the cloud, or saved on a lost mobile device.
Many of the core capabilities that you are used to on the desktop versions of Acrobat and Reader are now supported when you are on the go on your tablet or mobile phone. We intend to incorporate additional functionality in future releases of these mobile devices and look forward to your feedback.
We've had several questions thus far about how this works. More information about the product, as well as a link to an FAQ can be found at:http://blogs.adobe.com/security/2011/10/just-released-adobe-reader-10- 1-for-ios-and-android.html
Jonathan

Hello Jonathan,
is there an way to trigger iOS download to immediately open using "Adobe Reader"
instead of using the default Previewer (showing an plain empty white window) and then re-open it using "Open with" ?
Is there an MIME-Type to indicate IRM-protected PDF-files?
Thanks,

Looks like small data discrepancy in hr_api_transactions.transaction_document for Talent Management

Hi,
I have some problem with the XML data in transaction document for Talent Management
Unable to perform transaction on the record.
Cause: The record has deleted by another user
When checked manually from back end, there objectives (IDs) that are there in XML type, aren't there in per_objectives table. The error seems right.
My task now is to find how many cases(objectives) are there like this. Logic is, look for objectives (that are marked as Update/Delete) in XML and find the ID existing in per_objectives or not. I could make-up the SQL for listing all objectives as a table result as below:
select
   extractvalue(VALUE(xx_row), '/ObjectiveEORow/Name') AS objective_name,
   extractvalue(VALUE(xx_row), '/ObjectiveEORow/ObjectiveId') oid
from hr_api_transactions txn,
       TABLE(xmlsequence(extract(xmlparse(document txn.transaction_document wellformed),'/Transaction/TransCache/AM/TXN/EO/ObjectiveEORow'))) xx_row
where extractvalue(xmlparse(document transaction_document wellformed),'/Transaction/TransCtx/TransactionRefId') = '26308'
and txn.transaction_id = 1946469;
Problem now is, to distinguish only the PS="3" (Delete) and PS="2"(Update) objectives. This table doesn;t show the PS attribute of the "ObjectiveEORow" node in XML.
               <ObjectiveEORow PS="3">
                  <ObjectiveId>1813772</ObjectiveId>
               </ObjectiveEORow>
Please help me in making the SQL show the XML attribute "PS" value for node "ObjectiveEORow".
regards,
Raj.

I could get the solution. Thanks everyone !
select 'E'||ppf.employee_number employee_number,ppf.full_name,txn.transaction_document,txn.transaction_id, i.*
from per_all_people_f         ppf,
      per_personal_scorecards psc,
      hr_api_transactions      txn,
         xmltable('/Transaction/TransCache/AM/TXN/EO/ObjectiveEORow'
            passing xmltype(transaction_document)
            columns
             PS varchar2(800) path '@PS',
             oid number      path 'ObjectiveId'
            ) i
    where txn.transaction_ref_table = 'PER_PERSONAL_SCORECARDS'
    and psc.scorecard_id = txn.transaction_ref_id
    and ppf.person_id = psc.person_id
    and trunc(sysdate) between ppf.effective_start_date and ppf.effective_end_date
    --and psc.plan_id = 146
    and i.ps in ('2','3')
    and ppf.employee_number in ('4018','5072','6389')
    and not exists (
       select 1
       from per_objectives o
       where o.objective_id = i.oid)
regards,
Rajkiran.

Looking for rights manager

Similar Messages

Maybe you are looking for