Looking for sample SharePoint Intranet Governance Plan

Hello,
Do you have any examples of SharePoint Intranet Governance?  I worked at a small company with SharePoint 2010, about 100 light usage users and 10 heavier usage users. 
Thanks,
Paul
Paul

Microsoft has a Governance Planning whitepaper you can download:
http://technet.microsoft.com/en-us/library/ff848257(v=office.14).aspx
Brandon Atkinson
Blog: http://sharepointbrandon.com

Similar Messages

  • Request for Sample SAP Archive Project Plan

    Dear SAP Practitioner
    My firm is in the mist of planning for SAP Data archiving project. We are looking for sample SAP Data Archiving Project plan and other related documentations. We sincerely hope that you can share for the knowledge of our firm and the rest of the community.
    Regards
    Leonard
    Message was edited by: Leonard Tan

    Hi Kenny,
    Whenever you create a custom (Z) idoc type and want to trigger idocs for it you would need to use the MASTER_IDOC_DISTRIBUTE function module for the same.
    Hence to get some sample programs just do a <i>where used</i> on this function module.
    Hope this helps. Also please refer to the link below:
    <a href="http://">help.sap.com/saphelp_erp2004/helpdata/en/78/21783151ce11d189570000e829fbbd/frameset.htm</a>
    to understand more about not only creating the outbound program using this function module but also about the related SPRO and other configuration.
    Regards,
    Aditya

  • Looking for sample ANT files for building workshop webservice app outside the IDE

    Hi,
    I am currently planning to use Workshop for implementing a webservice application.
    I am looking for any sample ANT files that would enable me to build and deploy
    both the webservice EAR and the client JAR outside the IDE.
    Thanks,
    Bao Nguyen

    Hi Raj,
    Yup, I did see that sample file. However, it only demontrate how to build an
    EAR file. I am also looking for samples of how to generate the client JAR (using
    proxy to gain access to the webservice) and also how to deploy the web service
    EAR file to the server.
    I tried to use the ANT tag "clientgen" referencing the generated EAR file. It
    complainted of the missing WAR file. I checked the content of the EAR file and
    found no WAR file generated.
    I am also looking for a better way of accessing the webservice more generically
    instead of going through the proxy which is quite coupled to a specific app server.
    Please provide examples.
    Regards,
    Bao Nguyen
    "Raj Alagumalai" <[email protected]> wrote:
    Hello Bao,
    Please refer to my post "Ant script for building EAR "dated August 21
    2003.
    I have attached a sample which does this.
    http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.workshop&item=1285&utag=
    Thanks
    Raj Alagumalai
    WebLogic Workshop Support
    "Bao Nguyen" <[email protected]> wrote in message
    news:3f61477e$[email protected]..
    Hi,
    I am currently planning to use Workshop for implementing a webserviceapplication.
    I am looking for any sample ANT files that would enable me to buildand
    deploy
    both the webservice EAR and the client JAR outside the IDE.
    Thanks,
    Bao Nguyen

  • Looking for sample code of HOW-TO use EntityFacadeImpl class

    I have created the following using JDeveloper Ver 9.0.3.1:
    1. Entity Bean
    Localinterface: userLocal.java
    Local home interface: userLocalHome.java
    Remote interface: user.java
    Remote home interface: userHome.java
    Bean implementation: userBean.java
    2. Facade Session Bean (auto generated by JDeveloper)
    userFacade.xml
    userFacadeColImpl.java
    userFacadeImpl.java
    I am looking for sample client code on how to make use the facade session bean.
    Thanks in advance.

    repost

  • Looking for samples of JKM and RKM

    Hello everyone!
    I'm looking for samples of JKM and RKM.
    Do You have it?
    Best regards

    Hello
    Now I have found them.
    It was placed on oracledi\impexp.
    Thank You for right direction!
    Best regards

  • Looking for sample code using "first_tab" and "next_tab"

    Looking for sample code using "first_tab" and "next_tab". How is it used with ItemID within a dialog box? I've read the reference books - don't understand it.

    Hi Ray,
    There are several ways to do this, and in the example I created, I actually did not end up using shift registers. I've attached some example code that basically multiplies the period by the duty cycle percentage to achieve the number of milliseconds to be high and low.
    You would just need to insert your DIO code in each frame of the sequence structure.
    Hope that helps. Kind regards,
    -Sam F, DAQ Marketing Manager
    Learn about measuring temperature
    Learn how to take voltage measurements
    Learn how to measure current
    Attachments:
    70_PWM_Example.vi ‏23 KB

  • Looking for sample code of pwm output with Labview 7

    we are looking for sample code in LabView 7 for producing a pwm output. We are current using a 3rd party digital I/O board and just want to generate a pwm output on several of the bits.

    Hi Ray,
    There are several ways to do this, and in the example I created, I actually did not end up using shift registers. I've attached some example code that basically multiplies the period by the duty cycle percentage to achieve the number of milliseconds to be high and low.
    You would just need to insert your DIO code in each frame of the sequence structure.
    Hope that helps. Kind regards,
    -Sam F, DAQ Marketing Manager
    Learn about measuring temperature
    Learn how to take voltage measurements
    Learn how to measure current
    Attachments:
    70_PWM_Example.vi ‏23 KB

  • Looking for sample template with the check on the bottom of the page

    Customer is looking for sample template with the check on the bottom of the page, anyone know of one? Their Bank doesn't like the check on the top of the page because when you rip the check from the stub is sometimes rips the microline. -Thanks

    Hi Dale,
    Check this one(template attached) : http://blogs.oracle.com/xmlpublisher/2006/04/13/#a12
    You just need to flip the invoice and check position,..
    regards..

  • Looking for Customer Collateralson Local Government for Financial Mgmt

    Hi. I am actually asssisting my manager to look for customer references particularly from eBusiness Suite which related to local government or municipal council. I am actually in CX, so I may not be familiar with the Financial Mgmt offering from EBZ. This opportunity I am currently covering is interested to know the solutions below which I have tried to map out with the products offered under EBZ
    Credit-to-Cash > Oracle Receivables
    Procure-to-Pay > Oracle Payables
    Financial Control and Reporting > Oracle General Ledger
    Financial Control and Reporting > Oracle Hyperion Financial Management
    Cash and Treasury Management > Oracle Cash Management
    Budgeting > Oracle Hyperion Public Sector Planning and Budgeting
    Procurement > Oracle Advanced Procurement
    Contracts > ???
    Project Accounting > Oracle Projects with Oracle Sub-ledger Accounting
    Investments > ???
    Most importantly, I am trying to find reference to local government who have used the products above. Appreciate if anyone can throw me some information/lead. Preferably around the ASEAN region primarily Malaysia and Singapore.

    You should contact the Oracle sales folks in your city / country - they should be able to get you connected with any references.
    http://www.oracle.com/us/products/applications/ebusiness/ebs-r12-1-booklet-sept-2011-1355209.pdf
    HTH
    Srini

  • Beginner looking for sample code

    Hello Mobile Developers,
    Just got my Flash Builder 4.5 two days ago. I have some Flex and Objective-C experience. I am looking for some example code
    showing me how to build a simple "ActionScript Mobile Project" for the iPad. Any links or snippets are welcome.
    Is it possible or planned to be possible, to build a native Objective-C Project in XCode and include the ActionScript/AIR features as a Library or
    Framework, so that one could mix native UIKit Views with others based on ActionScript ?
    Or is it possible to implement ActionScript wrappers around native code ?
    Regards,
    Dirk

    Hi,
    Just tried the sample with my Flash Builder 4.5 - without success. The project references a Flex SDK named "superhero". I changed that to Flex 4.5
    which is the one that came with Flash Builder.
    It seems that the project requires AIR 2.7. Which Flex SDK do I need to run this example ?
    Regards,
    Dirk

  • Looking for sample code to create my own pub/sub!

    I am a new bee in JMS. So I would really appreciate if
    some one could give me some hint to start up with my school project. I am looking for a sample Java code that will:
    For the Publisher:
    1. Connect to a broker [create it, if it does not exist]
    2. Create a publisher/destination.
    3. Create a pub-sub queue
    4. Publish a message
    5. Ack or Nak depending on if the subscriber got or did not get the message.
    For the Subscriber:
    1. Connect to a broker [create it, if it does not exist]
    2. Subscribe to the broker
    3. Subscribe to the Queue
    4. Show an received messages on the console.
    Here are the command line params for both the Publisher and subscriber:
    runPub 127.0.0.1:7676 myTestBroker myQueue "this is my message"
    runSub 127.0.0.1:7676 myTestBroker myQueue
    Please tell me if there are similar java code that will do all this and work with ANY JMS compatible client. i.e. I should not have to use the Admin tool of any JMS Server (MQSeries, iPlanet, SonicMQ etc etc). The code should follow the JMS spec and do this programmatically.
    Thank you very very much in advance for doing this great favor.
    With regards,
    Amir.

    Thanks a lot for that hint. I think that's a great tutorial for a beginner. I could compile those sample codes from chapter 4 with out any problem, but could not run it. I also installed j2sdkee1.3.1 and updated my classpath according to the spec. But when I tried to run the "j2ee -verbose" command it was giving me the following error message:
    ERROR: Set J2EE_HOME before running this script.
    Any advise for me that I should follow next. Thanks again.

  • Looking for comment on disaster recovery plan

    Looking for some comment on where we are and where we’re planning on going with our Continuity of Operations / Disaster Recovery plan.
    Current setup is Oracle 10.2.0.2.0 on HP-UX Itanium 64-bit. OAS / Forms 9i on a separate HP-UX Itanium box. We do not have control over the version of Oracle or the hardware. I am pushing the powers that be on upgrading to 10.2.0.4, but am not holding my breath.
    Basic backup is threefold. DB is in archivelog mode. RMAN full backup is taken weekly. Incremental backup taken daily. These backups are to disk. In addition, a daily full-system backup (to tape) is done with the db shut down, providing a daily cold backup as well as backup of the online backups. Also daily exports – full and schema specific.
    All db files are on an HP SAN unit. SAN replication software is used to mirror all i/o to a similar unit located at a sister site. Likewise, they replicate their SAN to ours. Each site has a pair of backup servers to be used by the other site if needed. Sister site has already tested loading our backup servers, mounting the mirror of their SAN, and starting the db.
    Since sister site is a couple of hours away and crosses major network boundaries, management would like to also put up a DataGuard standby at a facility only 30 minutes away and within our own network. Plan is to host that on duplicate HP servers, but disk would be on a NAS instead of a SAN.
    I have managed a DataGuard setup, but did not create/configure it, so am now digging into the docs, starting with the DataGuard Concepts. I’ve never worked with NAS and am not clear on how it differs from SAN, and what the implications are.
    I'm looking for any comment, especially any red flags, on what I’ve described.

    Satish Kandi wrote:
    Not an expert comment on your setup but just the thoughts that came to my mind while reading this...
    1. What is the setup for backup preservation? Is it in one of the servers only? Is the backup also replicated?Belt and suspenders. The backup location on disk is part of what gets mirrored to the sister SAN. Plus, the nightly system backup to tape picks it up as well.
    2. What about OAS/Forms 9i backup? You have not mentioned anything about that.That is also mirrored to the sister SAN.
    3. What is the archive log generation frequency? Or how much data loss can you afford?A typical day will see one or two dozen archivelog files.
    >
    In addition, a daily full-system backup (to tape) is done with the db shut down, providing a daily cold backup as well as backup of the online backupsLucky you :-) but I don't see a need for this with the levels of backup that you have (especially with RMAN weekly backup and daily archive log backup). No, no need, but it does give us another layer at no real cost. This cold backup is really just a byproduct of a daily full system shutdown and backup. We have a high tolerance for system down time, but low tolerance for data loss.

  • Looking for sample code to decrypt MYSAPSSO2 session cookie

    Hello,
    I am looking for a sample code to decrypt MYSAPSSO2 session cookie and get the username out of it.

    Hi Roy,
    if you just need the username the easiest way is to grab the Cookie and Decode it using Base64. The username is contained in cleartext.
    e.g.
    MYSAPSSO2 Ticket as fetched from Browser:
    AjExMDAgABFwb3J0YWw6bXRyaWNhcmljb4gAE2Jhc2ljYXV0aGVudGljYXRpb24BAApNVFJJQ0FSSUNPAgADMDAwAwADRDAxBAAMMjAwODA3MjUwNTA3BQAEAAAACAoACk1UUklDQVJJQ0%2F%2FAQUwggEBBgkqhkiG9w0BBwKggfMwgfACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB0DCBzQIBATAiMB0xDDAKBgNVBAMTA0QwMTENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMDgwNzI1MDUwNzU5WjAjBgkqhkiG9w0BCQQxFgQUxUGK!5EDTrHQErPQCVJhEySzTBAwCQYHKoZIzjgEAwQvMC0CFQCD3K2A2hrgpNa5EceiDXjRN309ewIUTM3DJi8QTxmk%2FJez!rjnFlTM3BQ%3D
    Decoded Ticket using Base64:
    1100 uFFFD portal:mtricaricou02C6uFFFD basicauthentication uFFFD
    MTRICARICO uFFFD 000 uFFFD D01 uFFFD 200807250507 uFFFD uFFFDuFFFDuFFFD
    If you want to do it programmatically using any libraries to completely decode the ticket, check the validity and also access the certificate information inside the ticket you can use a SAP Extension called SAP SSOEXT (Goto service.sap.com/swdc and search for SSOEXT => The package also contains documentation and samples for various programming langauges such as JAVA).
    This one needs dynamic libraries or shared libraries to be linked.
    There also is a pure JAVA approach.
    Have a look at this:
    http://www.zope.org/Members/Dirk.Datzert/MySapSsoSupport/
    But:
    The approach of decrypting the cookie does not really make since when you are in a SAP system it is more intended for 3rd party systems in order to implement SSO.
    Hope this helps
    Cheers

  • How can I limit which hard drive partitions Logic looks for samples in?

    Hello.
    I have my internal hard drive set up into two partitions, one for running Logic 8 on Snow Leopard and the other for running Logic X on Mavericks.  I wanted to keep these two worlds separate to prevent any kind of incidental changes to one environment from affecting the other for the sake of pristine preservation.  In short, all my samples are located on each of the two partitions.
    Is there a smart way to prevent Logic from scanning the other OS partition for samples or other system files?  I want to keep these two worlds separate as a control so neither end up breaking the other.  I am cautious about setting up permissions to lock myself out of the other partition while I'm in either of them.  I'm afraid that I somehow wouldn't be able to boot to the other one (I've had some alarming experiences with drive permissions in the past).
    It is annoying to have Logic find several instances of instrument samples and to be prompted each time.  Also, I want to prevent them from seeing each other just to be on the safe side.  Any suggestions would be greatly appreciated.  Thank you!

    Your best bet is to exclude the SL disk from Spotlight in Mavericks, and exclude the Mavdisk from Spotlight in Snow Leopard - as Logic uses Spotlight to locate samples. You can also drag individual folders to that list, if you wish.
    You exclude disks and folders from Spotlight indexing by dragging them onto the Privacy list in the Spotlight control panel.

  • Looking for sample code - version control

    Do you recommend a resource where I might find sample code or opensource for basic Windows file version control? I want to be able to compare two directories (and their subdirectories) for file name, creation date, and size. Thanks.

    File size is in no way accurate to compare to files together for changes.
    You'll want something like a CRC32 checksum.
    This basically takes any sized file, and generates a "mostly random and unique"
    string of 8 hex chars. The odds two different files having the same CRC32 value are supposed to be 2 ^ 32... ie. about 4 billion to one against.
    I posted code here to generate the CRC values.
    http://forum.java.sun.com/thread.jspa?forumID=31&threadID=641367
    So you generate the CRC values for each file in the directory.
    Then, when you generate the CRC32 values the next time you visit, you can compare the previous value with the current value to detect if a single file has changed.
    regards,
    Owen

Maybe you are looking for