Looking for SAP solution to extract data from the production system

Hello,
we are looking for the SAP standard tool to extract data from the production system and copy it to the development system. It should be as functional as some kind of partial client copy. The data, which we need to replicate is master and transactional data from FI, CO, AA MM and nice to have FS-RI modules. There is a product offered by the IntelliCorp called "Data Management" but we would like to know if SAP offers its own product.
Kind regards,
Krzysztof Murkowski

Hi,
SAP offers a solution called 'Test Data migration Server' or TDMS.
You can access the master guide from the below link:
https://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006332942006E
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx.

Similar Messages

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

How to extract data from the fields present in two or three tables

Hi Experts,
I have a scenario where i have to extract data from the fields of different tables. e.g. let there 2 tables which have some number of fields . I want the data of 3 fields each from these 2 tables. How can i get that??
Sam

Hi
You can create view in tcode se11..
here you include all tables from which you want to fetch the data..
you need to give selection condition here
eg..
say select empname from table A, select empadd from table B.. where empno(from A)=empno(from B)
(note that you dont need to write queries like this.. i have just given u the example)
After creating the view you can create datasource in RSO2..
Regards
Swati

How to extract data from a remote system

Hi,
I want to extract data from another system and map it with a target table in my local machine. what is the procedure to do that?
I tried to create another module specifying location of that remote system I could extract the table but when I am mapping with the target table I am getting this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_LOCATION_UBN_15
ORA-00604: error occurred at recursive SQL level 1
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from UBNDW@ORACLE_LOCATION_UBN_15
here ORACLE_LOCATION_UBN_15 is the location and UBNDW is the SID for that system
SCOTT is the username I have provided while creating the module
Please help me out with this..
Thanks

Hi Roberto,
thank you for the fast answer. I have read this before but i don't understand the needed steps on the Oracle-System.
Hope anyone can help me...
Thanks
Muammer
Message was edited by:
Muammer Kizilaslan

Extract data from Retai & AFS system

Hi , Guys,
If there are SAP Retail & AFS system with different master data and transactional data , how can I extract master data and transactional data from these two system into SAP BW?
For example , if i want to extract the stock management data , how do I create the two Souce system in BW, both as SAP souce system or not?
Thanks !

Hi Yong,
1. Should I create both systems as SAP source system or not?
Yes, both should be created as SAP source systems.
2. If I want to extract the master data of 0MATERIAL , should I do the extraction job from the two source system with "0LOGSYS" ?
You have to understand the business process of how material master data flows across these two systems with the help of the functional team.
In our scenario, we have not used '0LOGSYS', because the same material code coming from both the systems were one and the same.
3. If I want to extract the transactional data of stock movement data from both systems, which infocube in BI content can I use?
I suggest you implement standard business content ( 0IC_C03, I guess ) and utilize that for one source system ( Say AFS). Copy this cube into Z cube called ZIC_C03 and connect the retail data sources to this cube. If you want to combine stock reporting from both the systems, you can create a multiprovider on top of this.
Thanks,
Krishnan

How to Extract Data from the PDF file to an internal table.

HI friends,
How can i Extract data from a PDF file to an internal table....
Thanks in Advance
Shankar

Shankar,
Have a look at these threads:-
extracting the data from pdf file to internal table in abap
Adobe Form (data extraction error)
Chintan

Extract data from the fields in Acrobat Reader 7.0 using VB

I am looking for a way to extract fields values from the pdf file using VBA for Excel. I have Acrobat Reader 7.0. I have a script that would extract fields values from the PDF using Aformaut.fields.... But this script only works with Acrobat.Standard or PRO. When I am trying to instantiate/create Aformaut.app object I am getting an error message stating that ActiveX cannot create such object. Please advise.

Five months have passed, so it's unlikely this reply will help the
original poster. But should anyone be searching the archives, here's a
reply anyway.
Aformaut.app is part of Acrobat Professional. You have to buy that,
you can't script this in the free Adobe Reader.
Aandi Inston

0CRM_SALES_ACT_1 takes a long time to extract data from CRM5.0 system

Hi Team,
We are having CRM 5.0 and BW 701.
We are extracting data from CRM to BW using extractor 0CRM_SALES_ACT_1 in CRM. But it is taking long time.
Please suggest what can we do to improve the performance.

Hi,
its depend on the data volume its take a time along with CRM server.
during your load time if crm server was busy then it may delay your load.
Need to trigger your load where less burden on servers(CRM/BW).
While triggering before please check available application servers to process your request at SM50.
if this full load and have huge data then please split your loads with selections and load them into bw.
you can increase processing records count and info pack wait time at info pack level.
go to info pack--> menu scheduler--> wait time and datas setting for data transfer.
during your load time ask basis team to keep on eye at T code - SM58(CRM).
Thanks

I can not get apple air play to work. I have down loaded three diffrent apps looking for a solution none of them were the right one. I spent over $10 in these apps. Can I get a refund. Do I need apple tv to run air play?

I can not get apple air play to run from my iTunes to my WiFi reciever.
I have spent money on 3 different apps looking for a solution.
None have worked. Can I get a refund?
Do I need apple Tv to work Air Play?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer.

How can i get data from the other system?

hi,
i want get some data from the other r3 system in my r3 system? now this two r3 system are installed two server.

Hi,
U can achieve this by RFC function module...
create a function module and make it as REMOTE ENEBLED IN ATTRIBUTES TAB..
for example i have to r/3 systems as A and B.
I want to get data from B system..
so create the FM in B system and then in A SYSTEM u have to call that one ,like this....
DESTINATION NAME IS FOR SYSTEM B.
CALL FUNCTION 'ZRFC' DESTINATION <DESTINATION NAME>
EXPORTING
IMPORTING
TABLES..
Regards,
Nagaraj

Error 8 while loading the data from the souce system

Hi Gurus
Every day we are loading some data from one of our souce systems through process chain
But today all the loads failed complaining about error 8 while extacting the data
connection to source system is fine
we have the problem while loading master data from the same source system
any solution?
Thanks in advance

Hi,
Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
hope it helps...
regards,
Raju

Any way to extract data from the "Organizer" database?

I asked a similar question in the Lightroom forum but I'm asking it here as well. I'm thinking of either getting Lightroom or Elements but my only concern is being able to access to all of the meta-data that I tag my photos with in the "Organizer". Most likely I'll spend hours organizing my photos and I want to be able to access this data from outside the organizer for read-only purposes.
I realize that from inside of orgainizer all of this is available to me but I want to be able to use other tools and apps (that I'll write myself when needed) to get access to my photo catalogs.
Does Adobe have any sort of API or library that 3rd party apps can use to access the data in Organizer? I searched the Adobe web-site but didn't find anything. Ideally I could run a SQL query against the database to get what I want.

This idea intrigued me, so a did a Google search on "extract photo metadata", which resulted in some interesting links.
You might want to investigate some of these further.
One which looked quite interesting along the lines of the read/write of metadata can be found here:
http://devzone.zend.com/article/4025
Good Luck...

ABAP Client proxies: extract data from the response and update Z table

Hi All,
I have following ABAP code for client proxies:
We have DT_Req, MT_Req, DT_Res, MT_Res and MI_Sync_OB (O/p Message: MT_Req, I/P message:MT_Res)
Proxy Objects generated:
ZCO_MI_SYNC_OB
ZMT_REQ
ZDT_REQ
ZDT_REQ_RECORDS
ZDT_REQ_RECORDS_TAB
ZMT_RES
ZDT_RES
ZDT_RES_RECORDS
ZDT_RES_RECORDS_TAB
ABAP Code:
REPORT ZTEST_DELETE.
DATA:
lo_history TYPE REF TO ZCO_MI_SYNC_OB,
lo_sys_exception TYPE REF TO cx_ai_system_fault,
Structures to set and get message content
lv_history_req_mt TYPE ZMT_REQ OCCURS 0 WITH HEADER LINE,
lv_history_res_mt TYPE ZMT_RES,
lv_history_req_rec TYPE ZDT_REQ_RECORDS,
lv_history_res_rec TYPE ZDT_RES_RECORDS.
lv_history_req_rec-VLAUE = SY-DATUM.
APPEND lv_history_req_rec TO lv_history_req_mt-MT_REQ-RECORDS.
CREATE OBJECT lo_history.
TRY.
Call outbound Proxy
CALL METHOD lo_history->execute_synchronous
EXPORTING
output = lv_history_req_mt
IMPORTING
<b>input = lv_history_res_mt.</b>
Error handling
CATCH cx_ai_system_fault INTO lo_sys_exception.
SKIP 2.
WRITE:/ lo_sys_exception->errortext.
RETURN.
ENDTRY.
<b>Now I have my response data in the internable "lv_history_res_mt-MT_REQ-RECORDS" which is deep structure.
How do I extract data records (multiple) from the above internal table and update to Z table??</b>
Thanx
Navin

Hi Navin,
go to SPROXY, flag structure and search for your table definition. You will find a table definition a field "line" or something, where you find the right structure. Create a new structure with DATA: myStructure type tableStructure. Define a second structure type with your Ztable. Next Loop at internal table into the structure. Inside that loop fill the Zstructure. Insert the Zstrucure (Press F1 on insert to have the syntax you need)
loop at internalTable into intStructure.
zstructure-myField = intStructure-myField.
INSERT ztable FROM zstructure.
endloop.
Regards,
Udo

How to extract data from the XL sheet for mapping

Hello all,
I have a scenario of file to idoc, where in the source file contains the information in XL sheet. Can we access the XL sheet data for mapping ? if so can anyone helpme providing the procedure.

Hi,
For reading an XL file u need to write an java code.
refer the below weblog for more help:
SAP Network Blog: XI: Generating Excel files without the Java nor the Conversion agent not possible?
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
SAP Network Blog: Read Excel instead of XML through FileAdapter
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
Thnx
Chirag

Extracting data from R/3 System table

Hi,
Currently, I am reading table data using RFC_READ_TABLE function module. but I want to achieve same thing using the Open hub services. There is so much of information about infoSpoke/open hub etc. But couldn't understand how to specify the target table and the query parameters etc. It would be of great help if somebody can point me to the correct document which describes all the steps.
Thanks,
Kranthi

Hi,
[check this out|http://help.sap.com/saphelp_nw04/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm].
Siggi

Looking for SAP solution to extract data from the production system

Similar Messages

Maybe you are looking for