Looking for Schnappi video clip

Hey all,
Looking for the Schnappi or Ein Llama video clip for my son....
Can't seem to find it anywhere!
Any help would be greatly appreciated
  Windows XP  

Thanx Dave for verifying - I always have been to lazy to install the WMP on my Macs.
-kay
btw. there is a 30 sec QT file at http://www.video-c.co.uk/videovaultwatch.asp?vidref=schn003
Be careful! Watching this clip -imho- might cause a severe brain damage

Similar Messages

  • How do I display the complete time sequence for a video clip in iMovie?

    How do I display the time complete time sequence for a video clip in iMovie?
    I'm trying to create a movie for someone where they provided me the video clips and what time sequences they want extracted.  For example:  Video footage from time 5m22s to 9m:18s and 11m17s to 15m31s from the imported video clip.  I know you can select video but I cannot figure out how to select from those requested time markers.
    Any help would be apreciated.

    Open the file using QuickTime Player and then open the Movie Inspector window.

  • Sound/audio is off for news/video clips Mac Pro , ML

    sound/audio is off for news/video clips Mac Pro , ML

    >certain clips
    What ARE those clips?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For Mac http://mediainfo.massanti.com/
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

  • I had a friend airdrop a video to me last week from her iPhone and I saw it on my iPhone after the upload was complete. I'm looking for the video now and can't find it anywhere on my phone. Where is it and/or is it stored on my phone?

    I had a friend airdrop a video to me last week from her iPhone and I saw it on my iPhone after the upload was complete. I'm looking for the video now and can't find it anywhere on my phone. Where is it and/or is it stored on my phone?

    I airdropped the video again and it now shows up in my camera roll.

  • Looking for easy videos to teach someone OS X

    My uncle just got his first computer and I am looking for something to teach him all about his new Mac. Im thinking something like the video professor you see on tv only for Tiger.
    I have seen the videos on Apples site but they are all for the ilife suite which is nice but I am looking for something with videos on the little things like how to get on the internet, how to write an email, how to move files, etc... The only other site I have found is the Atomic Learning site but there is alot of things there he will never need like automator and voiceover, etc...
    I am also only looking for free videos not paid services or purchases. Thanks all!

    EDIT: This reply should have been to tbharber.
    There are some free video Tiger tutorials.
    Also, Apple has some topics/tutorials on their Mac 101 site and Switch 101 with some QT videos.
    Hope these help.
    -mj
    [email protected]

  • Preloaders for my video clips in Dreamweaver

    I’ve been trying to get a Preloader to work with my
    video clips playing in Dreamweaver. I have many short video clips
    on my site, from 1 to 3 Megs starting up as their download is
    completed. I’d like to have a pre-loader give my viewers a
    heads-up that video is coming, but I haven’t been able to
    make it happen yet. I've been through the tutorials and getting
    closer.
    In Scene 1 (titled: loader) I’m using a simple
    "LOADING..." animation I made.
    In Scene 2 (titled: main) I have the video clip, sized to fit
    the table in Dreamweaver with a URL linking to the full video on
    the web.
    Here’s the code that I’m using and the error
    message:
    Whatever assistance you can offer will be greatly
    appreciated, thank you for looking it over.
    LB

    The problem seems to be solved and the scene method is
    working well! I put about 14 clips with pre-loaders attached up on
    my site within Dreamweaver. Sometimes the clips are loading fast
    and I don’t need to have each clip display a pre-loader.
    I’m still working out the details on another preloading
    file that has a row of pictures attached which is requiring more
    coding - I’m trying to figure this out now.
    I want to thank two mentors who have helped me reach this
    level so far: Craig at LearnFlash.com & Dzedward, Senior Member
    at Adobes forums.
    Thank you again very much!!
    Here’s the coding I was instructed to use:
    stop();
    myInterval = setInterval(preload,100);
    function preload() {
    if (_root.getBytesLoaded() >= _root.getBytesTotal()) {
    gotoAndStop("main", 1);
    clearInterval(myInterval);
    Sincerely,
    LB47
    ChabadVideos.com

  • Looking for Simple Video & Audio Player

    Hello,
    I am very new to Flash so any help would be greately appreciated.  I am looking to add video and audio clips to my movie.  I want the player to be a part of the movie and not just embedded in a web page.  Is there a place where I can:
    1. Download free players to be used within the movie
    2. Get some detailed instructions on how to accomplish it.
    Thanks for any help.
    Craig

    flash packages a fully functioning player with a variety of skins (and you can customize the skins and make your own) in the components panel called an flvplayback component.

  • Playhead info for imported video clips is static/constant in iMovie 9 as I scroll over the clips. Is it possible to make it display correct info?

    HI, I have been importing videos clips from a SD card to iMovie 09. These clips are analyzed for animal behavior and the timing information for a specific event is critical for proper analyses. Most of the times, the imported clips display correct timing information for a given frame as I scroll over the clips. However, sometimes, some clips show a static or constant timestamp for all the frames in a clip and the timing information doesn't change in the playhead as I scroll over different frames.
    For such clips, I was wondering if it's possible to display correct timing information for the frames, and how? Since I only need frame timing info relative to the starting point, I am open to a solution that involves readjusting starting timestamp.
    Thank you so much for your time and help.

    Several ways to do this.
    I would scrub to the in point of the audio you want to change, then drag all the way back to the beginning of the clip. Then EDIT/SPLIT CLIP or right-click/Split Clip. Then go to the out point of the audio clip and drag to the right to the end of the clip. Then Edit/Split Clip. The clip in the middle should have your 25 minutes of audio.
    Another way: Use Comment Markers
    See this Tutorial from Ken Stone.
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#markers
    If neither of those work for you, tell me more about what you are trying to do.

  • How to add a rectangle color frame for the video clips ?

    Hi there,
    I have shrink the 3 video clips small enough to fit all 3 of them into 1 screen.
    And now I want tomake a border rectangle color frame for these 3 video clips.
    Any tips on how I shall start ?
    Thanks & regards
    Cheers

    Ian R. Brown wrote:
    I have a feeling it can't be done because the border will probably go round the original full size video.
    A workaround would be to use the Custom generator to make a rectangle which you resize and put above the background.
    Then put your video you want framed on top of the lot and resize it so that a bit of the coloured Custom generator is showing all the way round.
    It's gonna be fiddly but simple enough in theory!
    Thanks Ian, that was a good idea.
    But my cropped video clip is a video clip being color-keyed (ie my video clip has alpha channel & the background is transparent). So putting a colour image behind the clip does not work because it will be seen through the alpha channel.
    Any tips ?
    Thanks

  • How can I make the wireframe identical for various video clips?

    Hello,
    For the end credits on a small movie, I would like the video clips to be much smaller, and the background to be black. I know how to make the clips smaller on the screen, and this is done by adjusting the wireframe.
    I am trying to have the wireframe remain in its identical size and location across various clips but cannot figure how to do this other than change the wireframe independently for each single video clip, making it an approximate job.
    Is there a way to ensure that the properties of the wireframe (size, position) remain constant for a series of clips? I have tried to find some properties settings for the wireframe which I could replicate for all clips but this search has proved unsuccessful.
    Many thanks in advance for any help.

    Use the Paste Attributes command as detailed in this link:
    http://discussions.apple.com/thread.jspa?threadID=1987781&tstart=15
    Instead of checking the Filters box, check the Basic Motion box.

  • Need to recreate artwork for imported video clips

    Anyone know how to make iTunes regenerate artwork for video clips it has imported?
    About three weeks ago I upgraded from 7.1.something to 7.3.2. Huge mistake. Huge. I have about about 5,000 video clips in iTunes and when the update had finished the artwork for about 98% of them was gone and the remaining ones were "misplaced," i.e., the artwork has nothing to do with the clip it's attached to. For every one of these clips the artwork had been generated when the clip was imported, now there's no artwork or the artwork is wrong and iTunes won't let me do the "set artwork to poster frame" routine - as if I would consider doing that for 5,000 clips. It's almost as if iTunes considers the new, "blank artwork" to be real, unmodifiable artwork except that it doesn't take up space in Cover Flow.
    Not only that but the images displayed in Cover Flow are tiny - one-third the size of audio album cover art - and there doesn't seem to be any way to enlarge them.
    What a mess. And only in video - no related problem in the music section.

    I'd recommend you grab After Effects for your special effects and if you have a lot of editing, also Premiere. Although you can do it all in After Effects, Premiere is a lot easier to edit with. The combination is used very frequently. All your assets from your other applications are usable to various extents in both of these applications.

  • Batch processing audio for separate video clips?

    Hi there, new to the forums. I have roughly 100 separate video clips that either I have edited and exported out of PPro or collected from other outside sources. The video clips were recorded in a wide range of environments, producing widely varied audio levels and sound quality. The videos are for a blog.
    I am hoping to create a batch process preset in Premiere Pro or Audition to normalize the audio in all of the video clips. My goal is to have the audio play back at the same volume level in all of them without having to edit the audio individually in each clip. I have been searching the forums for a while for help with a batch process solution like this. Running CS6 so have full access to all Adobe apps.
    I have played around with running the clip audio through batch processing in Adobe Audition CS6. Haven't had any success thus far -- the audio doesn't save within the same video file it was pulled into Audition from. I really would like to normalize the audio without having to re-import/-re-export each separate video.
    PPro group might be the wrong place to start, but figured I would start here. Is there a missing manual out there for doing something that seems relatively simple?

    Premiere Pro can't do this.  If Audition can't either, then you're probably stuck doing it manually.  Or at least, using non-Adobe software.  Possibly VirtualDub, depending on your source media.

  • Lens-blur / Tilt-shift blur grayed out for a video clip as Smart Object

    So instead of using Actions and apply the said effects to hundreds, even thousands of still frames, I was aware you can apply filters directly onto a rendered video clip in Photoshop.
    I followed the instructions by opening the video which I created with "Open Image Sequence" in QuickTime, converted it into a Smart Object. But when I try to apply the said blur effects, they are all grayed out.
    What am I doing wrong? Is this something CS6 can't do but CC can?
    Please advise, thank you!

    I'm kind of restricted as to the height and position on the indoors shots. I have my eye on positions but it means climbing up on things and getting into corners but, if needs must.
    I was using alpha channels as the angles I've used so far don't lend themselves to making a straight mask. I'll stick with it though, it might look better on just the automated machine with no people.
    Maybe being forced into working with odd angles and positions might give the video something unique over the rest, probably not though. I guess there's only one way to find out.

  • Help with script to update shotDate for a video clip

    As hard as it is for me to believe, Adobe Premiere Pro doesn't take the date code when capturing video clips from a DV camera and put it into the "shotDate" video metadata field. Instead, it (stupidly in my view) sets the shotDate to the date when the video clip is being captured, not when it was shot. I want to write a script to correct this.
    So far I've been able to get access to the existing, bad shotDate property, but I can't seem to set it successfully. The relevant portion of my code is as follows. Can anyone point me in the right direction as to why my setting the property isn't working? Thanks in advance!
    var md = thumb.synchronousMetadata;
    md.namespace = "http://ns.adobe.com/xmp/1.0/DynamicMedia/";
    var BadShotDate = md.shotDate;
    $.writeln("Bad Shot Date: ", BadShotDate);
    // Get the XMP packet as a string and create the XMPMeta object
    var xmp = new XMPMeta(md.serialize());
    var d = new XMPDateTime(new Date()); // Dummy value for testing
    xmp.setProperty(XMPConst.NS_XMP, "shotDate", d, XMPConst.XMPDATE);
    var updatedPacket = xmp.serialize(XMPConst.SERIALIZE_OMIT_PACKET_WRAPPER | XMPConst.SERIALIZE_USE_COMPACT_FORMAT);
    thumb.metadata = new Metadata(updatedPacket);

    I figured it out, so I thought I would post a follow-up for anybody else running into the same issue. The following function will set the shot date metadata to whatever string is supplied for the given thumbnail:
    function SetShotDate(thumb, newshotdate)
    if(thumb.hasMetadata)
    // Get the metadata object - wait for valid values
    var md = thumb.synchronousMetadata;
    md.namespace = XMPConst.NS_DM;
    var xmp = new XMPMeta(md.serialize());
    xmp.setProperty(XMPConst.NS_DM, "shotDate", newshotdate);
    var updatedPacket = xmp.serialize(XMPConst.SERIALIZE_OMIT_PACKET_WRAPPER | XMPConst.SERIALIZE_USE_COMPACT_FORMAT);
    thumb.metadata = new Metadata(updatedPacket);

  • Looking for background videos

    Hello all
    I'm on the hunt for various background videos, I have found IStockPhoto and Getty Images, but I was wondering what other options I may have and, was hoping for a few recommendations, I'm not really looking for anything specific cause it really all depends on what project I'm working on at the time....
    Thanks

    Is joke, yes?
    Anyone know where I can find a red and white swirling, falling into the vortex,
    There are several presets and prebuilts within Motion and LiveType.
    kinda cartoony looking type
    You mean text? Can't imagine text doing what you're describing without many carefully applied filters. Since the text is customized by the user, no.
    background to key?
    You mean key in front of? Or you want to key out the background? Huge difference and we cannot possibly read your mind.
    bogiesan
    Message was edited by: David Bogie Chq-1

Maybe you are looking for