Looking for Server 2.0

How does one go about downloading Server 2.0 these days? It's not on the App Store at all (that I can tell).
Not ready for the jump to 3.0 (and Mavericks) but 2 would do me just fine; for now I'm sticking with ML on production hardware.
Anyone?
TIA,
Tony

Hot dang. Found answer https://discussions.apple.com/message/19202560#19202560
One phone call and done!

Similar Messages

Mac Pro App crashes while looking for server that no longer exists

PROBLEM:
Motion crashes every time I try to launch. Before it crashes, a window appears with the message: "Looking for "G4MDD"--which is my old G4 machine.
BACKGROUND:
I kept my old G4MDD networked to my MacPro Intel machine for a while during my hardware migration due to Motion app instabilities I was experiencing.
Finally, with Motion v2.1.2, I was able to run Motion on my MacPro reliably.
I disconnected G4MDD from the network, deploying it to another building, dedicated to other non-FCP purposes.
I have not been able to launch Motion 2 on the MacPro since. It goes out looking for G4MDD, then crashes every time.
REMEDIES I'VE TRIED:
Everything Apple suggests on the Motion troubleshooting page, including re-install of the app following all instructions meticulously.
QUESTIONS TO GROUP:
1) Is there some server-related preference file I can try trashing?
2) Any other suggestions?

The location should be /Users/your name/Pictures. You can change this by holding down the option or alt key (the ones immediately to the left or right of the cmd keys either side of the spacebar) whilst clicking on the iPhoto application icon in your dock and making an informed choice from the options you see.
By default iPhoto creates an iPhoto Library (the folder where all your data in iPhoto is stored) in the /Users/your name/Pictures folder. It seems that in the past you must have selected an externally or network attached volume named TOSHIBA as the location for the iPhoto Library instead using the instructions I've given you. All you have to do is revert it back to the location you now want.

Looking for server at startup

I have moved an iMac G5 from the office environment, where it was set to login to a local server at startup. Now, this is a standalone machine, not connected to a network. I have checked startup items, and there is no reference to the former server. In the Startup Disk preference panel, there is an icon called Network Startup with a question mark over it. Can anyone tell me how to get this machine to stop looking for the former server every time I start up?

Hi Duane,
This is what it says about this machine (thus, my thinking it was an Intel machine)
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version: 1.21f4
Does this change any advice you can offer?

Looking for server requirements for Captivate 5

My organization wants to install Captivate 5 on 2 desktops and publish the courseware to a server that's accesible from our intranet for students. Does anyone have any server specs for an organization of 2,000 employees that can support mandatory yearly JCAHO and OSHA requirements as well as ongoing training classes for nurses and patients? Thanks.

a better question would be is it possible to run an executable directly on an html page. i could put my chat program in a directory on geocities, and then run it from there.
any ideas?

ITunes looking for server.

I just recently set up a 3 drive RAID 5 in my G4. It took me a while to get the computer cleaned, a new start-up drive installed and formatted and the RAID completed. While I was working on the RAID I pointed iTunes to the drives in my B&WG3 to get its music. Now that the RAID is complete, whenever I dock my iPod nano or my iPhone, iTunes tries to find the B&WG3 (which had been working as a server). I also have this problem in the Finder, when clicking on my 'home' folder. How can I get iTunes and the Finder to forget the old server (my B&WG3) ???

1. Can run Iphoto and Itunes off of Time Capsule. And maybe view video content as well? Using my laptop as the Medium.
Since the Time Capsule is just a file server you can't run any applications directly on it. Of course you can use your laptop or any other compatible computer to access files (iTunes/iPhoto libraries, etc.) stored on the Time Capsule. Your computer would then have to have it's audio/video output connected to your TV.
1. Do you have to be on 10.5 Leopard.
A Mac running OS 10.4.8 or better can access the Time Capsule's file server. www.apple.com/timecapsule/specs.html

Apologies for Server Outage

Folks,
We experienced a 6 hour server outage today from 6pm to midnight Eastern US
time. I apologize for any inconvenience that you may have experienced. If
you sent us an email / made a support request / attempted a newsgroup
posting / etc. at that time, please resend it as we likely did not receive
it.
Thanks for your patience.
Neelan Choksi
SolarMetric Inc.
[email protected]
202-595-2064 x1331
http://www.solarmetric.com
Vote for Kodo JDO as Best Java Data Access Tool, Best Database Tool or
Driver, and Best Persistence Architecture,
at the Java Developers Journal 2003 Readers' Choice Awards. The ballot is
online at http://www.sys-con.com/java/readerschoice2003/vote.cfm.

As the server side application was created with empty folder;
(with no server side script file) It won't support FLV playback
based subscribers. Please look into the
samples/applications/vod/main.asc file and look for server side
script which you would have to add just to support FLV playback
component.

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

My server keeps telling me that I have an update for 10.10.1 and that I should look for it in the app store. I do that and am not finding anything that makes the update notification go away. I have installed an update the app store says I need.

I updated to Yosemite on my Mac mini/server. Then my server wouldn't work. I updated and bought the software needed when updating to Yosemite. The server seems to be working. Subsequently I've started getting a notification on the server icon that an update is needed. When i look for details I'm instructed to go to the app store. I've done that. In the updates category no update is found by the app store system. I then went to the purchases category and was informed I needed to install the server software I'd purchased. While I'd installed before, I did it again. I still have the 1 in a red circle covering part of the server icon. I have restarted the mac mini. I can't figure out what step I'm missing. The continued presence of the red circle suggests that the software still isn't installed. Looked into restarting the server in help but don't find clear instructions that make sense. Suggestions from someone who has a mac mini server and has worked with this topic would be greatly appreciated. General comments from anyone who has not looked at this kind of problem before might turn out to be unenlightening for this neophyte.

I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

How do I stop mavericks from looking for an old server and nagging me that it can't find it?

MacBook Air running OS X 10.9.4
Had it set up to connect to my main iMac for shared files. Wife complained that when my iMac wasn't on the MacBook constantly nagged her with a message saying it couldn't connect to the server (my iMac).
Removed sharing on my iMac. Removed recent server list from the MacBook Air. Removed my iMac from the finder side bar in the MacBook. Now the MacBook Air constantly naggs us that it can't find the server (name of my iMac). I just want the @#$@# thing to shut up, quit looking for the iMac and be quiet.
Need help as I can't figure this one out.
PLEASE!!

There are many possible causes for this issue, and it may be hard to resolve. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. A known offender is "AdobeResourceSynchronizer," which is a component of some Adobe products. See also this discussion.
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
          Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
          Clear Recent Servers…
and confirm. Test.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application.
Try rebuilding the iPhoto library.
Step 8
Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Step 9
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 10
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

Looking for a client/server that supports multiple protocol and delivery

Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I need

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

Looking for a simple photo gallery web server setup

Hi,
I have Arch running on my low powered AMD HP microserver and am looking at letting relatives,friends etc see my photos over the web.
I have php and sqlite3 already installed and dyndns setup.
What further would I need (I'm looking for as painless, light and small as possible setup)
Cheers
Smiffy

Yes - I've tried that and could try a few different setups until I find what I want.
I was more looking for any recommendations especially from someone who has set something like this up before.
This page was useful :-
http://www.yolinux.com/TUTORIALS/LinuxT … llery.html
BBGallery looks good and simple to me but needs GIMP (I have a headless server so don't really want to install extraneous sw)

Looking for a free or low cost EJB server

I'm looking to start my own web app to help teach myself EJB and am looking for a free or low-cost ejb app server that I can work on. I realize I get what I pay for so performace isn't an issue. Anyone have suggestions?

Go to
http://www.jguru.com/faq/view.jsp?EID=241193

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.

Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

When I try to log in to my BC account I get a message that says this"Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its nam

When I try to log in to my BC account I get a message that says this"Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Admin/Index2.aspx"
Any ideas???

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Looking for Server 2.0

Similar Messages

Maybe you are looking for