Looking for sha-1 hash values for the Windows 10 Enterprise x64 & x86 ISO's

When I downloaded the ISO's, I either missed the hash values or they weren't there. Still can't fine them. I'd sure like to validate the ISO's before trying to install.
Can anyone point me to their locations or post them here?
Mahalo

Maybe aboodi86 just ran a sha1 generator on the downloads.
For what it's worth, I got the exact same value listed above for my x64 download, so it's legit.  I didn't download the x86 version.
-Noel
Detailed how-to in my eBooks:  
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Similar Messages

  • Satellite U500 (PSU9ME) - I'm looking for the Windows 7 display driver

    I'm looking for the video card driver U500 PSU9ME. My operating system Windows 7 32Bit
    Please help me ..

    OFC my INF won't work because it is for nVidia g210m. You need to add Hardware ID of your display adapter, that can be found in Device manager, to the INF and try again, replace my PCI\VEN_10DE&DEV_0A74&SUBSYS_FF401179 with yours, other modifications + new drivers for 310m could be required.
    I still don't understand why you installed x86 version of windows when laptop came with x64 with all drivers on it, and all of them can be downloaded from toshiba site.
    Install Windows 7 x64 and you won't have these problems. Other option is Windows XP x86 if you NEED 32 bit OS, and I can't see why...

  • HT1620 Where do I look for the security key when I download an item.  Your website says your key is 0xD0261077

    Where do I look for the security key when I download an item.  Your website says your key is 0xD0261077?

    Your question is somewhat terse, and I might infer you're conflating the PGP key used for Apple security-related email communications with cryptographic hashes (message digests) used to verify the integrity and the origin of files, and with digitally-signed binaries.  While these areas are somewhat related, details vary.  (If you're already familiar with this stuff, my apologies.)
    The Apple PGP key is used to sign (verify) messages from the security folks at Apple, and can be to encrypt messages sent to the Apple security folks.  See this Apple Security PGP web page for details on using the PGP key for message verification and for message encryption.
    File downloads are implemented differently, and will generally involve a particular cryptographic hash or message digest (and not necessarily a PGP key), and what might be used used varies by the particular website and the download involved, with some sites using the older and insecure MD5, and with others increasingly using some variation of the less-insecure SHA cryptographic hash.  Depending on the scheme used, these can protect against corruptions, or can also be used to sign the binaries.  The system that Apple is encouraging developers to use is called Developer ID.
    Shell commands used and useful here include md5 and various openssl commands for the sha hashes/digests.
    If you have a particular public web site or file download, post a pointer and I'll have a look.

  • Looking for the oracle equivalent of T-SQL 'SELECT TOP n'

    Hi,
    I'm looking for the Oracle equivalent of T-SQL 'SELECT TOP n'
    and can't find any. There is SAMPLE(n) function but it supposed
    to pick up random values and I'm not sure if it's possible to
    make it select top values. Please help 8-)
    Thanx

    Hi Marina.
    Oracle does not have a functionality like SQL Server for TOP
    selection. The ROWNUM option should be used with great care and
    you may get unreliable results.
    Try looking at Metalink
    Doc ID: 291065.999
    Doc ID: 267329.999
    - They discuss this issue, and solutions.

  • Looking for the right List...

    Hi there!
    I want to use a List class to hold a potentially large number of elements. I don't care about randomly accessing elements; only Iterators will be used to iterate through the List. What I mostly care about is storage overhead and garbage collection.
    ArrayList and Vector have the problem of re-allocating memory and copying their internal array as you add elements - in case you don't know the exact number beforehand, which is my case.
    On the other hand, LinkedList creates a new object for each element you put in the List. All these objects will have to be garbage collected at some time, and this takes resources. In my case, I could have 10s or 100s of objects, each creating its own List with 10s or 100s of objects.
    So, essentially, I'm looking for the best trade-off. Anybody done some stress-testing?
    Thanks a lot!
    Vagelis

    Well... it depends.
    If you know up front how many entries there are going to be in each list and the lists are fairly stable then you'd be best off going with an ArrayList. If there's a lot of addition and removal of items in the list and you have no clue how many objects there are going to be in each list, then you might be better with a LinkedList. It may also depend on how you remove entries from the list (by index or by object value) or whether you just throw a whole list away and start again.
    Personally I've used ArrayLists of ArrayLists containing 10s or 10000s of objects and "been okay", by which I mean this has never been the performance bottleneck in my system.
    In extremis (particularly if performance is really critical and you know quite a lot about how your objects are to be organised) it might be more sensible to roll your own implementation (for example, if an object appears only in one list at a time then it could be made "Listable" and hold its own forward and backward references to aid in its insertion in a linked list).
    If you can give some more information on the exact required behaviour then people can help more.
    In the meantime my recommendation is to use an ArrayList and if performance becomes a problem, profile the execution later and consider switching.

  • Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.

    Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.
    The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
    Dave

    Hi
    I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
    http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html 
    He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
    le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
    I have asked him to post a bug report about Adobe Illustrator CC 2014.1
    Dave

  • I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

    I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

    Open AirPort Utility. The first screen looks something like this:
    Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
    If you do not see these screens, you will need to start over and configure your AirPort again.

  • Problem with my program looking for the settings file in the wrong folder

    I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
    So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
    It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
    Edited by: ColNewman on Feb 5, 2008 6:55 PM

    So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
    One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
    Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to look for the Table Name

    Hi Friends,
    Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
    Thanks for the assistance.
    Regards

    Hi Friend,
    If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
    Abap Dictionary > Fields > Table Fields.
    Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
    Regards,
    Jigar

  • Where to look for the computed stats collected using gather_table_stats

    I have used analyze command before but new to gather_table_stats.
    I have executed gather_table_stats procedure as given below. Now where to look for the statistics estimated and also what are the important parameters I need to look in the stats ? Any major difference between analyze & gather_table_stats ?
    SQL> exec dbms_stats.gather_table_stats(ownname => 'TPDBS01A', tabname => 'x_TPD_STG_TL_SF_LEGAL_OWN
    ER' , estimate_percent => 50, method_opt => 'for all indexed columns size auto');
    PL/SQL procedure successfully completed.

    The command "analyze table" is deprecated for gathering optimizer statistics. But it is still the only command to get for instance the chained rows. This command is no longer maintained for new features, so if you use this command to collect statistics, it might not collect all needed numbers for the optimizer so the plan could be wrong.
    The package dbms_stats is collecting all the figures that the optimizer needs to genererate an optimal access plan. All new database features are incorporated only here.
    The statistics numbers can be found in the normal tables like USER|ALL|DBA_TABLES, ...TAB_COLUMNS, ...INDEXES, ...IND_COLUMNS etc. There you can find for instance number of rows in table, clustering factor for indexes and more numbers like this. They are not really needed for us human beings, they are used by the optimizer to generate the access plan.

  • HT1349 hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

    hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

    Hi.
    I had a similar problem myself. This is what helped me.
    I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID.  Then went back to app updates. Once I put in my ID password all was fine.

  • When my husband and I try to share our libraries and import from each others libraries, we get as far as seeing the library on the screen. The next step is to look for the 'Show' menu at the bottom of the screen, but neither of us has any such thing. ?

    When my husband and I try to import from each other's libraries, using Home Sharing, we are intructed to look for the "Show" menu at the bottom of the screen. Neither of us has anything like this on our screens. How and where do we locate it? We both have the latest itunes running.

    Hey fantail163,
    If you are not seeing the button to show menu, try out the troubleshooting steps for Home Sharing.
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • On my iPod touch it says on the settings I have wifi but when I look for the 3 bars there is no wifi please help

    On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. already suggested
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS4062 I've done all of these recommended steps.  My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync.  Any other suggestions?

    I've done all of these recommended steps.  My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync.  My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3.  Any suggestions?

    All I had to do was complain.  I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store.  I have no idea why.

Maybe you are looking for