Looking for Simple report

Hi All
Hope u are doing well
I was looking a simple report which gives me celar picture of the stages
Sales oder no, Invoice numberNo, if on production production ordernumber due date of production order and po invoived to get the production done and trceiving date of POs for the same
Kindly revert with the best possible option
Have a nice day
Kind regards,

Dear Mona,
The requirement you have putted on your report is very much complex.As per your scenario this one is only possible when you guys are following the base document otherwise this report is not possible
Regards,
Kumar

Similar Messages

Alternatives to Discoverer for simple reporting

Hi,
I was wondering if there are any simple, low cost ( Oracle or 3rd party ) alternatives to Discoverer as a means for simple reporting against Oracle Databases
Oracle seem to be going the ( more costly ) BI Standard Edition One route as their replacement to what was good old simple Discoverer.
The beauty of Discoverer was that it was intended to be simple intuitive Reporting Tool for end users with little technical / sql knowledge.
I am just wondering what alternatives now sit in that space ?
thanks,
Jim

Please have a look to BIRT Home

Looking for a report in LCM(Landed Cost Management)

Dear All,
We are looking for a report in LCM module to print all the unmatched/ partially matched receipt numbers with outstanding balance in accural account.
Does any one have idea on this? or worked on similar reports before?.
Detailed requirement:
There are PO order receipts for which certain costs are estimated viz. Customs Duty, Clearance Chgs. Etc.
Once the receipt is made, the inventory is valued based on the estimates. Subsequently when the actual invoice for the costs i.e. Customs Duty, Clearance Chg. are booked, there could be a variance. This difference in the estimated and actuals gets transferred to inventory provided stock exists.
However if stocks does not exist then the revaluation does not happen. In such cases we need to monitor such balances.

Hi Melvin,
You can use the User Data Dump tool. Check out the following post: https://supportforums.cisco.com/message/3403809#3403809
HTH,
Chris

Looking for a report as below

Greeting,
newbie in VMWare Chargeback, try coouple times, still can not get what I am looking for I am looking for a report for vCloud Director that just include the following information:
1. Information for ASSIGNED number of vCPUs to VM.
2. Information for ASSIGNED Memory to VM.
3. Information for hours for vm ON vs OFF hours
4. Information for ASSIGNED Storage to VM
5. Information for USED storage to VM.
What I got is 3 of this 5 items are 0
Anyone please give me some hints or direction how to to do that
Thanks
newbie

Dear All,
Good Day,
I have two tables Table_1 and Table_2 in MS Accesss with following structure
Table_1
Attendance_Date     Name      Time_In
12-Dec-2014            Smith        7:30
12-Dec-2014            Mark          8:00
12-Dec-2014            Rani          7:45
13-Dec-2014            Smith        8:30
13-Dec-2014            Mark          7:00
Table_2
Attendance_Date     Name      Time_OUT
12-Dec-2014            Smith        5:30
12-Dec-2014            Mark          5:00
13-Dec-2014            Smith        7:30
I am looking for a report as shown below
Attendance_Date     Name      Time_In      Time_Out
12-Dec-2014            Smith        7:30         5:30
12-Dec-2014            Mark          8:00        5:00
12-Dec-2014            Rani          7:45           -
13-Dec-2014            Smith        8:30         7:30
13-Dec-2014            Mark          7:00         -
13-Dec-2014            Rani          -                -
Anyone's help, really appreciate
Regards
Abdussalam

Looking for a report to get all managed system components

Hi,
We are looking for a report to get the support pack level of managed system.
We can get that by going individually on each system entry in SMSY. Is there a standard report or a transaction in solution managed that can list the support pack level of all managed systems ?
Thansk you for your help.
Chak

Hi,
Another option you have -- provided that you are running EarlyWatch Reports on all of your systems -- would be to create a single Service Level Report.
You would create a variant that includes all of your systems under the Select for Reporting column. Then under the Content from Solution Manager tab select the System Configuration --> Select for Reporting box.
This System Configuration report will provide you will the hardware info (OS version, CPU, memory), database version, SAP software components/version, and the SAP kernel.
The SLR allows you to extract and aggregate segments of your EWAs into a single report.
Good luck.
Bill

I am looking for following report

Dear Expert ,
I am looking for following report , please let me know the T codes for follo reports :
a) Assembly Log book Entry
b) Assembly Log book approval
c) Machine log book entry
d) Machine Log book approval
e) Monthly attendance
f) Monthly progress
g) Monthly opening balance Entry
h) Recalculation of Index
Reports
b) Daily log book Report
c) Incentive Details
d) Incentive Summary
Points will be rewarded .
Neal
Edited by: Neal Gibson on Oct 23, 2008 11:53 AM

Thanks for your reply . I know SAP1 and SAP2 but I am not HR guy . I just wanted to know th T codes from where I can get those reports .

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Looking for Crystal Reports for . net framework 2.0 (x86) in MSI Format..

Wasn't sure which version you are using, so here are the two i think you might be using:
[CR for VS2005|https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip]
[CR for VS2008|https://smpdl.sap-ag.de/~sapidp/012002523100006255282008E/CRRedist2008_x86.zip]

I am looking for Crystal reports arleady designed.

I am looking for Crystal reports already designed. Does anyone know where I could fine them?

Navin,
Thanks for the reply, I have another question you might be able to answer.
I have a picture field (blob field) on the same line as our Product ID field (regular data field) and i want the report to show the picture that goes with that Product ID. 50% of our products dont have pictures, so when I print the report, it currently prints large empty spaces for the Products that dont have pictures and makes the report quite long and unattractive.
I have tried to supress the field and also put the field in its own section and use a formula for supressing if the data is blank, but I get the error message that says "Can not use a BLOB field in a formula".
I need to find a way around this. Can you, or any of your experts help?
I could send you the report with some data in it if that would help.
Thanks again!
JM

Looking for 2 reports

I am looking for 2 reports:
1. A report to tie the AA subledger to the General Ledger. In our company, we have several scenarios in which we post retirements/acquisitions with value dates in the past months and post it in the current period (which is open). This causes the balance on the subledger to change as of that value date, which is fine. However I cannot find a standard report to tie the balance to the sub-ledger. The report date on the standard report seems to pick up transactions in the subledger even if they have a future posting date. e.g. Report date 3/31 would pick up transactions that were posted with a value date of 3/15 but a posting date of 8/31. I need a report where I can pull balances by the Posting Date. The auditors need this to ensure that the sub-ledger and G/L are in sync. I am sure this is not an exceptional requirement. Can any one tell me how they handle this?
2. I need a depreciation comparison report where I can compare depreciations of each period in a year side by side. Something that would have all the 12 periods and the total depreciation for say an asset class.
Thanks

Thanks for the response once again. I already know about ABST2 but the auditors want detailed reports. ABST2 just gives you the differences. Now as for the Asset Balances and the FS10N, thats where the whole issue starts. The auditors come in every 4 months and they look at the sub-ledger and G/L for those months to try and tie it out. Here the reason why we have an issue.
Example: Say the FA balance was 1000000 as of 3/31 and it tied to the G/L as of 3/31. On 9/15 I post an entry to acquire an asset for 30000 with a value date of 3/20. The result is that if you run the asset balances report as of 3/31, it would show a balance of 1030000 and also an increase in the planned accum. However if you run the FS10N and look at the cumulative balance at the end of March, it would be still 1000000 since the 30000 was posted to the G/L in september and not march. When the auditors look at these 2 reports, they think that sub-ledger and G/L does not reconcile. I tried to explain the reason and they understood. However, they need a report to see it.

Looking for SIMPLE time tracking app

Hi all
I'm looking for a really simple 'retrospective' time sheet app - wondering if anyone knows one?
I've seen literally hundreds, but they all want you to 'click to start the clock' and then click to end it. This doesn't work for me, as I spend only about 25% of my time in front of the computer.
What I'm looking for is something that I can put all my client contacts in, then separately link projects to those clients. Then at the end of each day I can quickly recall what I did during the day and assign time to each project.
Most apps want you to assign time to each project as you go through the day, so its relatively painless to switch projects. However when you do it all at the end of the day, you don't want to keep entering the date, you just want to enter the start/end time, and what project it was. More like a journal entry I guess.
Then at the end of the month it would print a report that groups the hours worked on each project so that you can review them and create an invoice (or in my case send to my accounts clerk who makes the invoice for me).
Any ideas from anyone would be greatly appreciated.
Thanks!

Hi shannonbray, welcome to the AppleWorks forum, which is intended for discussions of Apple's now-legacied productivity suite called AppleWorks.
One could develop such a template using the spreadsheet or database modules of AW separately or in combo,but it doesn't sound as if that's your aim. I'm sure clever types have done such things, and perhaps shared them to the AWUserGroups and such, and I hope they note your post and reply. There are certainly numerous clever folks who follow this forum, and they may have pointers to other apps for you, but essentially I think you've posed the wrong question in the wrong place.

Looking for simple timeline/calendar screenlet/widget.

Good day gentlemen,
I'm looking for a simple screenlet or widget for linux that is a calendar, but designed to be more of a timeline of past events than a reminder of future events. For my specific purpose in this case I'm trying to lose weight. So I'm seeking an application to record my previous weight and other notes about what i ate, and how much and what kind of nutrients i had that day. I would like to keep it in a calendar or timeline like format. Something easy to the point where if my buddy asked me how much i weighed last week or what i did last week, i can simply click on the date and all my notes appear about my weight, and what i ate, etc. Also simple to input data like clicking on the date and entering a note about that day. Something easy to use and sort of integrated into the desktop such as a screenlet or widget, so I don't have to open up a separate window to view these records. I did a little research and was able to find a few things, Rainlendar being one of them. But I feel most of what i found are way more complicated for my purpose. Would any of you happen to have any suggestions on what application would most suit my purpose in its most simplistic form? thanks in advance for your kind and prompt response
Sincerely,
Sicariuxs

There are, apparently, quite a variety of tools just for this purpose. here's one. That was just the first one up from a search, I don't actually know anything about it. But overall, I'd suggest you actually narrow your search as there are tools targetted specifically for such goals.

Looking for Simple JSTL Example

Hi Everyone,
I'm looking for an example of a simple Web application that uses "JavaServer Pages Standard Tag Library" (JSTL) -- that doesn't use JDeveloper!
I have OC4J stand-alone 10.1.3.0.0 on Microsoft Windows XP Professional Version 2002 Service Pack2 with JDK 1.5.0_07
I created and packaged a J2EE application in a EAR file. The EAR file contents:
META-INF/application.xml
frstjstl.warContents of "application.xml"
<?xml version="1.0"?>
<application
       xmlns="http://java.sun.com/xml/ns/j2ee"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee/application_1_4.xsd"
       version="1.4">
<module>
    <web>
      <web-uri>frstjstl.war</web-uri>
      <context-root>frstjstl</context-root>
    </web>
</module>
</application>Contents of "frstjstl.war"
META-INF/MANIFEST.MF
index.jsp
WEB-INF/lib/standard.jar
WEB-INF/web.xmlContents of "web.xml"
<?xml version="1.0"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
         version="2.4">
<welcome-file-list>
    <welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<jsp-config>
    <taglib>
      <taglib-uri>http://java.sun.com/jsp/jstl/core</taglib-uri>
      <taglib-location>/WEB-INF/lib/standard.jar</taglib-location>
    </taglib>
</jsp-config>
</web-app>Contents of "index.jsp"
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<html>
<head>
    <title>Simplest JSTL</title>
</head>
<body>
    <h1>Simplest JSTL</h1>
    <c:forEach var="httpRequestHeaders" items="${headerValues}">
      ${httpRequestHeaders.key} = ${httpRequestHeaders.value}
    </c:forEach>
</body>
</html>My JSTL implementation comes from here:
http://jakarta.apache.org/taglibs/doc/standard-doc/intro.html
The distribution contains a "standard.jar" file and a "jstl.jar" file (among other things). The "standard.jar" file is included in my WAR (see above) and I have copied the "jstl.jar" file to:
%J2EE_HOME%\jsp\lib\taglibI launch OC4J from the command prompt like this:
java -jar oc4j.jarI deploy my EAR using the following command:
java -jar admin.jar ormi://localhost oc4jadmin xxx -deploy -file frstjstl.ear -deploymentName FirstJSTL -bindWebApp default-web-siteThen I launch my Web browser and enter the following URL:
http://localhost/frstjstlAnd I get the following error message:
500 Internal Server Error
OracleJSP: oracle.jsp.parse.JspParseException: /index.jsp: Line # 8, <c:forEach var="httpRequestHeaders" items="${headerValues}">
Error: Attribute: items is not a valid attribute nameThanks (for reading),
Avi.

Thanks Qiang.
Yes, when I copy file "index.jsp" to directory "%J2EE_HOME%\default-web-app\testJstl.jsp" it works.
I use the following URL:
http://localhost:8888/testJstl.jspAnd this is the output I get:
[Format modified to be more suitable to post on this forum.]
Simplest JSTL
CONNECTION = [Ljava.lang.String;@7348e
USER-AGENT = [Ljava.lang.String;@10b8d03
ACCEPT-LANGUAGE = [Ljava.lang.String;@157011e
ACCEPT-ENCODING = [Ljava.lang.String;@10a8143
ACCEPT = [Ljava.lang.String;@ac8360 HOST = [Ljava.lang.String;@1e534cb
[/pre]
But I guess, since the JSTL related JAR files are part of the default Web application, there is no reason it shouldn't work.
That's why you said:
Let us do a sanity test first.So now what?
(And, by the way, thanks for your help.)
Cheers,
Avi.
Message was edited by:
        Avi Abrami

Looking for Simple Password App

I'm looking for a simple, secure, free app to store my passwords in. I did a google search and there are hundreds out there. I'd like to use one that someone here has had experience with. I don't want anything sophisticated or something that syncs. Just something to store my passwords on my iphone.
Thanks, Dick

Put the Library on an encrypted disk image. Unless Mom is a serious computer head she'll not know what you've been up to.
Regards
TD

How to get tables to create outbound proxy for simple report

hi all,
i have a simple report where iam displaying 5 fields from mard and makt.for thios report i want to create outbound proxy.
i have created the proxy
but my question is which tables i have to use to write code in se38 for outbound .i have seen one example but it is not clear from where he got that tables.
helpme.
tahnk u.

<Link to blocked site removed by moderator>
Edited by: Vinod Kumar on Sep 26, 2011 3:31 PM

I am looking for few reports

I am looking for Transaction Codes or Path to get these reports
1 List of customer returns
2 List of goods receipts
3 List of Post Goods Issues
4 List of goods shipped
5 List of adjustment made to inventory by date/person. (Document it)
6 Inventory aging report
Thank you very much for help in advance

Hi Ashish,
MC+A                SIS: Customer Returns, Selection
VL01N               Customer Returns
VL02N               Customer Returns
VL03N               Customer Returns
MCP6                Goods Receipts
MB1A                Goods issue
MIGO_GI             Goods Issue (MIGO)
COWBHUWA            Goods Issue for Work Order
MB90                Goods Issue Messages
VLLA                Picking/Goods Issue
VL06G               Goods Issue - Delivery
COGI                Goods Issues
VLLA                RWE: Picking/Goods Issue Analysis
VL06G               Deliveries for Goods Issue
VL23                Goods Issue (Background)
Small Suggestion, use the tcode search_sap_menu to look for any tcode or report!
Hope it helps,
Thanks
Janani
award points if helpful

Looking for Simple report

Similar Messages

Maybe you are looking for