Looking for "Simple Trace" Settings

This might sound a bit odd, but the "Simple Trace" settings in CS5 were perfect for tracing my artwork for a graphic novel I'm working on. I upgraded to CS6 earlier this year but due to other issues had to take a break working on the graphic novel.
I came back today and drew the source images as I had before (in Paint Tool SAI using only black pen brush for a clean line) and then exported this to a PNG file which I then imported into Illustrator. I assumed that Default in CS6 was the same as Simple Trace in CS5, but it gives far fewer details than Simple Trace does! Is there anyway I get get the Simple Trace settings back?

Honestly, I tried to do just that last year but found it a frustrating influence. Even after I turned off some of the defaults (like redrawing lines) it was still more awkward than not. I found drawing in SAI a lot easier, it gave me a shaped line and best of all, it felt fun. Drawing in Illustrator for me hasn't been that so far.
However, importing what I drew in SAI and tracing it worked well before. Once it was traced I could place exactly what colours I wanted where, and exporting this to PDF files is a breeze.
I decided to use the strong points of each application. A good third of the graphic novel's been drawn that way, and if I swapped over now it would be awkward. However, once it's done I might try drawing in Illustrator again.

Similar Messages

Looking for simple timeline/calendar screenlet/widget.

Good day gentlemen,
I'm looking for a simple screenlet or widget for linux that is a calendar, but designed to be more of a timeline of past events than a reminder of future events. For my specific purpose in this case I'm trying to lose weight. So I'm seeking an application to record my previous weight and other notes about what i ate, and how much and what kind of nutrients i had that day. I would like to keep it in a calendar or timeline like format. Something easy to the point where if my buddy asked me how much i weighed last week or what i did last week, i can simply click on the date and all my notes appear about my weight, and what i ate, etc. Also simple to input data like clicking on the date and entering a note about that day. Something easy to use and sort of integrated into the desktop such as a screenlet or widget, so I don't have to open up a separate window to view these records. I did a little research and was able to find a few things, Rainlendar being one of them. But I feel most of what i found are way more complicated for my purpose. Would any of you happen to have any suggestions on what application would most suit my purpose in its most simplistic form? thanks in advance for your kind and prompt response
Sincerely,
Sicariuxs

There are, apparently, quite a variety of tools just for this purpose. here's one. That was just the first one up from a search, I don't actually know anything about it. But overall, I'd suggest you actually narrow your search as there are tools targetted specifically for such goals.

Looking for Simple JSTL Example

Hi Everyone,
I'm looking for an example of a simple Web application that uses "JavaServer Pages Standard Tag Library" (JSTL) -- that doesn't use JDeveloper!
I have OC4J stand-alone 10.1.3.0.0 on Microsoft Windows XP Professional Version 2002 Service Pack2 with JDK 1.5.0_07
I created and packaged a J2EE application in a EAR file. The EAR file contents:
META-INF/application.xml
frstjstl.warContents of "application.xml"
<?xml version="1.0"?>
<application
       xmlns="http://java.sun.com/xml/ns/j2ee"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee/application_1_4.xsd"
       version="1.4">
<module>
    <web>
      <web-uri>frstjstl.war</web-uri>
      <context-root>frstjstl</context-root>
    </web>
</module>
</application>Contents of "frstjstl.war"
META-INF/MANIFEST.MF
index.jsp
WEB-INF/lib/standard.jar
WEB-INF/web.xmlContents of "web.xml"
<?xml version="1.0"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
         version="2.4">
<welcome-file-list>
    <welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<jsp-config>
    <taglib>
      <taglib-uri>http://java.sun.com/jsp/jstl/core</taglib-uri>
      <taglib-location>/WEB-INF/lib/standard.jar</taglib-location>
    </taglib>
</jsp-config>
</web-app>Contents of "index.jsp"
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<html>
<head>
    <title>Simplest JSTL</title>
</head>
<body>
    <h1>Simplest JSTL</h1>
    <c:forEach var="httpRequestHeaders" items="${headerValues}">
      ${httpRequestHeaders.key} = ${httpRequestHeaders.value}
    </c:forEach>
</body>
</html>My JSTL implementation comes from here:
http://jakarta.apache.org/taglibs/doc/standard-doc/intro.html
The distribution contains a "standard.jar" file and a "jstl.jar" file (among other things). The "standard.jar" file is included in my WAR (see above) and I have copied the "jstl.jar" file to:
%J2EE_HOME%\jsp\lib\taglibI launch OC4J from the command prompt like this:
java -jar oc4j.jarI deploy my EAR using the following command:
java -jar admin.jar ormi://localhost oc4jadmin xxx -deploy -file frstjstl.ear -deploymentName FirstJSTL -bindWebApp default-web-siteThen I launch my Web browser and enter the following URL:
http://localhost/frstjstlAnd I get the following error message:
500 Internal Server Error
OracleJSP: oracle.jsp.parse.JspParseException: /index.jsp: Line # 8, <c:forEach var="httpRequestHeaders" items="${headerValues}">
Error: Attribute: items is not a valid attribute nameThanks (for reading),
Avi.

Thanks Qiang.
Yes, when I copy file "index.jsp" to directory "%J2EE_HOME%\default-web-app\testJstl.jsp" it works.
I use the following URL:
http://localhost:8888/testJstl.jspAnd this is the output I get:
[Format modified to be more suitable to post on this forum.]
Simplest JSTL
CONNECTION = [Ljava.lang.String;@7348e
USER-AGENT = [Ljava.lang.String;@10b8d03
ACCEPT-LANGUAGE = [Ljava.lang.String;@157011e
ACCEPT-ENCODING = [Ljava.lang.String;@10a8143
ACCEPT = [Ljava.lang.String;@ac8360 HOST = [Ljava.lang.String;@1e534cb
[/pre]
But I guess, since the JSTL related JAR files are part of the default Web application, there is no reason it shouldn't work.
That's why you said:
Let us do a sanity test first.So now what?
(And, by the way, thanks for your help.)
Cheers,
Avi.
Message was edited by:
        Avi Abrami

Looking for SIMPLE time tracking app

Hi all
I'm looking for a really simple 'retrospective' time sheet app - wondering if anyone knows one?
I've seen literally hundreds, but they all want you to 'click to start the clock' and then click to end it. This doesn't work for me, as I spend only about 25% of my time in front of the computer.
What I'm looking for is something that I can put all my client contacts in, then separately link projects to those clients. Then at the end of each day I can quickly recall what I did during the day and assign time to each project.
Most apps want you to assign time to each project as you go through the day, so its relatively painless to switch projects. However when you do it all at the end of the day, you don't want to keep entering the date, you just want to enter the start/end time, and what project it was. More like a journal entry I guess.
Then at the end of the month it would print a report that groups the hours worked on each project so that you can review them and create an invoice (or in my case send to my accounts clerk who makes the invoice for me).
Any ideas from anyone would be greatly appreciated.
Thanks!

Hi shannonbray, welcome to the AppleWorks forum, which is intended for discussions of Apple's now-legacied productivity suite called AppleWorks.
One could develop such a template using the spreadsheet or database modules of AW separately or in combo,but it doesn't sound as if that's your aim. I'm sure clever types have done such things, and perhaps shared them to the AWUserGroups and such, and I hope they note your post and reply. There are certainly numerous clever folks who follow this forum, and they may have pointers to other apps for you, but essentially I think you've posed the wrong question in the wrong place.

Looking for Simple Password App

I'm looking for a simple, secure, free app to store my passwords in. I did a google search and there are hundreds out there. I'd like to use one that someone here has had experience with. I don't want anything sophisticated or something that syncs. Just something to store my passwords on my iphone.
Thanks, Dick

Put the Library on an encrypted disk image. Unless Mom is a serious computer head she'll not know what you've been up to.
Regards
TD

Looking For Optimal Wireless Settings For Multiple WRT310N's

Folks, I have 3 Linksys WRT310N routers (all at the most current level firmware) around my house serving as both wired and wireless access points. I have Verizon DSL service (3 MB) as my ISP. We have a couple of IBM T60p laptops (w/Win XP Pro), a Lenovo S12 netbook (w/Win 7), and my son also has an Apple iPod Touch all that access our home network via the wireless network provided by the WRT310N's. The WRT310N's all have unique static IP addresses (DHCP disabled - IP addresses being issued by the Verizon DSL modem/router). My current wireless settings are as follows:
Wireless / Basic Wireless Setings:
Wireless Configuration = Manual
Network Mode = Mixed
Network Name (SSID) = (something other than linksys!)
Radio Band = Auto
Wide Channel = Auto
Standard Channel = Auto
SSID Broadcast = Enabled (Need enabled or the Apple iPod Touch will not find the wireless network)
Wireless / Wireless Security:
Security Mode = WPA2 Personal
Encryption = TKIP or AES
Passphrase = (Something really clever here!)
Key Renewal = 3600 seconds
Wireless / Wireless MAC Filter:
Enabled (With all the appropriate MAC addresses permitted)
Wireless / Advanced Wireless Settings:
AP Isolation = Enabled
Frame Burst = Enabled
Authentication Type = Auto (greyed out - can NOT change)
Basic Rate = Default
Transmission Rate = Auto (greyed out - can NOT change)
N Transmission Rate = Auto
CTS Protection Mode = Auto
Beacon Interval = 100
DTIM Interval = 1
Fragmentation Threshold = 2346
RTS Threshold = 2347
My goal is obviously to provide the best performance on all the wireless devices that we have. Since the laptops and netbook have a variety of OS's (and sometimes our neighbor comes over with his Mac laptop) I'd like to keep it flexable for those PC's and the Apple iPod Touch. I've also read that if you have multiple wireless access points you should set them all to different channels. If so, which channels? Or, should they all be on the same channel so one could walk from room to room without losing their wireless connection? Since I have 3 WRT310N's I'm interested in what recommendations there are for performance to keep the laptops and netbook communicating using wireless "N" yet keeping compatible for the Apple iPod Touch on wireless "G". Thank you all in advance for any advice or info.

Hmmmm, for quite some time I've left the SSID the same on all the WRT310N routers. At one time a while back I was told to do this by a Linksys technician. They all are cascaded (LAN-to-LAN via the ethernet ports) off of the 4 ethernet ports on the Verizon DSL modem/router in the similar manner described in the following article:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=96&s...
(Switch) ethernet port 1 on each WRT310N is connected to ports 1 through 3 on the Verizon DSL modem/router. Hence, each WRT310N is acting as an access point (wired and wireless) throughout the house. I do NOT use the 'Internet' port on any of my WRT310N routers. They each have a static (fixed) IP address like 192.16.1.10, 192.168.1.11 and 192.168.1.12. They all reside on the same LAN subnet as my Verizon DSL modem/router which is responsible for issuing DHCP IP addresses for the entire home network. The remaining (switched) ethernet ports 2, 3, and 4 on each WRT310N is left open for local hard-wired devices like printers and multimedia devices (like XBox 360, etc.). So bottom line is that each WRT310N is acting like a 4-port network switch that also has wireless capabilities (like a WAP).
By keeping the SSID the same on all the WRT310N routers I can keep a single wireless profile on each device (i.e... PC's) for my entire house. So I can go and access WRT310N #1 (with let's say with SSID 'ABC') in my living room and later go into my home office room and access WRT310N #2 (with the same SSID - 'ABC') with the same wireless profile. I believe it is the same concept used when someone stays at a hotel and accesses their public wireless network. That way the hotel customers only have to set their SSID to let's say 'HILTON' regardless of which floor or room they are in.
So the part that I'm really focusing on is the wireless performance aspect. My laptops like to operate on 'N' and get pretty good connection speeds (usually receive around 270 Mbps). The Apple iPod Touch (2nd generation) only goes up to 'G' so I believe I need to keep a 'Mixed' Network Mode. The part I'm not so sure about is the Channel Width and whether or not all 3 Linksys routers should be on the same channel (or set to Auto) or if I should manually set the channels and provide some separation between their channels. That's where 'Channel Width' and 'Channel' settings get a bit over my head. Now when I previously had multiple 'G' Linksys routers I contacted Linksys Technical Support and they said to use the same SSID and that I should separate the channels, but that was with their earlier 'G' versions. Now that I have a more recent [N] version and the channel settings can be 'Auto' I'm wondering if the correct settings would still be to again separate the channels or maybe leave it up to the routers to function in 'Auto' mode.
And if I need to set each router up individually what recommended settings should they be? As follows:
WRT310N #1:
Network Mode = Mixed
Channel Width = ?
Channel = ?
WRT310N #2:
Network Mode = Mixed
Channel Width = ?
Channel = ?
WRT310N #3:
Network Mode = Mixed
Channel Width = ?
Channel = ?
Here is a Cisco web page that I'm using as a reference:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=21194
I'm also looking for any suggestions on tuning the Advanced Wireless Settings like Beacon Interval, Fragmentation Threshold, RTS Threshold, etc. Again, my wireless user devices are both G and N and have various OS's.
Thank you again in advance for all your help!!

Looking for Simple Archiving Catalog Software

I have previously used AutoCat. Simply drag and drop a folder and AutoCat copies
the folder hierarchy and makes aliases of all the files. I keep this a catalog to
be able to simply find all of my files by a search through the finder. It tells
me the archive number of the disk where I can find a particular project. Very
simple, very legant. Not supported in Lion so I'm looking for a replacement.

Touvaly serves the same function as AutoCat. But it goes too far. It makes a "vrtual copy" of a removable disk. It is so hard to tell if you've pulled up real files and folders or the fake ones! - Somebody PLEASE bring back AutoCat!

Looking for Simple report

Hi All
Hope u are doing well
I was looking a simple report which gives me celar picture of the stages
Sales oder no, Invoice numberNo, if on production production ordernumber due date of production order and po invoived to get the production done and trceiving date of POs for the same
Kindly revert with the best possible option
Have a nice day
Kind regards,

Dear Mona,
The requirement you have putted on your report is very much complex.As per your scenario this one is only possible when you guys are following the base document otherwise this report is not possible
Regards,
Kumar

Looking for simple waveform filter

I am using E series board using single ended input to collect 16 channels of constant value data, (ie 10volts). The data has a small amount of noise and outlying data points which I need to remove. I am attempting to implement a simple low pass filter. I attempted the Buterworth and FIR filters. The code I have attempted based upon the help examples unbundles the waveforms, filters the data, and rebundles the waveforms. This produces a discontinuous waveform when ploted. Addtionally the filtered data looks like a sine wave with an amplitude ranging between zero and the bias of the constant input data dependent upon the input parameters fo the filter. I'm looking for an example code that filters a constant signal with outlying da
ta points and small amount of noise. I cannnot use a average because the outlers are all on one side of the average value and will bias my data.
Thanks for the assistnance
Brian Wells
Space Research Institute
Auburn University, AL

Brian,
Can you try a running average using shift registers? With this, if the latest point is over x% outside of the running average, then do not include it. Since your signal is "constant," then frequency filters will probably not help you. See the attached example in LabVIEW 6.0.2. The interesting part of this example is that you need to know what your expected value is. If this is unknown, then one must do a bit of statistics (probably through histogramming) to get an initial average value.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask
Attachments:
Remove_Outliers.vi ‏62 KB

Looking for simple gmail tray notifier for fluxbox

As said: I'm looking for a really simple tray notifier that supports gmail, and it needs to work in fluxbox. I'm having no luck with the package search, since with most stuff I can't tell if it'll work with gmail.

skymt wrote:How is it broken? It works for me.
For me, not so much. Judging by the comments in the AUR, it seems I'm not the only one.
$ checkgmail /usr/lib/perl5/site_perl/5.8.8/i686-linux-thread-multi/Gtk2.pm line 62.
Warning: Crypt::Simple not found ...
Warning: Crypt::Blowfish not found ...
Warning: FreezeThaw not found ...
CheckGmail requires the above packages for password encryption
Please download and install from CPAN (http://search.cpan.org) if you want to use this feature ...
XMLin() requires either XML::SAX or XML::Parser at /usr/bin/checkgmail line 3603
A thread exited while 2 threads were running.

Looking for simple touch-to-command utility

More and more people are using laptops these days, but the number of utilities providing extra touch functionality seems still lacking. I'm looking for a simple utility that will let me bind (multi-) touch gestures to keybindings, and preferably also commands.
For instance:
2-finger swipe-left > Mod1-arrowleft
3-finger swipe-up > exec dmenu_run
Does anyone know of such a utility?

litemotiv wrote:
More and more people are using laptops these days, but the number of utilities providing extra touch functionality seems still lacking. I'm looking for a simple utility that will let me bind (multi-) touch gestures to keybindings, and preferably also commands.
For instance:
2-finger swipe-left > Mod1-arrowleft
3-finger swipe-up > exec dmenu_run
Does anyone know of such a utility?
Hey litemotiv,
Easystroke will do that. I use it with my stylus/tablet to execute apps, commands, text, (ie: passwords, signature, etc), key-bindings, etc... While easystroke <upstream version> isn't multi-touch, there does happen to be a multi-touch version - but as a disclaimer ~ i haven't actually used the MT version. However, here is a link to the blog about it (english translation);
http://translate.google.com/translate?u … 1&ie=UTF-8
It's also in the AUR;
http://aur.archlinux.org/packages.php?ID=54495
let me know how it works out! (i plan on going multitouch soonish)
cheerz
Last edited by triplesquarednine (2012-01-14 21:41:09)

Looking for simple movie player

I am looking for a very simple player with the following characteristics:
* all mplayer keyboard shortcuts (I imagine some kind of mplayer wrapper application)
* buttons for play/pause + scrollbar/progressbar + mute + volume
* ONE dialog with: path to a movie, path to a subtitle, choose subtitle encoding, subtitle font (eventually)
THAT'S IT, nothing more.
Codeine is close to being a perfect simple movie player, but the subtitle thingy doesn't really work as I'd like, from my testing.

try kmplayer or kplayer.

Looking for simple line drawing program [Solved]

I am looking for a simple line drawing program with the following features :
command-driven ( line, circle, ellips and such commands)
used commands need to be exportable or copyable
2D
a canvas with arbitrary size
libreoffice Draw, Koffice Karbon and xfig are not suitable for this.
I have some experience with Autocad, but no access to that anymore.
Any suggestions ?
Last edited by Lone_Wolf (2011-04-03 13:34:57)

keenerd wrote:For really simple stuff (and extremely keyboard driven!) I'll make an SVG by hand. Any xml aware text editor works great. The spec is pretty simple. Use an image viewer that will automatically redraw when the SVG is updated.
+1 http://www.w3schools.com/svg/tryit.asp? … 1&type=svg
I think TeX can draw alright.
A bunch of links - never tried them, don't know if they even work:
http://www.ribbonsoft.com/qcad.html
http://www.linuxcad.com/
http://ipe7.sourceforge.net/
Last edited by karol (2011-04-03 01:12:44)

Looking for simple search example using SELECT

Can anyone link me to an example of how to create a basic search page where the search criteria is selected in a drop-down list (<SELECT> in HTML)?
Here's where I'm coming from so you have a better idea of what I'm trying to do. I've created a search page by creating a method in my App Module java class using setWhereClause(), then dropped my view onto my web page as a read-only table, and finally dropped the method and parameter as a command button and input text field, respectively. This works fine, but I'd like to replace the input text field with a select box so that the users will not have to type in their search criteria. I'd like to populate the drop-down with data from a table, which will then be sent as the argument for the method.
I can create a ViewObject that contains the data I need, but I'm not sure where to go from there. I don't know how to create the drop-down list or connect the command button to the list. (Ultimately, I'd like to have the search text submitted when the drop-down changes, but I'll settle for pressing the button for now). I've fooled with using the LOV component, but without any luck.
Step-by-step would be great, but if you can point me to an example, some documentation, etc., that would be great too.
Thanks,
Andy

Excellent - Thanks for the link to the sample code page. I thought I had seen all the tutorials, etc. but for some reason never came across this page. The example you cited looks like it's just what I'm looking for.
(Edit - For anyone who's interested, here's a step-by-step for creating a databound drop down list:
http://www.oracle.com/technology/products/jdev/tips/mills/databound_lists.html )
Andy

Looking for simple "hide/unhide" method...

Hi,
I'm looking for a way to hide/unhide specifically targeted divs.
Example :
<a href="hide_div1, hide_div2, show_div3">Link</a>
<a href="hide_div1, hide_div3, show_div2">Link</a>
<a href="hide_div2, hide_div3, show_div1">Link</a>
<div id="div1">Test 1</div>
<div id="div2">Test 2</div>
<div id="div3">Test 3</div>
Know what I mean?

You are correct, the problem was not what I thought it was. It was a z-indexing issue, which I've fixed. So the link you provided ended up being great for my purposes.
Now, how difficult would it be to add the fadeIn/fadeOut jQuery behavior to this?
Current code :
function HideContent(d) {
    document.getElementById(d).style.display = "none";
function ShowContent(d) {
    document.getElementById(d).style.display = "block";
function ReverseDisplay(d) {
    if ( document.getElementById(d).style.display == "none") { document.getElementById(d).style.display = "block"; }
    else { document.getElementById(d).style.display = "none"; }
http://api.jquery.com/fadeIn/
http://api.jquery.com/fadeOut/
I honestly don't know enough about jQuery to integrate the fade intelligently (or in any way that would actually work).
In other words, when hiding an object, don't have it instantly disappear : have it fade out. When showing it, same thing : fade it in.
This would be all kinds of awesome.

Looking for "Simple Trace" Settings

Similar Messages

Maybe you are looking for