Looking for SNMP MIBs for RV routers

Everything is in the title.
I dug into Cisco's MIB ressources. Found a lot of MIBs but none corresponding to the RV routers.
Did anyone here have other source of information ?

Hello,
All the RV Router's support SNMP v1,2 and newer ones support v3. CNA and Prime Infrastructure will work.
There is also a browser plugin called FindIT. This is a free tool that will discover any SMB devices on the network providing IP addresses, MAC addresses, Versions, and allows you to manage each devices.
http://www.cisco.com/c/en/us/products/cloud-systems-management/small-business-findit-network-discovery-utility/index.html
I hope this helps.
Regards,
Chris

Similar Messages

Snmp mibs for solaris 9 sparc edition - cannot be found anywhere

i am looking for the mibs to download for solaris 9 sparc, but they are nowhere to be found on sun's site. can anyone point me in the right direction of where they can be obtained?
any other information regarding sun and snmp is appreciated as well.

Here is where you find them:
http://www.sun.com/download/products.xml?id=454bc019

Need SNMP MIB files For Cisco SF 300-48 48-Port 10/100 Managed Switch

Hi All,
I need SNMP MIB files for Cisco SF 300-48 48-Port 10/100 Managed Switch.
I have gone through cisco site but not able to get it.
Can anyone please provide me.I have stuck with this.
Thanks
Ram

Hi Ram, yes the MIB can be used. The switches are essentially the same in many regards (especially on a software level).
I do not know the OID for bandwidth. If you're looking for a particular OID may be this tool helps you
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=dot1dTpPortTable&translate=Translate&submitValue=SUBMIT&submitClicked=true
-Tom
Please mark answered for helpful posts

SNMP MIB for Solstice DiskSuite 4.2

Hi all,
Does anybody know where I can get the SNMP MIB for Solstice DiskSuite 4.2 ?
Any help will be appreciated,
Thanks,
Simon

Yes, but some versions of VxVM require a 'rootdg' remain. You may or may not prefer to simply use VxVM to mirror root.
The packages are on disk2 of the installation media in the EA folder.
Darren

SNMP MIB file for Grid Control

Looking for the MIB file for traps coming out of Grid Control 10gR2. It looks like they're under enterprises.111.15 in the traps I've seen.

check in AGENT_HOME/network/doc

Looking for MIBs for Various PowerVu Equipment

I've scoured the cisco.com website looking for MIB's and apparently, they aren't there or I just can't find them. I'm looking for MIBs for the following PowerVu Equipment...
D9854
D9828
D9850
D9824
D9858
Thanks!
Bob

Hi Bob!
Do you have a CCO ID? If you have a Cisco ID, we can give you access to our File Exchange Server. From there, you can access MIB files and receiver upgrade files. If you don't have a Cisco ID, please register to get one:
https://tools.cisco.com/RPF/register/register.do
Let me know your CCO ID, and I will forward details.
Fred

SNMP MIB for N5K log message

Hello,
we have a N5k platform experiencing bug:CSCtn71292. Customer wants to monitor below log message, using NNMi.
%SYSMGR-2-VOLATILE_DB_FULL: System volatile database usage is unexpectedly high at 88%.
To do that it would need a SNMP MIB. Can anyone please let me know how this can be achieved? Or is there any MIB which I should use?
Many Thanks,
Girish

Hello,
The SNMP manager is using an incorrect community password to query the SNMP agent that on your Catalyst 6509.
I can see that multiple managers fail to authenticate with your switch. Please check your configuration to see if the password is consistent with your NMS configuration.
#show running-config | include snmp-server
HTH
--Leon
* Please rate posts.

SNMP MIB to configure the routers and switches

I have snmp write community string configured on all routers and switches. I am looking for a SNMP MIB to configure a command to Cisco routers and switches using SNMPSET option. Can some one point me in right direction for SNMP MIB values to write commands on routers and switches ?

Hi,
there are many, many mibs. Depends on what you are interested about, use search function on CCO. This is voip forum, there is another for network management.

Look for SG200-26 OID

Hello and sorry for my English.
I use SNMP for my Cisco, more than 30 Cisco switchs in my network.
we had buy a new model : SG200-26 and i don t find OID for this switch like others, i think that most of MIB are not supported :-(
I look for :
ciscoMemoryPoolFree
CpmCPUTotal5minRev
ciscoMemoryPoolUsed
thanks for help

I suppose you mean I should add the address of the switch instead the one you added.
I already added the switch address to list of trusted sites, but this not helps.
Please keep in mind, that I have this behaviour on several different browsers on different machines:
Desktop client
- IE11 on Windows 8.1x64
- Firefox 34 on Windows 8.1x64
- Iron 35 on Windows 8.1x64
Notebook1
- IE11 on Windows 8.1x64
Notebook2
- IE11 on Windows 10
Cell phone:
- Chrome 28 on Android (KitKat)
- Firefox 34 on Android
iPad:
- Mobile Safari 8 on iOS 8.1
- Chrome 39 on iOS 8.1
Additional Info:
When opening the online device emulator under https://www.cisco.com/assets/sol/sb/Nikola_GUI/SG_200-50P_v1_1/config/home_sx200.htm
I shortly see the menu text on the left side until it disappears. Then I see a mixed picture (text on main screen, only boxes on menu frame)

On my iPod touch it says on the settings I have wifi but when I look for the 3 bars there is no wifi please help

On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. already suggested
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Looking for a better solution that tunnel interface

Hi
acctualy I have a Vsat connection between my remote site and central office
on both site we have router and sat modem
I have now a tunnel interface between my two routers,I am looking for a better idea,,

hi...
so you have tunnel interface between your two router so now what are you looking for...?
secure IPsec connection or what???
please explaine in details
regards
Devang

Looking for some VPN advice on c7200 and possible serious problem

Hi all,
I am looking for some advice on how to figure out few things.
customer has a c7200 with VPN module and seen the following
15.2(4)M4, RELEASE SOFTWARE (fc2)
Vpn7# Show crypto isakmp sa
Exemple: x.x.x.x y.y.y.y QM_IDLE 14020 ACTIVE ( repeated around 700 times)
Vpn7# IKE-Session : 2517 active, 5120 max, 3169 failed
Hardware Encryption : ACTIVE
Number of hardware crypto engines = 1
CryptoEngine VAM2+:7 details: state = Active
Capability : IPPCP, DES, 3DES, AES, RSA, IPv6, FAILCLOSE, HA
IKE-Session : 2800 active, 5120 max, 3169 failed
DH : 55 active, 5120 max, 0 failed
IPSec-Session : 1628 active, 10230 max, 0 failedhe would like to know whether these messages allude to some kind of serious problem or show the normal operation of vpn routers. because they need to analyse their business related incidents and do prevent actions
therefore if someone could give give me some advice if there is any problem with the hardware i would greatly appreciate it
thanks in advance
Lance

I'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
And how do you find a good marketer?
I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
Good luck!

Looking for a solution or service to export data from a dynamic form into a database

As the title of this discussion states, I'm looking for a solution or service to export data from a dynamic form into a database to be used for reporting. Creating the dynamic form is not a problem, it's getting it into a database that's more of a nuisance. A dynamic form is needed in order to provide skip logic, hide/reveal, and other similar dynamic features.
The database hasn't been created, so just looking for the easiest, more effective and dependable solution. The key is being able to run reports off the data later.

So i set up 2 residential grade routers to test this out. Seems to be working okayish. I believe with directional antenae routers I should achieve what I need.
As for security I configured each device separately. I set them so only allow the MAC address of the other through wireless. This seems to be the best system for me. Once they are connected even if a MAC is spoofed of the other router it drops automatically because they are always connected. My wired devices get plugged in and recieve an IP from my main network.
There more testing to be done, but it seems to be working.
Thanks for your input and suggestions guys. I will be marking this topic as answered.

I am looking for a fast gigabit router

I am looking for a fast gigabit router that has mac supported software. I see lots of vendors selling mac routers, but not fully supporting them. Not that I ever use any of the boxed software, but I would like a company that is mac savvy.
thanks,
sleeper

If you are patient, it appears that the new Airport Extreme base station is a gigabit ethernet router according to the new iMac's press release:
http://www.apple.com/pr/library/2007/08/07imac.html
"Build-to-order options and accessories include: a 2.8 GHz Intel Core 2 Extreme processor, up to 4GB DDR2 SDRAM and up to a 1TB Serial ATA hard drive on the 24-inch iMac; up to 4GB DDR2 SDRAM and up to 750GB Serial ATA hard drive on the 2.4 GHz 20-inch iMac; and up to 4GB of DDR2 SDRAM and up to 500GB Serial ATA hard drive on the 2.0 GHz 20-inch iMac. Additional options include: new Apple Wireless Keyboard and wireless Mighty Mouse; *AirPort Express® and AirPort Extreme Base Station (now with Gigabit Ethernet);* the AppleCare Protection Plan; and pre-installed copies of iWork™ ’08, Logic® Express 7, Final Cut® Express HD 3.5 and Aperture 1.5. "
Take a copy of that to the store, and ask them when their stock of Airport Extreme base stations will include that.
Message was edited by: a brody

Looking For Optimal Wireless Settings For Multiple WRT310N's

Folks, I have 3 Linksys WRT310N routers (all at the most current level firmware) around my house serving as both wired and wireless access points. I have Verizon DSL service (3 MB) as my ISP. We have a couple of IBM T60p laptops (w/Win XP Pro), a Lenovo S12 netbook (w/Win 7), and my son also has an Apple iPod Touch all that access our home network via the wireless network provided by the WRT310N's. The WRT310N's all have unique static IP addresses (DHCP disabled - IP addresses being issued by the Verizon DSL modem/router). My current wireless settings are as follows:
Wireless / Basic Wireless Setings:
Wireless Configuration = Manual
Network Mode = Mixed
Network Name (SSID) = (something other than linksys!)
Radio Band = Auto
Wide Channel = Auto
Standard Channel = Auto
SSID Broadcast = Enabled (Need enabled or the Apple iPod Touch will not find the wireless network)
Wireless / Wireless Security:
Security Mode = WPA2 Personal
Encryption = TKIP or AES
Passphrase = (Something really clever here!)
Key Renewal = 3600 seconds
Wireless / Wireless MAC Filter:
Enabled (With all the appropriate MAC addresses permitted)
Wireless / Advanced Wireless Settings:
AP Isolation = Enabled
Frame Burst = Enabled
Authentication Type = Auto (greyed out - can NOT change)
Basic Rate = Default
Transmission Rate = Auto (greyed out - can NOT change)
N Transmission Rate = Auto
CTS Protection Mode = Auto
Beacon Interval = 100
DTIM Interval = 1
Fragmentation Threshold = 2346
RTS Threshold = 2347
My goal is obviously to provide the best performance on all the wireless devices that we have. Since the laptops and netbook have a variety of OS's (and sometimes our neighbor comes over with his Mac laptop) I'd like to keep it flexable for those PC's and the Apple iPod Touch. I've also read that if you have multiple wireless access points you should set them all to different channels. If so, which channels? Or, should they all be on the same channel so one could walk from room to room without losing their wireless connection? Since I have 3 WRT310N's I'm interested in what recommendations there are for performance to keep the laptops and netbook communicating using wireless "N" yet keeping compatible for the Apple iPod Touch on wireless "G". Thank you all in advance for any advice or info.

Hmmmm, for quite some time I've left the SSID the same on all the WRT310N routers. At one time a while back I was told to do this by a Linksys technician. They all are cascaded (LAN-to-LAN via the ethernet ports) off of the 4 ethernet ports on the Verizon DSL modem/router in the similar manner described in the following article:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=96&s...
(Switch) ethernet port 1 on each WRT310N is connected to ports 1 through 3 on the Verizon DSL modem/router. Hence, each WRT310N is acting as an access point (wired and wireless) throughout the house. I do NOT use the 'Internet' port on any of my WRT310N routers. They each have a static (fixed) IP address like 192.16.1.10, 192.168.1.11 and 192.168.1.12. They all reside on the same LAN subnet as my Verizon DSL modem/router which is responsible for issuing DHCP IP addresses for the entire home network. The remaining (switched) ethernet ports 2, 3, and 4 on each WRT310N is left open for local hard-wired devices like printers and multimedia devices (like XBox 360, etc.). So bottom line is that each WRT310N is acting like a 4-port network switch that also has wireless capabilities (like a WAP).
By keeping the SSID the same on all the WRT310N routers I can keep a single wireless profile on each device (i.e... PC's) for my entire house. So I can go and access WRT310N #1 (with let's say with SSID 'ABC') in my living room and later go into my home office room and access WRT310N #2 (with the same SSID - 'ABC') with the same wireless profile. I believe it is the same concept used when someone stays at a hotel and accesses their public wireless network. That way the hotel customers only have to set their SSID to let's say 'HILTON' regardless of which floor or room they are in.
So the part that I'm really focusing on is the wireless performance aspect. My laptops like to operate on 'N' and get pretty good connection speeds (usually receive around 270 Mbps). The Apple iPod Touch (2nd generation) only goes up to 'G' so I believe I need to keep a 'Mixed' Network Mode. The part I'm not so sure about is the Channel Width and whether or not all 3 Linksys routers should be on the same channel (or set to Auto) or if I should manually set the channels and provide some separation between their channels. That's where 'Channel Width' and 'Channel' settings get a bit over my head. Now when I previously had multiple 'G' Linksys routers I contacted Linksys Technical Support and they said to use the same SSID and that I should separate the channels, but that was with their earlier 'G' versions. Now that I have a more recent [N] version and the channel settings can be 'Auto' I'm wondering if the correct settings would still be to again separate the channels or maybe leave it up to the routers to function in 'Auto' mode.
And if I need to set each router up individually what recommended settings should they be? As follows:
WRT310N #1:
Network Mode = Mixed
Channel Width = ?
Channel = ?
WRT310N #2:
Network Mode = Mixed
Channel Width = ?
Channel = ?
WRT310N #3:
Network Mode = Mixed
Channel Width = ?
Channel = ?
Here is a Cisco web page that I'm using as a reference:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=21194
I'm also looking for any suggestions on tuning the Advanced Wireless Settings like Beacon Interval, Fragmentation Threshold, RTS Threshold, etc. Again, my wireless user devices are both G and N and have various OS's.
Thank you again in advance for all your help!!

Looking for a wireless router / accespoint with radio time restriction

I am looking for a wireless router / accespoint with a radio time restriction but didn't find any information about this option. Are there any routers with the option to turn off the wireless signal between a specific time?
The router will be used at a small office .
I hope you can tell me more.
Cheers
Michel

Well there is No router which linksys/cisco manufacture that can stop the wireless signals to be broadcast for a specific time..
However what you can do is you can get into the setup interface of the router and disable the SSID broadcast and that will stop the router to broadcast the wireless signals...and whenever you need to enable it you can just go back into the setup page of the router and enable the broadcast again.

Looking for SNMP MIBs for RV routers

Similar Messages

Maybe you are looking for