Looking for software version 4.2.173 for my 8800

I have a software version 4.2.1.101 on my 8800. Its blutetooth version does not seem compatible with my car. i am looking for ways to download version 4.2.173 which is recommended by my car manufacturer. Can you point me to the right download URLsite? I do not seem to be able to find it.
Thks and Best Regards
Samy

A1367 indicates you have a 4G iPod. Those can go to iOS 6.1.6.
You can verify by see if the iPod has cameras, if yes it is a 4G
Connect the iPod to your computer and update via iTunes
iOS 4: Updating your device to iOS 5 or later
You need iTunes 10.7 or later on the computer

Similar Messages

  • Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi Cereskit
    Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
    Vicki

  • I am looking for software to store photos with.  I am not a fancy photographer, and really am just looking for the digital version of a photo album. iPhoto is not cutting it, mainly because it does not back up and restore easily on an external HD.

    I am looking for software to store photos with.  I am not a fancy photographer, and really am just looking for the digital version of a photo album. iPhoto is not cutting it, mainly because it does not back up and restore easily on an external HD.

    That's how Time Machine and iPhoto now work.  Restore the library to one of the external HDs, check it for the photos you want, export them to the boot drive and delete the restored library.
    If you know the file name of the photo you're looking for you can search for them in the TM backup using Find Any File.
    My workflow allows me to do that:
    1 - upload new photos to a folder on the Desktop.
    2 - name the folder to represent the contents and date: 01/03/10-Toads Bday
    3 - use a file renaming app to sequentially rename the photos in the folder to: 2010-01-03-Toads Bday-001.JPG,  -002,JPG, -003.JPG,  etc.
    4 - import the folder into iPhoto creating an Event with the same title as the folder.
    Now I can search for those file by file name with any app of my choosing.

  • I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

    I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

    I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.

  • I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message: "there was a problem downloading the software for the i

    I have an old iPhone 3Gs with software version 4.3.5,  I am trying to use it again, and it works fine, but I have not been able to update the software.  Every time I try, I get the following message:
    "there was a problem downloading the software for the iPhone, the network connection could not be established".  This happens even though I have a working internet connection.
    Besides that, all the other functions work properly, even synchronize apps and library.
    Will I be able to update the software?

    look around the forum tons of people repport that they can't update
    makes you suspect that apples update servers can't meet the depand of too many users
    trying to update at once

  • Looking for crm software for mac

    I am trying to figure out which crm software is the market leader for mac? Which offers ease of use for new users?

    The best suggestion I could give you wouldn't be necessarily a Mac app, but its a cloud CRM written in HTML5 and CSS 3, so it's accessible from any browser and they have native mobile and desktop apps coming soon.
    It's JobNimbus. By far the easiest CRM software to use, which is something you really have to look for. Everyone CRM says they're easy to use, but the industry in general just drowns in bad adoption rate (see here) because of the terrible software they make, so you have to get in and try it out.
    JobNimbus has a free 30-day trial of their Pro version, but you can still use it after that as a Basic version with less features. It's also not just CRM, but also project management, so it makes it even easier to streamline your workflow.
    Go ahead and check it out, maybe try it for a couple days and see what you think: http://www.jobnimbus.com. Their customer service rocks too. I'm using it and can tell you, you won't be disappointed.

  • Anyone looking for Software Engineer(LabVIEW/C++) opportunity in Pittsburgh, PA?

    Hello, my name is Nicholas Ricchiuto and I am looking for a Software Engineer (LabVIEW/C++) for a company in Pittsburgh Called Acutronic.  If you know of any Software Engineers looking for work, please pass along my information below, I could sure use your help.  Thank you very much! -Nick
    Nicholas Ricchiuto
    B&V Stafffing Inc
    724-933-5218
    [email protected]
    ATE Software Engineer (Pittsburgh, PA –RIDC Park)You will be responsible for a challenging new product development. In this role you will implementcomplex automated test algorithms and data acquisition software for inertial sensors and MEMS(micro-electro-mechanical systems) inertial devices.Your roles/responsibilities will include:• Translate marketing inputs into detailed requirements and planning documents• Design, code, debug, document and maintain software code in LabVIEW and C/C++/C#.• Plan and execute software releases• Plan and accomplish goals relying on experience and judgment Your qualifications/skills should include:• BS in Electrical Engineering, Computer Engineering or related field; MS preferred• 7+ years experience in automation, data acquisition, or related software development• Experience with National Instruments LabVIEW, Test Stand, and related tools• Experience developing user interfaces with National Instruments tools• Experience with defect tracking, configuration management and version control tools• Knowledge of C, C++, and real time operating system functionality a plus• Familiarity with all aspects of automation engineering including mechanical, electrical, controls, andinstrumentation disciplines• Experience with serial communication and networks in general• Experience integrating automation systems• Good knowledge of computer hardware and systems• Understanding of software process issues• Familiarity with SCRUM or other agile software development a plus• Experience in testing inertial sensors a plus• Must be a US Citizen or Permanent Resident

    Please post this to the LabVIEW Job Openings board.

  • Looking for PDF Software

    I couldn't find an appropriate category for this question. I'm looking for PDF software for my Mac. Adobe Acrobat Writer is ridiculously expensive so I'm wondering if anyone else uses another PDF writer. Also wondering how old a version of Adobe Writer will run on my 2006 Intel MacBook.

    A basic work around, with a few possible issues, may be to use the
    Print option to 'save as pdf' so using another application and see if
    this works (outside of saving a web page or other content) with a
    word processing application, such as Text Edit.
    There may be a way to use an older Adobe Acrobat (for OS X) in
    the later version on Intel hardware, since it may be able to work
    in Rosetta environment; this will consume more system resources
    if it does work there. The ideal minimum system requirements are
    on the retail packaging for Adobe Acrobat related products; so the
    manufacturer's web page or some other information source may be
    able to shed more light on these details in obsolete software.
    Of course, since the Intel Mac can't run Classic/9 that limits useful
    yet out of date other versions of older Acrobat or Adobe products.
    There should be a support forum for Adobe acrobat and other apps
    directly linked to their site online.
    There may be some freeware or shareware capable of making .pdfs
    from other documents, not sure how advanced they'd be. For a time
    I had a few freeware utilities for working with .pdf items, to combine
    and compress; and break them smaller so I could email them, some
    years ago when attachments had to be smaller than in gmail.
    In a google search window, you could find and screen some possible
    options; I noticed (without entering mac or osx) I get some options in
    a list possible pre-search topics when just entering ' make pdf ' in a
    new google search box; other choices appear below my entry...
    By adding the suffix ' mac os x ' to my search terms, I get proof of
    concept (been using it for years) of making a pdf document from
    a text editor or word processor document, by using Print options:
    "How to create adobe acrobat PDF documents"
    http://clc.its.psu.edu/Labs/Mac/help/software/howtocreatepdfs.aspx
    There may be a freeware utility among the download links at
    VersionTracker or macupdate pages; among their other items.
    Also, in Apple Support there are third party software D/L links.
    In shareware applications for handling pdf content, there are
    editors which allow one to edit or use pdf documents that are
    blank or need words added, and correct or fill them out; or
    to change content on documents you have authorization for.
    This usually costs. A few may provide a limited use demo.
    An example of a shareware editor tool (not free) is this one:
    PDF Editor Tool - PDF Studio - edit pdf on Linux, Mac, Windows:
    http://www.qoppa.com/psindex.html
    Good luck & happy computing!

  • HT1338 looking for an old mail version

    Hi, i'm looking for an old MAIL version for 10,6,8 OSX.
    I can't find it in the installation CD. I can't find it on the web.. Someone coud help me ? Thanks

    Yes.  The mail version you require is 4.6 (1085).   This should be on the Snow Leopard Combo update per the link below.
    Mac OS X 10.6.8 Update Combo v1.1
    If you are still on 10.6.8 it will not hurt your files to download and apply it but be aware, it is a big update and takes some time.
    Oh, and if you do take up the Combo download, there are several software updates you must follow up with, dealing with security and iTunes.
    Message was edited by: seventy one

  • I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7.  Can't find "Software Update" option under General Setting.  Where might I look for the option to slightly upgrade the ISO for this device?

    I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7.  Can't find "Software Update" option under General Setting.  Where might I look for the option to slightly upgrade the ISO for this device?

    You likely have a 2G iPod and those can go higher than 4.2.1
    A 3G can go to 5.1.1
    IA 4G, with cameras can go to iOS 6.1.6.
    The 5G, also with cameras can go to iOS 8
    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    - A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
    - A 3G to 5.1.1  Requires iTunes version 10.5 or later
    - A 4G to 6.1.6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    - A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
    Identifying iPod models                                                         

  • Installation of Blackberry Desktop Software fails: looking for Blackberry 8310.msi file

    I cannot successfully install and use any version of the Blackberry Desktop software.  The problem started when I tried to install the desktop software on my new computer from a file I downloaded and stored on an external hard drive that had been attached to my old computer.  The install/uninstall programs lists Blackberry desktop 4.2.2.  It appeared to install correctly, but when I try to use it,  I get a message saying the program is trying to use a network resource that is not available, and looks in a temp directory for this "Blackberry 8310.msi" file.  There is also a program listed as "Blackberry v4.2.2 for the 8310 series wireless handheld"  When I try to uninstall it, it looks for that same .msi file.
    I'd like to be able to sync my calendar with my phone. 
    Does anyone know what I should do?  I followed the clean uninstall directions, and that didn't make a difference.
    Thanks.

    SDR wrote:
    Xandrex, I am having the same problem (along with a few others).  I hate to sound like a novice, but how do I decompress into a folder other than temp?  Whether installing from the website, or saving to my desktop and then installing, it unzips without giving me a choice of where to put the files.
    Hello,
    I don't have the install at home so my answer will be approximate. when you get the .exe file, it is in fact a zip file with a small launcher that knows it has to unzip the stuff in your temp file.
    What you need is a decompression tool to decompress without that launcher. You can install 7Zip that is quite good for those things.
    You can also try WinZIP or winRAR or winACE but those are not free-of-charge.
     http://www.7-zip.org/
    Once you have installed this tool, just open 7Zip and browse to the .exe file. click on it, there should be a button "Extract". Choose a folder (somewhere on your Desktop for example) and wait for the decompression to finish.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • For Mac OSX version 10.9.4 looking for the preference tab

    I want to print just a portion of a page but can't find a preference tab. I highlight a section of a page so I can print just that section but I am unable to find a preference tab, I have a HP 6600 all in one and have a new Mac version 10.9.4 Mac OSX
    What am I missing?

    Hi pagosselin,
    Welcome to the HP Forums!
    I see that you are looking for the preference tab in Mac OS X 10.9.4 with your HP 6600 so you can print just a section. and I am happy to help you!
    Please try the following:
    Reset the printing system. OS X Mavericks: Reset the printing system.
    Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
    Make sure you have the full feature software and drivers installed. HP Officejet 6600 e-All-in-One Printer series Full Feature Software and Driver - OS X 10.9 Mavericks.
    After that you will want to make sure the correct driver is selected. Make sure it says HP Officejet 6600 instead of the HP Photosmart that is shown in these images, and not Airprint.
    Let's start with that, and we will go from there!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Looking for a Photo Album or Photo Management Software

    Does anyone know of any good software that I could use like a photo album, something like iView Media (which I have) but maybe a little more visually appealing. I'm not looking for anything to host pics online; I just want something that lets me break down my pictures by year...and then sub-folders for each year so I can have all different subjects. I haven't been able to find anything no matter how much I've googled...THANKS!!

    Medic2872P:
    Welcome to the Apple Discussions. As TD mentioned you can use iPhoto in the alias mode but you take on some additional responsibilities. When you delete a photo from the iPhoto library you do not delete it from the HD. That must be done manually from the Finder. It can be pretty easy to do that before deleting from iPhoto by Control-clicking on the thumbnail and selecting Show Original in the contextual menu. You'll be taken to the folder where the source file is located where you can delete it manually. Then delete it from iPhoto.
    Secondly, you won't be able to add photos to existing source folder and have them imported into iPhoto automatically. So it's best to put each new import in their own folder and import that way. Also you should not rename or move a source file once it's been imported into iPhoto.
    If you're interested in checking it out more thoroughly, read Tutorial No. 2.
    If do decide on converting to an alias based library and want to preserve your keywords from the library, Tutorial #1 would be of help. You can follow #1 and then move the photos from the Originals sub folders into your other folders in the Pictures folder and replace the old files with the keyworded files. Next remove the old Library folder to the desktop, create a new library and set iPhoto's Advanced preferences to not copy file when importing. Then import your "source" folder into the new library and you're back in business.
    But you should remember the caveats I've mentioned. If you're careful you can operate as you'd like.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM;   Mac OS X (10.4.9)   22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

  • Looking for software for OS 9.x

    Hello,
    I hope post it on rigth place.....
    i'm from brazil..
    I use my mac to work with music...
    but I can't find out a website with software for mac os 9.2.2.....
    please, for mercy, help me
    i've found just os x...
    please help me
    thanks a lot
    Rafael

    you can try Version Tracker www.versiontracker.com/macos or Pure Mac www.puremac.com two places that have great free programs for Mac OS 9. what audio program do you use for OS 9 because i too have been looking for a good audio program for my iBook clamshell.

  • Looking for Win-based sound-editing software to work with AAC files

    Hi, everyone.
    I'm a part-time indoor-cycling instructor. I create iTunes playlists to fit a certain types of "rides," transfer the lists to my iPod, then hook the player to the club's stereo system. Very slick.
    But not slick enough. There are some songs I don't want to play all the way through; I want to use only isolated segments of certain songs. And I want to employ crossfade. When cycling, it's important to keep the music coming; dead spots are energy killers. I want to stich in some stray bits of oddball audio, such as funny snippets of movie dialog and other nonsense, to keep the mood light. And I'm looking for a way to more precisely control track-to-track playback volume.
    I know I can isolate a segment of a song file by using the "start time" and "stop time" adjustments on the "options" tab of a song file's "get info" settings within iTunes. But I want to do more than that. Sometimes I want to play :20 of a song at one part of the ride, and :40 of the same song later in the ride, and I don't want to have to make a renamed copy of the song file to make it happen.
    I'm thinking what I need is sound-editing software. I want to create, say, a 60-minute playlist in iTunes, export copies (not the originals) of the songs in that playlist to the sound-editing platform, do my editing and create a single, 60-minute file that I can then load into iTunes and thus, transfer to my iPod. When I hook the 'pod up to the club's stereo, I would then play the single 60-minute "song" instead of the 60-minute playlist.
    And of course, I want to do it really cheaply, on a PC running iTunes for Windows. How's that for a challenge?
    If I had a Mac, I probably could use SoundStudio to do this, because it imports AAC files.
    What I need is a Windows-based editing platform that can import AAC files. If you know of such an animal, I'd appreciate hearing about it.
    If there is no such animal, here's what I think I'll have to do:
    1. Pluck song files from my iTunes music folder
    2. Create a CD containing mp3 copies of those songs
    3. Send those mp3 copies into the editing software
    4. Stitch the songs together in the editing software into a single file
    5. Export that file as a single mp3 file
    6. Have iTunes convert that mp3 file to mp4.
    Right? Or wrong? If anyone has advice, I'm all ears.

    The reason why I posted here was to hopefully find someone who has actually done this before rather than have someone throw packages at me that I can find on Google on my own.
    There are a number of SMS gateways out there, but I have not used any of them. Setting up some of them is a very time consuming process and I was hoping to get a heads up on one that that some else had used in the Solaris 10 x86 environment within a zone.
    I already have a working email version of this process which I put together very quickly, but using SMS would be a much better process for the techs out in the field.
    I won't have the actual GSM Modem in hand until Monday or Tuesday and am doing some preliminary work so that I can hit the ground running when it shows up.
    Thanks for your suggestions though.

Maybe you are looking for

  • Since trying to install the latest update my pc wont let me open, update or reinstall itunes

    hi there, ive tried everything i can think of, please help me. i tried to update my itunes but it came up with a message saying runtime error! program:C:/program files (x86)... R6034 an application has made an attempt to load the C runtime library in

  • Print Date issue in Dunning Correspondence

    Hi, I have an issue with Print Date in Dunning correspondence. The dunning proposal and activity run has happened. The correspondence printing will fetch the accounts from the database as per the print date. 1. I would like to know where and how the

  • (winxp+oracle11g) failed to connect oracle remotely.

    I installed oracl11g in my winXP host (ip1) and in another winXP (ip2) host reside in a vmware workstation which is on ip1 too. The vmware uses bridge to connect network. I can ping ip1 from ip2 and and vice versa, but i can not tnsping oracle on ip1

  • Converting files to import into iMovie HD

    I've been searching the forum but cant find anything that helps me... I have an mpeg (a .m2p file) I've tried converting it into all sorts of things to import into iMovie, using the likes of "ffmpegx" and "mpeg streamclip". I've tried converting to m

  • PS CS5 on a Mac, moving cropped images

    I'm using CS5 on a Mac, referencing Adobe Photoshop CS5:  Classroom in a Book.  I'm stuck on Ch. 10 "Advanced Compositing".  I cropped, applied and saved 3 images to move to another image.  However, when using the Move tool, the entire images are mov