Looking for Solution(How to wait some particular time in pi7.1)

Hi Experts,
We have a source folder with a number of files in it, same name but with date time stamp. PI reads the files and sends them to the target folder with one unique name. From the target folder the file is picked up and processed by SAP, which deletes the file after processing.
When the SAP process is too slow the next file cannot be stored as the former file is still in the folder. After (let's say) 3 failed tries, an email is sent to a support person and the whole process is aborted.
The support person needs to delete the file manually and in the next scheduled run the remaining files in the target folder together with new ones are read by PI.
Here is a proposal of how I think it can be done. I don't know if the second loop can be executed on the read files of the first loop. Additionally, the email may only be sent once. I know, we can use alert configuration for the email but I'd rather have the email sent as an inbound message
Regards,
Raja Sekhar

solved

Similar Messages

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Lost all photos on my iPhoto and get the ERROR WRITING TO DISK when trying to reload from Time Machine. iPhoto cannot import your photos because there was a problem writing to the volume containing your iPHOTO LIBRARY . Looking for solution.

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash, if possible.
Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ 2>&- | wc -l | pbcopy
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
The Terminal window doesn't show the output. Please don't copy anything from there.

Itunes stops working when i connect my ipad windows error message comes up looking for solution but then closes itunes.

Can anyone help my itunes stops working when i connect my ipad to my computer a windows error message comes up looking for solution but then closes itunes.

Hi tokley13,
To troubleshoot this issue where iTunes is quitting unexpectedly, please follow the steps in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

I am looking for assistence how to import an existing website in Dreamweaver CS4

I need help to import an existing website in Dreamweaver CS4

Only have one Dreamweaver CS4 installed, trying to get my DW CS4 disk I
bought installed on computer (done) I only need to figure out how to link
my website to the DW CS4 on my second computer.
L. Francesca Ferrari, L.Ac., DTCM, DMQ (China)
Ferrari Center of Chinese Medicine
222 Forest Avenue
Pacific Grove, CA 93950
831.818.3993
www.francescaferrari.com
L. Francesca Ferrari, L.Ac., DMQ (China)
Department Chair Medical Qigong Science
Five Branches University
This message, together with any attachments, is intended only for the use of
the individual or entity to which it is addressed and may contain
information that is confidential and prohibited from disclosure. If you are
not the intended recipient, you are hereby notified that any dissemination,
or copying of this message, or any attachment, is strictly prohibited. If
you have received this message in error, please notify the original sender
immediately by telephone or by return e-mail and delete this message, along
with any attachments, from your computer.
From: "Nancy O." <[email protected]>
Reply-To: <[email protected]>
Date: Sat, 04 Sep 2010 18:34:03 -0600
To: Francesca Ferrari <[email protected]>
Subject: i am looking for assistence how to import an existing
website in Dreamweaver CS4
>> I do not know where the site files are. They are on my initial Mac laptop
>> computer, and I use Hostway as my server.
Do you mean you lost your local copy of your site files from on an old
computer?
Log-in to your Remote Server and GET the site files using DW or your favorite
FTP application (Cute, Filezilla, WS_ftp, etc....)
>> But I was distinctly told my the call yesterday with Adobe that I must have
>> CS5 to get my website, www.francescaferrari.com with Dreamweaver on my
>> second computer.
Which version of DW did you have before?
How many installations of DW did you have? You can have up to 2 at a time.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
>

Windows 7 with iTunes 10.5 keeps telling me iTunes quit working, looking for solution, then tells me Windows will let me know when they find a solution. Help, my phone needa to be synched.

Windows 7 with iTunes 10.5 loaded and working until I try to update apps or synch my iPhone 4. Windows says iTunes quit working and is looking for solution, then no solution but they tell me if they find one.

Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert

Looking for a SIP VOIP with some free trial credit

Hi...
Looking for a SIP VOIP with some free trial credit
Can anyone suggest any ?
Harry

Hi...
Looking for a SIP VOIP with some free trial credit
Can anyone suggest any ?
Harry

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi, a dvd got stuck in my mac mini and after looking at solutions online and attempting some not only has the dvd not ejected but my mac wont turn on properly, there is simply a white blank screen, can anyone help me please? thanks

Hi Claire, sounds dire, but some things to try...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Due to the requirement of a UUT report with pageheaders, I am looking for solution to print an MS Access report from TestStand. I am using TestStand 4.2 and LabView 8.6.

Solved!
Go to Solution.

You can customize your process model with LabVIEW steps. You can connect to the access database http://digital.ni.com/public.nsf/allkb/1D5EB4DCBD13106486256B9D005E11B0 you can also get the data and format it and print it with the report generation toolkit, or you could see if Access exposes those functions through an ActiveX server. What functionality exactly are you looking for, and at the end of the day how much time are you willing to develop your own customized microsoft access reporting function?
Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

Looking for Solution manager SMI310_04 material

Can anyone please send me the solution manager material SMI310_04. I really appreaciate your help on this. I have an assignment at my work place to configure the SM.

Hi Ram,
If u r looking for Installation guides they are availoable at the following location.
https://websmp108.sap-ag.de/solutionmanager
Elese if u r looking for some scenario setup like service desk and CM, i hope its a small big fight.
But i suggest you check out the RKT roadmap as i am sure they would be hepful in ur activity.
http://service.sap.com/rkt --> Solution manager
If u have any specific requets other than this do post out so that i can help in any possible views formmy side.
If this info is helpful, please award points.
Bet Regards
Sri

Looking for formula to fill dates of particular days of week for a given month

Hi
I have a Numbers document with a sheet for each month of the year, named "January", "February", "March", etc.
Each sheet contains a table as follows:
I am looking for a function that will calculate the dates in a given month that I am due to see each client, based on the year (contained in a single cell table on a seperate sheet) and the month of the sheet (I am presuming that a function can refer to the name of a sheet). These dates would populate the cells under "Session 1", "Session 2", etc. (for some days of the week there may be only four sessions, for others five).
I hope this is clear, and would be grateful for any help in getting this working.
Thanks,
Nick

Here's an example, using September, 2011 as the month.
Main Table:
A1: =DATE(Year :: A2,9,1)
This calculates the Date and Time value for midnight at the beginning of the first day of the ninth month of the year indicated in cell A2 of the table "Year" (September 1, 2011). It uses a Custom format to display only the month and year of this date. The Dates calculated in the rest of the table depend on the Date and Time value in this cell.
A2 - A11: Entered data. Not used in calculations.
B2 - B10: Entered data. The text values here are used as search-for values, and must match the text values in column A of the table Weekday lookup.
C2, Filled down to C10: =$A$1+MOD(7-WEEKDAY($A$1)+VLOOKUP(B,Weekday lookup :: $A:$B,2,FALSE),7)
This calculates the Date corresponding to the first occurrence of the weekday indicated in B during the month in A1. The result is a Date and Time value (used in formulas to the right). The cells use a custom format to display only the Day (of the month) number.
D2, Filled right to column F and down to row 10: =C+7
Calculates the date seven days after the date in column C.
G2, filled down to row 10: =IF(MONTH($A$1)=MONTH(F+7),F+7,"")
This is the same formula as used in D2, but adds a check to suppress the calculation if the result is not in the same month as other dates on the table.
Year: The requested single cell table to record the year.
Weekday Lookup: A lookup table from which to retrieve the weekday number for the day in column B of the main table.
Custom formats:
Select cells C2 - G10
Open the Inspector > Cell Format Inspector > Date and Time
Delete the unwanted elements from the workspace in the Inspector.
Repeat for cell A1.
Regards,
Barry
PS: Numbers cannot use the Sheet name or Table name as data for a formula unless the name is placed into a cell on a table.
B

Looking for eMac: How To Differentiate Between Models Document

Hello,
I have been trying to find an Apple help document about how to differentiate between eMac models.
I have found an article about iMacs, but can not seem to find one for eMacs. Here is a link to the iMac article, just so you can better understand exactly what I've been looking for:
http://docs.info.apple.com/article.html?artnum=58669
Does anybody know of a direct link to a similar article for all eMac machines? That would be amazing; thank you in advance for any help. =) *april

Hello Dave =)
Thank you for your help and for responding to my post.. The article you posted would have completely solved my problem, however, I, unfortunately, do not have access to serial numbers, and the serial number is mandatory for identifying eMac models in the article you posted. I appologize for not being more specific about exactly what I need.
You see, I am looking on eBay for a good, used, possibly older eMac for my mom. Unfortunately, nobody puts serial numbers in their eMac listings, so I can not properly identify and price compare different eMacs. eBay sellers only list such things as Model Name, Processor Speed MHz, SDRAM and Hard Drive GB, so I need a list to 'check against' like the iMac document. I am mostly trying to find out which eMac models came with DVD players, and also which ones are AirPort ready and AirPort Extreme enabled etc.
Would you happen to know if there's any such eMac model document?
Thank you again for posting to my question; I do appreciate it. *april
iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM Mac OS X (10.3.9) i love my little bubble computer

Nokia6280 isrestrected i am looking for solution

nokia6280 isrestrected i am looking for solution

nokia
made in finland
type:rm-78.model 6280
fccid id:qtkrm78
ic :661ad -rm78
code:532255
the company of this mobile 6280 is
t mobile this mobile is showing restricted
it might be stoled or lossing i bought it from out side want to know how can i find the the real owner of this mobile
or find any way to solve this problem
when i open it
it shows me the phone is restrected
please if any one can solve this problem for me
EDIT: removed IMEI numberMessage Edited by damocles on 11-Jan-2007
12:36 PM

I have a contract iPhone 5S Gold64 and I am looking for 6, HOW?

Hi,
I have a contract iPhone 5S Gold64 and I am looking for 6 Gold64. I don't want to purchase the original price of iPhone 6 Gold 64. How can I get trade in iPhone 5s which I have and get upgrade to 6 while I am still under contract.
Can I extend my current contract for 2 years for getting 6!
Please help me with that because I don't want to go to AT&T. They told that they can trade in my 5S and give me 6 without paying anything except do a new contract with them.
I want to stay with Verizon, but also I want to get iPhone6 with no original cost. I just want it for $199. How can I do that please.
Thanks

We don't want to see you go either king4arabs. I understand you want to get the new iPhone 6, it's exciting. However, when you signed the contract for the iPhone 5S, you agreed to fulfill a 2-year term with that phone. Since it's not fulfilled, you can purchase the iPhone 6 at full retail value, review eligibility for Edge http://vz.to/1mYDhk7 , so you can trade it and upgrade, or use our trade-in program http://bit.ly/GGnDDC to offset the full retail cost.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Teacher looking for solution to generating a document linked to class roster.

I'm looking for an electronic version of the label.
I want to create a document (like a worksheet) that has fields for Name, Hour, Date at the top. Then, I'd like the PDF to generate a worksheet per student on my roster, automatically filling in the fields with their roster info.
When printed, every student would get a worksheet with their own name on it.
Any thoughts?
Thanks,
Sundance Trosper

I think what you'ra after is an even handler like this:
interface ReceiveEventHandler
void receive(byte[] data);
public class Wrapper
private ReceiveEventHandler m_receiveEventHandler;
/** constructor */
public Wrapper(String dllName)
initialise();
void setReceiveEventHandler(ReceiveEventHandler receiveEventHandler)
m_receiveEventHandler=receiveEventHandler;
public void transmit(byte[] data)
send(data);
public void receive(byte[] data)
if(m_receiveEventHandler!=null)
m_receiveEventHandler.receive(data);
else
System.out.println("NO HANDLER");
where receive is called on a background thread:
use it like this:
Wrapper.setReceiveEventHandler(new ReceiveEventHandler()
public void receive(byte[] data)
System.out.println("Event handler called "+new String(data));

Looking for the best app that has a timer for self portraits for my Iphone 5

I am looking for recommendations for the best app for my IPhone 5. An app that allows you to take your own picture without having to hold the phone. Something with a timer?

Thanks, I checked it out but it didn't mention anything about having a timer so you could take your own picture without having to hold the phone.

Looking for Solution(How to wait some particular time in pi7.1)

Similar Messages

Maybe you are looking for