Looking for some best practice regarding Content Administrator access

Hi. I am looking for some best practice or rule of thumb from SAP or from different companies how they address Portal Content Administrator access in Production environment. Basically, our company is implementing portal to work with SAP BW. We are on SP 9. Basically, I am trying to determine if we should have 1-2 Portal Content Administrator in Production with 24/7 access or we should limit them from NOT having this. Can you share with me some ideas of what is right? and what is not?
Should we have access in Production? Or Should we have this access but limited? By the way, our users are allow to Publish BI reports/queries into Production.

Hello Michael,
Refer to this guide about managing initial content in portal.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00bfbf7c-7aa1-2910-6b9e-94f4b1d320e1
Regards
Deb
[Reward Points for helpful answers]

Similar Messages

Looking for a best-practices guide for developing in TestStand

I am looking for a best-practices guide for developing in TestStand. LabVIEW has its style guides and books, but there is very little published about TestStand.
Also, and I mention this since NI checks these entries as well, how about adding TestStand to the NI Developer Zone?
Thanks in advance for any leads or documents you can provide!

Thanks! I was stuck on entering "TestStand best practices" into NI's search engine, and never thought of entering "TestStand style guide."
If anyone knows of additional pertinent content, I would appreciate hearing about it.

Look For Transport Best Practices

Hi,
I am looking for transport best practices, so please answer the following questions on how your place of business handles :
1. If an object is modified in development and you decide that you you do not wish to move the modifications forward - Do you;
    a. delete the transport and release the locks
    b. create a corrective transport and move the transport through production
    c. release the transport and never import it into the next system
    d. something different : (Please explain)
2. If a transport is imported into QA and then you decide never to move it to production, do you:
    a. delete the transport and release the locks
    b. create a corrective transport and move the transport through production
    c. release the transport and never import it into the next system
    d. something different : (Please explain)
Thanks Rob
[email protected]

I was always taught never to delete a transport. The changes should be reversed in the same transport and moved forward or released and the corrective transport moved forward in the same import queue.
If the transport goes to QAS then it needs to move to production. A corrective transport should be imported into production in the same queue.
I am sure you can get 20 different answers on this, but this is my policy.

Looking for BODS Best Practice document

Hi,
Can anyone pls. share BODS best practice document in case you have any. I tried to find out from net and i couldn't.
Thanks and Regards,
Gannu.N

Ok you need some spoon feeding it seems. You should have checked the correct answer from the post and searched the key word "SAP Best Practices for Data Migration and Data Quality" in google.
Here's the link SAP Best Practices for Data Migration and Data Quality – SAP Help Portal Page
Also as a heads up, there won't be any single document which gives all the details you need. You need to narrow down your search and focus on the required material only.

Looking For Guidance: Best Practices for Source Control of Database Assets

Database Version: 11.2.0.3
OS: RHEL 6.2
Source Control: subversion
This is a general question aimed at database professionals, however, it is not specific to any oracle version, etc. Its a leadership question for other Oracle shops regarding source control.
The current trunk, in my client's source control, is the implementation of a previous employee who used ER Studio. After walking the batch scripts and subordinate files , it was determined that there would be no formal or elegant way to recreate the current version of the database from our source control - the engineers who have contributed to these assets are no longer employed or available for consulting. The batch scripts are stale, if you will.
To clean this up and to leverage best practices, I need some guidance on whether or not to baseline the current repository and how to move forward with additions of assets; tables, procs, pkgs, etc. I'm really interested in how larger oracle shops organize their repository - what directories do you use, how are they labeled...are they labeled with respect to version?
Assumptions:
1. repository (database assets only) needs to be baselined (?)
2. I have approval to change this database directory under the trunk to support best practices and get the client steered straight in terms of recovery and
Knowns:
1. the current application version in the database is 5.11.0 (that's my client's application version)
2. this is for one schema/user of a database (other schemas under the database belong to different trunks)
This is the layout that we currently have and for the privacy of the
client I've made this rather generic. I'd love to have a fresh
start...how do I go about doing that...initially, I like using
SqlDeveloper's ability to create sql scripts from a connected target.
product_name
|_trunk
     |_database
       |_config
       |_data
       |_database
       |_integration
       |_patch
       |   |_5.2A.2
       |   |_5.2A.4
       |   |_5.3.0
       |   |_5.3.1
       |
       |_scripts
       |   |_config
       |   |_logs
       |
       |_server
Thank you in advance.

HiWe are using Data ONTAP 8.2.3p3 on our FAS8020 in 7-mode and we have 2 aggregates, a SATA and SAS aggregate. I want to decommission the SATA aggregate as I want to move that tray to another site. If I have a flexvol containing 3 qtrees CIFS shares can I use data motion (vol copy) to move the flex vol on the same controller but to a different aggregate without major downtime? I know this article is old and it says here that CIFS are not supported however I am reading mix message that on the version of data ONTAP we are now on does support CIFS and data motion however there will be a small downtime with the CIFS share terminating. Is this correct? Thanks

I am looking for some help page regarding organizing bookmarks

Forgive me if I am mistaken, I have searched for some paragraph or any help page regarding organizing bookmarks but it returned zero results.
More specifically, I am looking for a way to separate my bookmarks into different categories for example, game links and mathematics links and this game link book mark folder (Say) could further be broken into folders like counter strike links, stronghold crusader links....
I shall be very thankful for any piece of advice in this regard
Best Regards!!!

Other things that need attention.<br>
See http://www.mozilla.com/plugincheck/
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r12
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
You can organize the bookmarks and create folders and sub folders ([[Bookmark folders]]) via the right-click context menu or the Organize menu in the Bookmarks Manager.
See also http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

Looking for customization best practices related to Timezone feature in EBS

Hi all,
We are updating our 11.5.10.2 env to deploy the TImezone feature and i'm anticipating some issues for the customized code as i'm not sure the developers followed best practices about handling dates.
Is there any documents where i can find the best practices to follow for customized coding in order to be compliant with the EBS Timezone feature ?
Like for instance, Date APIs usage or the work to do to convert Date data for interfaces ?
Thanks in advance
Chris

Is there any documents where i can find the best practices to follow for customized coding in order to be compliant with the EBS Timezone feature ?
Like for instance, Date APIs usage or the work to do to convert Date data for interfaces ?I do not think such a doc exists.
You may review these docs and see if it helps.
User Preferred Time Zone Support Guidelines for Applications 11i10CU2 [ID 330075.1]
User-Preferred Time Zone Support in Oracle E-Business Suite Release 12 [ID 402650.1]
Globalization Guide for Oracle Applications Release 12 [ID 393861.1]
Also, please log a SR to confirm the existence of the doc you are looking for.
Thanks,
Hussein

Looking for Security Best Practices documentation for Sybase ASE 15.x

Hello, I'm looking for SAP/Sybase best practice documentation speaking to security configurations for Sybase ASE 15.x. Something similar to this:
Sybase ASE 15 Best Practices: Query Processing &amp; Optimization White Paper-Technical: Database Management - Syba…
Thanks!

Hi David,
This is something I found on the Sybase site:
Database Encryption Design Considerations and Best Practices for ASE 15
http://www.sybase.com/files/White_Papers/ASE-Database-Encryption-3pSS-011209-wp.pdf
ASE Encryption Best Pracites:
http://www.sybase.com/files/Product_Overviews/ASE-Encryption-Best-Practices-11042008.pdf
If these do not help, you can search for others at:
www.sybase.com > serach box on the top right.
I searched "best pracitces security"
Can also run advanced search > I typed in "ssl" into exact phrase.
Hope this helps,
Ryan

Q: looking for a best practices on a reorg issue

I am trying to figure out how to reorg our BW PSAPODSD and PSAPODSI tablespaces. They both have partitions which seems to complicate the issue a tad. What I am trying to do is move the data to new tablespaces (PSAPTESTD and PSAPTESTI, drop the old ODS tablespaces and datafiles, recreate them as LTMS, then move from TEST back to ODS.
I've looked at using the oracle exp/import tools. I've looked into brtools/brspace tools. I am not sure which way to go that (a) will get all the data, (b) get/recreate all the bazillion partitions, and (c) recreate/rebuild all the indexes and the partitoned indexes.
I've already done an exp then an imp (to create the SQL) but do I need to do more than just go into the SQL and change the target tablespaces?
Does anyone have any method/scripts they can share?
Thanks in advance
Vince

Thanks for the pointer but it seems to be asking the same questions I am. The only PDF that I could get was the one from quest. Yours from LuLu I kept getting DB errors on the LuLu site.
Also, 3rd party options are currently out of the question. I have done reorgs on R3 systems but since they don't have partitions and sub partitions and such there didn't seem to be as much to worry about.
I don't even want to mess with any BW R3 internal tables and that is why I would like to go from ODSD->Temp->ODSD. I can get the downtime to do it too.
Thanks for your help though the issue still sin't solved. And I'd like to see your book sometime.
Vince

I'm looking for some inspiration here on how best to set up my TC

Copied from a post else where, any help greatly appreciated!!
I'm looking for some inspiration here on how best to set up my TC for my needs & wondering how others do for similar needs....
I have a 2TB TC that I have set up so that all of mine & my girlfriends photo's, music, movies & documents are on the one location so that we can access it wirelessly from both our MacBooks & also from a MacMini which I'm going to buy in a month or 2. Changing the location for where iTunes & iPhoto look wasn't a problem but browsing through iPhoto in particular is really slow due to the number of previews I presume, and also we are now unable to have any of the media with us when traveling about, synching phones on the move is a disaster as well!
Anyway,
is there an easy way of setting up iTunes / iPhoto so that we can have all the data on the TC managed on the MacMini but import small iTunes Playlists & iPhoto Albums to our MacBooks without having to change in preferences where the applications look for data each time we get home?
Any help anybody can offer would be grand!
Thanks in advance.........

You topic might be better suited for the iPhoto or iTunes forums, since your question seems to be with the application(s) functionality, not really the Time Capsules. However, if you start iPhoto or iTunes while holding down on the "option/alt" key, you can manually select a library to access. When you want one of your computers to access the library on the Time Capsule, make sure it's mounted as a shared volume on your Desktop and then open iTunes and point it towards the library on the Time Capsule. If you want to use a smaller library on your computer, open iTunes and point it to the library on your Mac. I've never switched back and forth multiple times between multiple libraries, so you might check in the iPhoto or iTunes forums to see if any issues may arise from doing this repeatedly.
-Doug

Looking for some advice regarding an image related program

Hi fellas, Im looking for some guidance here. I want to write a program that will read an image (image will be an xray image of a square), convert the image to black and white, and measure the length and width of the square. Im looking for the best progamming langauge to make this happen. Anyone have any recommendations? I know c++ has a good imaging library that would be helpful so im looking into that at the moment. And Im pretty sure I can do this with matlab, but Im writing this program for a doctor so I need it to be portable. Thanks in advance for all the help
Cliffnotes:
Whats the best programming language to:
-read an image (of a square)
-convert image to black and white
-measure length/width of square
-GUI would be good but not necessary
-easy to write

HashBox wrote:You might want to look in to DPI and what The GIMP does in terms of that, also I found this which might be of use as well: http://en.wikipedia.org/wiki/Pixels_per_inch
Thanks HashBox, I think Im off to a good start on this. First, I wrote the program (majority of it) using matlab, and now Im trying to convert it to C++. So far I have:
#include <stdio.h>
#include "CImg.h"
using namespace cimg_library;
//main program
int main()
CImg<double> img("xray.jpg");
//converts the image to black and white
img.RGBtoYCbCr().channel(0).resize(-100,-100,1,3).RGBtoLUT(CImg<>(2,1,1,3).fill(0.0f,255.0f),false);
//displays image
CImgDisplay display(img,"Black and White");
while (!display.is_closed)
display.wait();
return 0;
So right now, I have the black and white xray image. How do I find out the size of the image using c++? Is there a function for that or do I have to write code to find it manually?
Heres the original matlab code I wrote that Im trying to write my c++ code after:
%read the image
[filename,pathname] = uigetfile('*.*', 'Select an image');
%assign image to film
film=imread(filename);
%threshold the image
level = graythresh(film);
%convert image to black&white using the thresholded value
BW = im2bw(film, level);
%display image
imshow(BW);
SIZE=size(BW);
counter=zeros(1, SIZE(1));
for x=1:SIZE(1)
for y=1:SIZE(2)
if (BW(x,y)==1)
counter(1,x)=counter(1,x)+1;
end
end
end
SUM=0;
lines=0;
for counterarray=1:SIZE(1)
if counter(1,counterarray)>0
lines=lines+1;
SUM=counter(1,counterarray)+SUM;
end
end
Last edited by wankel (2009-04-24 21:15:46)

Best Practices regarding AIA and CDP extensions

Based on the guide "AD CS Step by Step Guide: Two Tier PKI Hierarchy Deployment", I'll have both
internal and external users (with a CDP in the DMZ) so I have a few questions regarding the configuration of AIA/CDP.
From here: http://technet.microsoft.com/en-us/library/cc780454(v=ws.10).aspx
A root CA certificate should have an empty CRL distribution point because the CRL distribution point is defined by the certificate issuer. Since the roots certificate issuer is the root CA, there is no value in including a CRL distribution point for
the root CA. In addition, some applications may detect an invalid certificate chain if the root certificate has a CRL distribution point extension set.A root CA certificate should have an empty CRL distribution point because the CRL distribution point is defined
by the certificate issuer.
To have an empty CDP do I have to add these lines to the CAPolicy.inf of the Offline Root CA:
[CRLDistributionPoint]
Empty = true
What about the AIA? Should it be empty for the root CA?
Using only HTTP CDPs seems to be the best practice, but what about the AIA? Should I only use HTTP?
Since I'll be using only HTTP CDPs, should I use LDAP Publishing? What is the benefit of using it and what is the best practice regarding this?
If I don't want to use LDAP Publishing, should I omit the commands: certutil -f -dspublish "A:\CA01_Fabrikam Root CA.crt" RootCA / certutil -f -dspublish "A:\Fabrikam Root
CA.crl" CA01
Thank you,

Is there any reason why you specified a '2' for the HTTP CDP ("2:http://pki.fabrikam.com/CertEnroll/%1_%3%4.crt"
)? This will be my only CDP/AIA extension, so isn't it supposed to be '1' in priority?
I tested the setup of the offline Root CA but after the installation, the AIA/CDP Extensions were already pre-populated with the default URLs. I removed all of them:
The Root Certificate and CRL were already created after ADCS installation in C:\Windows\System32\CertSrv\CertEnroll\ with the default naming convention including the server name (%1_%3%4.crt).
I guess I could renamed it without impact? If someday I have to revoke the Root CA certificate or the certificate has expired, how will I update the Root CRL since I have no CDP?
Based on this guide: http://social.technet.microsoft.com/wiki/contents/articles/15037.ad-cs-step-by-step-guide-two-tier-pki-hierarchy-deployment.aspx,
the Root certificate and CRL is publish in Active Directory:
certutil -f -dspublish "A:\CA01_Fabrikam Root CA.crt" RootCA
certutil -f -dspublish "A:\Fabrikam Root CA.crl" CA01
Is it really necessary to publish the Root CRL in my case?
Instead of using dspublish, isn't it better to deploy the certificates (Root/Intermediate) through GPO, like in the Default Domain Policy?

Business Package for SAP Best Practices for Enterprise Portal

Hi,
We are implementing EP for ECC 5.0 and we have to web enable some FI transactions like FB50/fb60 etc. We want to use standard business package for this. The only business package that caters this requirement is "Business Package for SAP Best Practices for Enterprise Portal 60.1". When i checked the data source for this business package, the specification is for "SAP R/3 4.6B and above". Does this work for ECC 5.0 as well? In general does the R/3 specific business packages work for ECC versions? Please let me know. Thanks for the help. I promise rewards.
Regards
Hari

Hari,
When you download the BPO via Portal Content Portfolio,
each bpo has additional information on the release.
For example for the one you are inquiring about - Business Package for SAP Best Practices for Enterprise Portal, the additional release information is provided on the following links;
https://www2.iviewstudio.com/sdn/info/index.cfm?action=faqs&part=#QSR03
https://www2.iviewstudio.com/sdn/detail_view/index.cfm?action=package_information&CatalogSet=SAP%20Content&ItemID=17212&CFID=7544845&CFTOKEN=99283970
Regards,
James

Looking for some help in creating an ItemFilter for a Targeter

Looking for some help in creating an ItemFilter for a Targeter
Need a examples for creating itemfilter and TargeterFirst

Hi David,
We can integrate Syncfusion with LightSwitch application, if you want to customize column when create a report using syncfusion reportviewer, since I didn't try this third party
extension before, I think you could consider getting help from
syncfusion forum, more syncfusion experts can help you on this issue.
Thanks for your understanding.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Looking for some good documents on performance tunning

Hi,
please excuse me, as this is not a technical issue.as i am looking for some good ebooks ,can anybody suggest me some good site from where i can download free. or any metalink number.
Message was edited by:
user00726

Hi,
Its great to chat with you.. !!
Really, I am impressed with the things what you have written.
We are very lucky that such type of Great Person is in ORACLE World.
As I am eagerly searching for "Practical Oracle8i(TM): Building Efficient Databases " an Hard Copy to read. But, its very hard to find it.
I had seen Amazon for $44.20, In Our Currency its too high Almost 2000/-
Can you share with us alteast an PDF Copy of that book.
It's a request. from my side. and I will be very thankful to you.
I am searching nearly from past 3 Months.
Can you write some Book on RAC. I am searching for Good one...
Thanks & Regards,
Pavan Kumar N

Looking for some best practice regarding Content Administrator access

Similar Messages

Maybe you are looking for