Looking for some creative friends and level advertisement

Im posting here to tell you guys that i need some friends that are mature and good at making levels, i have made a bunce a levels and 3 of them are fairley good. Also if anyone wants to play or look at them, here they are.
http://lbp.me/u/Moldy_Maggots/levels?p=1&l=12

craigatadobe12345 wrote:
I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc.  I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
Does anyone know of a resource where I could find some guidance on this?
Self-Publishers Start Here: Planning Your Book
This site is mostly about self-publishing, but don't dismiss it until you've searched through its archives and followed its links to other resources. There's plenty of good stuff!
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Similar Messages

  • Looking for some good Arc and Circle drawing pdf code.

    Hi I am looking for some suggestions on how to draw circles and arcs using PDF. My arcs have recently started to be drawn as chords in Adobe Reader 9.1.1. I am looking for example code o this nature (I know this is not circle or arc code this is just an example):
    b
    0 0 0 RG 0 0 0 rg
    1 w 98 -156 m 104 -154 l 104 -158 l 0 0 0 RG 0 0 0 rg
    b
    0 0 0 RG 0 0 0 rg
    1 w 398 -156 m 392 -154 l 392 -158 l 0 0 0 RG 0 0 0 rg
    b
    0 0 0 RG 0 0 0 rg
    1 w 98 -156 m 396 -156 l S
    BT /F1 10 Tf 243 -151 Td (1.5") Tj ET
    1 w 398 -196 m 392 -194 l 392 -198 l 0 0 0 RG 0 0 0 rg
    b
    i.e. actual PDF tokens.
    If you know of a website that feature such examples I would appreciate the URL too.
    Thanks

    Jem,
    Pardon me if I sound rude by suggesting that before you launch into an expensive printing job (which could result in disastrous consequences if you don't do it right) that you actually learn how to use the program first. You may also want to learn something about the offset printing process and how to prepare print jobs.
    Even many Illustrator novices know that there is no such thing as a background in Illustrator, in the sense that there is in Photoshop. You will need to PLACE your Photoshop background as a high resolution CMYK tiff in the provided template. That's the answer to your second question. I don't really understand your first question. Maybe someone else will. Are you simply asking, "where do I begin?" If so, then you REALLY REALLY need to read a book on how to use Illustrator. The Adobe Illustrator Classroom in a Book might be the place to start.
    "I'm pretty good with CPR. I'm helping a friend do his vasectomy and I already have all the equipment (scalpels, thread, etc.) I'm just having trouble figuring out where to cut."

  • Looking for some creative guidelines for book formatting

    I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc.  I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
    Does anyone know of a resource where I could find some guidance on this?

    craigatadobe12345 wrote:
    I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc.  I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
    Does anyone know of a resource where I could find some guidance on this?
    Self-Publishers Start Here: Planning Your Book
    This site is mostly about self-publishing, but don't dismiss it until you've searched through its archives and followed its links to other resources. There's plenty of good stuff!
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • RE: Looking for some database statistics and wait event statistics

    Hi:
    We are using Oracle 10g RAC on Sun Solaris 5.9.
    1) In GV$SYSSTAT, we cannot find the following database statistics:
         'global cache converts',
         'global cache convert time',
         'global cache gets',
         'global cache get time',
         'global cache convert timeouts',
         'global cache defers'
    2) In GV$SYSTEM_EVENT, we cannot find the following wait event:
         'buffer busy global CR'
    For 1) and 2), could you please tell us where to retrieve the above information,
    or suggest a reasonable alternative?
    Have these stats been removed in Oracle 10g?
    Have they been renamed? To what?
    3) We currently compute the number of additional redo logs that can be accommodated in the free space of the archive directory using the formula:
    (arhive directory free space / redo log file size)
    However, using ASM we find that the free space for a ASM diskgroup is being reported as zero in the table v$asm_diskgroup if the diskgroup is mounted manually. How would one go about retrieving the free space for a logical volume?
    Thanks

    Hi:
    We are using Oracle 10g RAC on Sun Solaris 5.9.
    1) In GV$SYSSTAT, we cannot find the following database statistics:
         'global cache converts',
         'global cache convert time',
         'global cache gets',
         'global cache get time',
         'global cache convert timeouts',
         'global cache defers'
    2) In GV$SYSTEM_EVENT, we cannot find the following wait event:
         'buffer busy global CR'
    For 1) and 2), could you please tell us where to retrieve the above information,
    or suggest a reasonable alternative?
    Have these stats been removed in Oracle 10g?
    Have they been renamed? To what?
    3) We currently compute the number of additional redo logs that can be accommodated in the free space of the archive directory using the formula:
    (arhive directory free space / redo log file size)
    However, using ASM we find that the free space for a ASM diskgroup is being reported as zero in the table v$asm_diskgroup if the diskgroup is mounted manually. How would one go about retrieving the free space for a logical volume?
    Thanks

  • I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

    I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling.  I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working.  I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem. 
    My network consists of 4  base stations set up in a roaming network - same network name and passwords.  I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn.  The network works pretty well since I went to a roaming set up.  Good performance, yata, yata, yata.
    However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address.  When the AEBS is set to  bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding. 
    I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS.  I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS.  In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding.  However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode. 
    I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope.  What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
    I'd appreciate any insight into this that anyone might have.  I've hit the wall with what I know.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • Looking for some info, Creative is not much help.

    Looking for some info, Creative is not much help. Ok, right now I have an Audigy 2 ZS Platinum. It can use the digital inputs to decode either Dolby Digital, DD EX, DTS, and DTS ES to the analog speaker outputs. (Also a 5. setup.)
    I recently built a new PC, and would like to replace the sound card, but I use that feature (as well as some others). Seeing how Creative doesn't want to easily display the capabilities of there cards, I would like someone to let me know what card will allow the fallowing in Windows XP, Vista, and theoretically Windows 7.
    Hardware decoding of Dolby Digital, DD EX, DTS, and DTS ES and allow a proper 5. playback through analog speakers.
    Recording of whatever is playing out of the the speakers. The recording selection is labeled "What U Hear")
    The reasons behind me wanting to buy a new card are simply that I would prefer to run it through PCI-Express, and have full compatibility at the release of Windows 7 without any loss of features I need. From what I can tell, if things work in Windows Vista they will work in [email protected]

    All I can say to you (someone correct me if I'm wrong) is that Xtremegamer's doesn't decode DD/DTS via hardware with official drivers (altough they're capable of - all X-Fi are capable of decoding). XtremeMusic does the job with official drivers. I don't know the rest of the models. Someone adds [email protected]

  • Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

    Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
    so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
    I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
    Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
    It think it gives this error message when i reach 24% everytime during export.
    So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
    anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
    Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
    Taphabit

    boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
    NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
    OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
    is there any way of preemptively avoiding it in future projects?
    thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

  • Looking for some VPN advice on c7200 and possible serious problem

    Hi all,
    I am looking for some advice on how to figure out few things.
    customer has a c7200 with VPN module and seen the following
    15.2(4)M4, RELEASE SOFTWARE (fc2)
    Vpn7# Show crypto isakmp sa
    Exemple: x.x.x.x  y.y.y.y QM_IDLE 14020 ACTIVE ( repeated around 700 times)
    Vpn7# IKE-Session : 2517 active, 5120 max, 3169 failed
    Hardware Encryption : ACTIVE
    Number of hardware crypto engines = 1
    CryptoEngine VAM2+:7 details: state = Active
    Capability : IPPCP, DES, 3DES, AES, RSA, IPv6, FAILCLOSE, HA
    IKE-Session : 2800 active, 5120 max, 3169 failed
    DH : 55 active, 5120 max, 0 failed
    IPSec-Session : 1628 active, 10230 max, 0 failedhe would like to know whether these messages allude to some kind of serious problem or show the normal operation of vpn routers. because they need  to analyse their business related incidents and do prevent actions
    therefore if someone could give  give me some advice if there is any problem with the hardware i would greatly appreciate it
    thanks in advance
    Lance

    I'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
    And how do you find a good marketer?
    I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
    Good luck!

  • Looking for some advice on CEP HA and Coherence cache

    We are looking for some advice or recommendation on CEP architecture.
    We need to build a CEP application that conforms to the following:
    • HA with no loss of events or duplicate events when failing over to the backup server.
    • We have some aggregative rules that needs to see all events.
    • Events are XMLs with size of 3KB-50KB. Not all elements are needed for the rules but they are there for other systems that come after the CEP (the customer services).
    • The XML elements that the CEP needs are in varying depth in the XML.
    Running the EPN on a single thread is not fast enough for the required throughput mainly because network latency to the JMS and the heavy task of parsing of the XML. Because of that we are looking for a solution that will read the messages from the JMS in parallel (multi thread) but will keep the same order of events between the Primary and Secondary CEPs.
    One idea that came to our minds is to use Coherence cache in the following way:
    • On the CEP inbound use a distributed queue and not topic (at the CEP outbound it is still topic).
    • On the CEPs side use a Coherence cache that runs on the CEPs JVMs (since we already have a Coherence cluster for HA).
    • Both CEPs read from the queue using multi threading (10 reading threads – total of 20 threads) and putting it to the Coherence cache.
    • The Coherence cache is publishing the events to both CEPs on a single thread.
    The EPN looks something like this:
    JMS adapter (multi threaded) -> replicated cache on both CEPs -> event bean -> HA adapter -> channel -> processor -> ….
    Does this sounds sound to you?
    Are we over shooting here? Is there a simpler solution for our needs?
    Is there a best practice for such requirements?
    Thanks

    Hi,
    Just to make it clear:
    We do not parse the XML on the event bean after the Coherence. We do it on the JMS adapter on multiple threads in order to utilize all the server resources (CPUs) and then we put it in the replicated cache.
    The requirements from our application are:
    - There is an aggregative query that needs to "see" all events (this means that we need to pass all events thru a single processor and we cannot partition them to several processors).
    - Because this is a HA solution the events on both CEPs (primary and secondary) needs to be at the same order when reaching the HA inbound adapter and the processor.
    - A single thread JMS adapter is not reading the messages from the JMS fast enough mainly because it takes time to parse the XML to an event.
    - Using a multi-threaded adapter or many single threaded adapters with message selector will create a situation that the order of events on both CEPs will not be the same at the processor inbound.
    This is why we needed a mediator so we can read in multiple threads that will parse the XMLs in parallel without concerning on order of messages and on the other hand publish all the messages on a single thread to the processors on both CEPs from this shared mediator (we use a replicated cache that runs on both JVMs).
    We use queue instead of topic because if we read the messages from a topic on both CEPs it will be stored twice on the Coherence replicated cache. But if we use a queue, when server 1 read the message and put it in the Coherence replicated cache then server 2 will not read it because it was removed from the queue.
    If I understand correctly you are suggesting replacing the JMS adapter with an event bean that will read the messages from the JMS directly?
    Are you also suggesting that we will not use a replicated cache but instead a stand alone cache on each server? In this case how do we keep the same order of events on both CEPs (on both caches)?

  • I have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

    i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??

    Hi
    Did You ever use - iPhoto ?
    Did You may be direct iPhoto to a different Photo Library
    As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
    Do - When no other program is running that might interfere
    • Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
    • Now iPhoto let's You select Photo Library
    • Select the one in Your Account / Home folder / Pictures ! !
    • Then iPhoto should start up OK
    • Now Quit iPhoto
    • START iMovie
    Does it still hangs - then I would suspect - iMovie Pref. file
    If it Run's OK - Then HURRAY !
    Yours Bengt W

  • When I add tunes from a CD into iTunes on myMacPro, shouldn't I be able to see them on my iPad and iPhone if I've got iCloud?  For some reason I thought the advertisement on TV said "add music here, and see it there.."  was that just photos?

    when I add tunes from a CD into iTunes on myMacPro, shouldn't I be able to see them on my iPad and iPhone if I've got iCloud? For some reason I thought the advertisement on TV said "add music here, and see it there.."  or was that just photos?

    Oh, wait -- also, you took about uploading CDs. I don't think *those* would automatically go to your other devices *until* you subscribe to iMatch or whatever that's called. You have to pay an extra $25 a year to get all your uploaded stuff in the cloud and therefore on your other devices. Anything you *purchase* from iTunes on one device would automatically be sent to the other devices.
    I did the Match thing, and it took a while at first to upload all the non-iTunes stuff, but then it worked. The whole thing is still new and has some kinks to work out.

  • I had a friend airdrop a video to me last week from her iPhone and I saw it on my iPhone after the upload was complete. I'm looking for the video now and can't find it anywhere on my phone. Where is it and/or is it stored on my phone?

    I had a friend airdrop a video to me last week from her iPhone and I saw it on my iPhone after the upload was complete. I'm looking for the video now and can't find it anywhere on my phone. Where is it and/or is it stored on my phone?

    I airdropped the video again and it now shows up in my camera roll.

  • Looking for some LBP 3 friends

    I have all 3 LBP games on PS3. I'm looking for some mature people to play with. I'll say up front I'm not real good. I've tried playing randomally online and always seem to end up with people who grab my character and push him off the edge. Please don't reply if that's you. Thanks,Pat

    Throw my hat into the ring. Need some folks who are mature and serious about creating and sharing stuff. Also looking for folks to get through those multiplayer areas for more prize bubbles. Shonuff-X  on the PS4 version of LBP3. Just let me know where your from.

  • HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphone will download and my ipad but nothing from my computer. any help would be great.

    HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphod will not  download and my ipad  any help would be great.

    A lot of people are experiencing it, which suggests that Apple is having issues. If that is the case all people can do is wait it out.

  • Looking for some advice.

    Hi. Hope this is right forum. First post. A brief background. Years ago (2007-2008) I created a web portfolio for school. First it was in HTML (Dreamweaver) and then Flash. I hadn't really touched it in years and decided this past couple of months, after playing in the medium again, to get back into wed design, 3d, and digital content creation. That said, I went in and updated both the HTML and Flash versions with the knowledge I currently have, limited though it is. I now would like to go forward and build a completely new site and teach myself HTML, JavaScript, and WebGL along the way (possibly before hand). Hopefully I'll get working on the new site before the end of the year. In the mean time, I'm using my old site as a stop-gap measure. I've also taken books out from the library to begin journey into the above mentioned languages.
    This all said, I'm looking for some advice on what direction I should go next...look into... Does my current objective seem reasonable? Also, could anyone give feedback on what I did wrong and what I've done right on my old site. I think, as far as what went wrong, the Flash page is just too large. No one wants to wait so long for it to load. I think I got carried away with it. Also, too many sound effects. That said, I think the HTML site was constructed in an "old-fashion" way. No one makes sites like that anymore. I basically set it up in Photoshop, sliced it, and assembled it in Dreamweaver. The end result is a bunch of tables in HTML? A friend suggested I look into a CMS (?) like WordPress?
    Here's my current site: http://www.personal.kent.edu/~mstingle/
    Constructive feedback on what I did right and wrong would be great. And, where I should be looking next for rebuild of my portfolio.
    Cheers.

    WebGL is still  experimental.  Most browsers don't fully support it yet.
    http://caniuse.com/webgl
    The current trend is Responsive Web Design -- layouts that work in all devices (mobile, tablet and desktop).  This technology relies on CSS layouts (no tables) with media queries for different viewport widths.  Below is a crude example built with the FluidGrid Layouts feature in DW CS6 or CC:
    http://alt-web.com/FluidGrid/Fluid2.html  -- resize your browser's viewport to see it in action.
    Flash is dead on the web now because the world's most popular mobile & tablet devices don't support it.  Animations are mostly being built with HTML5, CSS3 and JavaScript.  See Adobe Edge Animate.
    If you're not a skilled coder and just want a basic static web site, Adobe Muse might be all you need.  http://www.adobe.com/products/muse.html   That said, Muse cannot support server-side programming so you can't use it for advanced features like CMSs, blogs, etc...
    If you're a Creative Cloud member, you can use Behance & ProSite to build & share your portfolio online.
    http://www.adobe.com/products/creativecloud/behance-community.html
    http://prosite.com/
    In terms of your own site, ask yourself how much content & which features it will need to support in the coming months/years.  If it's going to be a relatively small site (under 20 pages), a static HTML site is probably all you need.  IMO, WordPress -- a dynamic CMS built with PHP & MySql databases -- would be overkill.  However, if you plan to make your site into a  blog for example, then a dynamic CMS is an option to consider.  WordPress isn't the only kid on the block either.  There's also Drupal, Joomla!, and many more...
    Nancy O.

Maybe you are looking for