Looking for some guidance on how to splice 2 vidoes together in Adobe Elements 13.
Looking for some guidance on how to splice 2 vidoes together in Adobe Elements 13.
ScottWarnerBC
What computer operating system is your Premiere Elements 13 running on?
What do you mean by splice 2 videos together?
a. put them side by side on the Timeline and export them to one file saved to the computer hard drive or burned to disc
or
b. something like the following even before import into any Premiere Elements project
ATR Premiere Elements Troubleshooting: PE12: Seamless File Merging Before Import
If it is "a", then we need to know the properties of those 2 files so that the project settings can be set accordingly.
What is your intended export? Based on the properties of the source media, we can then decide on export settings
to produce a file with properties as close as possible to the source (if that is what you want).
We will be watching for further information.
Thanks.
ATR
Similar Messages
-
If anyone can help me, that would be hugely appreciated!
I have the same issue now after downgrading my Flash plugin. I downgraded from 10 to 9 latest because I like using Camino and for some reason Flash 10 doesn't play nice with Camino. But all of a sudden as I use Camino 2b2 for everyday and Safari 3.2 for banking and such, the browser hangs requiring a forced quit when I close it. I've re-installed the browser twice now with all the previous folders, and preferences erased and caches emptied. I even when to re-installing 10.5.6 and it still crashes, it's odd. Maybe 10.5.7 will address this.
-
Looking for some guidance on an Internet and Wan failover design
Hey Everyone,
I have a project that has been somewhat dropped my lap. The person who was going to do the project has abruptly bowed out. I'm stuck in a position where I can either find another contractor, or just do the work myself. For sake of saving my company, and putting another notch in my belt, I think I'm just going to do it myself. For background info, I am a CCIE Collaboration. I have held a CCNA in route switch for several years, and have used it extensively. I have done some pretty large networking projects. But I've never done this particular aspect of route switch. I'm hoping someone here can point me to a good location for reference materials or videos.
Here is what I'm looking to do. We have 30 branch offices, with 2 major data centers. Both data centers have a 100mg internet, and a 50mg mpls connection. Today our MPLS comes directly in to a Cisco 3945 router and then uplinks in to our datcenter on a 3750 stacked switch. Our internet connection comes in to a HA pair of ASA 5510's and then also uplinks to our switches. All of our branches come back to the datacenters over the MPLS for their internet services. Today, all of our offices go to our west coast datacenter. The only thing using our east coast datacenters internet is that office itself. I want to achieve two goals:
1) Make all internet connectivity load balance. If one site loses internet, all traffic routes to the other site.
2) If the MPLS is lost, I want the datacenters to reroute traffic through a VPN tunnel between each other
The way I understood it from the person who left the project is that I need to bring the internet connection and the MPLS in to a single router, or pair of clustered routers. That router can then make the patch selection and handle the BGP with our carrier.
Thank you all in advance.I acually have similar setup at home using a 2611 router and forwarding port ranges to multiple ips on the internal network and it works great! My issue is that I have one dynamic ip assigned by my ISP and eventually I will have to manually change the ip for each nat statement. I wanted to know if there is a way to point to the outside interface instead of using on ip address. I found out that you can use a static nat statment
"ip nat inside source static tcp 10.0.0.2 22 interface fa0/0 22" instead of
"ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable"
but I cannot find how to point my route-map to the interface to fully resolve this dynamic ip change in the future. My config is listed below which works great if you have static ips assigned by your ISP!!! Though I would love some guidance on the dynamic issue if possible. Thanks
~Roman
P.S. ip nat statements work like numbered access lists and have to be in order or it will not work. I found out the hard way!.
interface fa0/0
ip nat outside
interface fa0/1
ip nat inside
interface s1/0
ip nat inside
ip nat inside source list 1 interface fa0/0 overload
ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable
ip nat inside source static 192.168.1.3 72.xxx.xxx.85 route-map DESKTOP extendable
access-list 1 remark NAT OVERLOAD List
access-list 1 permit 10.0.0.0 0.255.255.255
access-list 1 permit 192.168.0.0 0.0.255.255
access-list 1 permit 172.16.0.0 0.15.255.255
access-list 100 remark Desktop computer port-forwarding
access-list 100 permit tcp host 192.168.1.3 3389 any
access-list 100 permit tcp host 192.168.1.3 28960 any
access-list 100 permit udp host 192.168.1.3 range 28960 32000 any
route-map DESKTOP permit 10
match ip address 100 -
Looking for some info on how to play music files on IPAD2
Hi and thanks for sharing. Trying to figure out how to play sound files such as wavs or mp3s on my ipad2 while I browse the internet or use my computer. I was trying to see if the music feature will play my songs or if I can import downloaded files from the net to itunes and if that will play in the background. I have an audio program that can send sound files to email and was trying to figure out how, similarly, to get this play in the background while I do things too. That and sound files downloaded from the internet. Do these go to iCloud when you download them? Can I import sounds into itunes with my iPad someway. (It's the only computer or device I own). Basically looking for a pathway to get music from my audio program that's sent to email, and clips I've DLed off sites on the internet, to play while I use the pad or browse the net. Thanks for your intel on the mission. Cheers!
The only way to get content into the Music app is via iTunes store downloads or syncing with itunes on a computer. You will need to find a third party media player such as VLC (whick integrates with DropBox and GoogleDrive, if that appeals to you).
-
Looking for some advice regarding an image related program
Hi fellas, Im looking for some guidance here. I want to write a program that will read an image (image will be an xray image of a square), convert the image to black and white, and measure the length and width of the square. Im looking for the best progamming langauge to make this happen. Anyone have any recommendations? I know c++ has a good imaging library that would be helpful so im looking into that at the moment. And Im pretty sure I can do this with matlab, but Im writing this program for a doctor so I need it to be portable. Thanks in advance for all the help
Cliffnotes:
Whats the best programming language to:
-read an image (of a square)
-convert image to black and white
-measure length/width of square
-GUI would be good but not necessary
-easy to writeHashBox wrote:You might want to look in to DPI and what The GIMP does in terms of that, also I found this which might be of use as well: http://en.wikipedia.org/wiki/Pixels_per_inch
Thanks HashBox, I think Im off to a good start on this. First, I wrote the program (majority of it) using matlab, and now Im trying to convert it to C++. So far I have:
#include <stdio.h>
#include "CImg.h"
using namespace cimg_library;
//main program
int main()
CImg<double> img("xray.jpg");
//converts the image to black and white
img.RGBtoYCbCr().channel(0).resize(-100,-100,1,3).RGBtoLUT(CImg<>(2,1,1,3).fill(0.0f,255.0f),false);
//displays image
CImgDisplay display(img,"Black and White");
while (!display.is_closed)
display.wait();
return 0;
So right now, I have the black and white xray image. How do I find out the size of the image using c++? Is there a function for that or do I have to write code to find it manually?
Heres the original matlab code I wrote that Im trying to write my c++ code after:
%read the image
[filename,pathname] = uigetfile('*.*', 'Select an image');
%assign image to film
film=imread(filename);
%threshold the image
level = graythresh(film);
%convert image to black&white using the thresholded value
BW = im2bw(film, level);
%display image
imshow(BW);
SIZE=size(BW);
counter=zeros(1, SIZE(1));
for x=1:SIZE(1)
for y=1:SIZE(2)
if (BW(x,y)==1)
counter(1,x)=counter(1,x)+1;
end
end
end
SUM=0;
lines=0;
for counterarray=1:SIZE(1)
if counter(1,counterarray)>0
lines=lines+1;
SUM=counter(1,counterarray)+SUM;
end
end
Last edited by wankel (2009-04-24 21:15:46) -
Looking for some VPN advice on c7200 and possible serious problem
Hi all,
I am looking for some advice on how to figure out few things.
customer has a c7200 with VPN module and seen the following
15.2(4)M4, RELEASE SOFTWARE (fc2)
Vpn7# Show crypto isakmp sa
Exemple: x.x.x.x y.y.y.y QM_IDLE 14020 ACTIVE ( repeated around 700 times)
Vpn7# IKE-Session : 2517 active, 5120 max, 3169 failed
Hardware Encryption : ACTIVE
Number of hardware crypto engines = 1
CryptoEngine VAM2+:7 details: state = Active
Capability : IPPCP, DES, 3DES, AES, RSA, IPv6, FAILCLOSE, HA
IKE-Session : 2800 active, 5120 max, 3169 failed
DH : 55 active, 5120 max, 0 failed
IPSec-Session : 1628 active, 10230 max, 0 failedhe would like to know whether these messages allude to some kind of serious problem or show the normal operation of vpn routers. because they need to analyse their business related incidents and do prevent actions
therefore if someone could give give me some advice if there is any problem with the hardware i would greatly appreciate it
thanks in advance
LanceI'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
And how do you find a good marketer?
I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
Good luck! -
Looking for some good Arc and Circle drawing pdf code.
Hi I am looking for some suggestions on how to draw circles and arcs using PDF. My arcs have recently started to be drawn as chords in Adobe Reader 9.1.1. I am looking for example code o this nature (I know this is not circle or arc code this is just an example):
b
0 0 0 RG 0 0 0 rg
1 w 98 -156 m 104 -154 l 104 -158 l 0 0 0 RG 0 0 0 rg
b
0 0 0 RG 0 0 0 rg
1 w 398 -156 m 392 -154 l 392 -158 l 0 0 0 RG 0 0 0 rg
b
0 0 0 RG 0 0 0 rg
1 w 98 -156 m 396 -156 l S
BT /F1 10 Tf 243 -151 Td (1.5") Tj ET
1 w 398 -196 m 392 -194 l 392 -198 l 0 0 0 RG 0 0 0 rg
b
i.e. actual PDF tokens.
If you know of a website that feature such examples I would appreciate the URL too.
ThanksJem,
Pardon me if I sound rude by suggesting that before you launch into an expensive printing job (which could result in disastrous consequences if you don't do it right) that you actually learn how to use the program first. You may also want to learn something about the offset printing process and how to prepare print jobs.
Even many Illustrator novices know that there is no such thing as a background in Illustrator, in the sense that there is in Photoshop. You will need to PLACE your Photoshop background as a high resolution CMYK tiff in the provided template. That's the answer to your second question. I don't really understand your first question. Maybe someone else will. Are you simply asking, "where do I begin?" If so, then you REALLY REALLY need to read a book on how to use Illustrator. The Adobe Illustrator Classroom in a Book might be the place to start.
"I'm pretty good with CPR. I'm helping a friend do his vasectomy and I already have all the equipment (scalpels, thread, etc.) I'm just having trouble figuring out where to cut." -
Looking for some RAW + JPEG Workflow suggestions
I'm looking for some suggestions on how best to organize my workflow now that I've started shooting with RAW +JPEG. I previously shot only in RAW, but the time spent in post-production was killing me. I've realized that for 95% of my shots that already have the correct exposure, white balance, etc, a JPEG photo is really all I need and saves me a ton of time. I've become convinced that editing every single photo from a shoot in RAW is overkill. I want to have the RAW versions, however, to rescue that occasional great shot where I unfortunately miffed the settings.
Through reading other posts here and experimenting, I've found that Aperture basically defulats to showing me only the imported RAW photos and that I need to click "New Version from Master JPEG" to see the JPEG version. This seems counterintuitive to the workflow I'd like to establish though. (i.e. I'm thinking it would be nice to see only the JPEG versions, and then only bring up the RAW version when the photo needs some serious correction).
I suppose I could highlight the entire batch of imported photos and select "New Version from Master JPEG" and then sort through each RAW/JPEG stack, but I'm still hoping there's a less cumbersome way. Anyone out there have any good workflow suggestions for this issue? I'm curious how other people out there deal with this issue in their workflow.
Thanks in advance!
Message was edited by: Nate CannonTry this - I do this as a matter of course:
-select all of the photos after importing them into a project
-create a new album from selection/call it JPG
-with all of the images still selected create new version from master JPEG. all of these should now be the album pick
-close all stacks, the JPEG will be the one showing up on top for that album.
RB
More here: [Aperture RAW+JPG|http://photo.rwboyer.com/2009/01/14/aperture-2-quick-tip-shooting-rawjp g> -
I'm looking for some inspiration here on how best to set up my TC
Copied from a post else where, any help greatly appreciated!!
I'm looking for some inspiration here on how best to set up my TC for my needs & wondering how others do for similar needs....
I have a 2TB TC that I have set up so that all of mine & my girlfriends photo's, music, movies & documents are on the one location so that we can access it wirelessly from both our MacBooks & also from a MacMini which I'm going to buy in a month or 2. Changing the location for where iTunes & iPhoto look wasn't a problem but browsing through iPhoto in particular is really slow due to the number of previews I presume, and also we are now unable to have any of the media with us when traveling about, synching phones on the move is a disaster as well!
Anyway,
is there an easy way of setting up iTunes / iPhoto so that we can have all the data on the TC managed on the MacMini but import small iTunes Playlists & iPhoto Albums to our MacBooks without having to change in preferences where the applications look for data each time we get home?
Any help anybody can offer would be grand!
Thanks in advance.........You topic might be better suited for the iPhoto or iTunes forums, since your question seems to be with the application(s) functionality, not really the Time Capsules. However, if you start iPhoto or iTunes while holding down on the "option/alt" key, you can manually select a library to access. When you want one of your computers to access the library on the Time Capsule, make sure it's mounted as a shared volume on your Desktop and then open iTunes and point it towards the library on the Time Capsule. If you want to use a smaller library on your computer, open iTunes and point it to the library on your Mac. I've never switched back and forth multiple times between multiple libraries, so you might check in the iPhoto or iTunes forums to see if any issues may arise from doing this repeatedly.
-Doug -
i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??
Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W -
How the transactional replication work for simple recovery database (looking for some internal concept)
RahulThere seems to be a new myth going around recently. I’ve had at least three people tell me, in the last month, that SQL’s transactional replication requires the database to be in full recovery.
This is complete fabrication. Replication (SQL native replication, that is) can work with the databases in any of the recovery models.
Transactional replication does involve the transaction log, as that’s where it picks up changes from. The log reader scans over the transaction log looking for log records marked for replication, copies those to the distribution database and then marks them
as replicated. When the checkpoint (for simple recovery) or log backup (for full or bulk logged) occur, the log will only be truncated up to the oldest inactive, replicated transaction.
Because transactional replication has its own way of ensuring log records aren’t discarded before been picked up by the log reader, there’s no requirement for a specific recovery model.
Refer this link
http://sqlinthewild.co.za/index.php/2008/12/05/a-new-sql-myth/
--Prashanth -
Looking for some creative guidelines for book formatting
I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc. I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
Does anyone know of a resource where I could find some guidance on this?craigatadobe12345 wrote:
I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc. I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
Does anyone know of a resource where I could find some guidance on this?
Self-Publishers Start Here: Planning Your Book
This site is mostly about self-publishing, but don't dismiss it until you've searched through its archives and followed its links to other resources. There's plenty of good stuff!
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
Looking for some creative friends and level advertisement
Im posting here to tell you guys that i need some friends that are mature and good at making levels, i have made a bunce a levels and 3 of them are fairley good. Also if anyone wants to play or look at them, here they are.
http://lbp.me/u/Moldy_Maggots/levels?p=1&l=12craigatadobe12345 wrote:
I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc. I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
Does anyone know of a resource where I could find some guidance on this?
Self-Publishers Start Here: Planning Your Book
This site is mostly about self-publishing, but don't dismiss it until you've searched through its archives and followed its links to other resources. There's plenty of good stuff!
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
Looking for some assistancte in GUI_DOWNLOAD
Hi there,
See I have this exercise I have to do here. Basically I have to create a program that will download the contects of SBOOK to my pc. I have to use GUI_DOWNLOAD in this exercise. Also, the user will have to input the path and file name of the file to be downloaded to. I have place appropriate error message on the screen as well but I'm not sure how to do this.Being relatively new to this, I tried looking for some samples and this is what I came up so far.
REPORT ZISTANZS_TRNG_EX9C.
TABLES: SBOOK.
PARAMETERS: FILEINP(30) DEFAULT 'c:\TEMP\wee.txt' OBLIGATORY.
DATA: BEGIN OF ITAB OCCURS 100.
INCLUDE STRUCTURE SBOOK.
DATA: END OF ITAB.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = FILEINP
FILETYPE = 'ASC'
write_field_separator = 'X'
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
OTHERS = 3.
Unfortunately, it doesn't work though. It keeps saying that my FILENAME is not the same data type as FILEINP? I'm asking for some assistance in how this can be properly solved? Any help would be appreciated /Hi,
Please refer the code below:
* File download, uses older techniques but achieves a perfectly
* acceptable solution which also allows the user to append data to
* an existing file.
PARAMETERS: p_file like rlgrap-filename.
* Internal table to store export data
DATA: begin of it_excelfile occurs 0,
row(500) type c,
end of it_excelfile.
DATA: rc TYPE sy-ucomm,
ld_answer TYPE c.
CALL FUNCTION 'WS_QUERY'
EXPORTING
query = 'FE' "File Exist?
filename = p_file
IMPORTING
return = rc.
IF rc NE 0. "If File alread exists
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
* TITLEBAR = ' '
* DIAGNOSE_OBJECT = ' '
text_question = 'File Already exists!!'
text_button_1 = 'Replace'
* ICON_BUTTON_1 = ' '
text_button_2 = 'New name'
* ICON_BUTTON_2 = ' '
* DEFAULT_BUTTON = '1'
* DISPLAY_CANCEL_BUTTON = 'X'
* USERDEFINED_F1_HELP = ' '
* START_COLUMN = 25
* START_ROW = 6
* POPUP_TYPE =
IMPORTING
answer = ld_answer
* TABLES
* PARAMETER =
EXCEPTIONS
text_not_found = 1
OTHERS = 2.
* Option 1: Overwrite
IF ld_answer EQ '1'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = p_file "File Name
filetype = 'ASC'
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_excelfile "Data table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i003(zp) WITH
'There was an error during Excel file creation'(200).
exit. "Causes short dump if removed and excel document was open
ENDIF.
* Option 2: New name.
ELSEIF ld_answer EQ '2'.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
filename = p_file "File name
filetype = 'ASC' "File type
* col_select = 'X' "COL_SELECT
* col_selectmask = 'XXXXXXXXXXXXXXXXXXXXXXXXXX'
* "COL_SELECTMASK
filetype_no_show = 'X' "Show file type selection?
* IMPORTING
* act_filename = filename_dat
TABLES
data_tab = it_excelfile "Data table
* fieldnames =
EXCEPTIONS
file_open_error = 01
file_write_error = 02
invalid_filesize = 03
invalid_table_width = 04
invalid_type = 05
no_batch = 06
unknown_error = 07.
ENDIF.
ELSE. "File does not alread exist.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = p_file "File name
filetype = 'ASC' "File type
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_excelfile "Data table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i003(zp) WITH
'There was an error during Excel file creation'(200).
exit. "Causes short dump if removed and excel document was open
ENDIF.
ENDIF.
Thanks,
Sriram Ponna. -
Im looking for some assistance in configuring our wireles...
Im looking for some assistance in configuring our wireless router to allow remote connections into it.. and then from there access any of the 5 computers on our network. I dont have the model number with me now, but just want to know where to start....
Goal=== to allow me to access our remote locations network and access / vnc into our 5 terminals...
I just need to know how i can configure the router to allow outside connections and then from there connect to our other machines via VNC...
Any suggestions on where to start with this?in order to access the router remotely , you need to enable remote management on the router and to access the terminals using VNC .. you need to open the ports used by VNC ..
Maybe you are looking for
-
BAPI for updating tax code for purchase order..
Hi friends, I have one requirement to change tax code for multiple Purchase order but the thing is they should not go for release.So what should I prefer BDC or BAPI. I am thinking to implement it through BAPI, but I don't know what procedure to
-
PLEASE HELP!!! I had to re-load osx and iphoto 6. Before doing so I pulled my hard drive into an external drive so I would not loose any pics in i photo. When all was said and done everything came back except the last pics I loaded into I photo. I ha
-
How do i get to see and enable ann app I downloaded and its not seen in the extensions
I have an app that I downloaded that keeps track of my activities . and the icon is here I can see it , the the company that the app is from is telling me that i need to enable it . I went to pluggins and extensions to enable but its not their , . wh
-
When I try to open iTunes, the window opens but I cannot click any of the songs. It is frozen when I start it up and the only way to exit is through ctrl-alt-delete.
-
I have a single BATCH file and I want to write program to run in vie Java. Anybody can help me?