Looking for some VPN advice on c7200 and possible serious problem
Hi all,
I am looking for some advice on how to figure out few things.
customer has a c7200 with VPN module and seen the following
15.2(4)M4, RELEASE SOFTWARE (fc2)
Vpn7# Show crypto isakmp sa
Exemple: x.x.x.x y.y.y.y QM_IDLE 14020 ACTIVE ( repeated around 700 times)
Vpn7# IKE-Session : 2517 active, 5120 max, 3169 failed
Hardware Encryption : ACTIVE
Number of hardware crypto engines = 1
CryptoEngine VAM2+:7 details: state = Active
Capability : IPPCP, DES, 3DES, AES, RSA, IPv6, FAILCLOSE, HA
IKE-Session : 2800 active, 5120 max, 3169 failed
DH : 55 active, 5120 max, 0 failed
IPSec-Session : 1628 active, 10230 max, 0 failedhe would like to know whether these messages allude to some kind of serious problem or show the normal operation of vpn routers. because they need to analyse their business related incidents and do prevent actions
therefore if someone could give give me some advice if there is any problem with the hardware i would greatly appreciate it
thanks in advance
Lance
I'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
And how do you find a good marketer?
I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
Good luck!
Similar Messages
-
Looking for some helpful advice for a website idea I have
Hello,
For the past year, my company has had a contract for a tech device manufacturer to maintain a project benchmarking the prices, specs, user features, etc. of their products against their major competitiors. It is quite an in-depth comparison and contains more than 100 products. It is up to date with new product releases and will continue to remain current on the newest products. Anyway, the contract is almost up and I am thinking that the project could be more lucrative if I created a website with all the information I have gathered over the past year. My problem is that I have never created a website for profit. I have created a personal website and my company's website using a combination of CS5 DW, FW, and Flash. I know some html, php, mySQL, and flash, and am fairly comfortable with the CS5 software in general.
Like I mentioned, I am new to trying to make money off a website, but here are two potential ways I have though of to to do so:
1. Just throw all the information on the websites and offer access to all users for free and hope to gain advertising revenue from the manufacturers who have their products on my site.
or
2. Offer a sample of basic info on all of the products, but require a subscription for full access (maybe $199/year).
My target market will consist of the manufacturers themselves, IT professionals, and resellers of these products.
Im also wondering if I should make it Flash-based and very visually appealing or just in html.
I guess i'm just looking for an opinion on which path to choose and any advice in making this effort successful.
Thanks in advance!!
-DaveI'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
And how do you find a good marketer?
I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
Good luck! -
Looking for some guidance on an Internet and Wan failover design
Hey Everyone,
I have a project that has been somewhat dropped my lap. The person who was going to do the project has abruptly bowed out. I'm stuck in a position where I can either find another contractor, or just do the work myself. For sake of saving my company, and putting another notch in my belt, I think I'm just going to do it myself. For background info, I am a CCIE Collaboration. I have held a CCNA in route switch for several years, and have used it extensively. I have done some pretty large networking projects. But I've never done this particular aspect of route switch. I'm hoping someone here can point me to a good location for reference materials or videos.
Here is what I'm looking to do. We have 30 branch offices, with 2 major data centers. Both data centers have a 100mg internet, and a 50mg mpls connection. Today our MPLS comes directly in to a Cisco 3945 router and then uplinks in to our datcenter on a 3750 stacked switch. Our internet connection comes in to a HA pair of ASA 5510's and then also uplinks to our switches. All of our branches come back to the datacenters over the MPLS for their internet services. Today, all of our offices go to our west coast datacenter. The only thing using our east coast datacenters internet is that office itself. I want to achieve two goals:
1) Make all internet connectivity load balance. If one site loses internet, all traffic routes to the other site.
2) If the MPLS is lost, I want the datacenters to reroute traffic through a VPN tunnel between each other
The way I understood it from the person who left the project is that I need to bring the internet connection and the MPLS in to a single router, or pair of clustered routers. That router can then make the patch selection and handle the BGP with our carrier.
Thank you all in advance.I acually have similar setup at home using a 2611 router and forwarding port ranges to multiple ips on the internal network and it works great! My issue is that I have one dynamic ip assigned by my ISP and eventually I will have to manually change the ip for each nat statement. I wanted to know if there is a way to point to the outside interface instead of using on ip address. I found out that you can use a static nat statment
"ip nat inside source static tcp 10.0.0.2 22 interface fa0/0 22" instead of
"ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable"
but I cannot find how to point my route-map to the interface to fully resolve this dynamic ip change in the future. My config is listed below which works great if you have static ips assigned by your ISP!!! Though I would love some guidance on the dynamic issue if possible. Thanks
~Roman
P.S. ip nat statements work like numbered access lists and have to be in order or it will not work. I found out the hard way!.
interface fa0/0
ip nat outside
interface fa0/1
ip nat inside
interface s1/0
ip nat inside
ip nat inside source list 1 interface fa0/0 overload
ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable
ip nat inside source static 192.168.1.3 72.xxx.xxx.85 route-map DESKTOP extendable
access-list 1 remark NAT OVERLOAD List
access-list 1 permit 10.0.0.0 0.255.255.255
access-list 1 permit 192.168.0.0 0.0.255.255
access-list 1 permit 172.16.0.0 0.15.255.255
access-list 100 remark Desktop computer port-forwarding
access-list 100 permit tcp host 192.168.1.3 3389 any
access-list 100 permit tcp host 192.168.1.3 28960 any
access-list 100 permit udp host 192.168.1.3 range 28960 32000 any
route-map DESKTOP permit 10
match ip address 100 -
Looking for some workflow advice
I'm starting work on a project that has media coming from several different sources, and I'd like some workflow advice. I'm using the CS6 Production Premium suite on a Windows7 computer. My primary video source is a Canon XF-100 shooting 24/1080p MXF video, but I'll also be incorporating AVC-HD shots taken with a 60D, XA10, GoPro, and iPhone. So, here are my main questions:
1. Should I transcode or not? Most of the footage (at least 2/3rds or so) will be from the XF-100, which Premiere can edit natively. I'm inclined just to put the AVC-HD clips straight into an MXF-formatted project and let Premiere render them in the sequences as needed. But I'm also wondering if it would be better for overall quality and consistency to transcode everything into the same format before importing into the project and set the project to that format.
2. If I do transcode, what format? Should I just convert the AVC-HD stuff to MXF for use in an MXF-native project? Or should I convert everything to another format entirely?. If so, which one? (I'm thinking AVC-Intra 100 at 24/1080p, but I'm not sure.)
Any experienced sages out there want to offer their $0.02? Thanks in advance,
Stutranscoding will not produce any better quality. you can actually degrade the quality in most cases, unless transcoding to raw. transcoding is usually done for proxy editing to allow for faster editing, or compatibility, if the original file cannot be read by the editing application. premiere pro usually handles mixed formats well, just make sure to either create the sequence from a clip that matches the destination format or create a sequence manually and specify the format that will be used for export.
if you do need to transcode to get some files to read, the avid dnxhd codec is a popular choice as it takes very little cpu and gpu resources to read. it has several quality options you can choose from, but it is limited to 1080p. if you transcode for faster editing (proxy editing), use dnxhd 36 8bit, and relink to the originals when done to keep their quality. -
Looking for some help/advice on LabVIEW
Hello, I'm completely new to LabVIEW but have a project to do and was wondering if anyone could give me some help/advice/ideas.
I need to use LabVIEW to interface with a power meter (Agilent E4419B) via a GPIB cable. I have a GP10 card. I have the drivers from the NI website. Can anyone think of any other software/hardware I may require? Or any advice about the best way to go about this from experience?Yeah sorry I am being very vague!
Basically I am wondering how you actually go about setting up LabVIEW to communicate with the meter - is all I need a GPIB card and cable? How do the drivers actually work? Do I need to use any different commands to interact with the meter or do the drivers serve this purpose? -
Looking for some development advice...
Platform
Oracle Database Enterprise Edition, 10.2.0.4
Windows Server 2003 R2
Development Framework
Front-End is written in PHP which interfaces with Oracle packages.
Application Category
Data Mart / Ad-Hoc Reporting
Problem at Hand
I'm responsible for the development of the PL/SQL interface to a data mart. The application is used to present charts of various complexities to the end users. The database been designed using the snowflake / star schema design methodology. The design effectively has one fact table with approximately 5 dimensions.
Ideally I wanted to pre-compute all the necessary measures and store them in a materialized view (a.k.a. "summary tables") for very quick response time to the user, using the GROUPING SETS, and ROLLUP extensions to the GROUP BY clause. However, there is a requirement which allows a user to exclude fact records (based on particular dimension values). This means I cannot pre-compute the measures, unless I'm missing something.
I am open to options, but I feel my only way out is to generate the SQL dynamically and return a REF CURSOR to the client. Almost everything is subject to change as far as an SQL statement is concerned. The SELECT list depends on the report and the columns chosen. Same goes for joining dimensions to the fact table, as well as an expected dynamic WHERE clause.
If that is the case do any of you have lessons learned with taking this approach? My concerns are (in no particular order):
1. Modularity
2. Maintainability
3. Performance
With a dynamic SQL approach and no ability to pre-compute values performance may or may not become an issue as I can only index base objects.
Maintainability and modularity are my biggest concerns. I want to code in such a way that it at least has a fighting chance of being maintainable for me or any successor. Normally I would try and consolidate common functionality into re-usable modules, but this seems like a difficult approach in this scenario. The reason being that at some point later in time a change to one report may not happen on another and this 're-usable' module would have to be split up. On the other side of the coin I could develop each report without consideration for others. The problem with this approach is that if I have to make a change, it may affect more than one report and it leaves an opportunity for bugs to creep up.
Basically, just throwing this out to you all to see if there was something glaring I missed, any passed lessons learned, or if I have to trudge along with what I have now.
Thanks!user503699 wrote:
Centinul,
First, let me confess that I am not trying to come as an expert here, so apologies if some of this is irrelevent or wrong.
After reading your OP, I remembered my early days in IT. Basically, I started my career in IT as a front-end programmer,
developing customized applications. During those days, I have, more than often, seen demands, either from customer or
from so-called "project managers", about a DYNAMIC reporting systems which can be used in any way desired.
Now, the idea initially sounds very attractive and I used to be very much disappointed at that time that I did not have
skills to build such a reporting tool. Basically, some people demand it because they are used to doing all sorts of "magical"
things with tools like MS EXCEL or because they had heard of some commerical reporting product that does "amazing" things.When I use dynamic, it's kind of loose in definition. However, I am DEFINITELY trying to weed out the "need" versus "want" in terms of requirements :)
Long story short. Have you decided TO BUILD this reporting application AFTER carefully reviewing following things?
a) Expectations of customer/management from the reporting systemI'm trying my best to do that. Unfortunately the customers (unknowingly) like to participate in a rapid prototyping process which I dislike.
b) Based on expectations, the budget available (I know this might sound off the track but not so much in my experience)They are aware.
c) more importantly, are there no commercial products in market which you can just buy ? There can be 2 answers to this
question. Either there are no commercial products on market that can satisfy the requirement OR there are products
available but they are too "expensive". In either case, it would help a lot to keep all stakeholders aware of WHY & HOW
have you arrived at the decision of building a reporting system.I'm trying to explore all options that I can. However, it is not as easy as a client/server architecture. The customers are located in geographically different locations and hence they need this information via the Web. In addition I have unique constraints when it comes to purchasing other products, especially when it means getting a new vendor involved. In most cases it's easier to work with what we have.
I have taken a brief look at Oracle's OLAP / Analytic Workspace functionality, but I haven't been able to find a way to easily remove "branches" from the hierarchy and retrieve aggregate results from the next level up. I could be missing something though.
Now, some technical (finally :) ) questions.
1) You said you wanted to use materialized views in order to speed up the process of generating results. Does it mean you
expect to have millions (or billions) of records in your fact table and hence on-demand grouping or aggregating will not
meet reporting SLAs?Millions of records are expected to be there. However, the frequency of load is very low (as in once a year, twice a year) so I wanted to create materialized views to pre-compute all the aggregates I need to make access fast. However, if I can't even get a static SQL statement then this option is out the window.
2) Looking at the example that you have given, it seems (to me) there is no alternative but using dynamic SQL.That's what I was afraid of. If that is the case does anyone recommend any best practices?
3) Will the application not have any pre-defined reports ? Will the users be given free-hand to select any of the combination
of 5 dimensions? That sounds a bit too flexible but what do I know. :)All the reports are predefined dealing with usually no more than four dimensions at a time. One dimension will be displayed on the final report with the measures, and the others are typically used to filter out the final results. From a simplicity perspective I could assume there would be a selection for ALL filtering dimensions EVERY time which means I could have a STATIC JOIN clause. However, there is an equal possibility that the user WILL NOT filter upon any particular dimension and therefore I don't want to include a JOIN to another table that is not even being used as this may hamper performance.
However one of these filtering dimensions is very similar to the hierarchy example I gave in a previous post. This is where a user wants to be able to exclude "branches" of a dimension but obtain aggregates at a higher level.
Another requirement is that some of the aggregates are sums, averages, regressions of individual measures. Therefore another layer of complexity is introduced which needs to manage a dynamic SELECT list.
4) Most importantly, how much maintenance window will be available to load data in this DWH? Does the reporting system
SLAs exclude this maintenance window or is reporting system expected to be available 24x7?See #1
That's probably all I can think of at this stage but this thread is interesting. I will keep an eye on this to see what you decide
finally and what was your thought processThanks for taking an interest and I hope it makes sense. -
Looking for some information/advice
To all, I am a oracle forms developer in the Phila, Pa area. Over the last couple of years
I have seen a drop off in the number of oracle forms jobs. Can anybody shed some light on this? I do have experience in other oracle tools such as pl/sql, sql*plus, sqlloader and oracle reports. I would like to stay in oracle. What are the up and coming oracle technologies I should be looking at? Should I be looking at the oracle industry
applications?( I have experience in Oracle financials older version) What other areas
would be good for me to go into?
What blogs should I be reading and what user groups should I be attending?
Thank
You
Jerome Greene Oracle Developer AnalystOracle says it is committed to the long-term support of Forms as long as customers continue to use it.
However it is, as you have observed, a situation where customers are moving to other technologies.
If you are committed to front-end development it is time to take Java classes and begin working with JDeveloper. If not your skill set will adapt more readily to PL/SQL programming and database development. -
Looking for some help / advice (kind of long)
I will try to keep a long story short, but basically I am having multiple problems trying to install Leopard.
I purchased the family pack knowing that I would install Leopard on two of my computers. The first is a PowerBook G4, and the other is a MacBook.
I was installing OSX on the MacBook and had to shut the computer down during the installation. After that I could not get the DVD out of the drive and the OS would not start. I got the DVD to eject with some encouragement with a paperclip, but I think I ruined the DVD. I erased the drive via target mode and basically have a fresh computer.
The other computer has a fresh HD and currently has 10.4 installed.
I did create a disk image of the 10.5 DVD prior to losing anything.
I am now stuck with two computers and cannot get Leopard on either one. I am now trying to figure out how to get Leopard onto either one. I cannot get either one to install via the DVD (it's slightly scratched up due to my impatience) but I can read the DVD and view its contents on the PowerBook.
I do not have a DL DVD to burn the disk image onto, but I do have a SL DVD but I am not sure if I can cut X Tools off of the Install DVD and still install the OS (assuming there is enough space).
I do have a USB HD and have tried to install through that but I cannot seem to get it to work. The USB drive has all of my information on it and I can't wipe it to install 10.5 onto it.
I am very, very limited to the resources I currently have (working on a project in India) but I am fairly knowledgeable with Mac's.
I can't quite figure out what to try next and I am more than open to suggestions. Sorry this is kind of long winded I just wanted to make sure I got all the details.
ThanksDepending on your resources available and your need/hurry to install it, there are possible solutions.
First, try and see if the disk (and drive) still works - in which case, no problem - install from there (let it do the disk self test which might take an hour or so). If the disk works, but the drive doesn't, and if you have a firewire cable, use the other machine (PowerBook) in target disk mode and put the DVD in to it, power up the MacBook with Option key pressed, boot from the DVD and install - this would most likely work (one thing I don't know is the Intel/PPC difference in the firewire target for INSTALLS - I do remember reading about some problems installing that way, unconfirmed). If the disk doesn't work, then you'd have to revert to the DMG you created.
Copy the DMG to the USB drive - you MAY get lucky if your MacBook boot off the USB (some people have success with it, esp. if their USB drive has been partitioned with GUID). So that is a possible way to install (if you get a boot option while powering up with the Option key pressed). Again, you have the option of using the MacBook's drive as a temporary storage for your files on the USB drive to format it to GUID, then copying them back to the USB drive, if you want to try it out. This again assumes you have a firewire cable. This method will work if you have the Intel/PPC issues I mentioned in the previous paragraph.
Do a websearch for installing leopard from DMG files (include USB in the search if you want to go that route). There are several articles on it.
If all else fails, give Apple a call. In India, call 080 2574 4646, according to http://www.asia.apple.com/buy/ - they should be able to ship you a new DVD (or at least you can buy a firewire cable) overnight - I have been surprised how good the courier service is there. My recommendation is to get a replacement Leopard DVD, so you can have it for future use (and a firewire cable, if you don't have one). Good luck! -
Looking for some guys who use macs and iChat
I got a mac a few years ago and don't have any buddies of mine who use macs, I was wondering if you'd like to talk about macs n stuff, IM me, my aim screen name is "FightClubMaryr"
Hi RandomSkater,
Check this page out about halfway down for Chatter lists.
http://www.ralphjohnsuk.dsl.pipex.com/page5.html
Ralph -
Looking for some advice on CEP HA and Coherence cache
We are looking for some advice or recommendation on CEP architecture.
We need to build a CEP application that conforms to the following:
• HA with no loss of events or duplicate events when failing over to the backup server.
• We have some aggregative rules that needs to see all events.
• Events are XMLs with size of 3KB-50KB. Not all elements are needed for the rules but they are there for other systems that come after the CEP (the customer services).
• The XML elements that the CEP needs are in varying depth in the XML.
Running the EPN on a single thread is not fast enough for the required throughput mainly because network latency to the JMS and the heavy task of parsing of the XML. Because of that we are looking for a solution that will read the messages from the JMS in parallel (multi thread) but will keep the same order of events between the Primary and Secondary CEPs.
One idea that came to our minds is to use Coherence cache in the following way:
• On the CEP inbound use a distributed queue and not topic (at the CEP outbound it is still topic).
• On the CEPs side use a Coherence cache that runs on the CEPs JVMs (since we already have a Coherence cluster for HA).
• Both CEPs read from the queue using multi threading (10 reading threads – total of 20 threads) and putting it to the Coherence cache.
• The Coherence cache is publishing the events to both CEPs on a single thread.
The EPN looks something like this:
JMS adapter (multi threaded) -> replicated cache on both CEPs -> event bean -> HA adapter -> channel -> processor -> ….
Does this sounds sound to you?
Are we over shooting here? Is there a simpler solution for our needs?
Is there a best practice for such requirements?
ThanksHi,
Just to make it clear:
We do not parse the XML on the event bean after the Coherence. We do it on the JMS adapter on multiple threads in order to utilize all the server resources (CPUs) and then we put it in the replicated cache.
The requirements from our application are:
- There is an aggregative query that needs to "see" all events (this means that we need to pass all events thru a single processor and we cannot partition them to several processors).
- Because this is a HA solution the events on both CEPs (primary and secondary) needs to be at the same order when reaching the HA inbound adapter and the processor.
- A single thread JMS adapter is not reading the messages from the JMS fast enough mainly because it takes time to parse the XML to an event.
- Using a multi-threaded adapter or many single threaded adapters with message selector will create a situation that the order of events on both CEPs will not be the same at the processor inbound.
This is why we needed a mediator so we can read in multiple threads that will parse the XMLs in parallel without concerning on order of messages and on the other hand publish all the messages on a single thread to the processors on both CEPs from this shared mediator (we use a replicated cache that runs on both JVMs).
We use queue instead of topic because if we read the messages from a topic on both CEPs it will be stored twice on the Coherence replicated cache. But if we use a queue, when server 1 read the message and put it in the Coherence replicated cache then server 2 will not read it because it was removed from the queue.
If I understand correctly you are suggesting replacing the JMS adapter with an event bean that will read the messages from the JMS directly?
Are you also suggesting that we will not use a replicated cache but instead a stand alone cache on each server? In this case how do we keep the same order of events on both CEPs (on both caches)? -
Making an Arch Linux wiki-reader Android app - Looking for some advice
Hey guys, hopefully this is an ok place to post this. I've just finished a beginning Java course and I'm starting on the next one. I'm learning Java with the intention of creating Android applications as a hobby. Since I've found myself accessing the wiki from my phone on many occasions, and this doesn't seem overly difficult, I think this is a good place to start.
I've been playing with this idea for a couple of weeks and I'm trying to determine the best way to approach this. I'm looking for any pointers/advice from a development standpoint and any (potential) user feedback as well.
So far, with the help of other Archers, I have come up with the following three options:
1) Obvious choice- Connect to the actual wiki online
Pros:
+Always up to date
+Small application size
Cons:
-More difficult to strip current style and "mobilize" layout (there is a lot of clutter and links to outside of the wiki)
-More permissions that other choices
-Requires internet connection
2) Use the arch-wiki-docs package
Pros:
+Offline
+Easier to add css styles
+Hopefully would require zero permissions
Cons:
-Application would be large ~40MB (Maybe it could be reduced by removing non-english languages?)
-Not up to date, but pretty close
3) Use the arch-wiki-lite package
Pros:
+Offline
+Small application size
+Hopefully would require zero permission
+More of a native android application feel instead of a dedicated webpage reader
Cons:
-No links to other pages
-Would need to create style/layout from scratch
-Not really sure how this would work (Searching, etc)
-Not up to date, but pretty close
Right now I'm leaning towards the second option, but only if I can figure out an automated way to strip down the html pages and remove the non-english pages. I'm thinking that I'll start with an English only version, then add international support (or a second version) later on if people want it. What are your thoughts?Thanks for the response!
rickeyski wrote: 1. Any app you make will require you to generate your own layouts android uses xml layouts there are webviews, which provide some of this functionality if you need to use html, however this will require online access.
The arch-wiki-docs package is in HTML and I'm using WebView to read it locally. The arch-wiki-lite package is a text file. Maybe I could import it into a database? Either way, using that package will require me to create the whole layout.
rickeyski wrote: 2 you could use a wrapper like phonegap, but that would me writing everything in html, css, javascript and you will use virtually none of your java.
I've used Titanium Studio before, which I think is pretty similar to Phonegap, but I do want to make this one with Java.
rickeyski wrote: 3. 40 mb is a huge app, granted its before compression, but its also before all of your code and layouts to make it work.. You would be limiting yourself to only the newest androids, don't know which phone you have in mind, but might not be a problem for you.
40MB is the compressed size. The html docs are over 100MB uncompressed. I think I could significantly reduce the size by removing the non-english pages, but I can't figure out a systematic way to find them. There are 3551 pages and they use names like 00000965.html, 00000967.html, 00000968.html, 00000974.html, etc. (Of those 967 isn't english, but the other three are.)
rickeyski wrote: 4. the biggest plus is the android docs and examples apps are very good, start reading.
Yup. I've been reading through those a lot. They are a big help.
Last edited by ioos (2012-02-11 23:11:05) -
Looking for some advice dealing with Kernel Panics
Hi there! I'm looking for some help regarding constant kernel panics I've been getting on my machine. It has been happening pretty regularly for the last month or so, occuring sometimes three times in one day and other times none. I've been looking to see what might cause the issue and have thus far come up emptyhanded. I can't think of anything I've modified recently that would be causing the issue. I performed a hardware test using AHT and no errors were found. I've included both the most recent report from the panic as well as the EtreCheck report. Any and all advice is appreciated!
Thanks in advance!
Anonymous UUID: D680EEB6-4BD2-B93C-318E-D6D262CA3B53
Mon Apr 28 17:28:08 2014
panic(cpu 0 caller 0xffffff7f875b6fb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811c014000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80f57cb140 : 0xffffff8005222fa9
0xffffff80f57cb1c0 : 0xffffff7f875b6fb0
0xffffff80f57cb290 : 0xffffff7f85c94eab
0xffffff80f57cb350 : 0xffffff7f85d5e49a
0xffffff80f57cb390 : 0xffffff7f85d5e50a
0xffffff80f57cb400 : 0xffffff7f85fdd056
0xffffff80f57cb530 : 0xffffff7f85d81b39
0xffffff80f57cb550 : 0xffffff7f85c9b8fd
0xffffff80f57cb600 : 0xffffff7f85c99408
0xffffff80f57cb800 : 0xffffff7f85c9a386
0xffffff80f57cb8e0 : 0xffffff7f86c0c9c2
0xffffff80f57cb920 : 0xffffff7f86c1c37f
0xffffff80f57cb940 : 0xffffff7f86c4a33b
0xffffff80f57cb980 : 0xffffff7f86c4a39b
0xffffff80f57cb9c0 : 0xffffff7f86c21e15
0xffffff80f57cba10 : 0xffffff7f86bedb5e
0xffffff80f57cbaa0 : 0xffffff7f86be9ae7
0xffffff80f57cbad0 : 0xffffff7f86be7636
0xffffff80f57cbb00 : 0xffffff80056cbe03
0xffffff80f57cbb90 : 0xffffff80056cdcff
0xffffff80f57cbbf0 : 0xffffff80056cb81f
0xffffff80f57cbd40 : 0xffffff80052b6558
0xffffff80f57cbe50 : 0xffffff8005226bf1
0xffffff80f57cbe80 : 0xffffff80052139f5
0xffffff80f57cbef0 : 0xffffff800521e043
0xffffff80f57cbf70 : 0xffffff80052c976d
0xffffff80f57cbfb0 : 0xffffff80052f3b46
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000->0xffffff7f85eadfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f85eb8000->0xffffff7f86161fff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@ 0xffffff7f875a9000->0xffffff7f875bbfff
dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7f875a1000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f85bdd000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f875a4000
com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f8 6bcc000->0xffffff7f86c96fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000005000000
Kernel text base: 0xffffff8005200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 31531656545358
last loaded kext at 27797939824574: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f876b9000, size 20480)
last unloaded kext at 27858255752654: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f876b9000, size 16384)
loaded kexts:
com.splashtop.driver.SRXFrameBufferConnector 1.5
com.avatron.AVExFramebuffer 1.7
com.splashtop.driver.SRXDisplayCard 1.5
com.Cycling74.driver.Soundflower 1.5.2
com.avatron.AVExVideo 1.7
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AGPM 100.14.15
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.35
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.CoreStorage 380
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: iPhone
USB Device: Built-in iSight
USB Device: IR Receiver
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
Thunderbolt Bus:
EtreCheck:
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:8:28
Disk Information:
Hitachi HTS725050A9A362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 499.25 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. iPhone
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 7
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[kext loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[kext loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) Support
[kext loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) Support
[kext loaded] com.splashtop.driver.SRXDisplayCard (1.5 - SDK 10.8) Support
[kext loaded] com.splashtop.driver.SRXFrameBufferConnector (1.5 - SDK 10.8) Support
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.barebones.textwrangler.plist Support
[loaded] com.bitcasa.BitcasaUpdateCheck.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.realvnc.vncserver.plist Support
[failed] com.splashtop.streamer.SRServiceDaemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.amazon.sendtokindle.launcher.plist Support
[failed] com.bitcasa.BitcasaUI.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.realvnc.vncserver.peruser.plist Support
[not loaded] com.realvnc.vncserver.prelogin.plist Support
[failed] com.splashtop.streamer.SRServiceAgent.plist Support
[running] klpr-relay.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[running] com.pando.PMB.plist Support
[failed] com.ruudburger.couchpotatoserver.plist Support
[failed] com.ruudburger.headphones.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items:
runapp.command
Dropbox
Alfred 2
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.0.18358 Support
Default Browser: Version: 537 - SDK 10.9
SlingPlayer: Version: (null) Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 Support
googletalkbrowserplugin: Version: 5.3.0.18358 Support
AdobePDFViewer: Version: 10.1.9 Support
PandoWebPlugin: Version: PandoWebPlugin 2.3.3.8 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.2.1 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071706000001 Support
3rd Party Preference Panes:
Flash Player Support
Java Support
Perian Support
Time Machine:
Skip System Files: YES - System files not being backed up
Auto backup: YES
Volumes being backed up:
Destinations:
MyBook [Local]
Total size: 2
Total number of backups: 2
Oldest backup: 2012-08-22 09:59:19 +0000
Last backup: 2013-05-08 19:40:47 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 0 B X 3)
Time Machine Backups [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
100% Microsoft Word
3% WindowServer
2% mdworker
2% Google Chrome
0% fontd
Top Processes by Memory:
246 MB iTunes
180 MB Google Chrome
172 MB WindowServer
156 MB com.apple.IconServicesAgent
131 MB Microsoft Word
Virtual Memory Information:
3.54 GB Free RAM
2.59 GB Active RAM
730 MB Inactive RAM
1.15 GB Wired RAM
475 MB Page-ins
0 B Page-outsThe likely culprit:
The problem is likely due to the discreet GPU failing. Download gfxCardStatus 2.3 and use it to disable the GPU. This is a temporary workaround until you get your motherboard replaced.
Possible other causes are the software that installed these:
com.splashtop.driver.SRXFrameBufferConnector 1.5
com.avatron.AVExFramebuffer 1.7
com.splashtop.driver.SRXDisplayCard 1.5
com.avatron.AVExVideo 1.7
Now they may be causing panics because the try to use acceleration in the GPU which leads to the panics. You are unlucky to have a particular model that has a real problem with this. -
Hi. Hope this is right forum. First post. A brief background. Years ago (2007-2008) I created a web portfolio for school. First it was in HTML (Dreamweaver) and then Flash. I hadn't really touched it in years and decided this past couple of months, after playing in the medium again, to get back into wed design, 3d, and digital content creation. That said, I went in and updated both the HTML and Flash versions with the knowledge I currently have, limited though it is. I now would like to go forward and build a completely new site and teach myself HTML, JavaScript, and WebGL along the way (possibly before hand). Hopefully I'll get working on the new site before the end of the year. In the mean time, I'm using my old site as a stop-gap measure. I've also taken books out from the library to begin journey into the above mentioned languages.
This all said, I'm looking for some advice on what direction I should go next...look into... Does my current objective seem reasonable? Also, could anyone give feedback on what I did wrong and what I've done right on my old site. I think, as far as what went wrong, the Flash page is just too large. No one wants to wait so long for it to load. I think I got carried away with it. Also, too many sound effects. That said, I think the HTML site was constructed in an "old-fashion" way. No one makes sites like that anymore. I basically set it up in Photoshop, sliced it, and assembled it in Dreamweaver. The end result is a bunch of tables in HTML? A friend suggested I look into a CMS (?) like WordPress?
Here's my current site: http://www.personal.kent.edu/~mstingle/
Constructive feedback on what I did right and wrong would be great. And, where I should be looking next for rebuild of my portfolio.
Cheers.WebGL is still experimental. Most browsers don't fully support it yet.
http://caniuse.com/webgl
The current trend is Responsive Web Design -- layouts that work in all devices (mobile, tablet and desktop). This technology relies on CSS layouts (no tables) with media queries for different viewport widths. Below is a crude example built with the FluidGrid Layouts feature in DW CS6 or CC:
http://alt-web.com/FluidGrid/Fluid2.html -- resize your browser's viewport to see it in action.
Flash is dead on the web now because the world's most popular mobile & tablet devices don't support it. Animations are mostly being built with HTML5, CSS3 and JavaScript. See Adobe Edge Animate.
If you're not a skilled coder and just want a basic static web site, Adobe Muse might be all you need. http://www.adobe.com/products/muse.html That said, Muse cannot support server-side programming so you can't use it for advanced features like CMSs, blogs, etc...
If you're a Creative Cloud member, you can use Behance & ProSite to build & share your portfolio online.
http://www.adobe.com/products/creativecloud/behance-community.html
http://prosite.com/
In terms of your own site, ask yourself how much content & which features it will need to support in the coming months/years. If it's going to be a relatively small site (under 20 pages), a static HTML site is probably all you need. IMO, WordPress -- a dynamic CMS built with PHP & MySql databases -- would be overkill. However, if you plan to make your site into a blog for example, then a dynamic CMS is an option to consider. WordPress isn't the only kid on the block either. There's also Drupal, Joomla!, and many more...
Nancy O. -
Looking for some advice on what to do about
So I have a macbook pro - late 2007 model I guess
2.16 core duo(just before the core 2 duo's i guess)
2gig's ram
ATY,RadeonX1600 256mb
My problem itself is in 3 parts
1.) My battery fried late 2008(have it running off the adapter since) and I was wondering if my model will fit with the 2008 model batteries? If so do you know how much it would cost(cdn dollars if possible)
2.) My video card is from what I believe to be ruined/terrible shape. I've been using SMC fan control for awhile to sway the overheating, and it helps but I believe the damage was already done while I did not have it active while using my computer for games and other various things(MBP's seem to run insanely hot?)
I will be calling the apple store i bought it from tomorrow but I was looking for some advice on any type of diagnostic tests I might be able to do to test my video card as well how much would it cost to replace(assuming you can't upgrade much in a laptop)
3.) Wondering your opinion on the overall value of the computer with the replacements/without.
It appears to run perfectly fine though sometimes when program's open up I start to see tearing and pixel's looking crazy all over my screen(assuming a fried video card)You can buy the battery design for any old MacBook Pro models (not the unibody). MacBook Pro from the first to the last generation uses the same battery. It cost $129 (not sure how much it cost in Canadian but probably a $20-$30 premium). As for your graphics card, Apple has a one price model for all hardware repairs ($310 or something around there and converted to Canadian probably around $350 to $360). I think you should get it replaced. The only test that I can think of is to re-install the OS and see if the problem occurs, if it does then its most likely a hardware issue. There is no standard test that's widely available. With the replacement I think the computer values in the range of $1800 to $1500) and without the repair I would say about $1350 to $1000 at best.
-
Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut Pro series would work well with this set up ? regards
How much Ram? Final Cut Pro X is the only version curently developed and is available on the App Store.
Maybe you are looking for
-
Update Schedule line Delivery date using Bapi_po_Change
Hi all, I am using Bapi_po_change to Update the Schedule line Delivery date(EKET-EINDT) for the PO based on the Item and the Schedule line. I am passing the PO number, Po header, Item structure, Schedule line Structure. But the Date is not getting up
-
ITunes m4a to wma--- is that controversy truly good for apple?
Seems to *this (20-year+ Mac) user that iTunes software's refusal to export to wma is counter-productive and off-putting. My daughter was given an mp3 player other than iPod (Rave) and cannot use the music she has already purchased on my iMac in iTun
-
PL/SQL-find out extra rows present in table by comparing 2 similar tables
Hi, can any one give me an idea to find out the extra rows present in table by comparing 2 similar tables using pl/sql. REQUIREMENT::i am working on the upgrade environment.my previous database has some tables and having data.Now functional folks are
-
Upgrade to Reader DC and the icons preview inside teh folders stop working...
On a win7 32 desktop I upgrade the new reader. I have also installed Adobe Acrobat 9 standard Italian Rel. 9.5.5 After the upgrade for the Reader DC the preview disappeared, I remove the reader but the problem remain...
-
Colouring a header in a table ?
Hi People, Is it possible to give color shade to the header of a table in smartform? thanks, siva