Looking for some wireless device
I'm planning on buying a computer for myself and I would like to know if it's possible to connect this computer with my wireless router without having to buy a very long ethernet cable. My room is on the same floor as my router, but it's several feet away from it. However, I can get a good signal from that distance.
For reference, my wireless router is a Linksys Wireless-G Broadband Router with 4-Port Switch (Model: WRT54G).
Just make sure that the new computer has a wireless adapter. Then you can connect wirelessly to your WRT54G.
If you are getting a laptop, then simply make sure that it has a built-in wireless card. Almost any wireless card sold today will be wireless g or wireless n, which should work with your WRT54G.
If you are getting a desktop or tower computer, then you may need to add a wireless adapter. They can be added either internally (on a PCI card that plugs into your computer), or via a USB port on your computer.
Similar Messages
-
i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?
korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced. -
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
Looking for some advice dealing with Kernel Panics
Hi there! I'm looking for some help regarding constant kernel panics I've been getting on my machine. It has been happening pretty regularly for the last month or so, occuring sometimes three times in one day and other times none. I've been looking to see what might cause the issue and have thus far come up emptyhanded. I can't think of anything I've modified recently that would be causing the issue. I performed a hardware test using AHT and no errors were found. I've included both the most recent report from the panic as well as the EtreCheck report. Any and all advice is appreciated!
Thanks in advance!
Anonymous UUID: D680EEB6-4BD2-B93C-318E-D6D262CA3B53
Mon Apr 28 17:28:08 2014
panic(cpu 0 caller 0xffffff7f875b6fb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811c014000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80f57cb140 : 0xffffff8005222fa9
0xffffff80f57cb1c0 : 0xffffff7f875b6fb0
0xffffff80f57cb290 : 0xffffff7f85c94eab
0xffffff80f57cb350 : 0xffffff7f85d5e49a
0xffffff80f57cb390 : 0xffffff7f85d5e50a
0xffffff80f57cb400 : 0xffffff7f85fdd056
0xffffff80f57cb530 : 0xffffff7f85d81b39
0xffffff80f57cb550 : 0xffffff7f85c9b8fd
0xffffff80f57cb600 : 0xffffff7f85c99408
0xffffff80f57cb800 : 0xffffff7f85c9a386
0xffffff80f57cb8e0 : 0xffffff7f86c0c9c2
0xffffff80f57cb920 : 0xffffff7f86c1c37f
0xffffff80f57cb940 : 0xffffff7f86c4a33b
0xffffff80f57cb980 : 0xffffff7f86c4a39b
0xffffff80f57cb9c0 : 0xffffff7f86c21e15
0xffffff80f57cba10 : 0xffffff7f86bedb5e
0xffffff80f57cbaa0 : 0xffffff7f86be9ae7
0xffffff80f57cbad0 : 0xffffff7f86be7636
0xffffff80f57cbb00 : 0xffffff80056cbe03
0xffffff80f57cbb90 : 0xffffff80056cdcff
0xffffff80f57cbbf0 : 0xffffff80056cb81f
0xffffff80f57cbd40 : 0xffffff80052b6558
0xffffff80f57cbe50 : 0xffffff8005226bf1
0xffffff80f57cbe80 : 0xffffff80052139f5
0xffffff80f57cbef0 : 0xffffff800521e043
0xffffff80f57cbf70 : 0xffffff80052c976d
0xffffff80f57cbfb0 : 0xffffff80052f3b46
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000->0xffffff7f85eadfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f85eb8000->0xffffff7f86161fff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@ 0xffffff7f875a9000->0xffffff7f875bbfff
dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7f875a1000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f85bdd000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f875a4000
com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f8 6bcc000->0xffffff7f86c96fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000005000000
Kernel text base: 0xffffff8005200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 31531656545358
last loaded kext at 27797939824574: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f876b9000, size 20480)
last unloaded kext at 27858255752654: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f876b9000, size 16384)
loaded kexts:
com.splashtop.driver.SRXFrameBufferConnector 1.5
com.avatron.AVExFramebuffer 1.7
com.splashtop.driver.SRXDisplayCard 1.5
com.Cycling74.driver.Soundflower 1.5.2
com.avatron.AVExVideo 1.7
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AGPM 100.14.15
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.35
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.CoreStorage 380
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: iPhone
USB Device: Built-in iSight
USB Device: IR Receiver
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
Thunderbolt Bus:
EtreCheck:
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:8:28
Disk Information:
Hitachi HTS725050A9A362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 499.25 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. iPhone
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 7
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[kext loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[kext loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) Support
[kext loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) Support
[kext loaded] com.splashtop.driver.SRXDisplayCard (1.5 - SDK 10.8) Support
[kext loaded] com.splashtop.driver.SRXFrameBufferConnector (1.5 - SDK 10.8) Support
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.barebones.textwrangler.plist Support
[loaded] com.bitcasa.BitcasaUpdateCheck.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.realvnc.vncserver.plist Support
[failed] com.splashtop.streamer.SRServiceDaemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.amazon.sendtokindle.launcher.plist Support
[failed] com.bitcasa.BitcasaUI.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.realvnc.vncserver.peruser.plist Support
[not loaded] com.realvnc.vncserver.prelogin.plist Support
[failed] com.splashtop.streamer.SRServiceAgent.plist Support
[running] klpr-relay.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[running] com.pando.PMB.plist Support
[failed] com.ruudburger.couchpotatoserver.plist Support
[failed] com.ruudburger.headphones.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items:
runapp.command
Dropbox
Alfred 2
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.0.18358 Support
Default Browser: Version: 537 - SDK 10.9
SlingPlayer: Version: (null) Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 Support
googletalkbrowserplugin: Version: 5.3.0.18358 Support
AdobePDFViewer: Version: 10.1.9 Support
PandoWebPlugin: Version: PandoWebPlugin 2.3.3.8 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.2.1 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071706000001 Support
3rd Party Preference Panes:
Flash Player Support
Java Support
Perian Support
Time Machine:
Skip System Files: YES - System files not being backed up
Auto backup: YES
Volumes being backed up:
Destinations:
MyBook [Local]
Total size: 2
Total number of backups: 2
Oldest backup: 2012-08-22 09:59:19 +0000
Last backup: 2013-05-08 19:40:47 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 0 B X 3)
Time Machine Backups [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
100% Microsoft Word
3% WindowServer
2% mdworker
2% Google Chrome
0% fontd
Top Processes by Memory:
246 MB iTunes
180 MB Google Chrome
172 MB WindowServer
156 MB com.apple.IconServicesAgent
131 MB Microsoft Word
Virtual Memory Information:
3.54 GB Free RAM
2.59 GB Active RAM
730 MB Inactive RAM
1.15 GB Wired RAM
475 MB Page-ins
0 B Page-outsThe likely culprit:
The problem is likely due to the discreet GPU failing. Download gfxCardStatus 2.3 and use it to disable the GPU. This is a temporary workaround until you get your motherboard replaced.
Possible other causes are the software that installed these:
com.splashtop.driver.SRXFrameBufferConnector 1.5
com.avatron.AVExFramebuffer 1.7
com.splashtop.driver.SRXDisplayCard 1.5
com.avatron.AVExVideo 1.7
Now they may be causing panics because the try to use acceleration in the GPU which leads to the panics. You are unlucky to have a particular model that has a real problem with this. -
I'm looking for some inspiration here on how best to set up my TC
Copied from a post else where, any help greatly appreciated!!
I'm looking for some inspiration here on how best to set up my TC for my needs & wondering how others do for similar needs....
I have a 2TB TC that I have set up so that all of mine & my girlfriends photo's, music, movies & documents are on the one location so that we can access it wirelessly from both our MacBooks & also from a MacMini which I'm going to buy in a month or 2. Changing the location for where iTunes & iPhoto look wasn't a problem but browsing through iPhoto in particular is really slow due to the number of previews I presume, and also we are now unable to have any of the media with us when traveling about, synching phones on the move is a disaster as well!
Anyway,
is there an easy way of setting up iTunes / iPhoto so that we can have all the data on the TC managed on the MacMini but import small iTunes Playlists & iPhoto Albums to our MacBooks without having to change in preferences where the applications look for data each time we get home?
Any help anybody can offer would be grand!
Thanks in advance.........You topic might be better suited for the iPhoto or iTunes forums, since your question seems to be with the application(s) functionality, not really the Time Capsules. However, if you start iPhoto or iTunes while holding down on the "option/alt" key, you can manually select a library to access. When you want one of your computers to access the library on the Time Capsule, make sure it's mounted as a shared volume on your Desktop and then open iTunes and point it towards the library on the Time Capsule. If you want to use a smaller library on your computer, open iTunes and point it to the library on your Mac. I've never switched back and forth multiple times between multiple libraries, so you might check in the iPhoto or iTunes forums to see if any issues may arise from doing this repeatedly.
-Doug -
Im looking for some assistance in configuring our wireles...
Im looking for some assistance in configuring our wireless router to allow remote connections into it.. and then from there access any of the 5 computers on our network. I dont have the model number with me now, but just want to know where to start....
Goal=== to allow me to access our remote locations network and access / vnc into our 5 terminals...
I just need to know how i can configure the router to allow outside connections and then from there connect to our other machines via VNC...
Any suggestions on where to start with this?in order to access the router remotely , you need to enable remote management on the router and to access the terminals using VNC .. you need to open the ports used by VNC ..
-
Hi. Hope this is right forum. First post. A brief background. Years ago (2007-2008) I created a web portfolio for school. First it was in HTML (Dreamweaver) and then Flash. I hadn't really touched it in years and decided this past couple of months, after playing in the medium again, to get back into wed design, 3d, and digital content creation. That said, I went in and updated both the HTML and Flash versions with the knowledge I currently have, limited though it is. I now would like to go forward and build a completely new site and teach myself HTML, JavaScript, and WebGL along the way (possibly before hand). Hopefully I'll get working on the new site before the end of the year. In the mean time, I'm using my old site as a stop-gap measure. I've also taken books out from the library to begin journey into the above mentioned languages.
This all said, I'm looking for some advice on what direction I should go next...look into... Does my current objective seem reasonable? Also, could anyone give feedback on what I did wrong and what I've done right on my old site. I think, as far as what went wrong, the Flash page is just too large. No one wants to wait so long for it to load. I think I got carried away with it. Also, too many sound effects. That said, I think the HTML site was constructed in an "old-fashion" way. No one makes sites like that anymore. I basically set it up in Photoshop, sliced it, and assembled it in Dreamweaver. The end result is a bunch of tables in HTML? A friend suggested I look into a CMS (?) like WordPress?
Here's my current site: http://www.personal.kent.edu/~mstingle/
Constructive feedback on what I did right and wrong would be great. And, where I should be looking next for rebuild of my portfolio.
Cheers.WebGL is still experimental. Most browsers don't fully support it yet.
http://caniuse.com/webgl
The current trend is Responsive Web Design -- layouts that work in all devices (mobile, tablet and desktop). This technology relies on CSS layouts (no tables) with media queries for different viewport widths. Below is a crude example built with the FluidGrid Layouts feature in DW CS6 or CC:
http://alt-web.com/FluidGrid/Fluid2.html -- resize your browser's viewport to see it in action.
Flash is dead on the web now because the world's most popular mobile & tablet devices don't support it. Animations are mostly being built with HTML5, CSS3 and JavaScript. See Adobe Edge Animate.
If you're not a skilled coder and just want a basic static web site, Adobe Muse might be all you need. http://www.adobe.com/products/muse.html That said, Muse cannot support server-side programming so you can't use it for advanced features like CMSs, blogs, etc...
If you're a Creative Cloud member, you can use Behance & ProSite to build & share your portfolio online.
http://www.adobe.com/products/creativecloud/behance-community.html
http://prosite.com/
In terms of your own site, ask yourself how much content & which features it will need to support in the coming months/years. If it's going to be a relatively small site (under 20 pages), a static HTML site is probably all you need. IMO, WordPress -- a dynamic CMS built with PHP & MySql databases -- would be overkill. However, if you plan to make your site into a blog for example, then a dynamic CMS is an option to consider. WordPress isn't the only kid on the block either. There's also Drupal, Joomla!, and many more...
Nancy O. -
Looking for Some Recommendations on A Printer for the 15" MPB
Hello-
I have a 15" retina display MBP configured in the works. I have only used Cannon printers in the past with my Apple computers and prefer to stay with a Cannon for the new MBP retina dispaly. I am looking for some personal recommendations to look at from people that have a current Cannon printer/scanner and are pleased with the machine.I got one with my computer that I love. I'm a fan of all-in-ones because I have every function there if I need it. Plus, this one has airprint, so you can have the printer join your wifi network, and instantly print to it from any iOS device or Mac without any setup - it just works.
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg4120 -
I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?
This is just a shot in the dark....
Do you have all your devices hooked up (and on) when you launch FMLE? For example -- your camera or digitizer? When FMLE launches it will try to launch with the last known settings... including input devices. If it can't find these devices (they're not hooked up and on) it can crash, although in most situations it will simply show a default screen with default settings.
If you do have your equipment hooked up (and on) when you launch FMLE, try unplugging them and then launching FMLE so that it opens up in default configuration mode (no input devices selected; all default settings). Then uncheck the "preview" boxes for both your input and output preview windows. Close FMLE and then plug in your equipment (and turn it on) and relaunch FMLE. I offer this suggestion as FMLE can sometimes act funny when the preview windows are open with certain types of input devices. Don't worry -- you don't have to keep the preview windows off forever. If you can get FMLE to successfully launch with the preview windows off, then you can set your settings however you like and save the profile. Then quit and relaunch FMLE and then turn the preview windows back on and see if it works. If it does, great. Just be aware that making any settings changes while the preview windows are open could result in FMLE crashing. Again -- this only happens with some capture devices, such as certain Dazzle capture boxes.
If none of this works, you could always try to upgrade to FMLE 3.2 and see if that solves your problem. -
I am looking for best wireless earphones for my iPhone 5s
I am looking for best wireless earphones. I travel a lot and I need good sound quality earphones.
"Best" in something like headphones is very much a matter of personal preference. Much depends on the type of heaphones you're looking for and how much you're willing to spend. I am very, very fond of the Beats Studio HDs. I take public transportation and they block out most of the annoyances. They are also large and expensive. I can't use them for running.
www.ilounge.com used to do pretty good reviews of accessories for iOS devices. Or, try Amazon, tons of reviews there. -
Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
I am a teacher and my building just purchased a set of 25 ipad 2s. I am looking for some form of a carrying case where a teacher or students can take 20-25 ipads from the iPad storage cart and carry it to the classroom. Some classrooms are on the second floor so something that would hold them safely would be great. Thanks for the help!!
Check out the carts on this page. Great ways to spend taxpayer dollars!
http://www.apple.com/education/labs/
An Apple iPad Learning Lab streamlines the management of classroom sets of iPad devices. Each lab includes 10 iPad devices and a sturdy and secure mobile cart. The cart can store, charge, and sync up to 30 iPad devices and has room for a MacBook computer. The cart rolls easily around campus, so multiple classes can benefit, and it can be locked to secure the devices when they’re not in use. For even more iPad portability, the Bretford PowerSync Tray can charge, sync, store and secure up to 10 iPad devices at once and is available only through Apple. Purchase a predesigned Apple iPad Learning Lab or let us help you build your own iPad mobile lab. -
I am looking for some advice on data roaming in Lanzarote
Hi All I am going to Lanzarote in a few days and I am looking for some advice on data roaming, what add on's are available and how much will it cost.There isn't much info on the website.Also my son is on Orange, does anyone know what the charges will be for him? We are both on pay monthly. Thanks
Buying a bundle doesn't mean that your device will work aborad you need to make sure roaming is enabled on your account.
If you have a EE extra plan you still need to make sure roaming is enable on your account your plan only gives you free/cheaper calls when abroad.
If your wanting to enable roaming on your account there could be a deposit to pay if you haven't had the device for about 6 months.
Unless you have paid the deposit then roaming is not enabled on your account.
You need to activate roaming on your account by calling 150 from your device or from a landline 01707 315000 before you leave the UK.
But you can still do this if you are abroad.
If you have had the device/contract for 6 months or over you can login to your online account and turn on roaming yourself
Manage this device>Usage controls>Roaming abroad - Allow and Call abroad and turn it on. If the option is not there you need to call
It can take 24 hours to activate
If you had this device/contract for under 6 months you need to call customer services on +44 7953 966250 from a landline.
Once you have activated roaming you can then use this link to see what cost there is and what bundles you can have.
http://explore.ee.co.uk/roaming/ee
Please read this about voicemail
http://ee.co.uk/help/getting-started/setting-up-voicemail/divert-to-voicemail
And this
http://ee.co.uk/articles/set-up-your-phone-for-using-abroad
Also sending a text to 150 with the words of RO country your going to i.e. RO Spain will get you a reply of what the costs will be from that country. -
BATCH CAPTURE TAPELESS workflow still FCP is looking for a capture device when going ONLINE
Hi,
I am working on a documentary and about to go online with my edit.
I used Sony FS100. Tapeless. I did Log and Transfer to ProRes 422 in FCP 7.
Later when I run out of space I used Media Manager to RECOMPRESS everything to ProRes Proxi. Worked well.
But now when I try to batch capture to ProRes 422 FCP is looking for a capture device thinking I am working with tapes.
How do I make FCP undrerstand I am tapeless? Does the recompress kill the possibility of bach capturing back to online full quality 422?
Thanks for the support!
GaborI have read through some more forums and I only found one mention of the Media Manager 'Recomress' function.
It said:
"Transcoding with MM (recompress). It preserves timecode/reel name, file names, etc... Except the clip ID, which is used along with reel name and timecode to batch capture from source files (at least for P2)."
Clip ID is the metadata relyable for the work of batch capture. It seems without it it is impossible to batch capture.
I wonder why they designed Recompress like that, if it is true? -
Looking for some assistancte in GUI_DOWNLOAD
Hi there,
See I have this exercise I have to do here. Basically I have to create a program that will download the contects of SBOOK to my pc. I have to use GUI_DOWNLOAD in this exercise. Also, the user will have to input the path and file name of the file to be downloaded to. I have place appropriate error message on the screen as well but I'm not sure how to do this.Being relatively new to this, I tried looking for some samples and this is what I came up so far.
REPORT ZISTANZS_TRNG_EX9C.
TABLES: SBOOK.
PARAMETERS: FILEINP(30) DEFAULT 'c:\TEMP\wee.txt' OBLIGATORY.
DATA: BEGIN OF ITAB OCCURS 100.
INCLUDE STRUCTURE SBOOK.
DATA: END OF ITAB.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = FILEINP
FILETYPE = 'ASC'
write_field_separator = 'X'
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
OTHERS = 3.
Unfortunately, it doesn't work though. It keeps saying that my FILENAME is not the same data type as FILEINP? I'm asking for some assistance in how this can be properly solved? Any help would be appreciated /Hi,
Please refer the code below:
* File download, uses older techniques but achieves a perfectly
* acceptable solution which also allows the user to append data to
* an existing file.
PARAMETERS: p_file like rlgrap-filename.
* Internal table to store export data
DATA: begin of it_excelfile occurs 0,
row(500) type c,
end of it_excelfile.
DATA: rc TYPE sy-ucomm,
ld_answer TYPE c.
CALL FUNCTION 'WS_QUERY'
EXPORTING
query = 'FE' "File Exist?
filename = p_file
IMPORTING
return = rc.
IF rc NE 0. "If File alread exists
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
* TITLEBAR = ' '
* DIAGNOSE_OBJECT = ' '
text_question = 'File Already exists!!'
text_button_1 = 'Replace'
* ICON_BUTTON_1 = ' '
text_button_2 = 'New name'
* ICON_BUTTON_2 = ' '
* DEFAULT_BUTTON = '1'
* DISPLAY_CANCEL_BUTTON = 'X'
* USERDEFINED_F1_HELP = ' '
* START_COLUMN = 25
* START_ROW = 6
* POPUP_TYPE =
IMPORTING
answer = ld_answer
* TABLES
* PARAMETER =
EXCEPTIONS
text_not_found = 1
OTHERS = 2.
* Option 1: Overwrite
IF ld_answer EQ '1'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = p_file "File Name
filetype = 'ASC'
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_excelfile "Data table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i003(zp) WITH
'There was an error during Excel file creation'(200).
exit. "Causes short dump if removed and excel document was open
ENDIF.
* Option 2: New name.
ELSEIF ld_answer EQ '2'.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
filename = p_file "File name
filetype = 'ASC' "File type
* col_select = 'X' "COL_SELECT
* col_selectmask = 'XXXXXXXXXXXXXXXXXXXXXXXXXX'
* "COL_SELECTMASK
filetype_no_show = 'X' "Show file type selection?
* IMPORTING
* act_filename = filename_dat
TABLES
data_tab = it_excelfile "Data table
* fieldnames =
EXCEPTIONS
file_open_error = 01
file_write_error = 02
invalid_filesize = 03
invalid_table_width = 04
invalid_type = 05
no_batch = 06
unknown_error = 07.
ENDIF.
ELSE. "File does not alread exist.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = p_file "File name
filetype = 'ASC' "File type
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_excelfile "Data table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i003(zp) WITH
'There was an error during Excel file creation'(200).
exit. "Causes short dump if removed and excel document was open
ENDIF.
ENDIF.
Thanks,
Sriram Ponna.
Maybe you are looking for
-
I have an HP Deskjet 845c that I just connected by USB to a laptop running Windows 8.1. Black prints just fine, but I can't get it to print in color at all. The printer used to be connected to a PC running Windows 7 and wasn't being used much, espe
-
How I fixed iTunes 5 and Updater 2005-09-23 problem
After a frustrating couple of weeks I have music back on my iPod! (BTW, I drove to an Apple store 60 miles from home and the Genius told me that if this was a major problem Apple would shortly be releasing another update to fix what this update broke
-
Message being sent and wait for event - BPM help.
Hi Experts, I am doing BPM interface, in that i am receiving two files. Between these two files, i have set the coorelation in the BPM and included in the BPM's receive step1 and receive step2. After execution, when i look into the sxmb_moni, message
-
ABAP WD - Dump Perform in program
Hi forum, I've a dump that I'm not able to solve. The problem is that I had a perform in program with 2 parameter and I changed it with 3 parameters. I had adjusted all the code for this form in a subroutine pool program type. The command call is.
-
BaDI:Automatic goods movements
Hi gurus, Can anybody tell whether we can use the BaDI :Automatic goods movements (menu path: SPRO> Production>Shop floor control >system modifications>Business add ins--> BaDI :Automatic goods movements) for the following requirement. 1)To check the