Looking for someone to write custom Premiere plug-in

Hello
I am looking to find a programmer with a working knowledge of writing plug-ins for Premiere to write a custom plug-in for Premiere CS5.
The plug-in is extremely simple. It will be a Video Effect that can be applied to a clip on the timeline. It has one control that slides the top half of the clip to the left and the bottom half of the clip to the right; by a user defined number of pixels. However the plug-in then needs some kind of global control that allows the user to change the functionality of ALL instances of the effect in the current sequence - so at a command they slide the ENTIRE image left or right, and not just the top/bottom half. This could even be implemented by writing 3 plug-ins and shutting down Premiere, substituting the plug-in file on disk and re-starting it.
The reason we want this is that it will enable us to handle changing the depth of stereoscopic 3D clips in a Cineform workflow.
This is a paying job and anyone interested should email me at [email protected] I can supply more detailed information about the functionality if needed.
/ben

Wrong place... try where the programmers hang out
http://forums.adobe.com/community/premiere/premierepro_current/sdk

Similar Messages

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Looking for someone to script a Day Planner to a specific size and style.

Hi,
Looking for someone to script a year long Day Planner in Indesign CC. I've tried one or two scripts available out there but none seem to be able to accomplish what I need.
I would envisage the rolling requirements.
2015
Day per page
Set to a specific Design Style
Fully Editable style hierarchy
Ability to add in pages without kicking anything out
Include Month with highlighted day on right hand page only
Add localised public holidays
Add another list of 'special dates'
Fit size 148.5mm W x 210mm H (would be great to have it scaleable but not essential)
All/any help appreciated. Here's a screen shot of the desired result.

Hi Jarek,
Thanks for the response!
The script needs to create the pages in an Indesign Doc.
One the pages are created we would be adding in custom pages at beginning and at other periodic stages in the document.
Let me know if there's anything else you need
Mark

Looking for someone who can Deliver Oracle Application Express training...!

Hi Good day!
By the way, i am looking for someone who can deliver for Oracle Application Express Training.
If you know someone you can refer to me, i would really appreciate.
You can reach me through this email Address: [email protected]
Mobile number is: +639 092 438 249.
This is URGENT!!!!
Thanks!
Ivy

Can you send along info to a private e-mail adddress?? I would be interested in hearing more, my e-mail address is:
tony DOT Miller AT Seattle DOT gov, the dot and at need to be replaced with the proper character..
Thanks!
Tony Miller
Monroe, WA

Looking for someone on x86_64 to test a snippet of C#

I'm having trouble getting a piece of C# code to work. It's 100% correct and was found working by two users running x86, however on my x86_64 it doesn't.
It should display an icon in the notification area ('system tray'). For me it won't show the icon in gnome, but neither in openbox + trayer. The other two x86(!) users tested in on Gnome as well, and did get the icon to show up.
I'm looking for someone else on x86_64 to test this code, to eliminate (or confirm) that it's a very obscure x86_64 bug. Make sure you're fully synched up - that is Mono 1.9.1, with (preferably) Gnome 2.22.3 (but if it won't work on KDE/Xfce/anything else that pretty much identifies the problem as well).
You can find the 20-line snippet at http://pastebin.com/m4ebdcba6 (save as Test.cs)
Compiling is easy, `mcs -r:System.Drawing,System.Windows.Forms Test.cs` should do the trick, followed by `mono Test.exe`. You will get a messagebox, and at that time it *should* display the icon.
Thanks.

I have Arch64 on Intel Core2Duo, with [testing] repository enabled.
I use KDE 3.5.9. I could try it with KDE 4-svn later as well
Mono version: extra/mono-1.9.1-1
I tried that file and when I disable autohiding of my panel, it works correctly:
http://img389.imageshack.us/img389/5647/screen1lf1.png
If I hide the panel manually (by using the hide button on the right), and I show it again, the icon disappears, but the space is still occupied:
http://img519.imageshack.us/img519/473/screen3on2.png
When I have auto-hiding disabled, it appears fine (just like in the first picture), but when the panel hides and appears again I get black rectangle:
http://img242.imageshack.us/img242/3091/screen2ye7.png
The first time I tried it, the rectangle was white instead
Last edited by tanis (2008-07-15 16:16:06)

Looking for someone to do paid scripting work

Hey,
I'm in a bit of a bind with InDesign scripting - I've got a huge amount of it to do in very little time. I've hired someone on Elance who claims to know about Extendscript etc to help me, but I am slightly dubious. I thought coming to the Adobe forums might be a good idea, as you guys will probably know what you are talking about!
Is there anyone around here offering scripting services for pay? It's quite an interesting project, automating the production of a certain type of book. I am fairly proficient in scripting myself after having written a script to do a similar thing last year, but simply can't deal with the amount of work I have.
I'm looking for someone who really knows InDesign and scripting inside out and who would be able to advise me on best practice, rather than the current situation where I'm instructing someone fairly unskilled how to do things the way I've just sort of 'worked them out'.
Apologies if this is in the wrong place; I'm pretty desperate!
Thanks,
Dan

There's a lot of very qualified folks here on this forum.
The big question is what's the scope of the project as well as time restrains.
I, for example would not be able to look at any sizeable project for at least a month.
Give some more details on what's involved, and someone will probably be able to help...
Harbs

Looking for someone who's a whizz on photoshop

Hi guys and girls,
im not very good on photo shop but looking for someone's who's a whizz on the thing to photshop
something for me
could you get intouch at [email protected]
thanks

Oh, I'm not looking for free-lance work at all. Some people come here with the expectation of freeloading in a forum populated by professionals, so it's good to hear you have no such expectations.
However, "a few quid" doesn't sound too interesting, really, does it? Just saying…

Looking for someone who has DPS Pro.

Hi,
I'm looking for someone who has DPS Professional version.
I would like to publish just one project for Android devices, but I really can't afford Pro version.
So maybe someone could do it for me.
I'll prepare all indd files in InDesign.

Guessing from your first name that you are in Poland.
You may contact Mr Łukasz Kawęcki at Optizen Labs – tel. +48 226170101

I'm looking for someone to render (export) a final cut X project for me.

I'm looking for someone to render (export) a final cut X project for me. I am running FCX on my MB air & it works surprisingly well for small projects. However, I have a 4 minute video that is outside of the limits of my machine. I am assuming there is a way to dropfile the project & have someone else export it for me & dropfile it back to me as a HD video I can post on Vimeo. I am willing to pay for this service.

I may not be doing this correctly, I created the new library & when I tried to copy the the clips it said this:
You are editing compound clips or multicam clips between libraries.
Final Cut Pro will copy files and create new parent clips in the library "Movies".
The new clips will be independent of the original parent clips.
Media stored in external folders will be linked to but not copied.

Looking for someone with ios developer account who can compile and test my app on ios 8

Hi,
my ios developer account expired.
Before I renew it i want to be sure that my app will still run on ios 8
It's a flex app , downloadable on google code : Source Checkout - helpdiabetes-air - HelpDiabetes written for Adobe AIR - Google Project Hosting
So i'm looking for some one with flash builder installed, with the latest flex sdk (4.13) , an ios developer account and a device with ios 8, who wants to build and install the app for me.
See if it runs.
thanks,
Johan

I have to say this is the hardest thing to diagnose that I have come up against over the past 10 years! Completely out of ideas.
If this was just the Intuos3 with the mouse on my G5 then I would just say it is a bad mouse switch, but when a different mouse on two different tablets (Intuos 2 and Intuos3) are both exhibiting the same behavior on two different computers (a G4 Laptop and a G5 Tower) - then something is wrong.
The only other thing I have done to both computers recently is I installed Adobe CS3. Have any of you that have responded also installed CS3?
This is not a Wacom Driver issue, because if you plug in a tablet without the Wacom Driver installed, the mouse should still work like a standard mouse and I am having trouble even then. Even during a restart of the computer as soon as the Wacom tablet blue light comes on - even before the desktop appears, if I hold down the mouse button the tablet will irratically flicker between blue (receiving power from USB) to green (mouse button engaged)? (Again it does not do this with the Pen - it always works fine - just any Wacom mouse).
If it were a USB power issue the tablet light would go off and on, but it doesn't - one of the LEDs is always lit. If it were a tablet grid issue, the Pen would also display the same symptoms - it doesn't. It acts like the mouse does not have enough "consistent power" output to keep the grid engaged when activated which would be easily explained by a bad mouse switch or for sure if the mouse had a bad battery, but I don't think the mouse has a battery does it? And none of this explains why I am getting this on two tablets with two mice (unless the mouse actually does have a battery and both are bad)?
Anyway I am 95% sure this is a communication problem between the mouse and the tablet - not the tablet and the computer and Driver is not in the equation.
Really stumped.

I'm looking for the read/write speeds for my Mac's.

I'm looking for read/write speeds for my Macs, but I can't find consistent data. Does anyone know the speeds or know where I can look? I have three computers:
iMac late 2013 Fusion/3TB i7
iMac late 2009 1TB i7
Macbook Air 256GB i5
Thanks,

I think the feature is called Voice Over, and I think it's now compatible with Reader:
http://support.apple.com/kb/HT3598?viewlocale=en_US&locale=en_US

Looking for volunteers to write application comparison articles

There are a number of "what's the best?", "easiest to configure", and "lightest", questions that come up frequently in the forums: Image viewer, PDF/document viewer, tiling window manager, floating window manager, desktop environment, text editor, IDE, web browser, terminal emulator, ETC. And while there's very good documentation on some of the individual pieces in the wiki, there isn't as much on comparisons between them.
In order to help keep the forums from an endless cycle of repetition, we're looking for volunteers to add some application comparison articles to the wiki. The entries don't need to be comprehensive on individual programs, and there should be every attempt made to not unnecessarily duplicate what's already been written. Basic information on things like keyboard friendliness, lightness, text and/or graphic mode, and the like is encouraged though.
We'd like to use this page as the starting point:
http://wiki.archlinux.org/index.php/Common_Apps
Don't use it for the comparisons themselves, but put a link to the articles under the correct category. The page is already good as it is, although it needs both more entries and to be linked to in the Archwiki Table of Contents for higher visibility (please).
Of course the articles are not for flame wars or opinions. It's a place where users can go to get a good general view of how apps stack up against each other.
Report back any progress made here.

skottish wrote:
There's going to some gray areas, but most it falls into categories. For instance, having separate pages for IDE and text editors is probably silly. Vim is both a text editor and an IDE depending on how it's set up. So is Geany, SciTE, Texmaker, Emacs, ETC. Putting them all together makes sense.
The two categories of window managers (tiling and floating), as well as DE deserve their own pages. What do you do with E17 then? It's as much a DE as it is a WM. If ended up in the floating WM page, as well as the DE page, that'd be fine. And no, it's tiling module doesn't make it a tiling WM.
PDF viewers and document viewers should probably be lumped together because almost all document viewers can view PDF files. Image viewers should get their own page. Same with terminal emulators.
Stuff like GIMP, Inkscape, and Blender probably don't need a comparison page. Even though other stuff can duplicate parts of their functionality, they're pretty much special programs in the Linux world.
Why three pages for WM/DEs ? Put them all in one page, but separate tables or whatever.

Looking for someone to install R12 London, UK

Hi I'm looking for anyone that lives in the UK, preferably London, and is able to install R12 on Linux in Vmware. Please email me at marcusaurelio24 @ googlemail.com for your quotation. Thank you.

cyber3, can you be a little more specific about what you're trying to do? One calendar on your machine accessible by 4 other users logging into your system? One- or two-way syncing of calendars among all users? It's difficult to try to help with the information you provided in your post.

Looking for someone to make a program for my mobile phone

OK, I am looking for a programmer, who could make me a program for my mobile.
I have a sony ericsson w300i
The program needs to, when opened, change all bluetooth devices on the list, to always allow connections. So all the devices on that list are set to always allow and not always ask.
If this is not possible to do, please tell me, or if you could make this program for me, tell me too.
The program must be fast and silent. I need it to just work when opened, without a message coming up or anything, this will allow me to quickly and easily proceed with my business
The reason I need this program, is because I have I REALLY long list of devices, and it really does take a long time to change the settings to allow connection on all of them. (I need to allow connections for the specific programs I test and use, on my PC)
You can access the list (on sony ericsson) by going to: menu -> settings -> connectivity -> bluetooth -> my devices.
I might be willing to pay, if the program works well!

{color:#000080}@DrClap
j2me can't mess around with the security that is built into the bluetooth protocol.
@OP
Bluetooth pairing cannot be overridden nor done programmatically. Ability to connect to another device would always depend on the owner of that device having maintained the BT address of your device in the list of known devices.
Bluetooth connection can be done through a program, but there is nothing to be gained from that unless the program needs the BT connection to transfer data between devices, as the connection is in use as long as the program holds on to it, and disconnected when the program exits (if not before).
db{color}

My pl/sql procedure works; I'm just looking for someone to review it

Hi All,
I wrote the below procedure to be executed via APEX (inside the APEX_PLSQL_JOB.SUBMIT_PROCESS wrapper).
It works fine, but I'm not a programmer per se and am just curious if one of the veterans on this forum could review it
and just tell me if it looks like I followed proper standards/procedures etc. or make any suggestions on how I can be more efficient etc.
The purpose of the procedure is to update Oracle Applications translations tables with language-translated values that we have
accumulated from our global workforce. It's pretty simple - just a big find and replace exercise - replacing english values in the apps
tables with translated values. Oracle's '_TL' tables are designed for this purpose and I'm not updating any primary or foriegn keys.
I don't know the exact update statement or instance at the time of execution and hence the need for dynamic SQL and a DB link.
Again, there are no issues (yet) - everything is working fine, I'm just interested in having someone review it and offer me some feedback.
thanks in advance,
John
create or replace
procedure GSE_UPDATE_TL_TABLES (l_instance IN varchar2, l_app_job IN number)
IS
l_tname varchar2(30);
l_column_name VARCHAR2(30);
l_col_value VARCHAR2(4000);
l_eng_value VARCHAR2(4000);
l_language VARCHAR2(4);
i number;
l_query VARCHAR2(4000);
l_messages dbms_output.chararr;
l_numlines integer := 1000; -- retrieves max 1000 messages from the buffer
l_rows_updated number := 0;
l_rows_processed number;
CURSOR TABLES_CUR IS
SELECT TABLE_NAME, COLUMN_NAME, COLUMN_VALUE, eng_value, LANGUAGE FROM GSE_LNG_STRINGS WHERE COMPLETION_STATUS = 'Y'; ---This table is our repository of translations
and includes the english value, the translated values, the language code and the table and column names that will be updated.
BEGIN
DBMS_OUTPUT.ENABLE(1000000);
delete from gse_update_tracking; ---I'm using this table to track real-time progress and to update a progress status bar in APEX.
commit;
open tables_cur;
LOOP
fetch tables_cur into l_tname, l_column_name,l_col_value, l_eng_value, l_language;
EXIT WHEN tables_cur%NOTFOUND;
BEGIN
EXECUTE IMMEDIATE
'Update ' ||l_tname||'@'||l_instance||' set ' ||l_column_name|| ' = q''['||l_col_value||']'' where ' ||l_column_name|| ' = q''['||l_eng_value||']'' and language = '''||l_language||'''';
l_rows_updated := (l_rows_updated + sql%rowcount);
insert into gse_update_tracking (counter) values (1);
commit;
exception
when dup_val_on_index then
l_query := 'Update ' ||l_tname||'@'||l_instance||' set ' ||l_column_name|| ' = q''['||l_col_value||']'' where ' ||l_column_name|| ' = q''['||l_eng_value||']'' and language = '''||l_language||'''';
DBMS_OUTPUT.PUT_LINE('This query caused DUP_VAL_ON_INDEX exception: '||l_query);
when others then
l_query := 'Update ' ||l_tname||'@'||l_instance||' set ' ||l_column_name|| ' = q''['||l_col_value||']'' where ' ||l_column_name|| ' = q''['||l_eng_value||']'' and language = '''||l_language||'''';
DBMS_OUTPUT.PUT_LINE('This caused an undefined exception: '||l_query);
end;
End Loop;
l_rows_processed := tables_cur%rowcount;
update gse_lng_jobs set rows_processed = l_rows_processed, rows_updated = l_rows_updated where job_id = l_app_job;
close tables_cur;
begin
dbms_output.get_lines(l_messages, l_numlines);
for i in 1..l_messages.count
loop
insert into gse_lng_update_exceptions(id, text, Job) values(i, l_messages(i), l_app_job);
commit;
end loop;
end;
END;

Hoek, davidp 2, Tubby, rp0428 et al.,
I think I'm making progress. I'm researching and trying to incorporate your suggestions.
I worked through the examples of error logging here: http://www.oracle.com/technetwork/issue-archive/2006/06-mar/o26performance-096310.html. I'm not sure if this will work for me though since I'm updating many tables and not just one. So it seems I would need to run this for every table that I'm updating?
BEGIN
DBMS_ERRLOG.CREATE_ERROR_LOG('[table_name]');
END;
Otherwise, this is the current state of things:
create or replace
procedure gse_lng_test_1 (p_table varchar2, p_column varchar2) *--using proper parameter names prefixed with 'p' to distinguish from local variables*
IS
i number;
l_query VARCHAR2(4000);
l_messages dbms_output.chararr;
l_numlines integer := 1000; -- retrieves max 1000 messages from the buffer
l_rows_updated number := 0;
l_rows_processed number;
BEGIN
DBMS_OUTPUT.ENABLE(1000000);
commit;
l_query := 'Update ' ||p_table||' set ' ||p_column|| ' = :newval where '||p_column|| ' = :engval and language = :lang' ; *--build the string once in a local variable with bind variables. Table names and column names are passed via parameters*
for c2 IN (SELECT TABLE_NAME, COLUMN_NAME, COLUMN_VALUE, eng_value, LANGUAGE FROM GSE_LNG_STRINGS WHERE COMPLETION_STATUS = 'Y' and table_name = p_table and column_name = p_column) *--using implicit cursor instead of explicit cursor*
LOOP
BEGIN
EXECUTE IMMEDIATE l_query USING c2.eng_value, c2.column_value, c2.language; *--execute immediate with bind variables*
exception
when dup_val_on_index then
dbms_output.put_line('this query caused a dup_val_on_index: '||SQLERRM||' - '||l_query); *--include SQLERRM in message*
when others then
dbms_output.put_line('this query caused an exception: '||SQLERRM||' - '||l_query); *--include SQLERRM in message*
end;
commit;
end loop;
end;Now that the table names and column names are in parameters, I am calling this from APEX as follows:
Begin
for c1 in (select distinct table_name, column_name from gse_lng_strings)
LOOP
gse_lng_test_1 (p_table=> c1.table_name, p_column=>c1.column_name);
end loop;
end;The one thing I need to do is to get a status of the number of rows processed and updated so I can report back to APEX realtime with a jquery counter plugin that I'm using. That was the reason I was inserting records into a dummy table (gse_update_tracking) before. It worked ok but I realize it was a clumsy approach. I'm not to sure how to accomplish that since I don't think I can access sql%rowcount while the loop is running. Is that correct and if so, are there any other options?
I know I still need to deal with my exception handling and I would like to use the DML error logging if at all possible.
Overall though I feel like it's much cleaner and more manageable. Hopefully it's looking better?
thanks again for the education - I really appreciate it,
John

Looking for someone to write custom Premiere plug-in

Similar Messages

Maybe you are looking for