Looking for stock 3D models

Hi everyone:
I don't know much about 3D models so I might be formulating my question incorrectly (for which I apologize). I'm looking for a wireframe (mesh) only 3D models (RPF or RLA files), and I was wondering if they are provided somewhere as basic/stock 3D files?
Here's an example of what I'm looking for (as a 2D screenshot):
http://www.ivansanchez.com/blog/sentinel/zetaplusa.jpg
http://www.foro3d.com/tutoriales/blender/blender-art-magazine-3d/blender-art-magazine-11/N urbs-Cad_files/File_048.jpg
I need it for some (semi transparent) effect of a 3D object rotating in the background that will be largely zoomed in so I'm not very picky what that object will be.
Thank you in advance!

Den,
If you aren't picky on what it is, as it will be zoomed in quite far -- you can just make another composition of a wireframe globe, or anything with the find edges effect, with others, and then scale it up, make it 3d, render in master composition, and fly around it.
Or proxy to it, render it out with camera in that composition and then drag the rendered footage into the master composition.
This might save you some money on buying a model.

Similar Messages

Looking for driver of Model CT4

i am looking for the driver for creatives sound blaster model CT4730.can anyone hlep me finding the driver for the card.

imtiaz wrote:
i am looking for the driver for creatives sound blaster model CT4730.can anyone hlep me finding the driver for the card.
Hi
Your card model can be indentified here
Search this forum using the CT4730 and driver as a criteria --> you'll find some links to download pages.
jutapa

Looking for chemical molecule modelling software

I wasn't sure where to put this question!
First of all, I am not the chemist (I am a network engineer), I'm just trying to find a solution for a research professor. So don't assume I am familar with any current software, etc. Please give me any info you can!
Said professor is still using "Macmolecule Pro" on a Quadra 950 with System 7.
I'm looking to convert his models into something modern that runs on OS X, or at the very worst OS 9 in emulation so I can get rid of the old 950 in his office and move him to a G4 or G5.
Can anyone point me in any interesting directions?
thanks for any help!
Rob
Powerbook G4 800

These might be of interest:
http://www.versiontracker.com/dyn/moreinfo/macosx/17054
http://www.versiontracker.com/dyn/moreinfo/macosx/27899
http://www.versiontracker.com/dyn/moreinfo/macosx/23506
http://www.versiontracker.com/dyn/moreinfo/macosx/16329

I am looking for a 3D model drawing software program

I am using autocad mechanical desktop for my 3D models. I can not find any way to export the files and convert them for the loader. Perhaps I could use a different program for making my models. Can you suggest an inexpensive software program with parametric dimensioning which exports to .OBJ or something similar?
Any suggestions would be appreciated.
mick
[email protected]

you have a special loader for autocad format see
http://www.j3d.org/utilities/loaders.html
and
http://www.ncsa.uiuc.edu/~srp/Java3D/portfolio/
and if after this you still want to convert it to obj you have this plugin
http://www.fpsols.com/obj_export_ac.html
cyril

Looking for stock Photo app replacement

I have all of my photos organized on my iMac by year and event, something like:
2013
├── Dads_Birthday
├── Christmas
├── Fathers_Day
├── Memorial_Day
├── Miscellaneous
├── Mothers_Day
└── Valentines_Day
Is there an iPhone photo app which will allow me to maintain my directory hierarchy, and also provide the sorely need search capability that the stock Photo app lacks? Will iPhoto for iOS allow me to maintain my directory hirearchy, and search for photos?

It's really stupid not to have a search feature -- iPhoto on the Mac does.
Send feedback to Apple and let the developers know. Here is the feedback form:
iPhoto Feedback
right now, it is really the best strategy to organize photos in iPhoto on your mac and to sync the organized albums to the IOS devices.
Regards
Léonie

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!

2nd hand Mac Pro: what to look for? Want later models

Hi everyone
I have a 27" iMac tha tis a couple of years old. I have outgrown the 1tb hd, and would prefer to go for a standard desktop design to make adding and changing drives easier. I want to avoid obsolence. I am not looking for a very new model, but one that is a current design. Can anyone give tips on how to determine how recent used Mac Pros i come across are?
Thanks in advance for any tips you can pass on!
John

Additional information for completeness:
The 2008 model and previous are Very Different from the 2009 and later. The 2009 and later can accept much more memory and that memory is substantially cheaper. The 2009 and later with the same number and nominal speed of processors approaches twice as fast in benchmarks due to architectural differences
So if you expect to do compute and memory intensive modeling, Photo, Video, or Audio editing, limit your hunt to the 2009 model and later.
If you are doing general work that does not involve large memory sizes, any model Mac Pro will work for you.

Looking for a Good White Paper on Oracle Data Modeling

Hopefully this is the proper area in which to ask this questions - been looking around these boards for a while but can't find what I'm looking for. I'd like to get a good modeling overview for topics such as:
-- pros and cons of normalization, e.g., performance considerations when deciding to normalize some data (and incur the cost of joins) vs keeping it denormalized (and having simpler queries)
-- overall performance considerations
-- warehouse vs mart considerations, esp as they relate to front end tools that will sit on the data mart
A general data modeling white paper or PDF would be very helpful to get me started.
Thanks all!
Mike

You don't need a White Paper you need a college course or a book.
The book I have on my shelf, don't know if it is still in print, is CASE*METHOD Entity Relationship Modelling by Richard Barker
Addison-Wesley Publishing Company
ISBN 0-201-41696-4
Normalization isn't about pros and cons. For performance denormalize. For data integrity normalize. Most systems end up somewhere between 3N and 4N or with what is referred to as Boyce-Codd NF. Google is your friend here but buy the book or take the course. This is not a subject to be read lightly in a dozen or so pages.

Looking for a Suggestion on Protege Notebook Model

Hi,
I might have posted this in the wrong forum, if that is the case then please accept my apologies for the same.
I am looking to buy a new ultrabook. I am looking for the following specs:
Price: Around USD800
Screen Size: 13.3" (This is important as there are weight considerations and hence cannot go for any bigger screen)
Screen should be easily tilted to 180 degrees since I have a small kid who could pull the screen back (I hope you people understand what I am asking for, this feature is not listed in any datasheet of Toshiba Notebooks)
RAM Installed: 4GB (min)
RAM Maximum: 8GB (min) (I should have the option for upgrading the RAM later to 8GB minimum, more the better)
Weight: 3 lbs (or there about)
DVD-ROM: Not NEEDED
HDD: Would like to have a SSD with 256GB but given the price, I guess I have to settle with the normal HDD. But it would be great if I could upgrade later this HDD to a SSD.
Keyboard: Backlit and SPILLPROOF
Now I have kind of short listed some of the models and would love to hear the advise of the techies here.
Model 1:
Portege R935-ST3N02
Link for Datasheet: http://cdgenp01.csd.toshiba.com/content/product/pdf_files/detailed_specs/portege_R935-ST3N02.pdf
Questions in my mind regarding this notebook:
Will the screen be tilted back to 180 degrees, cannot find this information anywhere.
The maximum RAM shown is 8GB but since this device has 2 memory slots, then wouldn't it be possible to have 16GB as the max RAM with 8GB card in each slot.
HDD = 750GB but later would I be able to upgrade to a SSD Harddisk or not, to reduce the weight even more later.
Keyboard: Is the keyboard SPILLPROOF and Backlit?
Model 2:
Portege Z935-ST3N02
Link for Datasheet: http://cdgenp01.csd.toshiba.com/content/product/pdf_files/detailed_specs/portege_Z935-ST3N02.pdf
Max RAM is only 6GB (is there a way to upgrade to 8GB)
SSD: Can I later upgrade to a higher capacity SSD like 512GB if an when they get cheaper, I know it should be possible but wanted to ask anyhow?
Model 3:
I am comparing these 2 models against THINKPAD X230.
Any suggestions and enlightening thoughts on my above questions would be deeply appreciated.

Please just let me know if the screen can be tilted to 180 degrees in Portege R935-ST3N02

Looking for source for cover for MacBook Pro Model 1226?

Having hard time trying to find cover for the above model... this is the Intel Duo Core aluminum body with silver keys... I've looked on Ebay and Amazon... the most of what I've found is for the 1286 model... any suggestions?

http://www.macbook-case.com/pg.asp?ci=148796&cn=MacBook-Pro-28old-model-29-Cases -2D15-22

Looking for expert who can highlight 3d model node in adobe reader with external program

I need to select and highlight 3d model node in adobe reader with my program.from outside of adobe reader. it seems there is no out-of-box API in stndard SDK. I want to outsource this task fully or partly. If you have the solution or able to provide consultant in this area, please send message to me.

You would indeed need a plug-in to actually select and highlight but you can easily call attention to a part by temporarily changing the color via JavaScript which you can access from external applications.
I can provide more specific advice if you explain the exact user interaction you're looking for. Is this a desktop application? Is the PDF in a browser? etc.
J-

Looking for LabView driver for Suruga-Seiki motorized stage controller model D70

I'm Looking for LabView driver for Suruga-Seiki (Japan)motorized stage controller model D70, GPIB or RS232 (optional model D92).

Hi,
Unfortunately, I was unable to locate a driver for your instrument. I would like you to submit a request for this driver at: http://zone.ni.com/idnet97.nsf/instrumentdriverrequest/ and with the instrument manufacturer. We develop drivers based on demand and popularity so the more requests we have for it, the greater the possibility that we will develop one.
If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would s
uggest contacting one of the Alliance members at:
http://www.ni.com/alliance
An instrument driver is a collection of functions that implement the commands necessary to perform the instrument�s operations. In short, someone read the instrument user manual and implemented some of the functionality in a program for the end user. Instrument drivers are not necessary to use your instrument. They are merely time savers to help you develop your project so you do not need to study the manual before writing a program.
There are example VI's in LV on Instrument Connectivity. If you go to the Help menu >> Examples.. >> I/O, you will see a couple and Examples.. >> Fundamentals for File and String manipulation. I would suggest tweaking them to suit your application. Also the specific command that your instrument responds to can be found from it's manual.
Some useful resources for your application are
ni.com > NI Developer Zone > Development Library > Instrument Connectivity
http:/
/search.ni.com/?col=alldocs&layout=TechResources&ql=a , to search examples and knowledge bases
Hope this helps!
Best Regards,
Aaron K.
Application Engineer
National Instruments

Looking for Dynamic IDM Scoping Model Examples

I'm looking for some good white papers, books or blogs on designing organizational scoping models for IDM. Primaryly I'm looking for examples in the area of:
* Dynamic User Scoping
* Converting Matrix organizations into IDM Scoping Model
* Converting Fluid organization Structures into an IDM Scoping Model.
What I would like to see is the problem statement, the logic used to create the final IDM design, and the supporting workflow and rules used to support the final design.
Because I have asked for the moon, I might as well ask for the rest of the planet system -- I would love have a working model to load and play with.
Thanks

I'm looking for some good white papers, books or blogs on designing organizational scoping models for IDM. Primaryly I'm looking for examples in the area of:
* Dynamic User Scoping
* Converting Matrix organizations into IDM Scoping Model
* Converting Fluid organization Structures into an IDM Scoping Model.
What I would like to see is the problem statement, the logic used to create the final IDM design, and the supporting workflow and rules used to support the final design.
Because I have asked for the moon, I might as well ask for the rest of the planet system -- I would love have a working model to load and play with.
Thanks

Remote opportunity, Looking for assistance in programming a transfer function model

Hello,
Please see attached transfer function model. I am looking for assistance in programming in Labview 2014. Inputs are coming through cRIO and into the model and the model is determining the value of certain outputs being sent back to the cRIO, please PM if you are interested and we can discuss in more detail. Thanks!

Hello,
I could help as I've done this sort of thing for many of my clients. Let me know what you would like done.
Thanks.

Looking for eMac: How To Differentiate Between Models Document

Hello,
I have been trying to find an Apple help document about how to differentiate between eMac models.
I have found an article about iMacs, but can not seem to find one for eMacs. Here is a link to the iMac article, just so you can better understand exactly what I've been looking for:
http://docs.info.apple.com/article.html?artnum=58669
Does anybody know of a direct link to a similar article for all eMac machines? That would be amazing; thank you in advance for any help. =) *april

Hello Dave =)
Thank you for your help and for responding to my post.. The article you posted would have completely solved my problem, however, I, unfortunately, do not have access to serial numbers, and the serial number is mandatory for identifying eMac models in the article you posted. I appologize for not being more specific about exactly what I need.
You see, I am looking on eBay for a good, used, possibly older eMac for my mom. Unfortunately, nobody puts serial numbers in their eMac listings, so I can not properly identify and price compare different eMacs. eBay sellers only list such things as Model Name, Processor Speed MHz, SDRAM and Hard Drive GB, so I need a list to 'check against' like the iMac document. I am mostly trying to find out which eMac models came with DVD players, and also which ones are AirPort ready and AirPort Extreme enabled etc.
Would you happen to know if there's any such eMac model document?
Thank you again for posting to my question; I do appreciate it. *april
iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM Mac OS X (10.3.9) i love my little bubble computer

Looking for stock 3D models

Similar Messages

Maybe you are looking for