Looking for SunONE Administrator

Here at Xavier University, we are in the process of implementing a new portal (SCT / Luminis), which uses SunONE Calendar and Messaging Server 5.1. Currently, we do not have anyone with expertise on either of these products. The university would like to contract someone with these skills for a full-time position (with the possibility to hire).
If you, or anyone you know is interested in this position, please contact me. Thanks
Erik Ball
[email protected]

Hi Tony,
Thanks for your post.
First, it’s inappropriate to release recruitment information in forum. But as you’re using TFS Server and need the consultant to configure your TFS Server, so I changed this post to
General Discussions type and will keep this post in forum for a week(or two if you need), then I will remove this post to Off-Topic forum or delete this post.
If there’s any issue happened in your TFs 2013 Server, please share the detailed issue information here, our members will try to provide the better response.
Appreciate your cooperation.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Looking for Cisco administration software

Hi.
I am looking for a Cisco software that permit me to restrict and control connections changes for ip phones and pc's to my net 3750 switches or something seemed that I could do in my 3750 switches (I know that I can configue static mac's for each switch port but I have five hundred phones and It is a huge work that I don't want to do). Can anybody say me any idea? I have the problem that users in my office are always changing their phones from their switch ports and this produce an huge administrative effort to have a good net inventary.
Thanks.

The system status box shows the following information:
Active meetings: Shows the number of meetings currently in progress.
Errors: Shows the total number of system errors that are defined as either CRIT or ERROR. If the total number of system errors is 0, a green check is displayed. If the total number of system errors is more than 0, a red cross is displayed. System Troubleshooting the CTMS System."
Warnings: Shows the total number of system errors defined as WARN. If the total number of system errors is 0, a green check is displayed. If the total number of system errors is more than 0, a red cross is displayed. Status: Shows the current state of all system processes. If all system processes are in the RUNNING state, a green check is displayed. If one or more processes are in the STOPPED state, a red check is displayed. System processes are described in "Chapter 6: Monitoring CTMS System Processes."

I'm looking for Discoverer Admin. v. 5

Hi!
I'm looking for Discoverer Administrator and Deskop version 5.1. If anybody know from were I can download this tool, please write.

Hi,
There isn't a Discoverer Administrator/Desktop version 5.1. It was renamed Discoverer Adminstrator/Desktop Edition v9 and is part of the Developer Suite. You can download it from http://www.oracle.com/technology/software/products/discoverer/index.html
Hope that helps,
Rod West

Looking for some best practice regarding Content Administrator access

Hi. I am looking for some best practice or rule of thumb from SAP or from different companies how they address Portal Content Administrator access in Production environment. Basically, our company is implementing portal to work with SAP BW. We are on SP 9. Basically, I am trying to determine if we should have 1-2 Portal Content Administrator in Production with 24/7 access or we should limit them from NOT having this. Can you share with me some ideas of what is right? and what is not?
Should we have access in Production? Or Should we have this access but limited? By the way, our users are allow to Publish BI reports/queries into Production.

Hello Michael,
Refer to this guide about managing initial content in portal.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00bfbf7c-7aa1-2910-6b9e-94f4b1d320e1
Regards
Deb
[Reward Points for helpful answers]

When i try to download firefox i get a popup with user name administrator and looking for apassword

when I try to download firefox I get as far as extracting then I get a popup saying that I may not have the necessary permission to access all the features of the program I get 2 choices 1 to run the program as the current user 2 I am given user name administrator and it looks for a password.When I try a password I get login failed bad password. When I try to run it as current use it will still not download

SAVE the installer to your hard drive (do not use the "Run" option); save it to your Desktop so that you can find it. When the download is complete, close whatever browser you have open, click or double-click the file you downloaded and see if it installs without a problem.
The downloader is a self-extracting archive and should not need or use 7-zip. I have 7-zip installed on my system and it does not interfere with nor is it used in the Firefox install process. Hopefully, you have not set the downloading of .exe files to be associated with 7-zip.
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Looking for an Introduction documentation for SOLARIS administration

I'm beginner in SOLARIS environment. I�m looking for an overview documentation for SOLARIS administration as like as IBM AIX Redbooks. For example, the "Certification Study Guide" for IBM pSeries is an excellent introduction to AIX environment (485 pages in pdf format). I'm looking for something like that. Do you have an idea?

I found the following book to be more than helpful. If you're willing to spend the dough I can guarantee that it's more than worth it!
http://www.amazon.com/exec/obidos/ASIN/007222598X/qid=1087539512/sr=ka-2/ref=pd_ka_2/104-6613636-3615953

Looking for Administrator password on CE1\J00

I have successfully installed the CE Development System for SAP NW CE7.1 SP3 for MS SQL Server on a VM running XP SP2. I am now attempting to install Additional Components, and the install wizard is asking for the Administrator password for J00 on CE1. I did not set this password during the previous install, and do not know what the default password would be.
Any assistance is greatly appreciated.

Hi Tommy,
Sounds really strange ... deploying applications on SAP's Java server should be impossible without the password of an Administrator user (user with the Administrators role). The same account should be fine for deploying additional components or logging to the portal ... are you sure you were able to deploy applications on CE or did you run them on another server?
As for the accounts during installation: if you selected default mode in the installer it asks for one single password and then it sets that passwords to all of the users in the system (the Java server administrator, database admin and database schema user, ICM's webadm, SecureStore's keyphrase ... all passwords). If you do not remember that password there's a procedure to reset the password for the Java server administrator ... AFAIR it was described somewhere in a SAP note. Do you have access to notes (I guess this means access to Service Marketplace)?
Best regards, dido

SharePoint 2013 "Help Menu" not working (Sorry, the page you're looking for can't be found)

The Built in SharePoint 2013 Help Menu (?) on our Enterprise Farm for both the sites and Central
Admin does not work.
On Central Admin help the error comes back as: "Sorry, the page you're looking for can't be found".
The site collections Help menu gets the error :
"Unfortunately, help seems to be broken...
There aren't any help collections in the current language for the site you're using."
We have installed on all servers in the farm:
December 9, 2014 Cumulative Update for SharePoint Server 2013 package (build 15.0.4675.1000)
as well as the latest SharePoint update KB2768001 1/15/2013.
I have checked:
Get-SPHelpCollection
Title
Name
SharePoint Help
WSSEndUser.1033.15
SharePoint Foundation 2010
WSSEndUser.1033.12
Central Administration Help
WSSCentralAdmin.1033.15
SharePoint Server 2010
OSSEndUser.1033.12
SharePoint Help
OSSEndUser.1033.15
SharePoint Foundation 2010 Central Administration
WSSCentralAdmin.1033.12
Teacher Help
EDUTEACHER.1033.15
Central Administration Help
OSSCentralAdmin.1033.15
Student Help
EDUSTUDENT.1033.15
SharePoint Server 2010 Central Administration
OSSCentralAdmin.1033.12
PerformancePoint Dashboard Designer 2010 Help and How-to
DashboardDesigner.1033.12
The URL for the site collections is https://servername...../_layouts/15/help.aspx?Lcid=1033&Key=HelpHome&ShowNav=true
We are only using Default English (US) language packs.
In the directory of
Directory of C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\HCCab\1033
there are cab files.
There are no pending upgrades on any SharePoint or SQL server, all other SharePoint components are working
normally.
Any ideas or suggestions?
Thanks.
John


I'm interested in getting the local help to work while this is offline, I saw the following in an article, did you do this and it still does not work for you?
"However the help won’t show up in
SharePoint 2013 sites. You need to change the Help Collection item property SharePoint
Version to15 to
make it work."

HI i have tried so many times to import images, both pictures and video from my hard drive to elements 131, and it keeps coming up with the error message " .....has stopped working we are looking for a solution to this problem etc " please help!

After taking days to upload elements 13 I am now having trouble even trying to import my images and videos into the program for editing. Each time I IMPORT files an error message comes up that says " ....has stopped working, we are looking for a solution to the problem and will notify you if a solution is found" I have not been able to edit ANYTHING or even drag files/images to the time line.... is it me? is my computer too slow? surely if it was, then Adobe elements 13 would not have installed in the first place? please someone help me sort this out as I have a deadline to make for a docco! thanks in advance Lyddy

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have an orange line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Looking for a Labview job. Any offers or suggestions?

Hi, everybody!
I wish we had labview.jobs or something. Since we have not yet,
I would appreciate any hints regarding looking for a Labview job,
especially for people with just 1 year of experience,
beside emailing everybody on the NI Alliance list and searching
general purpose job sites.
In case prospective employers read this, my cover letter and resume follow:
Dear Manager:
Thank you for taking time out of your busy schedule.
You will find that my resume which is attached,
outlines why I am an excellent fit for a
position with your company. In addition to my broad
educational background including two Masters degrees
in Electrical Engineering and Physics, numerous
Computer Science courses taken, and ten years of
diverse experience in programming and system
administration and support, I have just finished a
successful control and data acquisition project in
Labview which is also described in my resume.
My experience and background enable me
to master any software development tool and/or
environment very quickly, which makes me a perfect
candidate who can always keep up with the
ever-changing world of computer technologies.
I am looking forward to discussing this opportunity
with you.
Sincerely,
Stanislav Rumega
2000 Goldsworth Valley, Apt. #X-5
Kalamazoo, MI 49008
Telephone: (616) 387-5967
[email protected]
http://free.prohosting.com/~styrum/webresume.shtml
OBJECTIVE:
To obtain a full-time Software Engineer, Developer,
Programmer, or Analyst position after graduation from
Western Michigan University in April 2000. Willing to
consider positions that are usually offered to
candidates with BS degrees too.
SUMMARY:
- Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
HTML, SPARC Assembler;
- Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
- Software: LabVIEW, Maple V, FoxPro, MS Word,
MS Excel, CorelDraw , Internet Explorer, Netscape
Navigator, various utilities and other packages;
- Fluent in English and Russian.
EXPERIENCE:
Teaching/Research Assistant, 1997 - Present
Department of Physics, Western Michigan University,
Kalamazoo, MI
- Taught undergraduate physics labs;
- Graded student papers;
Project:
Developed a control and data acquisition program for
an electron spectrometer system in the WMU accelerator
laboratory. The program was written in LABVIEW.
The project involved controlling and retrieving
data from devices on a CAMAC crate as well as
GPIB (IEEE-488) instruments connected to the system
via a GPIB to CAMAC interface. A computer communicated
with the system via a serial (RS-232) port on the
crate controller.
Engineer/Programmer, 1993-1997
The Association FACTORIAL-SERVICE, Rostov-na-Donu,
Russia
- Supported all the available computer resources and
other equipment (a phone switching system, phones,
faxes, copiers, etc.);
- Selected, purchased, installed, configured all the
hardware and software used at the office;
- Installed and administered a LAN;
- Designed and coded applications;
- Fine-tuned complicated off-the-shelf Accounting and
Sales software which had their own built-in
languages and required programming;
- Trained users;
- Provided translations between English and Russian.
Engineer/Programmer, 1992-1993
Joint Stock Company TRANSINFORM, Moscow, Russia
- Provided some preparatory work and marketing for
the introduction of an X.25 packet-switched
computer network in Rostov-na-Donu, Russia.
Engineer/Programmer, 1991-1992
Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
Moscow, Russia
- Developed a FoxPro application to calculate traffic
accident rates depending on road conditions.
EDUCATION:
Candidate for Master of Arts in Physics,
1997 - Present Western Michigan University,
Kalamazoo, Michigan
Anticipated graduation date: 04/00.
Computer Science GPA: 3.8,
Overall GPA: 3.4 on a 4.0 scale.
Computer Science courses taken:
- Computer Science II (Object-Oriented C++
Programming);
- System Programming Concepts (UNIX, C);
- Computer Organization and Assembly Language
(SPARC);
- Principles of Database Management Systems (SQL,
PL/SQL);
- Data and File Structures (C++);
- Programming in Maple V;
- Programming Languages (Principles of Programming
Languages, Web Programming: HTML, Java).
Awards:
- Dean's List, 1998-1999;
- David Carley Memorial Award, 1998;
- Department Award for Graduate Student Teaching
Effectiveness,1999.
5-yr. Diploma in Radiophysics and Electronics,
an equivalent of an MS in Electrical Engineering,
1991 Rostov State University,
Rostov-na-Donu, Russia
Numerous courses in Mathematics, Physics, and Computer
Science taken.
GPA: 4.7 on a 5.0 scale.
Project: Developed a simulation of a conveyor
multiprocessor system. The program was written
in Pascal.
Awards:
- Received a higher stipend for high academic
achievements every semester, 1984-1987,
1989-1991.
ACTIVITIES:
- Graduate Student Advisory Committee, Member,
1999-2000;
- Association of Information Technology
Professionals, WMU Student Chapter, Member,
1999-2000.
- Volunteer Student Safety Patrol, 1989-1991.
WORK AUTHORIZATION:
Authorized to work in US for 12 months after
graduation, which can be extended for up to
6 years with employer's help through
petitioning for a working visa.
In Canada, an employment authorization (EA) must be
obtained before starting employment.
REFERENCES:
Available upon request.

Forgot to mention - go to any jobs web site and enter LabVIEW as a keyword - for
example, I went to http://www.monster.com/ and found 301 postings.
"John D. Seelbinder" wrote:
> Viewpoint Software Solutions is looking for a software engineer with LabView
> experience:
> http://www.viewpointusa.com/employment.html
>
> FWIW I do not work for, or have a financial interest in Viewpoint Software
> Solutions.
>
> Stanislav Rumega wrote:
>
> > Hi, everybody!
> >
> > I wish we had labview.jobs or something. Since we have not yet,
> > I would appreciate any hints regarding looking for a Labview job,
> > especially for people with just 1 year of experience,
> > beside emailing everybody on the NI Alliance list and searching
> > general purpose job sites.
> >
> > In case prospective employers read this, my cover letter and resume follow:
> >
> > Dear Manager:
> >
> > Thank you for taking time out of your busy schedule.
> > You will find that my resume which is attached,
> > outlines why I am an excellent fit for a
> > position with your company. In addition to my broad
> > educational background including two Masters degrees
> > in Electrical Engineering and Physics, numerous
> > Computer Science courses taken, and ten years of
> > diverse experience in programming and system
> > administration and support, I have just finished a
> > successful control and data acquisition project in
> > Labview which is also described in my resume.
> > My experience and background enable me
> > to master any software development tool and/or
> > environment very quickly, which makes me a perfect
> > candidate who can always keep up with the
> > ever-changing world of computer technologies.
> >
> > I am looking forward to discussing this opportunity
> > with you.
> >
> > Sincerely,
> >
> > Stanislav Rumega
> > 2000 Goldsworth Valley, Apt. #X-5
> > Kalamazoo, MI 49008
> > Telephone: (616) 387-5967
> > [email protected]
> > http://free.prohosting.com/~styrum/webresume.shtml
> >
> > OBJECTIVE:
> > To obtain a full-time Software Engineer, Developer,
> > Programmer, or Analyst position after graduation from
> > Western Michigan University in April 2000. Willing to
> > consider positions that are usually offered to
> > candidates with BS degrees too.
> >
> > SUMMARY:
> > - Languages: G (LabVIEW), Java, C, C++, SQL, PL/SQL,
> > HTML, SPARC Assembler;
> > - Systems: MS-DOS, WINDOWS NT/98/95/3.11, SunOs UNIX;
> > - Software: LabVIEW, Maple V, FoxPro, MS Word,
> > MS Excel, CorelDraw , Internet Explorer, Netscape
> > Navigator, various utilities and other packages;
> > - Fluent in English and Russian.
> >
> > EXPERIENCE:
> >
> > Teaching/Research Assistant, 1997 - Present
> > Department of Physics, Western Michigan University,
> > Kalamazoo, MI
> > - Taught undergraduate physics labs;
> > - Graded student papers;
> >
> > Project:
> > Developed a control and data acquisition program for
> > an electron spectrometer system in the WMU accelerator
> > laboratory. The program was written in LABVIEW.
> > The project involved controlling and retrieving
> > data from devices on a CAMAC crate as well as
> > GPIB (IEEE-488) instruments connected to the system
> > via a GPIB to CAMAC interface. A computer communicated
> > with the system via a serial (RS-232) port on the
> > crate controller.
> >
> > Engineer/Programmer, 1993-1997
> > The Association FACTORIAL-SERVICE, Rostov-na-Donu,
> > Russia
> >
> > - Supported all the available computer resources and
> > other equipment (a phone switching system, phones,
> > faxes, copiers, etc.);
> > - Selected, purchased, installed, configured all the
> > hardware and software used at the office;
> > - Installed and administered a LAN;
> > - Designed and coded applications;
> > - Fine-tuned complicated off-the-shelf Accounting and
> > Sales software which had their own built-in
> > languages and required programming;
> > - Trained users;
> > - Provided translations between English and Russian.
> >
> > Engineer/Programmer, 1992-1993
> > Joint Stock Company TRANSINFORM, Moscow, Russia
> >
> > - Provided some preparatory work and marketing for
> > the introduction of an X.25 packet-switched
> > computer network in Rostov-na-Donu, Russia.
> >
> > Engineer/Programmer, 1991-1992
> > Soviet-British Joint Venture MARINE COMPUTER SYSTEMS,
> > Moscow, Russia
> >
> > - Developed a FoxPro application to calculate traffic
> > accident rates depending on road conditions.
> >
> > EDUCATION:
> >
> > Candidate for Master of Arts in Physics,
> > 1997 - Present Western Michigan University,
> > Kalamazoo, Michigan
> >
> > Anticipated graduation date: 04/00.
> > Computer Science GPA: 3.8,
> > Overall GPA: 3.4 on a 4.0 scale.
> >
> > Computer Science courses taken:
> > - Computer Science II (Object-Oriented C++
> > Programming);
> > - System Programming Concepts (UNIX, C);
> > - Computer Organization and Assembly Language
> > (SPARC);
> > - Principles of Database Management Systems (SQL,
> > PL/SQL);
> > - Data and File Structures (C++);
> > - Programming in Maple V;
> > - Programming Languages (Principles of Programming
> > Languages, Web Programming: HTML, Java).
> >
> > Awards:
> > - Dean's List, 1998-1999;
> > - David Carley Memorial Award, 1998;
> > - Department Award for Graduate Student Teaching
> > Effectiveness,1999.
> >
> > 5-yr. Diploma in Radiophysics and Electronics,
> > an equivalent of an MS in Electrical Engineering,
> > 1991 Rostov State University,
> > Rostov-na-Donu, Russia
> >
> > Numerous courses in Mathematics, Physics, and Computer
> > Science taken.
> > GPA: 4.7 on a 5.0 scale.
> >
> > Project: Developed a simulation of a conveyor
> > multiprocessor system. The program was written
> > in Pascal.
> >
> > Awards:
> > - Received a higher stipend for high academic
> > achievements every semester, 1984-1987,
> > 1989-1991.
> >
> > ACTIVITIES:
> > - Graduate Student Advisory Committee, Member,
> > 1999-2000;
> > - Association of Information Technology
> > Professionals, WMU Student Chapter, Member,
> > 1999-2000.
> > - Volunteer Student Safety Patrol, 1989-1991.
> >
> > WORK AUTHORIZATION:
> > Authorized to work in US for 12 months after
> > graduation, which can be extended for up to
> > 6 years with employer's help through
> > petitioning for a working visa.
> > In Canada, an employment authorization (EA) must be
> > obtained before starting employment.
> >
> > REFERENCES:
> > Available upon request.

Looking for a password

looking for a password for peach willow guest can you help......please

are you the owner of the network called peach willow?
if you are, you may read the instructions in this link on how to connect to your guest network.
if you are not the owner, you may ask the administrator of that network to get the password.

Looking for a pager with advanced functionalities

Hello everyone,
I am looking for a pager with which I could put custom icons for the different workspaces.
I have an HTPC that is mainly used for three things: watching movies, playing music and browsing the internet. Therefore, I would like to have four workspaces, one for each of these and another one for administration. Since this is an HTPC, I'd like it to look good and I think it would be neat to have images instead of numbers/squares for the workspaces: a movie reel for the "movies" workspace, a note for "music", etc... I have been looking at pagers on the wiki, but most of the links are broken. I am currently running XFCE, but would install another WM for this. The idea came to me because I could do this on awesome 3, which is installed on my laptop, but my roommates are firmly opposed to a tiling WM on the HTPC.
If anybody can provide suggestions, they will be very welcome.
Cheers,
François

Howdy-ha- flamirande. I don't want to be a total prick, as it's not my place; it's yours. Xfwm or Awesome will get the job done, won't it? You might be able to wow them if you get a universal remote and set up a proper lirc connection, letting them sit on the couch and have the power at the press of a finger. I have some friends with XBMC (the real thing--a dedicated, old-school Xbox hacked with BSD for all their media), and they're more satisfied with the results it provides than how it looks. Yeah, their Win and Mac PCs (both my friends' and your roomates') give them Facebook and YouTube, but yours gives them music, movies and tv and internet on demand, at a smaller resource cost and with a more versatile core and interface. If they're so touchy about polish, let them figure it out. I'm not just saying this as the sorry excuse for a computer geek that I am, but also as a person who's been dealing with many roommates for roughly a decade. I mean I don't know your situation but what do they think, the setup you give 'em is supposed to get them attention?
If these folks can't be satisfied by the fact that your system can provide them with a reliable, versatile, centralized, kick-ass setup that theirs can't, well...
More constructively: If they just won't have it...maybe openbox and tint2? You've got a low ram and cpu demand there, keeping music from skipping and video from tearing, if you work it out properly. Openbox has always been my choice for the right balance between polish and minimalism.

Looking for a way to export full Popularity Trends data

Greetings!
I'm looking for a way to access all "popularity trends" data for a SharePoint 2013 publishing site in one place. I'm probably missing something pretty basic here, (I hope), but it seems if I pull up popularity trends for the site, all I get is
the hits & unique users for the site as a whole. If I go into my pages library and choose "Most Popular Items," I'm given a search results page that I can't run reports from. And if I select the "popularity trends" link under one of
those search results, I get a usage report for a single, specific page.
I've thought about doing a multi-select of pages from my site's Pages library, but I have more than 100 pages in the site, so I still can't get at everything all at once. Plus, the resulting usage.xlsx file just includes a lot of reports on individual
pages.
There's got to be something more all-encompassing than this...right?
Help!

Hi,
According to your post, my understanding is that you wanted to see the all popularity trends data for a site.
Where did you export the usage report?
Did you export the report from Popularity and Search Reports?
To view the Popularity Trends report for a site collection
Verify that the user account that is performing this procedure is a member of the Owners group.
In the site collection, on the Settings menu, click Site ettings.
On the Site Settings page, in the Site Collection Administration section, click Popularity and Search Reports.
On the View Usage Reports page, in the Usage Reports section, click Usage.
In the message box, click Open to open the report in Excel, or click Save or Save as to save the report.
Click the tabs to view the usage report for the different usage event types.
http://technet.microsoft.com/en-us/library/jj715890(v=office.15).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Looking for OD only binding script

Hello everyone,
after several weeks of trying different solutions we are stuck with trusted binding / OD binding in Deploy Studio.
We've added several workstations to our computers and they are renamed by a script this works fine.
The problem is that we have to add those workstations to our Open Directory and then add those workstations via OD to several groups.
The workstation is binded but it doesn't bind correctly.
We can see the OD server in the "Users and Groups" as "connected". But it's only bound locally (can only be seen on the workstation)
But it's not binded as we want it to be.
Our goal is that the workstation needs access to the directory (System Preferences -> Accounts -> Login Options -> Network Account Server -> Open Directory Access… --> LDAPv3 ...)
And then we have to use "Edit..."-> "bind" .After that the workstation is added to our OD and we can see it in our workgroup manager and add this workstation to the group.
Is it possible to solve this issue with Deploy Studio?
We've already tried to use "Enable trusted binding" but after imaging a workstation there is only the ouput "An error occured while trying to establish a trusted binding with the server "xxxxx",new attempt in 10 seconds..." and "Invalid credentials supplied for binding to the server" in the finalize script and the workstation has to be bound to the OD manually.
But the credentials are 100% correct.We are using the login of your OD-administrator account for the trusted binding.
We've also tried to activate trusted binding without any login information in the fields for "Directory Admin", after that there is no error but the workstation has to be bound manually again.
It would be great if there is anybody who has the same issue and maybe solved it or has any idea what to do here.
Sorry if the english description for several "buttons" aren't exactly,we are using a german version of MAC OS X (10.8.2). I hope everything is easy to understand.
Just tell me if you need any additional information about things.
DPS Version: 1.0 RC 135 (121112)
Kind regards
This is my post in the official DPS forums but there wasn't any reply except one that we could use an own OD binding script.
Is there anybody who has a working script?I found one but it has AD inside and I don't know if it's that easy to delete the AD parts from this script.
It would be great if there is someone who could help with this issue.
Kind regards

We're still looking for a solution for this issue as it still doesn't work.
We also tried to solve it with this script but it didn't work either:
#!/bin/bash
computerid=`scutil –get ComputerName`
dsconfigldap -v -f -a OD_SERVER -n OD_SERVER -c $computerid -u ADMIN_USERNAME -p ‘ADMIN_PASSWORD’
sleep 10
dscl /Search -create / SearchPolicy CSPSearchPath
dscl /Search -append / CSPSearchPath /LDAPv3/OD_SERVER
sleep 10
dscl /Search/Contacts -create / SearchPolicy CSPSearchPath
dscl /Search/Contacts -append / CSPSearchPath /LDAPv3/OD_SERVEROD_SERVER= FQDN of our OpenDirectory
ADMIN_USERNAME= account used for binding computers manually
ADMIN_PASSWORD= password for ADMIN_USERNAME
It would be great if there is somebody who could help us with this issue.
Kind regards

Looking for a WebLogic Admin for a client in the Miami, FL area


We are currently looking for a WebLogic Admin for a client in the Miami, FL area (Permanent position)
This right candidate must have experience with the following technical skill sets:
· Extensive experience with WebLogic and SQL Server
· Solid expertise as WebLogic Administrator | Web Administrator | Java Developer
· Strong experience in Web hosting infrastructure
· Experience in WebLogic installation, configuration, and tuning;
· Performed application deployments and diagnosing performance related issues with WebLogic;
· Worked with BEA/Oracle WebLogic Technical Support in resolving the critical issues by analyzing the logs and config files and follow up on the open incidents;
· Extensive experience in WebLogic Administration, monitoring and troubleshooting;
· Ability to analyze the results of monitoring systems to identify problem areas;
· Experience in writing WLST scripts for deployment, start and stop servers;
· Solid experience using Java, doing systems maintenance or new functionality development
· Worked closely with development and testing teams to implement fixes in Production under strict time constraints;
· Involved in troubleshooting for production issues and escalating as per the requirement;
· Experience in writing scripts to handle complex automation / administration;
Some Preferred Experience:

· Past experience in the financial sector would be preferred


If you are interested, know anyone or have any questions please feel free to call or email me at (561) 745-6945 or [email protected]


Thanks in advance,
Bob Kelly


FYI. Forums abuse has been reported.
:Rob:

Looking for SunONE Administrator

Similar Messages

Maybe you are looking for