Looking for T1 T2 memory command ?(K8N NEO2 Platinum NFORCE ULTRA)

Is there a way to access the T1 T2 memory command on my board? its not in the bios..... THX

Quote from: Gh0sT on 30-April-06, 05:50:27
Live update using a floppy....this is my 3rd MSI board and ive done the same on all with never a problem to date...I just thought the 1.80 was new enough to have all the changes...excect the usb 2.0 update...
SanDiego 3700 is fully supported from 1.B , thats why 1T/2T isn't coming up as a choice if using an older one (2T is set as default) .
Other than that the 3700 runs fine with 180 .
Edit:
Btw 1C bios isn't offered via liveupdate (only 1B).
If you wan't 1C based BIOS you have to get it manually and flash manually with your own made boot bios disk of winflash 1.76 .

Similar Messages

PC Perspective #1 Leaderboard entry MSI K8N Neo2 Platinum nForce3 Ultra

PC Perspective...ala AMDMB.com has the top to rated pc builds using the MSI K8N Neo2 Platinum nForce3 Ultra.
Whooohooo
PC Perspective
I like Ryan's picks. By the way AMDMB does rock...fantastic forums great info on mobo's not just AMD either.

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

SATA RAID problem on K8N Neo2 Platinum (nForce3 ultra) & winXP x64

I entered on MSI driver dowload page, put my model, and i found out that the RAID driver for win x64 wasn't released (nforce3 ultra), but in the same page was the driver for the nforce4, so I supposed it was compatible. I made the driver disk. press F6 and he askme for the drivers, ok, i introduce BOTH drivers, he detects perefctly the SATA RAID (stripping) format the disk, copy the files and ask me for some .CATof teh raid driver that wasn't on the zip file.... omit files, reboots, completes the instalation, but on the first boot of win x64 when it's just about to show the windows screen, a bue windows, and resets the pc so fast that's unreadable. fail safe start.. same crash.
I Installed win on an IDE and it run prefectly... In th other hand... without installing any driver the windows instalation recognices the SATA drives, but not the RAID. Maybe I just got to install the raid driver but not the SATA driver... the nforce3 driver form nvidia.com is pretty old... The real funny is that when i installed winXp x64 BETA i hadn' any problem... (winXP 64 doesn't admit the 32 bit driver=
Which driver i'm supposed to install? to INSTALL winxp64 on a SATA RAID and make it boot from there?
Thaks a lot

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

Passive cooler for mobo chipset on MSI K8N Neo2 Platinum

One of my customers has this motherboard, which has a noisy motherboard chipset fan. I would prefer to replace it with a passive cooler if possible. Does anyone have any opinions on this and/or recommendations for compatible products I could go for?

Look here for suggestion:
https://forum-en.msi.com/index.php?topic=98720.msg777240#msg777240
http://www.newegg.com/Product/Product.asp?Item=N82E16835109131
https://forum-en.msi.com/index.php?topic=69147.0
http://www.pcsilent.de/showProduct.do?id=revnbbl&lastAction=showProduct&locale=de&

K8N Neo2 Platinum & 6800GT/Ultra question...

OK, my rig is in my sig and I no some ppl have issues with 6800 + Neo2 plat.
I have the 6200 softmodded to a 6600, does that mean if I want to upgrade to a 6800 I wouldnt have issues or is there stil a big chance?
Thats all.
Thanks for any reply's
J0hn

6800GT offer much better value and will O/C to Ultra stock speeds or more. Your using AGP and over here (UK) AGP 6800GT have just come down in price. You can pick them up (stock 256DDR) from £215 -/+ £235, Ultra's £295 -/+ £350 (7800 have forced the drop). But not in PCI-E though just AGP which is wired as it looks like PCI-E users are getting a raw deal, as PCI-E just offers SLI over AGP at present. No game has used the bandwith that AGP X8 offers. So PCI-E has no real advantage (SLI only) I upgraded to a new spec, 3 weeks ago and when for the 6600GT due the cost performance. Its about what you want to play and how long you intend/wish to use the card. If your running games 1280x1024 - 1600x1200 + then the 6800GT will give you good/better frame rates (than a 6600GT). Below 1280 1024 the 6800GT offers a bit more over the 6600GT (depending on app/game) but @ a cost. At the end of the day its really about how often you can aford buy a new card. Twice a year @ £200-300 + ???? or once every year or 2. My old 4200TI runs all the games I play not always at high res/frame rates but there playable and this is 3 years old +. Just until BF2 came out the card anit got the tech to play it so speed/power is good but only until a game comes out the card can't support !
6800GT gets my vote, I could have got an 6800GT but got 6600GT so I could buy an extra 1GB of ram. I just love the tast switching speed and amount of apps this lets me run.

System suddenly won't power on (MSI K8N NEO2 PLATINUM NFORCE3)

System specs are
COOLERMASTER TAC-T01 WAVE MASTER ALUMINUM ATX 4X5.25 1X3.5 4X3.5INT case
MSI K8N NEO2 PLATINUM NFORCE3 ULTRA S939 AGP 5PCI SATA 1394 SOUND 1000LAN
KINGSTON HYPERX 1024MB DUAL CHANNEL KIT PC3500 2X512MB DDR 433MHZ 184PIN
ATI Radeon X800XT PE AGP
SEAGATE BARRACUDA 7200.7 200GB SATA 8MB 7200RPM 8.5MS OEM
CREATIVE SOUND BLASTER AUDIGY 2 ZS 7.1 1394 PCI RETAIL BOX
LITEON 16X DVD-ROM INT E-IDE RETAIl
MITSUMI FA404A 7-IN-1 FLOPPY DRIVE & FLASH READER CF/SM/SD/MMC/MS
LG 4163b dvd burner
Nothing has ever been overclocked on this system.
Everything is plugged into a Belkin Surgemaster powerbar.
I haven't mentioned the power supply. I'll get to that. I have been using an ANTEC NEOPOWER 480W POWER SUPPLY (ATX12V DUAL 12V RAILS ACTIVE PFC W/ DETACHABLE OUTPUT CABLES) for about a year on this system without
any issues. One morning, I wake up, hit the power button on my coolermaster case, and nothing happens.
CPU fan won't even spin. Nothing happens.
O.k., blown power supply, I think . . . .
So I take out my Antec and put it in another system. That system turns on
without any problems.
Hmm . . .
I come here, and I read posts about
potential compatibility issues with Antec power supplies. But if it's a compatibility
issue why was my system working for about a year?
O.k., fine. I'll buy a Enermax 535W EG565P-VE FMA 24P (115/230 VAC) power supply.
I just plug it into the mainboard (nothing else). Hit the power button . . .
The CPU fan spins for half a second, and then nothing.
Did my motherboard just suddenly die for no reason?
Any suggestions?

Pull the AC plug from PSU and set cmos in clear position with battery removed for atlest 20 minutes perhaps longer .
Then try to post the system barebone .
Just cpu,1 pcs memory in slot 1 , gfx card , and keyboard in PS2.
No usb devices at all including card reader and no pci cards harddisks or cdoms/dvd/floppy.
It could also be caused by a short or a malfunctioning fan connected to mobo.
Try to disconnect all case fans from mobo headers if you have any connected to additional fan holders.
The chipset fan can also be disconnected momentarily just to see if it posts.
If none of this helps , replace cmos battery and try again .

K8N Neo2 Platinum - satisfied except cold boot

My new build is doing well except for the near-famous cold-boot problem. When the box has been off for a while, I hit the power button, fans & drives spin up, the optical blinks a couple times, but no video or POST. The LEDs look like 4 green, but 2 seem dimmer, as if they're just reflecting the light from the other 2. A 5-second hiit on the power button shuts it down, hit it again and it fires right up, but stops during post with the message that it's in safe mode and to reset my (nonexistent) OCs. From this point I can F1, boot up, and run for hours. No probs unless it's off for a while. I have seen the problem since early in the build, when I powered up outside the case with just 1 stick of RAM and the LEDs (no vid or drives).
Searching the board shows a lot of people having the problem, but nobody seems to have a solution, so I went to the support site to check the knowledge-base and FAQs. Interesting to find there that A64 boards do not appear to exist. No FAQ, no option to spec socket 939 or 754 to search the KB.
Maybe if we get a number of us with the problem to post specs & observations in one thread we can spot a pattern?
I have noted that I can't just do an on-off-on. It has to spend 20-30 seconds in the lockup mode before cycling the power results in a successful boot.
BTW all, some really nice things are happening with RAM prices lately. I got my 2 gigs for US$190 delivered.
K8N Neo2 Platinum
Athlon64 3500 (130 nm)
2G (4 x 512) SuperTalent PC3200 RAM
2 120G Maxtor SATA (1 & 2) in raid0
1 160G Seagate SATA (3)
1 Sony DRU 720A 16X dual-layer DVD +/- R/RW (primary master)
PNY Verto nVidia 6800 vid
Mad Dog 600W PSU (30A on +12)

Quote from: elliott on 13-April-05, 09:23:05
I'll give the bios a shot, but the idea of using the HT to slow the box down and then speeding it back up again in Winders...
Putting HT to 4 does not slow down the box... Especially if ur FSB is over 200 (if ur overclocking) like in my case: FSB=260mhz, I must put down the HT to 4 in order to run everything perfect. HT standard is 200x5=1000, in my case its 260x4=1040... as long as HT is between 800-1200... I believe there is no real time performance loss as long as u have STABILITY. I have seen a lotta people in this forum fixing stability problems just by reducing the HT when they overclocking... some cases even to HT=3.

News - BIG PROBLEM - MSI K8N Neo2 Platinum - DOES NOT POWER!!!

Hi to everyone.
I'm a proudly owner of a MSI K8N Neo2 Platinum that in one year gave me no problem until yesterday morning.
I used the computer in the night before and when I finished I turned it off and I went to bed.
Yesterday morning I found the power led blinking (like if the system was in standby), and there was no way to turn the PC on.
I even took off the battery for more than 12 hours and I left only minimal components installed:
the video card (Gainward GeForce 6800),
the psu (Antec TruePower 550W),
1 x 512 MB Ram Crucial Ballistix,
and I checked them into another computer and they work perfectly.
I tried shorting the MB power switch pins with a screwdriver and I've even tried to power on the system without the Memory or the Video Card... I've tried everything that came across my mind with no efforts!!!!
Every time I give power to the MB appens only that the power led starts blinking, but pressing the button the PC doesn't turn on.
PLEASE HELP ME... I really don't know what else to do!!!
Thanks,
Alberto

Quote from: alberto_melita on 20-August-05, 20:14:56
Hi thanks for the answers.
I do have a D-Bracket, but my problem is not that the system does not boot or does not post... my system DOES NOT POWER ON (!!!!), so d-bracket is useless!
When I plug the system power the only thing that happens is that the power led starts blinking (with the system still in soft-off), and if I press the power switch button nothing happens!
I've the bios for 7025 v1.8 and the settings where for OFF on power-loss ond pressing the button (can't rememeber if it was more than 4 sec) was meant to turn off the computer, but considering that I un-powered the pc more than once without the MB battery the settings should be factory default by now.
I went through the Windows-XP shut-down system, and i could not be an electrical problem as I always used the PC with a pretty good UPS unit.
Right now these are the full specs of my sytem:
- MB MSI K8N Neo2 Platinum nForce3 Ultra
- GAINWARD 6800 2600 GLH 256 MB Ram
- PSU Antec TruPower 550 W
- CPU AMD64 3500+ core Winchester @11*210 Mhz (this cpu has never overclocked very well)
- HEATSINK Thermalright XP-90 with a 12 Cm Enermax Fan (CPU temp in always below 55 °C when stressed)
- 1 x 512 Mb RAM Crucial Ballistix DDR400 optimized for MSI K8N Neo2 Platinum
I left only these things inside my computer in the hope that it would turn on... it did not work. I tested each component but the MB, and they work perfectly.
Again...
Thanks for you efforts, any help will be appreciated.
Alberto.
All parts have been tested: CPU/RAM/GFX/PSU/HD/DVD, just not the MOBO ?
Checked if the MOBO is shorting in the case ?
Have you tried using the reset switch as power, on/off switch ? I've seen before when the power switch stops working (lose/bad wire busted spring) after swapping reset to power, then the system turned on. Worth a try, as sending it back to USA won't be cheap. If its over 1 year old it mite not be covered by the re-seller and or MSI. Best to check this out as law and warranty is different from country to country.
Good Luck

Want comments on k8n neo2 platinum prior to buying it,

hi people.
im doing some research prior to buyng an amd64 motherboard and have been looking at this one.
MSI K8N NEO2 Platinum-54G Moderkort S939 nForce3 250Ultra,SATA,GbLAN,ATX,Dual-DDR
is the firewall good or bad ?
is the motherboard easy to work with ?
stable ?
anyone tried the new 3000+ and 3200+ on it ?
i would also want end user comments on it.
Good Night.
EDIT:
im going to most of the hardware found in my signature.
if the psu aint up to it i will use a second psu until i get money to buy a bigger one.

Hi Raven, missed this thread till now!! Congrats soon getting S-939 A64, that will be way less than 10lb shipping charge to mail you
My MSI K8N Neo2 NF3 250 Ultra has been stable from BIOS v1.0 upwards, no mis-fires, no overheats, no comm/USB/PS2 probs, smooth all the way, for me. Per reviews Gigabyte and Asus also good, MSI won Bmarks on reviewers reference boards.
Peeps reporting probs with board here though, so check out this nVidia section. The BIOS updates helped some.
-Zalman CNPS7000_ Al/Cu HSF screws right into the original backplate, keeps my FX53 at 34C Folding.
-CNPS7000A or B are good, peeps say ya' need to use the backplate came with the HSF. The mobo backplate comes off pretty easy. Edit: re Hansh's mod Zalmans.
-The stock AMD fan is fine at stock or low OC.
-No HSF install pix I've seen, even the monster TT heatpipe cooler, have interfered with RAM, but there's always an exception.
-Your Antec is prolly good enough, AMD rec's a reputable 350W or better. CPU uses ~90W (98?) Like ya say, if it isn't you always have the other one too
-NB fan is small but works well so far. It's noise doesn't compete with the other 8 fans
ps: Software only prob, Win XP doesn't like RAID 5 PCI cards at install.
=--
Hansh, Allreet!

IS my MSI K8N Neo2 Platinum FRIED!??

Ok I am assembling my first computer right now. I have the Motherboard (msi K8N Neo2 Platinum nForce 3 Ultra Socket 939) a gig of corsair pc3200 RAM, a Samsung 7200RPM hardrive, a Samsung DOuble layer CD/DVD burner, 5 fans, and AMD Athlon 64 3500+ (NCC). But when I plug everything into the motherboard, all the fans start spinning everything looks like its ine except the IDE ports. My CD-ROM wont go on and I just got it! everything is new out of the box. I have a single drive, the IDE ribbon conecting from the motherboard, then the master connecting to the CD-ROM. The jumper is still in there. The "system part" of the IDE ribbon is plugged into the IDE-1 on the motherboard. And my harddrive is SATA, when I plug that in, it doesnt look like its working either! All my power cables are fine because when I plug them into the fans they work...any suggestions?

Yapyap,
would have been nice to post solution.
Drop Ht from 5 to 4 in bios - cell menu as soon as you can get into bios.
How to clear the CMOS
1) disconnect the power cable.
2) push the power button to drain the capacitors
3) Move the CMOS jumper to the clear position, from it's original 1-2 position to 2-3
4) Wait a minute to be sure the CMOS has been cleared. Take your Time
5) Return the CMOS jumper to it's original position 1-2
6) Plug in power cable.
7)restart computer
8) enter bios and select load optimized Bios defaults - save & exit
9) let pc reboot, if you have any settings you want changing do them now.
like HT Settings hard disk boot order etc.,
10) hopefully youll boot

K8N Neo2 Platinum Ordered - Advice for a noob please

Hi there,
this seems like a great forum, was hoping someone could give me some advice - Im trying to pre-empt any major probs....
I am a relative noob to building P.C's - done a few P4 based systems before but this will be my first Athlon based. This systems primary use will be gaming. I have the following on order (should be with me next week) : -
a) MSI K8N NEO2 Platinum Edition SCK 939 Motherboad
b) AMD ATHLON 64 3500+ 64bit SCK 939 Retail Inc Fan
c) 160GB Maxtor Calypso 8mb Cache 7200 SATA DHH
Components I have already
a) Graphics Card - Nvidia 6800 GT
b) Memory - Generic 2 X 512MB PC2700 DDR333 RAM
c) Sound Card - Creative SB Live Value
d) PSU - Jeantech 450W (22a on 12V Rail)
e) Case - pretty generic full tower case - no fans attached
f) CPU FAN - COOLERMASTER HYPER 48 SUPER SILENT HEATPIPE
g) Spare Hard drive - 120GB Maxtor IDE Hard drive
h) DVD Drives - 1 x Pioneeer 108 / 1 x Pioneer 104
I) Monitors - Ilyama 17" TFT & Toshiba 32WL36P LCD
I have some 'noobish' questions - apologies for my ignorance : -
1) Memory - Will my memory be okay ? Should I ditch it and buy some Corsair DDR400 (which everyone else seems to have!). Will performance suffer if I stick with the DDR 333 ? Do I need to adjust settings in BIOS regarding memory timing ? (I only picked up on this from reading through other posts on this board, and am totally clueless on 'timing'- Ive never needed to adjust timing on any previous PC's....!)
2) Sound Card - will I be better off sticking with the onboard sound on the MSI K8N neo 2 ? Or for best performance do I go with the SB LIve ? (god its a nightmare trying to get updated drivers for this card), Would I get a noticable performance increase buying an Audigy 2?
3) Vcore / other power issues - Reading this forum Im kinda scared by many posts along the lines of "..for stability I need to change my memory voltage to xx-V" or "...for a stable system I needed to change my Vcore to xx-V". Will I need to change the Bios default values on this system just to get it to run stably??
4) CPU FAN - Are AMD stock fans any good ? My Hyper 48 is quite highly rated....
5) Im completely new to SATA drives, but Ive printed off the very useful install guide on this site (which I intend to use). Is there anything I need to look out for concerning adding my IDE drive also.
I think thats about it just now - if anyone can see any other potential problems with my specs then please let me know. Im really not trying to be negative / pessimistic - after all the reason I have went for this motherboard is that it is rated as one of the best. Im just a bit paranoid that the dreaded B.S.O.D awaits me!
On a more positive note - does anyone have similar system specs they use for gaming ? How well does HL2 / Doom3 / Farcry etc fly J ? I cant wait !
Thanks for the time

you may find these helpful
Overclockers Uk Power Supplies
This Week Only Enermax Noisetaker 485W EG495AX-VE(G) SFMA ATX2.0 PSU (CA-007-EN) Might be tempting
Scan International Power Supply

Which power supply for k8n neo2 Platinum

I need to buy a new power supply for my computer. With the ATX12V v2.2 standard and ATX12V 2.01 and the "no -5v on new psu's" issue I'm at a loss as to what to look for. I have looked and cannot find what "standard" (is that even the correct term?) the k8n neo2 supports.
My main requirement is that the psu be 550-650 watts and have modular cables. I know someday I will have to upgrade my system to PCI-E and modern components, so I would like a PSU that would work now and in the future.
Could someone point me in the right direction?
Many thanks
system spec's
Motherboard- MSI K8N Neo2 Platinum
CPU- AMD Athlon 64 X2 Dual core 4800 939 socket
Memory-CORSAIR 2X1G Twinx2048
Video- ATI HIS 4670 1GB AGP
HD- Seagate 100 gb 7200 rpm
Drives CD-DVD and CD-RW
PSU- Ultra X Connect 500W ATX
Sound- Creative SB Audigy2 Gamer
OS- WinXP Home SP3 32 bit

Why do you need 550-650W or is that just because of future needs? I would suggest one of the Corsair +12V single rail modular PSU's if you insist on the modular design. Check newegg for what they have for modular in the Corsair lineup. I'm sure you're aware that their price is considerably higher than the non-modular. K8 MB's that needed -5V are the early ones that had Creative Sound Blaster onboard audio.
HX650
   * Was: $139.99
   * $109.99
   * After $10.00 Rebate
   * $10.18 Shipping
That's what it is now but if you don't need it in a big hurry you can probably wait a while and get for the same price but with free shipping.
Edit: Gee, Ultra with blown caps, I just happen to have a xPRO 800W that blew some caps, repaired it and started going bad again and then got my TX650 to replace it. Got it for $70 after rebate (which I haven't received yet) by waiting for the right price, rebate and free shipping. VX550 would have been good enough but at the time I got the TX650 at a lower price.

Is this RAM ok for a K8N NEO2 Platinum

I am currently building a system and have got my FX-53 and K8N NEO2 Platinum but i have hit a problem in that i dont know what memory to get for it i have been looking at this http://www.komplett.co.uk/k/ki.asp?sku=116120&cks=PRL
or if this is no good could some one recommned me one perhaps from this list
http://www.komplett.co.uk/k/kl.asp?bn=10529

If you know very little about memory, then what it IS telling you, you won't understand. Here's a tip....on the offset, don't spend a lot of money on memory just yet. Purchase some PC3200, like Kingston KVR RAM or Kingmax...something relatively inexpensive...until you begin to understand timings and voltage adjustments. You will not have any problems with this type of memory, and usually...initial boot-up goes very smoothly.
Then, after you start to play with timings and such...when you begin to feel comfortable with making these adjustments, and you know your system is stable....then you could experiment with higher-performance RAM.
That's just how I do it..as I am conservative when first assembling a computer!
Tim186...."Welcome" to the MSI Forum. Also, check out RexB's 939 build thread...you will find good information in that!!!!

K8N-Neo2 Platinum pauses for 25 sec at boot, nvatabus.sys the problem?

All,
After POSTing normally and starting to load Windows XP, my system halts at the Windows XP splash screen for about 25 seconds. Nothing happens, no disk activity or anything, the system just sits there.
I used Microsoft's Bootvis utility to see what was happening. It turns out that the nvatabus.sys driver consumes 100% CPU at boot for 25 seconds then the system continues to boot normally. Does anyone else see anything like this?
I am running the latest nForce drivers from MSI. The driver in question:
NVIDIA nForce3 Serial ATA Controller 2.6
Driver Date 6/3/2004
c:\WINDOWS\System32\DRIVERS\nvatabus.sys 5.10.2600.0446
Windows XP SP1
I have a RAID1 of two 160 GB SATA drives. The mirror is healthy and working fine.
After booting the system is rock-solid stable, no problems there. It's just this unexplained pause at boot. Does anyone have any ideas how to fix this?

ok check it out guy's this thing drove me insane all night last night and most of today. I was ready to return everything and give up. But alas all is not lost. Here is the rundown on what i just did.
My Equipment:
Athlon 64 3800+(w/ stock fan)
MSI K8N Neo2 Platinum Socket 939
2X512 Corsair TWINX1024-3200XLPRO ( with the cool led's )
2 SATA HD (1 Maxtor Diamond10 300 GB w/ 16mb cache, 1 Segate 160GB w/8mb cache)
PP&C 425 ATX Deluxe
Radeon 9700 Pro ( cat 4.8 )
Audigy2 ZS
Sony Floppy
Sony 8x52x52x32 DVD Rewrite
I have been reading and reading just like all you guy's. On a few websites i would pick up bits and pieces on what to try. Heres what i did. Upon Boot up i entered the bios. I then went to Cell Soft and adjusted my timings for my memory. I was at 2.5 not 2.75. I then set my speed down to 166. Exited and restarted. Big mistake everything ri=uns terrible slow and my expensive DDR 400 memory was showing up correctly at 333. Rebooted again entered the bios. reset my speed to 400. Then set the Overclock feature to manual. Set my timings at 2,2,5,2 200 and 2.75 volts. After saving settings and exiting I then turned off the computer. As per some other suggestions I moved my Audigy2 to the bottom most pci slot the one above the orange slot. I moved my memory to slots 2 and 4. I moved my SATA to slots 3 and 4. I rebooted went into the bios again and setup all my voltages. CPU was Auto, AGP was max yellow setting. Memory still at 2.75. I disabled the onboard serial and parrallel ports. Rebooted
Fearing the worst,
5 seconds, 10 seconds, windows screen loging prompt. There was nothing wrong at all. It rebooted effortlessly. It re found my Audigy card and wanted driver but that was it. I am going to reboot a few more times and then run sisandra to test. I hope some of this will help you. I post in a few after some of those reboots.

Best ram for MSI K8N Neo2 Platinum Edition?

Ho guys
Im getting a MSI K8N Neo2 Platinum Edition this week but cant decide what memory to use what is the best memory for this board here
are my options.
http://www.stegcomputer.ch/details.asp?prodid=kin-KHX32-1c2
http://www.brack.ch/aspx/default.aspx?ID=17879&mod=artikel
http://www.brack.ch/aspx/default.aspx?ID=17636&mod=artikel
http://www.brack.ch/aspx/default.aspx?ID=17885&mod=artikel
http://www.1000ordi.ch/2500
I will be overclocking.
Any help would be appreciated

Quote from: mehdi on 13-July-05, 22:09:22
XL's is verified by anand to top at 2-3-3 on DDR466 so this would be how much of a oce on a 3700sandy at those timings.
Well the 3700 San Diego har a max multilplier equals 11 and you can use the lower ones also .
So you have more options than one to reach say you set a goal for 2700mhz assuming you have air cooling (2.7ghz seems to be what most aim for without extreme cooling)
HTT reference clock at 233 with memory index 200 times multiplier 11 gives 2530mhz on the cpu and 233mhz/466DDR on the memory .
To maintain same memory speed (around or below 233mhz) with higher cpu frequency you must use a divider by setting max memory speed to 166 etc and use a higher HTT clock reference .
E.g
HTT=270
Multiplier=10
Memory index=166
Gives CPU/12 divider
CPU is then 2.7ghz
Memory speed = cpuspeed/12 = 2700/12 = 225mhz or DDR450 .
Multilplier memory index dividers:
7x with 133 : cpu/11
8x with 133 : cpu/12
9X with 133 : cpu/14
10x with 133 : cpu/15
11x with 133 : cpu/17
7x with 166 : cpu/9
8x with 166 : cpu/10
9X with 166 : cpu/11
10x with 166 : cpu/12
11x with 166 : cpu/13
7x with 183 : cpu/8
8x with 183 : cpu/9
9X with 183 : cpu/10
10x with 183 : cpu/11
11x with 183 : cpu/13
7x with 200 : cpu/7
8x with 200 : cpu/8
9X with 200 : cpu/9
10x with 200 : cpu/10
11x with 200 : cpu/11
( with 200 you will se the divider is the same as multiplier , thats why some calls this 1:1 )
There are also some tables for the dividers made by orcar wu over at extremesystems in this thread:
http://www.xtremesystems.org/forums/showthread.php?t=41595&highlight=a64+divider+table]
Using this calculation you can figure out your ram frequency before trying it in the bios .
E.g use 183 mem index/divider with cpu multiplier 10x with 2.7ghz as the target .
10 x 270 = 2700
memory will run at
2700/11 = ~ 245mhz or DDR490

Looking for T1 T2 memory command ?(K8N NEO2 Platinum NFORCE ULTRA)

Similar Messages

Maybe you are looking for