Looking for T61 Drivers to support Windows 2008 Server

Hello:
I recently bought a T61 that came with Vista Ultimate. I ventured into installing Windows 2008 Server on it.
I have been almost successful in my attempt. The machine does operate and I was able to use the Vista drivers to configure the components.
I compare the Device Listings under Vista and under Server 2008 and I see the following missing components:
Bluetooth Radios
    Microsoft Bluetooth Enumerator
Disk drives
    IMD-0
Human Interface Devices
    Bluetooth Remote Control
    HD-compliant consumer control device
IDE ATA/ATAPI controllers
    IDE Channel
Monitors
    ThinkPad Display 1440x900 (mine says Generic PnP Monitor)
Network Adapters
    Bluetooth Device (Pesoanl Area Network)
    Bluetooth Device (RFCOMM Protocol TDI)
SM Driver
    SM Bus Service
System Devices
    UMBus Enumerator
The good news is that the laptop works fine as a Server. If I could resolve these missing components, it will be nice.
I searched through Google but I don't seem to have any luck identifying the drivers. And, of course Lenovo Technical Support said that they do not support that OS on this laptop even though I have proved them wrong!)
Can somebody advise me?
venki

Hello venki,
I have run server 2008 on my T61 7665-b68.
I have installed all Drivers for Vista 64 from Lenovo with systemupdate.
For the bluetooth installation look hier: http://capitalhead.com/articles/enable--install-microsoft-bluetooth-stack-on-windows-server-2008-x64...
regards
Sven
IBM T61 - 7665-B68 - 4GB RAM - 250GB HD - 1,8 GHz T7100 - 14,1" Display -1440x900 Intel 4965 a/g/n WLAN - DVDRW Multidrive III - Bluetooth 2.0 - Fingerprint

Similar Messages

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

RAID drivers that support Windows 2003 server for Qosmio G30-153

Hi,
Where can i find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153 )
Thanks in Advance.
Abdul Hameed

Hi
Windows Server 2003 should support the XP drivers.
So try to search for the RAID XP drivers!
regards :)

Supports Windows 2008 server OS

Hi All,
Which Cisco ICM(Enterprise) version supports windows 2008 server OS. Is ICM 8.0 or 8.5 supports windows 2008 server os?
Thanks,
Senthil.

Still unsupported, even on 8.5.... see the latest 8.5 BOM below
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_8_5/user/guide/icm85_bom.pdf

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Oracle 10g on Windows 2008 Server Std. edition

Hi all
We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
We try to install Oracle 10g 32 Bit - We get the following problems
a) By default it should take the highest partion i.e d:\oracle\product etc.
but it takes c:\users\administrator\documnets\oracle\product which is wrong
However we correct it by typing the correct path. Brows does not take to D partition
b) On proceeding further - >Installation aborts and and we get messages
unknowkn , unknown etc. for 3-4 aspects.
Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
User connected was administrator while installation of Oracle 10g 32 Windows.
We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
Kindly suggest some remedy
Suresh Bansal

With due respect i wish to request you to please see below thread:
Re: Oracle 10g
Which is making me confused.
Regards
Girish Sharma
There's a specific version for Windows 2008 (10.2.0.4), ready to download:
http://www.oracle.com/technology/software/products/database/index.html Reply by Werner

I'm looking for the drivers to dual boot OS X 10.8.1 and Windows 7.

Hey everyone, I'm looking for the drivers that are needed once you install windows. I've got to dual boot due to school. But, I don't ever remember getting a CD or anything with my mac and was hopping I could download them and burn them to a DVD

No, you don't need to install a software update for Lion if you are now running Mountain Lion.

Does GRC 5.3 support Windows 2008?

Dear Experts:
We currently have GRC 5.3 running on Windows 2003 Servers (64bit). They are running fine without any issues. But we are in the process upgrading the servers from Windows 2003 to 2008. I tried to find out if Windows 2008 is supported in GRC 5.3, but in the SAP market place product availability matrix (PAM), only show what browser it will support. No indication for Windows server side. From the installation guide of GRC 5.3, it only listed WIndows 2003, NO 2008 mentioned.
Where I can find the right information on if GRC 5.3 can run on Windows 2008 or not? Are any of you upgraded from 2003 to 2008 for GRC server? Any issues need be aware of?
Thanks,
Yujun Ran

Hi Yujun,
Since GRC relies on the underlying NetWeaver OS PAM, you can install on Windows 2008 Server, if you are successful in installing your Netweaver 7.0. My recommendation would be to look at the compability of database and other supported add-ons too before you actually go with Windows 2008.
Best Regards,
Raghu

Radeon Drivers problems with BootCamp Windows 2008 Server R2

Hello !! I have some troubles with BootCamp and Windows 2008 Server R2... I can't find any graphic drivers for my AMD Radeon HD 6490 !! Heeeelp please
(I Have a Macbook Pro i7)

Shoooryuken, did you ever get this problem resolved? I have thhe same issue...
I have the 2011 MacBook Pro 15" 2.0ghz Quad Core i7 with integrated Intel HD Graphics 3000 and AMD Radeon 6490M.
I just installed Windows Server 2008 R2 (Which is based on Windows 7) using Boot Camp. After I installed it, the I only have 3 resolution options, all of which are stretched. I checked the device manager and found that the Apple Instal DVD did not work and only a "Standard VGA Graphics Adapter" was installed. It also reports a whopping 16MB of graphics memory
I downloaded the "detect and install" driver utility from AMD (http://support.amd.com/us/gpudownload/Pages/index.aspx) and it detected my correct OS and downloaded something (driver maybe?). When I clicked install, I recieved this message: "AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer. Your computer does not contain a proper graphics adapter."
I don't really know why Windows does not detect the graphics card. Right now I am trying to install the Intel graphics drivers for the Intel HD 3000 integrated graphics... I will report back if I get the integrated graphics running...

Windows 2008 server 32 bit support

Hello,
Is MaxDB officially supported for Windows 2008 server 32 bit platform?
Thanks,
Jose

Jose Lopez wrote:>
> OK, then perhaps mention specifically W2003 in the download link?
Hmm... about what download link are you talking?
The one in the download area here in SDN?
If so, then this is not relevant for SAP customers as they should get all their software via DVD delivery or the Service Marketplace downloads!
In the service marketplace download sections there are no restrictions given, since the Product Availability Matrix (https://service.sap.com/pam) contains all the release/support information.
In general, the PAM is the one single place to check for supported versions.
regards,
Lars

Windows 2008 Server, M93P Drivers

We recently purchaced a M93P for server, we installed windows 2008 server on it and there are 6 drivers missing. I've searched for then on the Lenovo website with little luck. Does anyone know where I can find drivers for the following
Ethernet Controller
PCI Serial Bus
PCI Simple Communications Controller
SM Bus Controller
US Controller
And there's an unknown device, listed as ACPI\LEN4001
Thanks for the help.
-Kallie

Is it possible that I could have a copy of WS 2008 64-bit from you?
Thanks,

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Is owb 11g r2,supported by 64 bit windows 2008 server

is owb 11g ,r2 supported on 64 bit windows 2008 server.
is it true that : OWB 11g,r2 is supported only for 32 bit windows 2008.

There is no 64b client for windows at this time. You can check on Oracle for available downloads.
http://www.oracle.com/technetwork/developer-tools/warehouse/downloads/software/index.html

Looking for a way to install Windows Intune via powershell

I'm very new to Powershell and completely lost on how to do this.
Looking for a way to install Windows Intune via powershell from a self extracting zip file I will send to remote users. This will also need to run Corp admin level privileges to install.
Thank you in advance for your help.

Hi Mtirado,
For Windows Intune issue, I recommemd you can post in dedicated forum for more effective support:
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsintune
If you get the initial Powershell script, and the script encounter error or problem, you can post back with current script and issue.
Thanks for your understanding.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

How to develop a plugin for 64-bit windows 2008 server?

I have developed a plugin to open local application from web pages, but the plugin could only run on 32-bit windows and 32-bit and 64-bit windows 7, it couldn't work on 64-bit windows 2008 server. The plugin was compiled by vs2008 studio on 32-bit windows xp. Any instructions or advices, men of genius? Thanks

Hi Gnittala,
Thanks for your reply.
I debug the javascript code in firebug on windows 8 and found that firefox would be not responding while executing "document.body.append(myPlugin)".
My javascript code is below:
function openLocalApp(cmdPath, cmdLine) {
var npMyPlugin = navigator.mimeTypes["application/mozilla-npruntime-scriptable-plugin"];
if (npMyPlugin) {
var myPlugin = document.createElement("embed");
myPlugin.style.visibility = "hidden";
myPlugin.type = "application/mozilla-npruntime-scriptable-plugin";
myPlugin.width = 0;
myPlugin.height = 0;
document.body.appendChild(myPlugin);
myPlugin.foo(cmdPath, cmdLine);
} else {
alert("Failed to create the plugin!");
And firefox plugin's source code copys from the following link:
http://mxr.mozilla.org/seamonkey/source/modules/plugin/samples/npruntime/
Just changed a little.
I know the sample is very old, but newer proper sample couldn't be found. So if you can give me a newer sample, I'll appreciate.
Thanks again.

Looking for T61 Drivers to support Windows 2008 Server

Similar Messages

Maybe you are looking for