Looking for the best solution for downgrading a database from 11.2 to 11.1

we have an install of 11.2 grid and have made several attempts at adding 11.1 binaries and using the 11.2 infrastructure. we patched, etc... but all of our attempts failed in getting 11.1 to work across the cluster.
we have decided to make all of the installs version 11.1.
I am looking for the most straight forward approach to migrate our 11.2 down to 11.1 with the least amount of downtime.
thanks, tom

Hi Tom;
Please check below note
Master Note For Oracle Database Downgrade [ID 1151427.1]
How To Downgrade From Database 11.2 To Previous Release [ID 883335.1]
I belive it will answer all your question.
Please also check below links:
http://blogs.oracle.com/db/2010/09/master_note_for_oracle_database_downgrade_doc_id_11514271.html
Regard
Helios

Similar Messages

TA24002 My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know which erase option would be the best solution for this problem.

My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know what option would be the best solution for this problem?

You appear to have two issues: 1) a hard drive that is not working properly and 2) files you wish to recover.
Re 1) you need to answer Kappy's questions.
Re 2) does the drive load and can you see your photo files? If so can you copy them to another drive?
Do you not have a backup of the photo files?

I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

Help Me.
What is the best solution for this problem ?

Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

SQL Server 2012 - Wat Is The Best Solution For Creating a Read Only Replicated/AlwaysOn Database

Hi there I was wondering if someone may have a best recommendation for the following requirement I have with regards setting up a third database server for reporting?
Current Setup
SQL Server 2012 Enterprise setup at two sites (Site A & Site B).
Configured to use AlwaysOn Availability groups for HA and DR.
Installed on Windows 2012 Servers.
This is all working and failover works fine and no issues. So…
Requirement
A third server needs to be added for the purpose of reporting, to be located on another site (Site C) possibly in another domain. This server needs to have a replicated read only copy of the live database from site A or Site B, whichever is in use. The Site
C reporting database should be as up-to-date to the Site A or Site B database as possible – preferably within a few seconds anyway….
Solution - What I believe are available to me
I believe I can use AlwaysOn and create a ReadOnly replica for the Site C. If so do I assume Site C needs to have the Enterprise version of SQL server i.e. to match Site A & Site B?
Using log shipping which if I am correct means the Site C does not need to be an Enterprise version.
Any help on the best solution for this would be greatly appreciated.
Thanks, Steve

for always on - all nodes should be part of one windows cluster..if there site C is on different domain - I do not think it works.
Logshipping works --as long as the sql on site C is is same or higher version(sql 2012 or above). you can only do read only.
IMHo, if you can make site C in the same domain then, Always is better solution else log shipping
also, if your database has enterprise level features such as - partitonin, data compression -- you cannot restore the database on lower editions- so you need to have enterprise edition.
Hope it Helps!!

What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.

What is the best solution for me to run Microsoft Access on my brand new iMAC? Assume I'm a casual user.
I am lead to believe by some real smart guys on the Apple site that If I have the Apple Store partition my iMAC and add the full suite of Office products on that partition, I can run the few Access programs I have and need to run.
Comments encouraged. Thank you in advance for your consideration and help.

You would have to install Windows, then install Microsoft Office Professional for Windows on it To install Windows you will have to choose between Boot Camp (faster, free) and a Virtual Machine (simpler, slower, easier to backup)
You should try LibreOffice (free), it can open Access files, it may not have all Access's feature set though, worth a try.
www.libreoffice.org

What is the best solution for migrating from Maverick to Yosemite?

What is the best solution for migrating from Maverick to Yosemite? Anyone have suggestions?

Back up all data. Update all third-party software to the latest version and remove any you don't need. Download the Yosemite installer from the App Store. Run it.

The BEST solution for gmail on the iPhone

OK, so after much poking around, I finally figured out the best solution for using gmail on the iPhone: IMAP support.
While I think Google is still rolling this out to all users, once you get it, USE IT! It basically keeps your mail app synced with gmail, and even supports the use of folders/labels.
To see if your gmail account is ready for IMAP, go to the settings option in gmail and see if one of the tabs says "Forwarding and POP/IMAP." If you don't have IMAP available on your account yet, it won't say IMAP.
Here's some links to get you started:
setting up IMAP for gmail on your iPhone:
https://mail.google.com/support/bin/answer.py?answer=77702
how actions in your mail app sync to gmail:
https://mail.google.com/support/bin/answer.py?answer=77657
I hope this helps out everyone as much as it's helped me. I was a little frustrated before using POP, but gotta love IMAP! I'm not too sure the impact that this has on your battery life, but so far it's working well for me. Enjoy!

Gmail and IMAP have totally change my tune about the iPhone's email abilities. I was getting frustrated with the inability to reliably get mail (Message has not been downloaded...), sync (have to delete mail from both iPhone and desktop Mac), etc., but now I have all my POP email accounts automatically forward to my Gmail account, and I only check Gmail with the iPhone and MacPro. So far, it's a whole new iPhone experience! No more errors - ALL mail comes through perfectly - and no need to manually sync!
Note that, when setting up the Gmail/IMAP accounts, do NOT simply update your old POP Gmail settings on your Mac or iPhone! Start with a FRESH new account. I couldn't get either the iPhone or Mac to work until I started with a fresh account.
Also, I was unable to send mail from the iPhone using the smtp.gmail address, so I had changed the outgoing mail setting to use my regular ISP's smtp address. But, at some point (a few minutes later or a few hours, I don't know) when I checked the Gmail settings on the iPhone, it had magically changed itself to smtp.gmail, with the port number, and it has been working perfectly ever since! Maybe IMAP can atomatically correct this info? Not sure.
One more thing. Once you have Gmail IMAP working, then you MUST go here:
http://5thirtyone.com/archives/862
Follow these directions exactly. This is a necessary set of steps in order to make your iPhone and Mac sync correctly, so that trashed mail on the iPhone will go in the trash on your desktop Mac, etc. It's pretty freaky to check email on the iPhone, and then go to your Mac Mail a few minutes later, and see all the newly trashed (or saved/read) emails perfectly synched up!
A final note. Once this is all working and synching, remember that if you delete an email on your iPhone, it gets deleted on the desktop Mac Mail as well (and vice-versa)... which is exactly what you want to happen, but I find that I have to remember to keep the mail that I want to save on the iPhone's inbox until I get back to my desktop Mac. Otherwise, I have to manually remove it from the trash to save it!

What is the best solution for running windows based programs

I have one program that I need windows for. What is the best solution for doing this without painfully slowing down my mac.

Depends on your needs.
BootCamp requires reboot and uses all physical resources of the system. Only OSX *or* Windows can run. Better for gaming or memory intensive tasks. BootCampAssistant must set up the boot sector to make it work. Also BCA required to remove it.
VM (virtual machine) like Parallels which "hosts" Windows while still running OSX. You split RAM between the two environments. VM is just another program so no special boot sector changes needed, but not good for graphics or RAM intensive programs.
Other recommended alternates to Parallels (paid) are VM Fusion (paid) and VirtualBox (free download from Oracle.com).

Pls help putting together the BEST SOLUTION for PP and AE CS4

Hi guys
I was tasked to put together the best machine (machines) for video editing / rendering .. money is not an issue.
My client is a TV broadcasting network and they do lots of videos everyday .. They want to render their work as FAST as possible because sometimes they have tight deadlines and rendering and re rendering (if there are mistakes) has cost them .. so now they're serious about getting the best technology to achieve best rendering time possible, but in a bit of practical sense of course.. i mean there's no sense spending 1000USD or more for a piece of technology that offers under 10 second faster rendering only ..
What they do and want
- edit/put together/ sequence lots of videos constantly, under premiere cs3 (will upgrade to cs4 on the new machine)
- use affter effects for some effects and 3D stuffs.. but not that much.. but increasingly as time goes by and their video editors get more affter effects training..
- needs really really fast rendering!! Right now it takes them typically 1-2 hours to render stuffs, and what to cut this time by half or more..
Existing Setups on work stations:
Intel QuadCore (Q6600, i7, Q9550, Xeon x3220, and the likes)
4GB RAM DDR2 1066mhz
Highend motherboards
GeForce 9500GT , 9800GT, and GTX 260 216sp
GSKILL Falcon 64GB SSD Drive as primary
1TB Western Digital BLACK edition drives for storage
Software:
Windows XP 32 bit
Adobe Premiere Pro CS3 (80% of all their work done here)
AE CS3
etc..
Running NOD32 Antivirus
I am an somewhat of an expert in Hardware and stuff, i build custom PC's machines most of my life but i have limiited knowledge on optimizing hardware for VIDEO EDITING stuffs.. so i turn to you all.
I do understand that w/ video editing CPU is the most important, followed by RAM, and ofcourse by HDD for disc caches and stuff.. and where videocard may come to an advantage as well. and normally i'd suggest the fastest components available . i7 , extreme processors, skulltrail dual quad setups perhaps? RAID 0 SSD Drive? etc.. but I do not know w/c gives the most advantage, and w/c is a waste of money..
I also read about quadro cards offering really big performance improvements using CUDA tech etc..
again im not the expert at this type of requirment.. so i need your advises..
with unlimitted PRACTICAL budget given to me to come up w/ a solution I initially thought a rendering farm would be the solution, but upon reading around it seems there's no rendering farm solution for PP CS4.. just the adobe after effects part.. so i had to go back to the drawing board and suggest really powerful work stations instead..and perhaps have them migrate to 64bit OS for that "extra" performance.. i myself am on win7 64bit and it's looking mighty good.
1) is this the right move?
2) is it still worth it to put together rendering farm for AE renders only? or might as well concentrate funds on the machines/workstations?
Also along the PRACTICALITY LINE, would it be practical to maintain all the existing machines, and instead build a manned RENDERING MACHINE w/ PP and AE (basically desktop or Server if they are faster at rendering w/ the best specs for the purpose etc) where they can just throw the workload to some guy there for rendering? Atleast the editors can continue using the workstations while the rendering machine guy is at work? and even perhaps setup a gigabit lan network where the RENDERING MACHINES can dynamically pull the work load via the network , not needing to transfer the files to the rendering machine first ? etc
as you can see im not only looking for the best machine, but the best STRATEGY for my client.
Good suggestions would be much appreciated.
regards to all

in a nut shell no. if you do not have to "Share" then Avid is pointless Adobe is a far better answer.
Avid solutions still need a computer. The Mojo.Nitris are a joke and Avid no longer provides computers even the Symphany comes with your choice of Apple Mac Pro or HP 800. (Dual Xeon)
there are better "hardware" answers that what Avid sells for Adobe. Decklink, Aja to name a few.
if you have to share then you have no choice. this is the one area Abode does not lead.
renders have to do primarily with 2 things CPU power (Xeon will render faster than single i7)
and Drives. the faster your drive set up the faster the render. Memory does play a part and so does the video card depending on what codec and to what
it also depends on WHAT you are rendering and from what for the HDDs.
without knowing your work flow format and codec its impossible to suggest something.
in terms of rendering
Core i7
Dual Xeon (faster unless still doing DV/HDV thru firewire)
Sonnet raid array
Scott
ADK

Socket Or RMI for the best solution

Do me a favor guys...help me to figure this out, which the best solution of this, i create some networks, what i plan is like this..
if client send their request to appServer which using web browser, the request will arrive to the appServer,right? and then i create some network application to forward the request to another computer to be process, and response the client... the problem are :
1. which is more efficient, faster,reliabe and secure ,create socket and i put the socket on My RMI or only using socket?
2. if i combine both RMI and Socket, is that good or not? why?
Thank u so much for answer....

Is that much more easier to implement using RMI? why? if i only use Socket,how about the connection,is that slower than RMI or not? and how about the security problem?
will have problem with RMI if u client behind Firewall or proxy.is that true? how to handle this? how can this could be happen?

What is the best solution for my need

I have a failry simple need, but with so many products on acrobat.com, I'm not sure the best way to tackle it.
I want to be able to email my new employees a link to paperwork I need filled out for their employment with my company, and have the results go to my HR dept.
I setup a form on formscentral, but im not sure if thats the best solution, it gives the results in Excel, and I would rather be able to print the form they filled out for filing.
Whats the best way to accomplish this?
Thanks for your help
-B.Fabiano

Hi B.Fabiano
You can export responses as PDF. It will extract each response as a seperate PDF.
See if that works for you.

What's the best solution for audio out of sound files from a MacBook Air to both an amplifier and to a subwoofer amplifier? I'm using the MBA to play sound files for worship services at our church.

I have a MacBook Air (13", 1.7GHz, 8GB RAM, 500GB SSD) that I'll be using to play sound files (primarily organ and piano) for worship services at my church. We'll be using a QSC RMX2450 650 Watts/Channel amplifier with Community CPL-27 speakers and also a JBL SUB 250P powered subwoofer with its own amplifier. What's the best option for getting sound out from the Mac to both of these amplifiers?

if you work with own recorded sounds you might wanna have a music program where you want to work with samples, steinberg has got very good ones (so they say)... but their really really ( ²) expensive(that's why almost no one haves them), magix haves good ones too bu their more for 'unprofessional' use, ableton haves really good ones too and they're not to difficult to use (if you know a bit of those programs you learn very quickly) and if you don't get them, there is a sort of manual built in it which explains and lets you do things to start (basics)
i hope this helped, btw stereo speakers are always better if you buy good ones (no pc speakers), but if you don't think you need them, don't buy them...
so again, i hope you have some ideas now

What is the best solution for Internet patter access inside of domain BizTalk server?

Hi guys,
Our BizTalk server put the company domain network, it can't access to the internet, just external DMZ can be access from internet.
senario:
Internet partner <=> Extenal DMZ server <=> intenal DMZ server <=> BizTalk Server
1.Internet partner and external DMZ Server can access each other
2.external and internal DMZ Server can access each other
3.internal DMZ Server and BizTalk server can access each other
What is the best solution from your idears? I am look forward your wonderful sharing.
Phile

#3 is the most common scenario, but to BizTalk and your app, it doesn't matter.
What you need to find out first from you security team is whether or not they will allow a connection to be made directly to the BizTalk computer or require proxying.

What are the best solutions for data warehouse configuration in 10gR2

I need help on solutions to be provided to my Client for upgrading the data warehouse.
Current Configuration: Oracle database 9.2.0.8. This database contains the data warehouse and one more data mart on the same host.Sizes are respectively 6 Terabyte(retention policy of 3 years+current year) and 1 Terabyte. The ETL tool and BO Reporting tools are also hosted on the same host. This current configuration is really performing poor.
Client cannot go for a major architectural or configuration changes to its existing environment now due to some constraints.
However, they have agreed to separate out the databases on separate hosts from the ETL tools and BO objects. Also we are planning to upgrade the database to 10gR2 to attain stability, better performance and overcome current headaches.
We cannot upgrade the database to 11g as the BO is at a version 6.5 which isn't compatible with Oracle 11g. And Client cannot afford to upgrade anything else other than the database.
So, my role is very vital in providing a perfect solution towards better performance and take a successful migration of Oracle Database from one host to another (similar platform and OS) in addition to upgrade.
I have till now thought of the following:
Move the Oracle database and data mart to separate host.
The host will be the same platform, that is, HP Superdome with HP-UX 32-bit OS (we cannot change to 64-bit as ETL tool doesn't support)
Install new Oracle database 10g on the new host and move the data to it.
Exploring all new features of 10gR2 to help data warehouse, that is, SQL MODEL Clause introduction, Parallel processing, Partitioning, Data Pump, SPA to study pre and post migrations.
Also thinking of RAC to provide more better solution as our main motive is to show a tremendous performance enhancement.
I need all your help to prepare a good road map for my assignment. Please suggest.
Thanks,
Tapan

SGA=27.5 GB and PGA=50 MB
Also I am pasting part of STATSPACK Report, eliminating the snaps of DB bounce. Please suggest the scope of improvement in this case.
STATSPACK report for
Snap Id Snap Time Sessions Curs/Sess Comment
Begin Snap: 582946 11-Mar-13 20:02:16 46 12.8
End Snap: 583036 12-Mar-13 18:24:24 60 118.9
Elapsed: 1,342.13 (mins)
Cache Sizes (end)
~~~~~~~~~~~~~~~~~
Buffer Cache: 21,296M Std Block Size: 16K
Shared Pool Size: 6,144M Log Buffer: 16,384K
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 1,343,739.01 139,883.39
Logical reads: 100,102.54 10,420.69
Block changes: 3,757.42 391.15
Physical reads: 6,670.84 694.44
Physical writes: 874.34 91.02
User calls: 1,986.04 206.75
Parses: 247.87 25.80
Hard parses: 5.82 0.61
Sorts: 1,566.76 163.10
Logons: 10.99 1.14
Executes: 1,309.79 136.35
Transactions: 9.61
% Blocks changed per Read: 3.75 Recursive Call %: 43.34
Rollback per transaction %: 3.49 Rows per Sort: 190.61
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.90 Redo NoWait %: 100.00
Buffer Hit %: 96.97 In-memory Sort %: 100.00
Library Hit %: 99.27 Soft Parse %: 97.65
Execute to Parse %: 81.08 Latch Hit %: 99.58
Parse CPU to Parse Elapsd %: 3.85 % Non-Parse CPU: 99.34
Shared Pool Statistics Begin End
Memory Usage %: 7.11 50.37
% SQL with executions>1: 62.31 46.46
% Memory for SQL w/exec>1: 26.75 13.47
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
CPU time 492,062 43.66
db file sequential read 157,418,414 343,549 30.49
library cache pin 92,339 66,759 5.92
PX qref latch 63,635 43,845 3.89
db file scattered read 2,506,806 41,677 3.70
Background Wait Events for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file sequential read 176,386 0 3,793 22 0.2
log file parallel write 2,685,833 0 1,813 1 3.5
db file parallel write 239,166 0 1,350 6 0.3
control file parallel write 33,432 0 79 2 0.0
LGWR wait for redo copy 478,120 536 75 0 0.6
rdbms ipc reply 10,027 0 47 5 0.0
control file sequential read 32,414 0 40 1 0.0
db file scattered read 4,101 0 30 7 0.0
db file sequential read 13,946 0 29 2 0.0
direct path read 203,694 0 14 0 0.3
log buffer space 363 0 13 37 0.0
latch free 3,766 0 9 2 0.0
direct path write 80,491 0 6 0 0.1
async disk IO 351,955 0 4 0 0.5
enqueue 28 0 1 21 0.0
buffer busy waits 1,281 0 1 0 0.0
log file single write 172 0 0 1 0.0
rdbms ipc message 10,563,204 251,286 992,837 94 13.7
pmon timer 34,751 34,736 78,600 2262 0.0
smon timer 7,462 113 76,463 10247 0.0
Instance Activity Stats for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
Statistic Total per Second per Trans
CPU used by this session 49,206,154 611.0 63.6
CPU used when call started 49,435,735 613.9 63.9
CR blocks created 6,740,777 83.7 8.7
Cached Commit SCN referenced 423,253,503 5,256.0 547.2
Commit SCN cached 19,165 0.2 0.0
DBWR buffers scanned 48,276,489 599.5 62.4
DBWR checkpoint buffers written 6,959,752 86.4 9.0
DBWR checkpoints 454 0.0 0.0
DBWR free buffers found 44,817,183 556.5 57.9
DBWR lru scans 137,149 1.7 0.2
DBWR make free requests 162,528 2.0 0.2
DBWR revisited being-written buff 4,220 0.1 0.0
DBWR summed scan depth 48,276,489 599.5 62.4
DBWR transaction table writes 5,036 0.1 0.0
DBWR undo block writes 2,989,436 37.1 3.9
DDL statements parallelized 3,723 0.1 0.0
DFO trees parallelized 4,157 0.1 0.0
DML statements parallelized 3 0.0 0.0
OS Block input operations 29,850 0.4 0.0
OS Block output operations 1,591 0.0 0.0
OS Characters read/written 182,109,814,791 2,261,447.1 235,416.9
OS Integral unshared data size ################## 242,463,432.4 ############
OS Involuntary context switches 188,257,786 2,337.8 243.4
OS Maximum resident set size 43,518,730,619 540,417.4 56,257.5
OS Page reclaims 159,430,953 1,979.8 206.1
OS Signals received 5,260,938 65.3 6.8
OS Socket messages received 79,438,383 986.5 102.7
OS Socket messages sent 93,064,176 1,155.7 120.3
OS System time used 10,936,430 135.8 14.1
OS User time used 132,043,884 1,639.7 170.7
OS Voluntary context switches 746,207,739 9,266.4 964.6
PX local messages recv'd 55,120,663 684.5 71.3
PX local messages sent 55,120,817 684.5 71.3
Parallel operations downgraded 1 3 0.0 0.0
Parallel operations not downgrade 4,154 0.1 0.0
SQL*Net roundtrips to/from client 155,422,335 1,930.0 200.9
SQL*Net roundtrips to/from dblink 18 0.0 0.0
active txn count during cleanout 16,529,551 205.3 21.4
background checkpoints completed 43 0.0 0.0
background checkpoints started 43 0.0 0.0
background timeouts 280,202 3.5 0.4
branch node splits 4,428 0.1 0.0
buffer is not pinned count 6,382,440,322 79,257.4 8,250.7
buffer is pinned count 9,675,661,370 120,152.8 12,507.9
bytes received via SQL*Net from c 67,384,496,376 836,783.4 87,109.3
bytes received via SQL*Net from d 6,142 0.1 0.0
bytes sent via SQL*Net to client 50,240,643,657 623,890.4 64,947.1
bytes sent via SQL*Net to dblink 3,701 0.1 0.0
calls to get snapshot scn: kcmgss 145,385,064 1,805.4 187.9
calls to kcmgas 36,816,132 457.2 47.6
calls to kcmgcs 3,514,770 43.7 4.5
change write time 369,373 4.6 0.5
cleanout - number of ktugct calls 20,954,488 260.2 27.1
cleanouts and rollbacks - consist 6,357,174 78.9 8.2
cleanouts only - consistent read 10,078,802 125.2 13.0
cluster key scan block gets 69,403,565 861.9 89.7
Instance Activity Stats for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
Statistic Total per Second per Trans
cluster key scans 41,311,211 513.0 53.4
commit cleanout failures: block l 413,776 5.1 0.5
commit cleanout failures: buffer 414 0.0 0.0
commit cleanout failures: callbac 41,194 0.5 0.1
commit cleanout failures: cannot 174,382 2.2 0.2
commit cleanouts 11,469,056 142.4 14.8
commit cleanouts successfully com 10,839,290 134.6 14.0
commit txn count during cleanout 17,155,424 213.0 22.2
consistent changes 145,418,277 1,805.8 188.0
consistent gets 8,043,252,188 99,881.4 10,397.7
consistent gets - examination 3,180,028,047 39,489.7 4,110.9
current blocks converted for CR 9 0.0 0.0
cursor authentications 14,926 0.2 0.0
data blocks consistent reads - un 143,706,500 1,784.6 185.8
db block changes 302,577,666 3,757.4 391.2
db block gets 336,562,217 4,179.4 435.1
deferred (CURRENT) block cleanout 2,912,793 36.2 3.8
dirty buffers inspected 627,174 7.8 0.8
enqueue conversions 1,296,337 16.1 1.7
enqueue releases 13,053,200 162.1 16.9
enqueue requests 13,239,092 164.4 17.1
enqueue timeouts 185,878 2.3 0.2
enqueue waits 114,120 1.4 0.2
exchange deadlocks 7,390 0.1 0.0
execute count 105,475,101 1,309.8 136.4
free buffer inspected 1,604,407 19.9 2.1
free buffer requested 258,126,047 3,205.4 333.7
hot buffers moved to head of LRU 22,793,576 283.1 29.5
immediate (CR) block cleanout app 16,436,010 204.1 21.3
immediate (CURRENT) block cleanou 2,860,013 35.5 3.7
index fast full scans (direct rea 12,375 0.2 0.0
index fast full scans (full) 3,733 0.1 0.0
index fast full scans (rowid rang 192,148 2.4 0.3
index fetch by key 1,321,024,486 16,404.5 1,707.7
index scans kdiixs1 406,165,684 5,043.8 525.1
leaf node 90-10 splits 50,373 0.6 0.1
leaf node splits 697,235 8.7 0.9
logons cumulative 884,756 11.0 1.1
messages received 3,276,719 40.7 4.2
messages sent 3,257,171 40.5 4.2
no buffer to keep pinned count 569 0.0 0.0
no work - consistent read gets 4,406,092,172 54,715.0 5,695.8
opened cursors cumulative 20,527,704 254.9 26.5
parse count (failures) 267,088 3.3 0.4
parse count (hard) 468,996 5.8 0.6
parse count (total) 19,960,548 247.9 25.8
parse time cpu 323,024 4.0 0.4
parse time elapsed 8,393,422 104.2 10.9
physical reads 537,189,332 6,670.8 694.4
physical reads direct 292,545,140 3,632.8 378.2
physical writes 70,409,002 874.3 91.0
physical writes direct 59,248,394 735.8 76.6
physical writes non checkpoint 69,103,391 858.1 89.3
pinned buffers inspected 11,893 0.2 0.0
prefetched blocks 95,892,161 1,190.8 124.0
prefetched blocks aged out before 1,495,883 18.6 1.9
Instance Activity Stats for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
Statistic Total per Second per Trans
process last non-idle time ################## ############## ############
queries parallelized 417 0.0 0.0
recursive calls 122,323,299 1,519.0 158.1
recursive cpu usage 3,144,533 39.1 4.1
redo blocks written 180,881,558 2,246.2 233.8
redo buffer allocation retries 5,400 0.1 0.0
redo entries 164,728,513 2,045.6 213.0
redo log space requests 1,006 0.0 0.0
redo log space wait time 2,230 0.0 0.0
redo ordering marks 2,563 0.0 0.0
redo size 108,208,614,904 1,343,739.0 139,883.4
redo synch time 558,520 6.9 0.7
redo synch writes 2,343,824 29.1 3.0
redo wastage 1,126,585,600 13,990.0 1,456.4
redo write time 718,655 8.9 0.9
redo writer latching time 7,763 0.1 0.0
redo writes 2,685,833 33.4 3.5
rollback changes - undo records a 522,742 6.5 0.7
rollbacks only - consistent read 335,177 4.2 0.4
rows fetched via callback 1,100,990,382 13,672.1 1,423.3
session connect time ################## ############## ############
session cursor cache count 1,061 0.0 0.0
session cursor cache hits 1,687,796 21.0 2.2
session logical reads 8,061,057,193 100,102.5 10,420.7
session pga memory 1,573,228,913,832 19,536,421.0 2,033,743.8
session pga memory max 1,841,357,626,496 22,866,054.4 2,380,359.0
session uga memory 1,074,114,630,336 13,338,399.4 1,388,529.0
session uga memory max 386,645,043,296 4,801,374.0 499,823.6
shared hash latch upgrades - no w 410,360,146 5,095.9 530.5
sorts (disk) 2,657 0.0 0.0
sorts (memory) 126,165,625 1,566.7 163.1
sorts (rows) 24,048,783,304 298,638.8 31,088.3
summed dirty queue length 5,438,201 67.5 7.0
switch current to new buffer 1,302,798 16.2 1.7
table fetch by rowid 6,201,503,534 77,010.5 8,016.8
table fetch continued row 26,649,697 330.9 34.5
table scan blocks gotten 1,864,435,032 23,152.6 2,410.2
table scan rows gotten 43,639,997,280 541,923.3 56,414.3
table scans (cache partitions) 26,112 0.3 0.0
table scans (direct read) 246,243 3.1 0.3
table scans (long tables) 340,200 4.2 0.4
table scans (rowid ranges) 359,617 4.5 0.5
table scans (short tables) 9,111,559 113.2 11.8
transaction rollbacks 4,819 0.1 0.0
transaction tables consistent rea 824 0.0 0.0
transaction tables consistent rea 1,386,848 17.2 1.8
user calls 159,931,913 1,986.0 206.8
user commits 746,543 9.3 1.0
user rollbacks 27,020 0.3 0.0
write clones created in backgroun 7 0.0 0.0
write clones created in foregroun 4,350 0.1 0.0
Buffer Pool Statistics for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
-> Standard block size Pools D: default, K: keep, R: recycle
-> Default Pools for other block sizes: 2k, 4k, 8k, 16k, 32k
Free Write Buffer
Number of Cache Buffer Physical Physical Buffer Complete Busy
P Buffers Hit % Gets Reads Writes Waits Waits Waits
D 774,144 95.6############ 233,869,082 10,089,734 0 0########
K 504,000 99.9############ 3,260,227 1,070,338 0 0 65,898
R 63,504 96.2 196,079,539 7,511,863 535 0 0 0
Buffer wait Statistics for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
-> ordered by wait time desc, waits desc
Tot Wait Avg
Class Waits Time (s) Time (ms)
data block 7,791,121 14,676 2
file header block 587 101 172
undo header 151,617 71 0
segment header 299,312 58 0
1st level bmb 45,235 7 0
bitmap index block 392 1 3
undo block 4,250 1 0
2nd level bmb 14 0 0
system undo header 2 0 0
3rd level bmb 1 0 0
Latch Activity for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
->"Get Requests", "Pct Get Miss" and "Avg Slps/Miss" are statistics for
willing-to-wait latch get requests
->"NoWait Requests", "Pct NoWait Miss" are for no-wait latch get requests
->"Pct Misses" for both should be very close to 0.0
Pct Avg Wait Pct
Get Get Slps Time NoWait NoWait
Latch Requests Miss /Miss (s) Requests Miss
Consistent RBA 2,686,230 0.0 0.2 0 0
FAL request queue 86 0.0 0 0
FAL subheap alocation 0 0 2 0.0
FIB s.o chain latch 1,089 0.0 0 0
FOB s.o list latch 4,589,986 0.5 0.0 2 0
NLS data objects 1 0.0 0 0
SQL memory manager worka 5,963 0.0 0 0
Token Manager 0 0 2 0.0
active checkpoint queue 719,439 0.3 0.1 0 1 0.0
alert log latch 184 0.0 0 2 0.0
archive control 4,365 0.0 0 0
archive process latch 1,808 0.6 0.6 0 0
begin backup scn array 3,387,572 0.0 0.0 0 0
cache buffer handles 1,577,222 0.2 0.0 0 0
cache buffers chains ############## 0.5 0.0 430 354,357,972 0.3
cache buffers lru chain 17,153,023 0.1 0.0 1 385,505,654 0.5
cas latch 538,804,153 0.3 0.0 7 0
channel handle pool latc 1,776,950 0.5 0.0 0 0
channel operations paren 2,901,371 0.3 0.0 0 0
checkpoint queue latch 99,329,722 0.0 0.0 0 11,153,369 0.1
child cursor hash table 3,927,427 0.0 0.0 0 0
commit callback allocati 8,739 0.0 0 0
dictionary lookup 7,980 0.0 0 0
dml lock allocation 6,767,990 0.1 0.0 0 0
dummy allocation 1,898,183 0.2 0.1 0 0
enqueue hash chains 27,741,348 0.1 0.1 4 0
enqueues 17,450,161 0.3 0.1 6 0
error message lists 132,828 2.6 0.2 1 0
event group latch 884,066 0.0 0.7 0 0
event range base latch 1 0.0 0 0
file number translation 34 38.2 0.9 0 0
global tx hash mapping 577,859 0.0 0 0
hash table column usage 4,062 0.0 0 8,757,234 0.0
hash table modification 16 0.0 0 2 0.0
i/o slave adaptor 0 0 2 0.0
job workq parent latch 4 100.0 0.3 0 494 8.7
job_queue_processes para 1,950 0.0 0 2 0.0
ksfv messages 0 0 4 0.0
ktm global data 8,219 0.0 0 0
lgwr LWN SCN 2,687,862 0.0 0.0 0 0
library cache 310,882,781 0.9 0.0 34 104,759 4.0
library cache load lock 30,369 0.0 0.3 0 0
library cache pin 153,821,358 0.1 0.0 2 0
library cache pin alloca 126,316,296 0.1 0.0 4 0
list of block allocation 2,730,808 0.3 0.0 0 0
loader state object free 566,036 0.1 0.0 0 0
longop free list parent 197,368 0.0 0 8,390 0.0
message pool operations 14,424 0.0 0.0 0 0
messages 25,931,764 0.1 0.0 1 0
mostly latch-free SCN 40,124,948 0.3 0.0 5 0
Latch Sleep breakdown for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
-> ordered by misses desc
Get Spin &
Latch Name Requests Misses Sleeps Sleeps 1->4
cache buffers chains ############## 74,770,083 1,062,119 73803903/884
159/71439/10
582/0
redo allocation 170,107,983 3,441,055 149,631 3292872/1467
48/1426/9/0
library cache 310,882,781 2,831,747 89,240 2754499/6780
6/7405/2037/
0
shared pool 158,471,190 1,755,922 55,268 1704342/4836
9/2826/385/0
cas latch 538,804,153 1,553,992 6,927 1547125/6808
/58/1/0
row cache objects 161,142,207 1,176,998 27,658 1154070/1952
0/2560/848/0
process queue reference 1,893,917,184 1,119,215 106,454 78758/4351/1
36/0/0
Library Cache Activity for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
->"Pct Misses" should be very low
Get Pct Pin Pct Invali-
Namespace Requests Miss Requests Miss Reloads dations
BODY 3,137,721 0.0 3,137,722 0.0 0 0
CLUSTER 6,741 0.1 4,420 0.2 0 0
INDEX 353,708 0.8 361,065 1.2 0 0
SQL AREA 17,052,073 0.3 54,615,678 0.9 410,682 19,628
TABLE/PROCEDURE 3,521,884 0.2 12,922,737 0.1 619 0
TRIGGER 1,975,977 0.0 1,975,977 0.0 1 0
SGA Memory Summary for DB: P7IN1 Instance: P7IN1 Snaps: 582946 -583036
SGA regions Size in Bytes
Database Buffers 22,330,474,496
Fixed Size 779,288
Redo Buffers 17,051,648
Variable Size 7,180,648,448
sum 29,528,953,880

Is FCP the best solution for me?

I apologize in advance for asking such a general "newbie" question to this astute group!
I am digitizing about 100 hours of family videotapes, and want to cut them down to a rational size by eliminating junk footage, as well as potentially making some finished movies for sharing with the family. The footage is all on an external drive, since my hard drive is filling up rapidly. Potentially I would like to assemble clips by person, as well as by event. I have used iMovie to create some basic movies, but not used FCP, and I know the learning curve is steep, a big disadvantage. I don't need a lot of special effects, and I'll qualify myself as saying I don't mind paying $300 for the software: I'm just looking for the most efficient way of dealing with so much raw footage, and potentally using the same clip in two different movies (by person and by event). I got interested in FCP because I thought I read that the software doesn't physically move the clips from my external drive, which would be handy considering my limited drive space.
I use a MacPro with adequate resources, except for the hard drive limitation.
Many thanks,
Sam

You can certainly use FCP X to organize your footage.
I think the best course of action is to try for yourself.
There is a free trial version that is fully functional for 30 days:
http://www.apple.com/finalcutpro/trial/

Looking for the best solution for downgrading a database from 11.2 to 11.1

Similar Messages

Maybe you are looking for