Looking for the classic "Bad Take" transition.

My problem is, I don't even know what the proper technical search terms would be for this. So let me describe.
You've seen the transition effect countless times where someone on camera makes a mistake and the screen goes black (or white) for a split second and you hear a short (a fraction of a second) "BEEP," to signify that what follows is a retake. It's a comic effect.
Is it an electronic clapper tone?
It may be the same tone you hear when at the beginning of old films, you'd see the clock hand sweep around a huge 5, 4, 3, 2... and at each one, there'd be a "BEEP"
I think I just need the tone. I can add a solid black or white still for the visual part. I tried looking through my iMovie/iLife files and didn't see anything. I also tried Freesound.org
Any ideas?

and in addendum (searching for the right english expression):
it is not a plain fade-to-white, but a socalled light-leak
(as if the 'film' was taken out of camera)
it's a bit complex, therefor a commercial product, as
http://www.crumplepop.com/?page_id=1032
$69 ...

Similar Messages

When i ask my macbook air to print it tells me it is looking for my printer it takes several minutes before it finds it and then prints, why is that as my wife is connected to the same printer in the same way (bluetooth) and hers prints straight away

As per my question, when i ask it to print it tells me it is looking for my printer this takes several minutes before it prints. my wife is in the same room using an imac also using a bluetooth connection to the same printer and hers prints immediately. why is this.

Perhaps you could try this to resolve your issue:
*How to Reset the Printing System*
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse (or right click if supported).
4. Click "Reset printing system ..."
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your print queues again.

I'm looking for the best Mic in

I'm setting up an office-to-office videoconferencing system. I've got the video down, but I'm looking for the best audio I can get. The sound will be stereo output, but I need really good microphone input. Echo cancelling is a must, but the Windows XP echo cancellation sounds like a bad telephone connection. Does anyone have any ideas? Are any of the mic inputs better on one SoundBlaster than on the others?

"If you plan on writing apps for Windows, get a Windows-based computer."
A MacBook Pro running ML is the best lapstop computer for running Windows according to
this: http://www.eweek.com/apple/apple-makes-the-best-windows-laptop-soluto/
The OP already has the best hardware for developing Windows applications.

Looking for the BEST java IDE

Hi
We're evaluating java IDE's (especially JBuilder & VisualAge) for a Client-Server project that uses RMI (there is no Web development\HTML\Bens involved)
I would appreciate any recommendations, suggestions, articles or reviews that you have.
thanks in Advance...

Both of these IDEs are very solid pieces of software each with their own advantages.
JBuilder is similar to most other java IDEs. It takes less time to become productive in JBuilder than it will take in Visual Age because Visual Age takes a non-standard approach to java development. Be sure to look at a recent version of JBuilder because early version support for remote debugging was very poor.
Visual Age has some of the most advanced java development features of any IDE I've ever used. The downside of this functionality is that it takes quite a bit of time to get accustomed to the IDE. Visual Age doesn't use files like most other IDEs opting instead to provide a completely separate archiving mechanism called a Repository.
If you're looking for something that will take very little time to learn, JBuilder is the better choice. It doesn't have as many features as Visual Age but it's also a lot more like most IDEs and has just about everything most java projects will need.
If you're team is composed primarily of Sr. developers and you're willing to take the time to learn the IDE, Visual Age is well worth the investment. It's a pain to learn but once you learn it you won't want to go back to file based development.
Of course, if you're looking for something between these 2 in terms of features and complexity, download the community edition of forte and give it a whirl.

Looking for the right List...

Hi there!
I want to use a List class to hold a potentially large number of elements. I don't care about randomly accessing elements; only Iterators will be used to iterate through the List. What I mostly care about is storage overhead and garbage collection.
ArrayList and Vector have the problem of re-allocating memory and copying their internal array as you add elements - in case you don't know the exact number beforehand, which is my case.
On the other hand, LinkedList creates a new object for each element you put in the List. All these objects will have to be garbage collected at some time, and this takes resources. In my case, I could have 10s or 100s of objects, each creating its own List with 10s or 100s of objects.
So, essentially, I'm looking for the best trade-off. Anybody done some stress-testing?
Thanks a lot!
Vagelis

Well... it depends.
If you know up front how many entries there are going to be in each list and the lists are fairly stable then you'd be best off going with an ArrayList. If there's a lot of addition and removal of items in the list and you have no clue how many objects there are going to be in each list, then you might be better with a LinkedList. It may also depend on how you remove entries from the list (by index or by object value) or whether you just throw a whole list away and start again.
Personally I've used ArrayLists of ArrayLists containing 10s or 10000s of objects and "been okay", by which I mean this has never been the performance bottleneck in my system.
In extremis (particularly if performance is really critical and you know quite a lot about how your objects are to be organised) it might be more sensible to roll your own implementation (for example, if an object appears only in one list at a time then it could be made "Listable" and hold its own forward and backward references to aid in its insertion in a linked list).
If you can give some more information on the exact required behaviour then people can help more.
In the meantime my recommendation is to use an ArrayList and if performance becomes a problem, profile the execution later and consider switching.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

Problem with my program looking for the settings file in the wrong folder

I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
Edited by: ColNewman on Feb 5, 2008 6:55 PM

So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

Where to look for the computed stats collected using gather_table_stats

I have used analyze command before but new to gather_table_stats.
I have executed gather_table_stats procedure as given below. Now where to look for the statistics estimated and also what are the important parameters I need to look in the stats ? Any major difference between analyze & gather_table_stats ?
SQL> exec dbms_stats.gather_table_stats(ownname => 'TPDBS01A', tabname => 'x_TPD_STG_TL_SF_LEGAL_OWN
ER' , estimate_percent => 50, method_opt => 'for all indexed columns size auto');
PL/SQL procedure successfully completed.

The command "analyze table" is deprecated for gathering optimizer statistics. But it is still the only command to get for instance the chained rows. This command is no longer maintained for new features, so if you use this command to collect statistics, it might not collect all needed numbers for the optimizer so the plan could be wrong.
The package dbms_stats is collecting all the figures that the optimizer needs to genererate an optimal access plan. All new database features are incorporated only here.
The statistics numbers can be found in the normal tables like USER|ALL|DBA_TABLES, ...TAB_COLUMNS, ...INDEXES, ...IND_COLUMNS etc. There you can find for instance number of rows in table, clustering factor for indexes and more numbers like this. They are not really needed for us human beings, they are used by the optimizer to generate the access plan.

How do I make ff4 update all currently open browsers when I move tabs around? It used to be automatic. Now I have to close all my brosers and reopen them for the change to take effect.

How can I make FF4 update all currently open browsers when I move tabs in 1 browser. The change used to be auto and applied to all open browsers last time. Now I need to close every open browser and reopen for the effect to take over.

I use that add-on. Works great.

HT1349 hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine.

When my husband and I try to share our libraries and import from each others libraries, we get as far as seeing the library on the screen. The next step is to look for the 'Show' menu at the bottom of the screen, but neither of us has any such thing. ?

When my husband and I try to import from each other's libraries, using Home Sharing, we are intructed to look for the "Show" menu at the bottom of the screen. Neither of us has anything like this on our screens. How and where do we locate it? We both have the latest itunes running.

Hey fantail163,
If you are not seeing the button to show menu, try out the troubleshooting steps for Home Sharing.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using Apple Support Communities.
Regards,
-Norm G.

On my iPod touch it says on the settings I have wifi but when I look for the 3 bars there is no wifi please help

On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. already suggested
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Looking for the classic "Bad Take" transition.

Similar Messages

Maybe you are looking for