Looking for the Proper WAAS Upgrade Path

A while back I started upgrading some of our WAAS 274/574 devices and once I got halfway through I relized I was on the wrong path to get the devices to accelerate and compress Native ICA for our Citrix sessions.
So Currently I have half our devices at 4.3.3c and the other half at 4.4.7
So my questions are....
What is the latest greatest version that I should be at for Native ICA Acceleration?
What is the best upgrade/downgrade path I should take to get there?

Dan,
It is recommended/required to run 4.2.1 (or a later version) before you install Version 5.3.1
You cannot upgrade from 4.0, 4.1, or 4.2 to 5.3.1 since it is NOT supported
Here you have a link about it:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v531/release/notes/ws531xrn.html#wp63349
Please see the hardware specifications
Hope this helps!
Jorge

Similar Messages

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

Problem with my program looking for the settings file in the wrong folder

I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
Edited by: ColNewman on Feb 5, 2008 6:55 PM

So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

Looking for 5.1.2 upgrade

Hi,
I am running FCP 5.1 on a PPC G5 and am (ugently) looking for the manual 5.1.2 upgrade.
I found a package (36 MB) for download at a site of a university but it will not install: a error message keeps popping up telling me to use Apple's automatic upgrade process.
Can anybody point me in the right direction?
Many thanks!
PS: an recent post pointed to Red Giant but the link has expired.

Sorry, 5.1.4 does not work for me, I really need 5.1.2. I work for a company that manufactures and sells equipment that runs in conjunction with FCP, and we have not yet tested with 5.1.4. For our equipment, the changes between different FCP versions are significant enough to put effort into finding just the right s/w.
Anyone?

Where can I download OSX Maverick. I'm looking for the link where there is the "download button" I can't find it!

Where can I download OSX Maverick? I'm looking for the link where there is the "download button" I can't find it! Please Help!

What is your current operating system? It needs to be at least Snow Leopard 10.6.8 in order to have the App Store available.
Which Mac are your trying to upgrade? It needs to be:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)

I have photoshop 5.5 and can't open .nef files. I am looking for the old plugin can anyone help?

I am looking for the photoshop 5.5 plugin to allow me to open my .nef camera files... can anyone help?

Other than upgrading PS, you might want to look into Nikon Capture. I have an older version, so do not know if it's still offered, and if it will handle your version of NEF's, as they change, hence the ARC upgrades for newer Nikon (and others) cameras.
Good luck,
Hunt

Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

Server crashed. How do I reset iPads so they stop looking for the server?

I was using the OSX Server app on an old Mac Mini when it crashed. A cart of iPads had been set up to use Profile Manager with the Device Enrollment Program part of Apple Mobile Deployment. I have deleted the server from the Device Enrollment Program, but my iPads are stuck in set up looking for the server. I am willing to put them back in Configurator at this point, but Configurator will not recognize them. Help!

Yes, MaxAuthTries is involved here as a limit, but -vvv should tell you more of what's going on...
Warning: Permanently added '[FQDN]:2336' (RSA) to the list of known hosts.
is normal for a new ssh connection.
Too many authentication failures for USER
usually means the password is wrong, or the ssh certificate is not accepted or not acceptable. Or that you might possibly have tried a large number of different logins, and bumped into MaxAuthTries.
Try an ssh from the client into the target box with the -vvv switch (and the proper target port, if you're not using 22 here), and see if you can duplicate the error. The -vvv turns on gonzo logging. Depending on what's going on, you might also have to turn on logging in sshd. That's usually a configuration file option within the context of the daemon.
For grins, I'd also check DNS services on both the client and the server; use sudo changeip -checkhostname on the server, and dig +short www.example.com (substitute the FQDN of the server) on the client.

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

Where to look for the computed stats collected using gather_table_stats

I have used analyze command before but new to gather_table_stats.
I have executed gather_table_stats procedure as given below. Now where to look for the statistics estimated and also what are the important parameters I need to look in the stats ? Any major difference between analyze & gather_table_stats ?
SQL> exec dbms_stats.gather_table_stats(ownname => 'TPDBS01A', tabname => 'x_TPD_STG_TL_SF_LEGAL_OWN
ER' , estimate_percent => 50, method_opt => 'for all indexed columns size auto');
PL/SQL procedure successfully completed.

The command "analyze table" is deprecated for gathering optimizer statistics. But it is still the only command to get for instance the chained rows. This command is no longer maintained for new features, so if you use this command to collect statistics, it might not collect all needed numbers for the optimizer so the plan could be wrong.
The package dbms_stats is collecting all the figures that the optimizer needs to genererate an optimal access plan. All new database features are incorporated only here.
The statistics numbers can be found in the normal tables like USER|ALL|DBA_TABLES, ...TAB_COLUMNS, ...INDEXES, ...IND_COLUMNS etc. There you can find for instance number of rows in table, clustering factor for indexes and more numbers like this. They are not really needed for us human beings, they are used by the optimizer to generate the access plan.

HT1349 hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine.

When my husband and I try to share our libraries and import from each others libraries, we get as far as seeing the library on the screen. The next step is to look for the 'Show' menu at the bottom of the screen, but neither of us has any such thing. ?

When my husband and I try to import from each other's libraries, using Home Sharing, we are intructed to look for the "Show" menu at the bottom of the screen. Neither of us has anything like this on our screens. How and where do we locate it? We both have the latest itunes running.

Hey fantail163,
If you are not seeing the button to show menu, try out the troubleshooting steps for Home Sharing.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Looking for the Proper WAAS Upgrade Path

Similar Messages

Maybe you are looking for