Looking for Toshiba C55DT-A5306 drivers

My laptop is a Toshiba Satellite C55DT-A5306 has a 64-bit AMD processor and it had Windows 8 pre-installed.
After realizing I didn't like Windows 8, I completeled wiped it out, disabled secure boot and enabled CSM in order to install Windows 7.
The operating system is running and it boots up perfectly, although I'm missing my drivers.
This site's driver download links are currently not working. Also, I noticed someone recommended using the Toshiba Europe site. Unfortunately, I can't find a computer close to my part #. My first 5 letters are PSCFWU.
Perhaps Im' exhausted of contacting Toshiba Customer Support and hearing the same response "It'll be up in an hour or two.".
Can someone please help?

General guidance for someone who might be attempting a windows 7 downgrade for this model - what worked for me.
Flashed bios to 1.4 to ensure preloaded version 1.80 wasn't optimized for a windows 8 efi environment - made no difference. (to test - no need)
Have to access advanced boot options from window 8 to get to the bios to turn off secure boot and enable legacy os
Used a third party tool on another machine (extracting the hard drive) to clean/format hard drive
Installed valid copy of windows 7 via usb tool
Included AMD Catalyst/chipset drivers loaded via usb (display adapter registers as AMD Radeon HD 8400/R3 series vs the toshiba prepackage AMD Display Driver standard vga) from the AMD site
http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64
(have to download the AMD chipset driver under the optional download tab also)
To get WIFI working - from Realtek - RTL8188CE driver worked for me
http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&DownType...
To get LAN working - from Realtek - PCIe Gigabit Ethernet NIC v7.092
http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeI...
From the Toshiba Support Site, the rest of the drivers found there.
http://support.toshiba.com/support/driversResults?freeText=1200007499
tc50155400e - smart card (although this device reports as working properly, tos1901 listed under problem devices hints this driver might need some work)
tc50158600d - Realtek Audio Driver (the DTS utility, along with this download - found to be superior to preload windows 8 sound quality and overall experience where ordinarily prefer not to resort to the use of software eq)
tc50156300g - for the Touchpad, etc - Synaptics Touchpad Driver
AMD Chipset drivers should be loaded first - installation can get finicky - on fail reinstall with attention to order of drivers loaded
Tried a few applications, Office/CS - a few youtubes - with windows 7 loaded seems to have some utility.Would prefer SSD over drive space and if it had a quality keyboard - would be happy.

Similar Messages

Iam looking for the Sony DAVDZ650 Bluetooth drivers for a Windows 7 64Bit

I have bought a Sony Music System model DAVDZ650 but i am unable to play music from my Notebook Dell E6430 running Windows 7 64Bit. Windows could not able to get the Bluetooth drivers for this System. Kindlt do the needful on where i can download the drivers.

Hi johnruge,
Welcome to the Sony Community!
Please check the Bluetooth profile of your Notebook. Here are the supported versions and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.1 + EDR (Enhanced Data Rate)
Supported Bluetooth profiles: A2DP (Advanced Audio Distribution Profile) AVRCP (Audio Video Remote Control Profile).
NOTE: The Bluetooth devices to be connected must support A2DP (Advanced Audio Distribution Profile).
If the issue goes unresolved, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
If my post answers your question, please mark it as "Accept as Solution"

Looking for Win7 Pro SP1 ISO & Drivers

Hi I recently purchased a refurbished 8470P and would like to upgrade to an SSD and clean install of Win7. There is a COA sticker. However, I don't have the Win7 ISO file and MS doesn't provide this anymore for people who did not purchase retail copy. Does HP provide Windows ISO files? If so, where can I download it? Also, is there a pack of drivers for the 8470P that are in one easy download...or do I need to hunt and peck for them individually?

Hi: As of February 2015, Microsoft only allows the W7 ISO downloads if you enter a retail product key on their website. Your only option would be to order a set of recovery disks from HP. If you live in the USA/Canada, call this number ... 1-800-334-5144. Have the serial number handy to give to the customer services rep.

Looking for all Vista drivers to Satellite A305-S6872

Hi i reinstalled Windows Vista retail
and i don't have devices configured
i'm looking for video, sound, ethernet, wireless,
My laptop:
Satellite A305-S6872
PSAG8U-02E018
thanks in advance !

Hi
The Satellite A305-S6872 seems to be a Toshiba US notebook and therefore you should take a look on the Toshiba US driver page:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
There you should find your notebook model and the drivers.
Cheers

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

I am looking for a app for my toshiba tablet (android) that i can use to transfer my ipod music

i am looking for an app for my toshiba tablet so i can trans music from nano to tablet

The wrong forum, in the wrong community. Try an andriod users site...
tt2

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

I'm looking for the drivers to dual boot OS X 10.8.1 and Windows 7.

Hey everyone, I'm looking for the drivers that are needed once you install windows. I've got to dual boot due to school. But, I don't ever remember getting a CD or anything with my mac and was hopping I could download them and burn them to a DVD

No, you don't need to install a software update for Lion if you are now running Mountain Lion.

Help! Windows looking for iPod drivers

Hello
I have just purchased 5th generation iPod (30g + video) and installed a brand new version of iTunes and Updater.
When I Inserted the USB connector Windows Informed me of new hardware and asked for its drivers I looked for a driver on the iPod CD but windows found none, and so I left it to look for automatic driver from windows, but it found no proper drive, I went to the device manager, iPod was listed under unknown device I uninstalled the device and iTunes etc.. and tried it all again with the same results, I ran windows update searched for viruses and spy\ad ware Nothing helped windows just does not recognized my iPod.
Can anyone help?!
Oh, also I had an iPod Mini (4G) that worked fine with my PC (Until it melted on the room heater thanks to my loving wife).
thanks Evie.

hi eyalev!
the techniques in this MarkJones post might be helpful:
http://discussions.apple.com/thread.jspa?messageID=2004249&#2004249
love, b

Looking for LabVIEW drivers for Aritsu MS462XX VNA?

I'm looking for LabVIEW drivers for the Anritsu model MS4623D Vector Network Analyzer? Have gone to Aritsu's site and downloaded their tools but no LabVIEW source found. The other thing is whether anyone's developed LabVIEW interfaces to theirTools (Navigator or Power Tools or SCE)???

Hi,
Unfortunately, we do not have an instrument specific driver for this Anritsu model MS4623D. Here is a link to the drivers we do have for Anritsu. We may be able to get communication to your device threw another means. How does your device communicate? For example is it GPIB or Serial. We may be able to use an NI driver and a programming manual for your device and communicate with it in LabVIEW threw this.
Regards
Krista S.
Applications Engineering
National Instruments

HT204135 what do you do if apple responds that the driver is unavailable. The problem is even if you have manually uploaded the drivers from the epson website, apple seems to need to look for them and if it doesn't work then you are stuck

I am trying to install an epson bx635fwd.
Connecting to the printer is fine and using the usb cable and network seems to work OK. The problem comes when I try and find the printer.
It pops up as a nearby printer but apple tries to look for the softwars on its own website. It then tells me this is unavailable.
I go to the epson website and upload the latest drivers.
When I try again, in system preferences, the same thing happens and I get a message that the software is unavailable from the apple website....etc..etc.
I am using 10.7 on a 24 inch imac, fully updated.
help please

When you select to add the printer, don't select the entry shown under Nearby Printers. Instead, select Add Printer or Scanner and from the new window that appears, select the Epson. If the Print Using menu does not change to the already installed driver and the search window appears, sometimes you have the option to skip this search and manually add the printer via the Print Using menu. If you are not given this option then trash the contents of the Epson folder in HD > Library > Printers. Then unplug the printers USB cable and reconnect. This should prompt the Mac to add the printer automatically and go looking for the driver which is available from Apple.

Vista looking for drivers and BSODs

I bought a 3TB MyCloud device a few months ago. I cannot get it to work properly with my Windows Vista desktop and support refused to help. They remoted in and accessed the device without using their software and claimed it was a Windows problem, not theirs. When I connect the device directly to my Ubee Wireless Router/Switch, Windows Vista immediately sees it as new hardware and tries to find drivers for it. Of course WD does not provide these. In Device Manager, it shows up under Other Devices with a warning indicator because there are no drivers installed. I was able to copy files to the device, but when I try to access them from the device, my Windows Vista desktop gets a BSOD (this happened after the call to support). I've now disconnected the device from my network as the constant BSODs damaged my computer. The device works with my Windows 8.1 computer, but has problems with my Sony Blu-Ray player connected wirelessly to the network. I've posted about this in a different thread. Is there a way to get this working properly with Windows Vista?

Bennor wrote:
The BSOD that other thread talks about appears to be related to using one of the WD apps, my guess is the WD My Cloud Desktop app on their Windows PC. There is a known issue for some who use the WD My Cloud Desktop app where once that app is opened, some users experience Windows Explorer crashing. There is one or two other threads covering this very specific Windows Explorer crashing issue related to that WD My Cloud Desktop app that affects a few users. Generally one does not need to install "drivers" to access the WD My Cloud. One should be able to access the WD My Cloud on their local network via Windows Explorer (NOT Internet Explorer). It will show up in the "Network Neighborhood" or under "Network". If it is not showing up under Network then check the network settings on both the Vista PC, ensuring it has the same Network Name/Network Workgroup (typically "workgroup") that the WD My Cloud uses under "Settings -> Network -> Network Workgroup". The other recommended suggestion is to configure the WD My Cloud for a static IP. Either within the WD My Cloud administration UI or within one's router/gateway. Both the Vista PC and the WD My Cloud should be in the same IP address subnet (for example both should have an IP address in the 192.168.1.x range). If you have not done so read through the WD My Cloud User Manual in particular "Using Windows XP/Vista/Windows 7" under "Getting to the Public Share" for the general procedure of accessing the WD My Cloud shared folders with Windows Explorer on Windows Vista.You and I are worlds apart on this issue. Your solution doesn't relate to my problem. I did not have a problem getting to or seeing the device in Vista. There were two problems and I believe I've cured both of them, though I don't know how. Problem 1: Vista keeps asking for drivers. When I connected the device to my network, Vista would see the device and try to locate drivers as if it had found a new printer. It couldn't find any so I had to close the driver request windows without finding drivers. The device then would show up in Device Manager under Other Devices with a yellow exclamation mark indicating the drivers were not loaded correctly. After several BSODs (for a different issue), I ran SFC and CHKDSK on my computer. Neither program found a problem. Then when I tried to connect the device again, Vista started looking for drivers and I walked away from the computer for the evening. When I had come back, it said the drivers were loaded. In Device Manager, Vista shows a new device category named "Western Digital NAS" with two devices installed: My Cloud Network Media Server and My Cloud Network Storage. The driver problem is now solved but I don't know how. Problem 2: Files I had loaded onto the shares to learn how to use the device can be seen in Windows Explorer. That was never a problem. However, as soon as I clicked on a file, the screen would scramble and then BSOD. This only occurred with files loaded onto the MyCloud device. After some blue screens, I started up into Safe Mode with Networking. I was able to click on the files without crashing, though Media Player wouldn't play them or even start in Safe Mode. I then did a clean boot and it tested okay. As I added items in MSCONFIG, the problem would not recur. There was one item that prevented me from even setting MSCONFIG to do a normal startup, and that was Kaspersky Internet Security 2015. Not only that, but I couldn't start the software at all. I did a complete removal of Kaspersky and then reinstalled it. I no longer have any BSODs. Both issues, as mysterious as they were, have mysteriously been resolved. I have a DLNA issue, but that's in another post. I also have a new issue with the WD My Cloud desktop app but I don't need to use that and if I do, I'll start a new discussion.

HT3669 xerox 6110 printer looking for drivers to support

i am looking for printer drivers to support my mac and my xerox 6110 printer

I managed to solve this problem just today. First, I downloaded:
Xerox Printer Drivers v2.1.1 for OS X
...which did not work. Then I managed to download the specific driver for the Xerox Phaser 6110 for MacOS X 10.8. I did it through the printer's web utility interface, which sent me to the appropriate Xerox web page.
This driver worked fine on my 10.8.3 installs on both my iMac and McBook. There was a note on the Xerox page that this software was a "recent addition", so it must have just come out.
Andreas

I am looking for a Fan control utility for Toshiba laptops

Hello,
I am looking for a fan control utility for toshiba laptops (like i8kfangui for example).
anybody help...

Hi
Toshiba does not provide special too for the fan controlling.
Only the Toshiba Power saver is available on the driver page.
This utility controls the settings for CPU processing speed, cooling method, screen brightness, etc
Maybe its a option for you

"I am looking for LabVIEW instrument drivers for a PTS 160 Frequency Synthesizer

looking for instrument driver for PTS 160 Frequency Synthesizer

"Unfortunately I was unable to find a driver for this instrument at http://ni.com/idnet. This leaves you with one of a couple options. It may be possible to modify an existing driver to work with this instrument. Otherwise, http://www.ni.com/devzone/idnet/other. htm states a few options to obtaining a driver. NI only writes drivers for standalone instruments in the eight IVI classes(DMMs, Scopes, Function Generators, Switches, Power Supplies, Power Meters, RF Signal Generators, and Spectral analyzers) that communicate via GPIB, Serial, or TCP/IP, so a driver cannot be written for your instrument. It would also be beneficial to notify the instrument manufacturer, they often have drivers for multiple programming languages. If they do not, you may want to hire an
Alliance Member to write an driver for you.
Alliance Member Directory
http://www.ni.com/alliance/ alliance_member.htm"

Looking for Toshiba C55DT-A530​6 drivers

Similar Messages

Maybe you are looking for

Looking for Toshiba C55DT-A5306 drivers