Looking for Twitter IP adress ranges
Hi!
I'm looking for a reliable collection of IP addresses or IP adress ranges of the Twitter network.
Does someone has some useful info on this?
Thank you in advance.
Last edited by maik-hro (2011-04-10 12:40:45)
http://osdir.com/ml/[email protected]/2010-03/msg00927.html wrote:
The addresses vary dynamically and the range is subject to change without notice at any time. You can observe typical values with ping or dig and enter these into your firewall. I'd suggest at least a /24 netmask, as you may not observe all the possible values within a given period. I'd also then expect periods of downtime with this security policy.
-John Kalucki
http://twitter.com/jkalucki
Infrastructure, Twitter Inc.
Similar Messages
-
Looking for local VRU-PIM TCP port
Hi Team,
I am setting a VRU-PG to connect an external IVR, however I couldn't find anywhere what is the TCP port number used by the vrupim.exe process to open our firewall port accordingly.
Is the VRU port dynamic ? "The port Port Utilization Guide for Cisco Unified Intelligent Contact ManagementEnterprise & Hosted Release 8.0" document mentions that for GED-125 the server Protocol/Port is TCP 5000–5001.
However in my case the local TCP port of vrupim.exe keeps changing. Whenever I cycle the PG it is changed to 1102, or 3352, 3407, 3443 etc..
Thanks & Regards
Nick
Note:Hi Sentil,
Thank you for your answer. The "VRUTcpServiceName" setting is indeed set to 3000. This is my remote port for my the
VRUIpHostName 10.173.33.143. However this is not what I am looking for.
I am looking for the local port range which is used by the the VRUPIM.EXE process which is at the moment 2481 (see belloww). This is because the is a firewall on the remote site, where the VRU server is located, and they need to know which are the ports to open.
C:\icm\pft\PG1A>netstat -bn
Active Connections
Proto Local Address Foreign Address State PID
TCP 10.157.124.37:1802 10.157.124.33:40002 ESTABLISHED 4964
[pgagent.exe]
TCP 10.157.124.37:1803 10.157.124.50:40017 ESTABLISHED 4964
[pgagent.exe]
TCP 10.157.124.37:1804 10.157.125.50:41003 ESTABLISHED 4964
[pgagent.exe]
TCP 10.157.124.37:1805 10.157.125.50:41017 ESTABLISHED 4964
[pgagent.exe]
TCP 10.157.124.37:1806 10.157.125.33:41002 ESTABLISHED 4964
[pgagent.exe]
TCP 10.157.124.37:1807 10.157.124.50:40003 ESTABLISHED 4964
[pgagent.exe]
TCP 10.157.124.37:2481 10.173.33.143:3000 ESTABLISHED 4560
[vrupim.exe]
TCP 10.157.124.37:3389 10.159.29.60:52247 ESTABLISHED 3340
TermService
[svchost.exe]
TCP 127.0.0.1:1069 127.0.0.1:7161 ESTABLISHED 3388
[msnsaagt.exe]
TCP 127.0.0.1:1076 127.0.0.1:7161 ESTABLISHED 3420
[cccaAgent.exe]
TCP 127.0.0.1:1077 127.0.0.1:7161 ESTABLISHED 3396
[hostagt.exe]
TCP 127.0.0.1:1138 127.0.0.1:7161 ESTABLISHED 3408
[sappagt.exe]
TCP 127.0.0.1:7161 127.0.0.1:1069 ESTABLISHED 3380
[snmpdm.exe]
TCP 127.0.0.1:7161 127.0.0.1:1077 ESTABLISHED 3380
[snmpdm.exe]
TCP 127.0.0.1:7161 127.0.0.1:1076 ESTABLISHED 3380
[snmpdm.exe]
TCP 127.0.0.1:7161 127.0.0.1:1138 ESTABLISHED 3380
[snmpdm.exe]
TCP 10.157.124.37:1062 10.157.124.42:389 CLOSE_WAIT 3048
[DiagFwSvc.exe]
C:\icm\pft\PG1A>
Regards
Nick -
I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer
Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair -
Looking for a high-res drawing app for the iPad
I've tried a few of the available iPad drawing apps like Sketchbook Pro and Brushes. It's a little hard to tell, because documentation tends to be short on details, but it appears that most of them (with the exception of Brushes) only let you work and export images at 1024 by 768 resolution. That isn't really high enough resolution for professional work.
Brushes is the only exception I've found. You work on the iPad in Brushes at 1024 by 768, but they have this OS X app that can convert your exported images to a higher res.
To me that's crazy awkward and time-consuming, and I think Brushes is OK as a drawing app, but not necessarily what I'm looking for.
Can anyone give me some better insight into the matter?
Is there some underlying technical reason that all of these apps have a hard limit of 1024 by 768 resolution?
Is there an app other than Brushes that can produce pro-level (high resolution) image files on the iPad?
Thanks,
JSYubz Magnum really has great sound. They come in four colors too.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
MacOSG: An Apple User Group iTunes: MacOSG Podcast Follow us on Twitter: MacOSG -
I'm looking for a bluetooth remote for iPad's iBooks app
I'm looking for a bluetooth remote that will allow me to flip the pages of a book in the iBooks app.
Does anybody know of such a thing? I have found remotes for the iPad, but they seem obscure as to what it can accomplish. I need something more than something that plays iTunes remotely. I have a specific need.
Any advice or suggestions will be greatly appreciated.Yubz Magnum really has great sound. They come in four colors too.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
MacOSG: An Apple User Group iTunes: MacOSG Podcast Follow us on Twitter: MacOSG -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
Hi I am looking for a way to have trace32 open multiple files on remote computers
Simply put I am looking for someone who could afford to give me a basic script (vbs) that I could run from an elevated command prompt. It would need to be available for me to type in the name of a remote computer or (mulitple if possible) and also
allow me to choose log files to open or multiple files and then open them using trace 32. Hopefully it would detect the available log files and show me what is available to choose to open... anyone know of such a thing or know how to go about setting up something
like this for people to use?
EDIT
I was able to create a basic script to do what I wanted but I want to be able to add wildcards for the rollover logs... Can someone suggest the easiest way to do that as I am not sure how to add the wildcards directly before the .log
here is the script.
' ******Created by Luis Delgado*********
'This script will get a remote computers .log files depending on which documents you enter in the "files to open on remote computer using trace32" section
'Get and open log files on remote Computer
on error resume next
Set WshShell = Wscript.CreateObject("Wscript.Shell")
strcomputer = inputbox("Enter remote computer name or leave as localhost for this computer","Get log files from a remote computer with Trace32","Localhost")
If strComputer = "" Then
WScript.Quit
End If
'Opens trace32
wshShell.run "C:\Program Files\ConfigMgr 2007 Toolkit\CCM Tools\Trace32.exe"
'Files to open on remote computer using trace32
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\datatransferservice.log"
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\ccmexec.log"
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\locationservices.log"
!!!!NOTE!!!
What I need is for any file that starts with datatransferservices, ccmexec, or locationservices to open in trace32
my thought would be place a wild card in its respective spots but it does not work see below
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\datatransferservice*.log"
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\ccmexec*.log"
wshShell.Run "\\" & strcomputer & "\c$\Windows\System32\CCM\Logs\locationservices*.log"The roll over logs all have the same name exact the extension is .lo_ , So.. I'm not sure what you are looking for.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Hi
We are looking at placing iPads in our offices but need to understand the printing options available? I have a number of questions?
1/ Would I be able to print to a networked printer?
2/ what would be the best WIFI Printer available for extensive printing?
3/ Are there any other printing options available?
Thank you in advance!The roll over logs all have the same name exact the extension is .lo_ , So.. I'm not sure what you are looking for.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Looking for something in the iPad/iPhone Airport App
Hi
I have been waiting for the airport utility for iPad/iPhone to come as I frequently travel with just my iPad and Airport Express. However, I have been unable to configure it when away from home.
So, Apple has released a utility but it appears to be the most important feature for being on the road, that is, the ability to switch connection sharing (so you can hook up to a hotel system).
Is it that I can't find it or it doesn't allow you to do it. In the iPad app, I am looking for the ability to switch between bridge mode and the other two.
Thanks,
AndrewTesserex, thanks for the comment . Can you point to where in the utility I cna figure it to
Share a public IP address
Distribute a range of IP addresses, or
Be off in Bridge mode?
Thanks,I can't work it out.
Re: Looking for something in the iPad/iPhone Airport App
created by Tesserax in AirPort - View the full discussion
The AirPort Utility App that is available with iOS 5 does pretty much everything that the Mac or PC versions do including controlling both the NAT & DHCP services to allow you reconfigure an AirPort as a bridge. -
Looking for DPS designer and developper freelancer
Hi everybody
i've got a very interesting project to deliver
I am looking for freelancers who have a very good experience working on DPS and Idesign, here is the brief, if you think you can help and want to make good money please shout: [email protected]
BRIEF
objective:
create a digital version of 3 print magazines about home design and crafting : Ipad / android tablets and flash desktop
tool:
Adobe digital publishing suite, Indesign extension (software already used by the company) to :
- Recontextualize / files the Indesign files my companie ueses to create folios / templates adapted/intended for the digital version of the magazines.
- To sell digital magazines directly on the app store, marketplace, and others.
Mission:
- Create a whole range of folios / template that fits the style and the reading experience of each magazine.
- Integrate the icons, multimedia and other elements created specifically for the digital version
- Take the items Indesign files that have been done for the paper magazine version for the first quarter 2013 and lay them out entirely in the digital version.
- assist on how to use DPS from folios creation to sales with a person specially recruited within my company and enable him to build digital versions every quarter without too much assistance.We are based in NYC and we would need somebody to work out of our offices.
-
Looking for a app that will go out and get all my credit card balances.
I am looking for a App that can go on all the web sites for my Credit Cards and download the balance Interest Rate Payment.....
Anyone know of a good one?I recommend that instead of working on an iPad application you get a good web programmer in and set up a web-facing system that can be used from anything with a web browser -- an iPad, a smartphone, a laptop or a desktop. Then your employees can access the system from any computer with a web browser, and you don't need to employ an expensive specialist programmer to produce a system which is useless for devices made by other manufacturers. The only requirement for use will be that your devices must in range of either WiFi or a phone signal.
It will also mean that if you need to change your software at any time you only have to change one copy, back at headquarters, rather than update an App on every individual iPad.
Apple's web browsers (including the ones built into iDevices) allow a web site to request the user's location, so people using an iPad should be able to do the things you have asked for. -
Looking for a drum loop app that will run in the background. What are you using?
Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.
That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
Looking for a wireless A4, edge to edge mac compatible printer
Looking for a wireless A4, edge to edge mac compatible printer? can anyone reccomend something which really works well with Mac?
I would get an A3 but I am guessing that A4 edge to edge would be better?
I need edge to edge as I design A4 brochures and I need to make 100% size mock ups.
thanks in advanceHello gumbsali,
Most or our current model printers are compatible with the Mac OS X Mountain Lion operating system; so we can provide you with the best recommendation, please reply with the following information:
1. Will you need to have faxing ability?
2. What is the largest size paper you will need to print?
3. Will you need the ability to scan 35 mm slides or film?
4. Will you need the ability to scan?
5. Is there a specific price range you are looking to stay within?
6. Will you need the option of using the printer wirelessly?
7. How many pages a month do you estimate you will be printing?
8. What is the heaviest weight (in lbs) of paper (or cardstock) that you plan on using in the printer?
9. Will you need the ability to have the printer interface with an iPad, iPhone or Android phone?
10. Will you need the ability to print photos and images directly from a memory card?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Looking for a sports video camera that is compatible with the mac
Looking for a video camera that can record sports well and is also compatible with the mac. I've been using iMovie to edit videos for a highlight reel of my highschool soccer games that I coach.
I like Sony HD MiniDV (HDV) Handycam Camcorder - HDRFX1000, but I have also used several older Sony (DCR-TRV17 and DCR-TRV70) and Canon (VIXIA HV20, VIXIA HV30, and VIXIA HV40) tape-based Firewire-equipped camcorders with good results.
I prefer tape-based Firewire-equipped cameras because of their IEEE 1394 transfer speed, compatibility with iMovie HD, and ability to serve as the source recording directly into iMovie when desired. If none of these characteristics is important to you, other Mac-compatible camcorders with suitable zoom ranges and lens speeds for the light levels you encounter should also do nicely for recording at your games.
You do not say which iMovie version you are using, but you can find about known compatible camcorders by searching for the info in a search like this one.
Message was edited by: EZ Jim
Mac OSX 10.9
Maybe you are looking for
-
After I close the window/s the report error window pops up . Then the next one which tells me the report was sent. Then the options to go further and so I came here today and Now I have done what you said to do so far. I even updated Acrobat reader a
-
Transferring iTunes - is there a way to fix this?
I'm a senior lady, please be gentle! I wanted to copy my iTunes library on my iMac to my new MacBook Air so I'd have everything on both computers. I went here: http://support.apple.com/kb/HT4527 -- and walked through the steps for transferring via
-
I was typing notes at my church, I had typed 20 paragraphs and when I looked down to the Ipad, I noticed that the note sheet was blank...I am not sure if I leaned over and with my belt buckle press the trash can and then delete since I have the optio
-
How do I enable Lync in Outlook for the Mac?
I'm trying to help our my boss remotely to get Lync to work on his Mac. I have a PC so the Outlook is just different enough I can't find the correct information to help. Thanks!
-
What are performance limits for HFM 11.1 64-bit?
Hello All, Does anybody tried subj or have any Oracle/Hyperion materials about 64-bit version? How much RAM can HFM 64-bit take? (32-bit one could eat 2GB only) What it recommended limit for base records number in sub-cubes? Thank you in advance.