Looking for Upgrade Disk: 32bit, Vista to Windows 7 Home Premium

Hi,
Computer novice here. Accidently ordered x64bit and need the x32.
Best case scenario:
Anyone in the Cumming GA area who could let me borrow their upgrade disc?
Spoke to Lenovo help and they said can't send me the correct disk becuse the upgrade program has ended. OK to use someone elses upgrade disc though as it's based on the serial number (?) in computer.
2nd best case scenario:
Would someone be willing to mail me the disc to borrow?
Thanks in advance,
CJ
P.S. I have an A600 if that matters with Vista x32.
P.S.S. Oops! I need the Windows 7 Home Premium update disc x32. Thanks

Ok, I tried this and it said I needed to download and install Nvidia graphics driver version 309.08, I downloaded and installed this version just fine. I done option 2 again and now it says download and install version 353.30. I download this version but got an error when I tried to install it that says THIS GRAPHICS DRIVER COULD NOT FIND COMPATIBLE GRAPHICS HARDWARE. Do you know what I should do now to fix this?

Similar Messages

Time Machine stuck at "Looking for backup disk" after installing Windows 8 via Boot Camp

I've been backing up via Time Machine to an external USB drive and it's been working fine. I recenty installed Windows 8 via Boot Camp and now TM gets stuck forever at "Looking for backup disk...".
I've tried the following, to no avail:
Using "Select Disk" in TM preferences to re-select the disk
Deleting /Library/Preferences/com.apple.TimeMachine.plist
Running system maintenance via Onyx
Resetting PRAM
Formatting the drive and setting it up for TM backups again
The Boot Camp partition is on the same drive as OS X (on a 180GB Intel 330 series SSD). During the Windows installation I re-formatted the partition as NTFS.
If I start OS X in Safe Boot mode, TM backups work. In Safe Boot mode, the NTFS partition isn't loaded so I suspect it has something to do with this. Any ideas would be greatly appreciated.

I installed Paragon NTFS for Mac and it started working all of a sudden.

Internal Time Machine "looking for backup disk" (not time capsule)

Hello,
I have the infamous "looking for backup disk" issue. My Time Machine drive is an internal drive, NOT a time capsule. It is mounted and visible, and the backups show up on it in the Finder. When I select to enter the Time Machine "starfield" UI, all my previous backups are browsable. But when it comes time to actually back up... it just says "looking for backup disk" forever. I've tried leaving it like that for something like 40 minutes, no joy. This is not a huge disk, there are about 700 GB of backups on it. The HDD activity light on my computer is NOT showing any activity when I am idling but it is "looking for backup disk," so I don't think it's scanning the drive or anything.
I have tried turning TM off and on, removing the drive and re-selecting it, unmounting it and remounting it, deleting the TM preference plist file from the library, rebooting, and all manner of combinations thereof. Nothing seems to work.
Anyone have any advice? This is on OS X 10.8.2 by the way. The TM backup worked fine through 10.8.1 and 10.8.2 with no problems until now. I don't recall doing anything specific to mess up TM or the disks in any way, although I may have turned TM during a reboot cycle prior to this happening (don't recall if this is actually the case, but in any case it shouldn't have caused such an error, no?).
Thanks in advance,
—Gabriel

[Just a note, TM only works on OS X Journaled drives (i.e. HFS+ drives). TM does not back up your FAT drive.]
Isaac:
If you unloaded the NTFS and FAT kexts, your TM backups might (might!) work again, but of course in that case you would not be able to see your FAT or NTFS drives in OS X, and if you removed the FAT kext then a lot of USB keys would be unreadable in OS X - not a good solution.
The kexts are specific to OS X, so removing them should not affect Windows... but may affect boot camp, I don't know how boot camp is programmed (which would be a problem). Luckily if your Windows drive became inaccessable from boot camp with removed kexts, it should be easy enough to simply boot back into OS X, restore the kexts, and then Windows should work again.
I would recommend not mixing partition types on drives with shared OSX/Win functions, it seems to "tempt fate" as it were with possible errors. I don't know what has precipitated this error in your case, if it was the MSE or disk error or something else, and unfortunately I don't have a real fix to offer beyond trying things with the kexts removed and seeing if they work.
NOTE THAT THIS IS AT YOUR OWN RISK, messing with kexts is not a very recommendable practice since these files enable core functionality in the OS. Make a backup before if you can, and consider your options carefully. In OS X, navigate to /System/Library/Extensions and you'll find a bunch kext files. The two you need are msdosfs.kext and ntfs.kext. Copy ntfs.kext into a backup folder (e.g., on your desktop). Delete the original ntfs.kext from the S/L/E folder. Reboot and see if you can still access windows. If so, reboot into OS X and see if Time Machine works again. If you're good on both those points, then consider going without ntfs.kext on a permanent basis – it is rare that you need to read an NTFS drive while in OS X. On the other hand, if this does not fix your problem, you may try restoring ntfs.kext, and backing up / deleting msdosfs.kext to see if THAT is the culprit. Unfortunately, if msdosfs.kext is causing the TM error, you're kind of out of luck, since going without FAT access will be pretty annoying any time you need to use a drive to swap files between Windows and Mac (using a USB key).
Ultimately I don't have a solution, as I have noted, so much as I've narrowed down where the error is occuring in some peoples' cases (like my own). Good luck!

Time Machine stuck at "Looking for backup disk"

I've been backing up via Time Machine to an external USB drive and it's been working fine. I recenty installed Windows 8 via Boot Camp and now TM gets stuck forever at "Looking for backup disk...".
I've tried the following, to no avail:
Using "Select Disk" in TM preferences to re-select the disk
Deleting /Library/Preferences/com.apple.TimeMachine.plist
Running system maintenance via Onyx
Resetting PRAM
Formatting the drive and setting it up for TM backups again
The Boot Camp partition is on the same drive as OS X (on a 180GB Intel 330 series SSD). During the Windows installation I re-formatted the partition as NTFS.
If I start OS X in Safe Boot mode, TM backups work. In Safe Boot mode, the NTFS partition isn't loaded so I suspect it has something to do with this. Any ideas would be greatly appreciated.

I'm going to assume during the install setup of Windows, you deleted the partition made by Apple and created your own and formatted in NTFS. This is probably the cause as to what happened.
Try this:
1. backup anything you did in Windows 8.
2. In Boot Camp, remove the Windows Partition. Reboot when prompted.
3. Try and see if Time Machine works again.
If its working, create a bootcamp partition and re-install Windows. Do not delete the partitions that Boot Camp created. See if TM works again after that.

I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!

I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.

Time Capsule "looking for backup disk" problems, running Lion on 24" iMac

Hi,
I'm having problems with my Time Capsule. I can't get the backups to run for about a week. The backup just says "looking for backup disk" for ever. This is a first gen Time Capsule, and it's still working fine for two MacBooks in the house. I have all the Apple updates installed, and I'm running 10.7.2. In Preferences, Time Capsule, I can see the available/of space and there is plenty left. It's not showing any Oldest and Latest date info for backups.
If I go to "select disk" and choose the Time Capsule, I'm prompted for the password. When I press "Connect", the message changes to "Stopping Backup" and this will run for ever. I have plenty of disk space available, have repaired permissions, have booted in safe mode, reset pram and nvram and probably a few other options to no avail. I can enter the Time Machine and see all of my backups without problem.
As a side note, I have also noticed instability whereby various programs have been 'not responding' of late, and need to be force quit. Once that happens, the iMac won't properly shut down and restart; I usually need to how down the power button.
Thanks in advance for your help.

I'm having the same problem. Anyone have a fix?
Nozz

Time Machine looking for backup disk/not finding

Time Machine backed up the HD on my 2009 20" iMac up till Feb. 4 when I downloaded Since then there have been no new backups of my HD and there have been problems wihen I have Time Machine "on" with other applications (TextEdit, Pages, Adobe Bridge CS4) opening or not responding after being open and with Finder not responding. I have also had grey screen freezes multiple times so that I have to use the power button to shut the computer down. When I take TM off of the Automatic backups, most of the problems with applications quitting and the grey screen freezes stop happening. (Although I believe I've had at least one or two grey screen freezes even then.)
Today I've run Verify Time Machine Backups. It completed that. Then I turned on Automatic Backups again. But then it showed "Looking for Backup Disk". So I selected the Backup Disk. Then I checked back in a while and it still showed Looking for Backup Disk. I removed the selected backup disk, shut down and rebooted, and reselected the backup disk. It is still showing Looking for Backup Disk.
The Time Machine is a 1 Terabyte size. My iMac is using 203.6 Gigabytes of its 319.21 G space.
In looking at what my Finder is showing as the name of my Backup Disk, I see that it is showing my Backup Disk as Virginia's Computer (3). It should be showing my Backup Disk as Virginia's Computer. If this is the source of the problem, how do I get my Backup Disk named back to Virginia's Computer? Is it possible to get it changed back?
My TM is used as a router for two iMacs and up through Feb. 4 I was sharing files between both computers. When the problems started, I turned off File Sharing in the other computer (Jim's iMac). I had noticed that frequently my computer's name as shown on the other computer would be changed to Virginia's Computer (2) or Virginia's Computer (3) and I would change it back when I noticed. Perhaps this is how the problem started.

I finally contacted Apple Support. Three support people and seven and a half hours later Time Machine began working correctly. Multiple things were tried. The Time Capsule ended up getting erased. Many files and folders were deleted from several places on my hard drive. It seemed that the final ones that made a difference after the Time Capsule was erased were files that were in my Keychain.
I have to thank Apple's Support people for persistence, especially Jim who is the one who got things back to normal as far as the Time Capsule & Time Machine goes. I have to keep watch to see if anything acts up now on my hard drive and then the solution will go further. But the issue with the Time Capsule and Time Machine appears to be resolved!
Thank you, Apple Support!!!

Stuck in "Looking for Backup Disk" in Time Machine with Time Capsule

I too am having a "Looking for Backup Disk" message going on forever . . . .
I have the following showing in my log (which is for a backup that started almost 6 hours ago . . .)
Starting automatic backup
Attempting to mount network destination URL: afp://Toni%20Way;AUTH=[email protected]/Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://Toni%20Way;AUTH=[email protected]/Data
Disk image /Volumes/Data/Toni’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
I am not getting successful backups. I first thought it was a problem with the WD hard drive I had so I invested in a Time Capsule thinking maybe it would work better with the Mac (i.e. Apple to Apple). I got a few successful backups when I got the Time Machine on June 12th but none since. I only just noticed that I wasn't having successful backups as there was no notification. I have tried a Full Reset as per these instructions with no success:
http://pondini.org/TM/A4.html
Help!

I've successfully changed the name of the Time Capsule to "Toni TC" but still no success. It is still sticking at Looking for Backup Disk.
Still have a space in the name.. No spaces. No non-alphanumeric.
Not that I think that is your problem.
From the log the actual unit is mounted and you have everything working but not actually able to copy packets across the network.
I have an ethernet cable running from my cable provider's router to the Time Capsule and then an ethernet cable running from the Time Capsule to the iMac.
This is good... also turn off wireless in the computer to force connection by ethernet only.
But when I go into Disk Utility, it isn't listed in the left hand side.
Only the sparsebundle will list and only when it is mounted.. TC is a network drive not a local drive. It will not show up in disk utility.
Let me suggest you erase the TC and start over.. sometimes it is the only way to get things going again.
A4 reset of TM. http://pondini.org/TM/Troubleshooting.html
And do a verify of the local disk.. A5.
I would also like you to test copying a single large file to the TC.. create a new directory in the TC from finder.. and copy a single large file.. 1GB sort of size and get actual speed measurement from Activity Monitor.

HT201250 I had turned off the time machine auto back up and now when I try to turn it back on it keeps looking for a disk even though the time capsule is shown, do I have to set it up again as an initial?

I have been using the time capsule to back up both my iMac and recently added MacAir, it has been working fine but recentlky I had turned the time machine off on the Macair and now when I try to turn it back on it keeps looking for a disk even if I select the time capsule. Do I have to start the backup for the Macair as a new backup?

That happened to my brother earlier. He went into Facebooand then into another app and the same thing happened. he ended up having to restore it. Mine stayed with the Apple logo for a bit but its back to normal after pressing the buttons a million times. I hope you get your problem sorted. Goodluck!

I am looking for a way to disable the windows ct

rl-alt-del function in a LabVIEW 6.0 VI. I also need to disable the bottom task bar including the Start key in Windows NT 4.0. My goal is to keep the VI exclusively on the screen and disable the users from switching to other programs or shut off the PC.

rl-alt-del function in a LabVIEW 6.0 VI. I also need to disable the bottom task bar including the Start key in Windows NT 4.0. My goal is to keep the VI exclusively on the screen and disable the users from switching to other programs or shut off the PC.Public libraries use applications like WinSelect to lock down access to machines.
http://www.winselect.com/
But control-alt-delete in NT4.0 is a kernel level security feature that can't be
defeated unless you hide the keyboard. By using registry settings you can
control what is presented to the user after he hits control-alt-delete and keep
him/her from shutting down, but you will also have to lock up the computer to keep
your users from hitting the reset button and hide the mouse.
If you want to boot up an NT environment without a keyboard and mouse
you will need to go to NT Embedded. NTE allows you to build a custom
OS that does not require keyboard or mouse to boot. You can also install
just the components you need, ie; no browser, menus, control panel, etc.
Regards,
Alan
"Dan Huynh" wrote in message news:[email protected]..
> I am looking for a way to disable the windows ctrl-alt-del function in
> a LabVIEW 6.0 VI. I also need to disable the bottom task bar
> including the Start key in Windows NT 4.0. My goal is to keep the VI
> exclusively on the screen and disable the users from switching to
> other programs or shut off the PC.
>
>

Time Machine "Looking for Backup Disk...." to Synology NAS

My time machine used to work well connected from my Macbook Pro (10.8.3) connected to my Synology NAS then suddenly stopped working a while ago.
I have finally got around to looking at it but cannot seem to get it to rework
I folloed all instructions on the http://pondini.org/TM/A4.html full reset option but without success.
I can view all the previous backups on the NAS by entering Time Machine but when trying to backup again now continually get "Looking for Backup Disk...."
Any ideas?

This happens when you backup to a non-apple device.. actually a TC in particular is the only apple supported network device for TM.
Did you try a reboot of the whole network.. and you can verify the backups .. see A5 in pondiini.
The same thing happens even on a USB drive plugged into an Airport Extreme. It can work fine for ages and then just suddenly refuses to connect.
See http://pondini.org/TM/Airport.html
Did this happen when you updated to 10.8.3.. does the date of the last backup correspond to the update? It would not surprise me if they did some little tweak that took out your non-authorised backup method.
Now I have not tried it but lots of these issues started with Lion when the security level in AFP was changed. Security for a file protocol is irrelevant on your local network so really only relevant to using BTMM and iCloud.. which was also introduced with Lion.. that is when everything went to pot.
I would look at the Synology as running better at the older level of security and making the adjustments required on your computer.
See http://support.apple.com/kb/ht4700
I have a NAS and I have the same issue happen a couple of times. I am still using Snow Leopard though so the above suggestion is not a cure all.. I think you just have to accept that Apple builds a walled garden.. if you try and step out of the garden.. anything over the wall.. can be expected to behave badly on occasions. Set up another folder on the synology and start a new TM backup. Or use CCC or superduper etc..

Looking to upgrade from Adobe Creative Suite 3 Production Premium to the latest.

I am looking to upgrade from Adobe Creative Suite 3 Production Premium to the latest. We are running on an isolated network without access to the Internet. Looking for advise on how best to proceed.

As far as upgrading goes, you will not have that option for CS3 as it is not in the upgrade path for CS6. You will have to purchase the full version of CS6. I don't know if buying the disk is still an option, but if you have to you can download the installation file(s) and copy to a removeable media and install using that. In order to activate it you will have to perform an offline activation.
Here are some links that might be of help...
Creative Suite 6
Offline Activation

Trouble installing Vista 64 bit home premium

I am trying to use boot camp to install Vista 64 bit home premium. The disk is a full install. Boot camp works fine, but when I insert the windows disk and attempt to boot off of it, I am confronted with a screen that gives me two options with no names, labeled only 1 and 2, and instructions to select a CD boot type. However, I cannot select any of them because my keyboard does not work! I have tried several times, with several partition sizes, and even brought out an old USB Microsoft keyboard, which is still not recognized. I have done this with only non-apple peripherals, as well - microsoft mouse, acer monitor, and all USB devices plugged directly into the back of the computer. I have not seen this problem listed anywhere else, so can anyone here help me? I have looked everywhere. Thank you.

It is an issue iwth our older EFI 1.x (or EFI32) and Vista SP1 64-bit that needs UEFI 2.x (EFI64).
Sort of the same issue as the Nvidia 8800GT had to come out in two flavors.
I have Windows already installed, older pre-SP1, and from there I can install SP1 DVD.
At this point, I much prefer Windows 7 over Vista x64 SP1 or SP2(beta). Just runs better. Last day tomorrow maybe to download.

Boot camp (vista 64-bit home premium) not seeing both my CPUs

so i just received my mac pro =) base config with 8800GT.
i just installed windows vista 64-bit home premium via boot camp. everything is going fine, it's just when i open task manager, it only sees four cores instead of all eight. is it because i have home premium, not business or ultimate? or is something wrong? thanks!

Programs that support 64-bit Vista (few are being updated or written for Pro) show better performance - cleaning up code base and adding features, that you won't find in 32-bit.
There are Vista and MS newsgroups that deal just with games.
http://windowshelp.microsoft.com/communities/newsgroups/en-us/default.mspx
http://www.vistax64.com/

Prints too dark after moving to vista 64 bit home premium

Hi,
I have a photosmart d7360 printer that used to produce brilliant prints when i had windows XP. I have since purchased a new PC with vista 64 bit home premium and my prints are now very dark. Can anyone please suggest a solution??
thanks.

did you find a solution for this problem? I am having the exact same problem.

Looking for Upgrade Disk: 32bit, Vista to Windows 7 Home Premium

Similar Messages

Maybe you are looking for