Looking for VI for single unit electrophysiology

Hi,
I'm interested in using Labview to record single unit activity in vivo.
Any experience out there? Any VI's you're willing to share to smooth the
path?
Thanks in advance.
-FL
Fred A. Lado, MD PhD tel: 718-430-2469 / 2477
Albert Einstein College of Medicine fax: 718-430-8899
Kennedy 313 email: [email protected]
1410 Pelham Parkway South
Bronx, NY 10461

Appears to be right, but don't forget to round to the nearest integer.
http://zone.ni.com/reference/en-XX/help/371361H-01/glang/round_to_nearest/
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Similar Messages

Looking for Audio Units

Good day to all and thank you for your time.
_Can't get enough sounds!!!!_
I'm currently creating most of my projects with Logic's Sound Banks and Vienna Orch, however, they are starting to get boring. And knowing how expensive(expansive, too) these banks could get, does anyone know any spectacular sound banks that's worthwhile? (Looking into a lot of Eastwest ones right now, still contemplating..) How about outboard ones like a YAMAHA Motif rack? Mainly looking for drums and keys, please and thank you!!
Additionally, I now have a couple of projects near completion and I'm looking into digital solutions to my mixdown, so has anyone found any good mixing tools/Plug-ins(Audio Units) that are better than Logic's Factory Plug-ins? (Preferably with mastering capabilities as well. And I personally do think Space Designer is top notch! Just wanted to know if there're any better out there.)
As always, thanks in advance for all suggestions!
One,
Rex.

Native Instruments' Komplete bundle will provide a huge library of sounds:
KONTAKT 3 - sampler comes with 30GB of sounds on its own and it also provides the engine for MANY 3rd party sample libraries.
MASSIVE, ABSYNTH, FM8, PRO-53 - More synth sounds than you'll know what to do with
BATTERY 3 - drum sampler with a bunch of included drums, with the option of adding more
REAKTOR 5 - A modular synth, sampler, audio processing, etc... thing. You can create your own audio thingies if you dare take the time to learn how to, or just use the included thingies or download over 1,000 user-created thingies with your Native Instruments account. I can't say enough about Reaktor.
Additionally, I now have a couple of projects near completion and I'm looking into digital solutions to my mixdown, so has anyone found any good mixing tools/Plug-ins(Audio Units) that are better than Logic's Factory Plug-ins?
Many, many things. I like my Universal Audio UAD plugins, Sonnox, PSP Audioware. There are so many more.

Looking for single song and not an album

I purchased a song that later I realized was Karoake and it would not play the vocal on my car radio. I don't mind buying another copy of the song in the version that is not Karoake, but can't find another copy except having to buy an entire album. How can I find out if there is a copy of the song in a single and not an entire album? What I'm looking for is "There You'll Be" by Faith Hill. Thanks so much
HP Windows XP

I've done that and the only thing that turns up for this song says you have to buy the entire album soundtrack. I would have thought that you could buy just the single song - but certainly can't find it. In the meantime I have bought a song that says "karaoke" and when I play on my computer I can hear the vocal. When I play it in my car, I can only hear the background music. I can't make any sense out of this. When a song says "karaoke" does it mean that it is only the background music? That is what is confusing.

Single unit price for import purchase

hi gurus
my client is procuring material from china so over head like purchase price,custom,clearing charges transportation and insurance come into picture.then while calculating costing he distribute the overheads proportionately base on product quantity.
by adding all the costs for single unit client calculates per unit cost.
how to do it in SAP???

Many Many ways.
You do not say whether it is for costing purposes, or for purchase order purposes?
On PO you would add all costs using condition types. It also depends on whether you are shipping cost documents, or not, handling unit management or not.
On costing side it depends on the business requirements: Plan price is usually used as input to the costing, if more etailed is required a raw material cost estimate can be created.

Looking for iPod speaker unit with CD/FM and Line-in

Can't think of where else to post this question:
I'm looking for some sort of speaker unit that has:
1) iPod dock
2) CD player
3) FM radio
4) Line in jack (for, say, satellite radio)
It could be a boom box, or something more substantial.
Has anyone seen an item like this?
Thanks...

In my personal opinion, there are many products in the market, but almost 80% not satisfy my requirement. I like this most i.e. iPod HiFi, but Apple has stopped to produce this. You probably get it in the secondary market
http://www.amazon.com/Apple-Hi-Fi-Home-Stereo-White/dp/B000BKBYY0

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

Looking for a way to share a single library among two computer

Ok here is the issue... I have a MB and MBP and I like to take the pro with me to work and such... Right now my itunes library on the pro is located on my USB drive connected to my airport extreme. my gf's is connected to her own on her laptop. now I want to be able to have her use my library when im not there.
these are the only two option i can think of
- Stream from my external to apple tv without my itunes open (Which as far as i know is impossible)
- make the itunes folder I have on the external her itunes folder aswell (Only problem is when adding more files we would have to manually update the XML file .. im looking for something more automatic)
- do the above and alias the XML file (Which wont work because i would have to be there in order for that to work which defeats the point)

Well - you answered your own question, didn't you? Since a and c are not viable, b is the best way to to it. And you're right, each of you has to maintain your libraries manually. For example, create a folder "New Stuff" on the disk that you put new files into, and empty it when you both have added the content to your libraries (with iTunes' copying option on, of course.)

Looking for a laser multi-function unit with duplexing

I had bought a Canon MF4350d for my MacPro with Snow Leopard but having trouble scanning and would like to purchase an alternate device. The features I'm looking for are scanner with sheet feeder, duplex (2-sided) laser printing, fax, and copier (also 2-sided).
Any suggestions? This is for home office use.

Hi Jack, I know nothing about it, but offer this as something to possibly investigate.
I use PaageStream, which has Custom Screen settings...
Might try the Demo...
http://www.pagestream.org/
http://www.pagestream.org/?action=Downloads

Create multiple single unit wip jobs for total sales order line qty

Hi all,
I want to know if there's a standard way to create multiple single unit wip jobs from a sales order line which has 2 or more units, i mean...
I have a sales order line with item A with 3 units. If I progress the sales order, a single job is automatically created in WIP with 3 units to be created. What i want is to create 3 jobs with one unit each, all of them linked to the sales line order...
Thanks in advance!
Regards!
Answered.........
Edited by: user604737 on Nov 10, 2010 3:51 PM

Hi Sandeep
We have similar requirement (SO qty = 3 then 3 WIP jobs should be created). However when planning releases WIP jobs it does not tie back(reserve) the jobs to sales order.
Are you aware of any standard way to do the same??
Regards
Mudit Gupta

CLAD with MS in Electronics/Electrical engg looking for better opportunities

Priyanka Chaudhary
ob/4 wardens' residence medical boys hostel campus, near white church colony, Indore(M.P)-452001
[email protected]
OBJECTIVE:
==========
Seeking position as Labview Developer
EDUCATION
==========
Master of Science in Electrical Engineering
University of Kentucky, Lexington, KY.( G.P.A. 3.5/4.0)
May 2010
B.E. Electronics and Communications Engineering
Rajiv Gandhi Technical University, India
First Class with Honors G.P.A. 4.0/4.0
June 2007
SKILL SET
==========
Programming Languages: Labview (2011,2010,8.6),Simulink,VHDL, Verilog , C , C++, VC++, MATLAB C#,HTML, ASP.Net 4.0, Assembly Language
Development and Simulation Tools: Labview, Xilinx ISE, ModelSim, MATLAB, MS office Suite, VS .Net
Hardware: NI cRIOs, NI CDAQ, NI C-form thermocouple ,IEPE and strain gauge modules etc.,8085/8086 Processors, 8051/8951 Microcontrollers
WORK EXPERIENCE
===============
1)Assistant Manager, VE Commercial Vehicles Ltd. (OEM), Pithampur, July 2010-Present
-Certified Labview Associate Developer (CLAD) [Serial Number:100-311-4045; Issue date: Dec 29,2011;Expiration date: Dec 28 2013]
-Part of the software development team in the Vehicle Validation and testing Division
-Developed and deployed software in Labview for Testing Rigs required in the Fatigue and Endurance Labs.
-Attended Labview Core1 & Core2 training and preparing for Certified Labview Associate Developer exam (CLAD).
-Projects include:
--software development for Clutch endurance test using Master/Slave architecture;
--system identification, iteration and drive-file generation from RLD for Cabin testing on Moog Controller;
--Test Sequence generation for suspension leaf spring endurance and Front Axle endurance tests;
--R&D of Stewart’s Platform(Multi-Axis Shaker Table) in Simulink using Pro-E/CAD model and validation of the model parameters for Rig development in Labview.
--Single-handedly designed and deployed endurance test application on FPGA target using Labview 2011 using Modbus as communication protocol between variable frequency drives(ABB) and motors.
-Designed software utility manuals for rig operators.
2) IT consultant, Libsys Consultancy, Chicago, USA ,Sep 2010-March 2011
-Worked as Dot net developer apprentice/consultant for client (Thomson Reuters ) in Minnesotta,USA.
-Worked on Models –View-Controllers architecture to design Web applications.
3)Graduate Research Assistant, University of Kentucky, May 2008 - Aug 2010
Thesis : Spheroid detection in 2D images using Circular Hough Transform
-Collaborated with National Cancer Institute and the dept. of Opthalmology to prepare High Content –High Throughput Screening Assay (3D-ECSA) analysis platform.
-Ran an automated test bench with a motorized camera (VC++, MFC) for the assay analysis and image acquisition.
-Synthesized data stochastically similar to original, to increase the databank.
-Developed algorithm (MATLAB) to detect spheroids in data images using Circular Hough Transform.
-Demonstrated measures to classify identified spheroids according to shape and symmetry.
-Involved extensive application of Image Processing techniques.
4)Graduate Assistant, Graduate Housing Resident Manager, University of Kentucky,Feb 2010- May 2010
Responsibilities include, resolution of conflicts, inspections, attending to resident requests and acting as a bridge between the 100+ residents and housing body.
ACADEMIC PROJECTS
==================
1)Design and implementation of 2 special purpose processors,Spring 2008
-Designed two special purpose processors in VHDL in Xilinx ISE
-These were non-programmable and were designed to execute a repetitive custom logic
-Simulation was done in ModelSim and tested on Xilinx Virtex 5.1 FPGA.
2)Wireless Datacommunication between terminals using Frequency hopped spread spectrum,Spring 2007
-Prepared and etched PCBs for circuit base;
-Soldered HT-12 encoders/decoders, transceivers and PLL ICs to the PCBs to form a FHSS transceiver circuit
-Involved electronics and communication principles.
-Demonstrated the working of the units for duplex communication
PUBLICATIONS
=============
Correlation based swarm trackers for 3-dimensional manifold mesh formation
SPIE April 13,2009. Vol:7340 2009
RELEVANT COURSEWORK
===================
Graduate:
Digital Signal Processing, Deterministic systems, Real-time Embedded systems, VHDL, Antenna Design, Solid state electronics,
Electromagnetic field theory.
Undergraduate:
Mobile Communications, Satellite Communications, Fiber Optics, Microwave Circuits, Data Compression and Encryption, Microprocessors and Microcontrollers, Microelectronics, Digital Logic Design, Electronics
Attachments:
Priyanka_Chaudhary_resume_LABVIEW.pdf ‏130 KB

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**

Looking for 2 Product Solutions for eCommerce site created in Muse and published to BC

Seeking suggestions for 2 separate BC eCommerce website product applications: I have within BC so far about 200 image in the in a folder in the "File Manager" -AND- each image has been optimized as a low-res digital image down-load product (divided among 20 catalogs).
#1. Image downloads not for individual purchase but as (a bundle of 6 for one price) and (a bundle of 13 for second price) only.
I'm trying to customize two BC products a 6 Pack & 13 Pack of digital image downloads. Normally in BC, a visitor could purchase a single image as a downloadable product and after successful check-out they would receive an email containing the download links. I need to disable single unit purchases and enable the customer to ONLY select 6 images for one price -or- select 13 images for one price. After successful check-out they would receive links for either 6 download files or 13 based on their purchase. They could also purchase multiple pack sets.
#2. Allow the site visitor to select 12 images (from 200 images among 20 catalogs) for a 12 month custom calendar which would be printed and shipped. The BC product here would be a 12 month custom calendar. I have a product listed in BC as a "12-Month Custom Calender" and a display page titled the same. I have been looking into a drag n drop system that would allow the visitor to: purchase the product > select 12 images > submit their select by email to site admin.
I have limited coding skill and I should mention that I originally created and continue to add-on to the site with Adobe Muse. Because I chose to use Muse, I have been looking for solutions that I can embed in Muse pages as "Objects" as Muse will over-write BC custom elements as it is over-written. I have looked at either using a 12 field drag n drop which might work but I can't determine how to make the 20 catalogs available on the same page to select from.
Can ANYONE offer suggestions?
Thanks

Sorry but in no way will you get that to work using Muse.
You need to custom trigger the core functionality BC fires to add to cart in the system as well as update the visuals etc, and also overcome some of the BC scripting and what that does and function overrides etc. You need a high end front end developer at the least to be able to help you, and not using Muse.

Looking for an application that works like windows photo gallery?

I switched to Mac and love it except for photos.
I basicly upload a batch of photos to a folder named temp, then tag each photo and drag them to their appropriate folders an eventually delete said folder, is there any application that works like this? Minus iPhoto,picasa,lightroom or adobe bridge?

Then I tag or name the person and drag them to albums but the event stats there.
I presume you mean the Event "stays" there.
Like iTunes, iPhoto is a database that works on a Library principle. All items are in the Library, each playlist is a subset of the Library.
So in iPhoto, all Photos are in the Library and each Album is a subset of the Library.
Events are just a view of the Library, broken by the date and time the pics were taken. Don't want to see them? Click on the Photos heading for a view of the Library as a single unit, not broken into Events.
And I have to import the Photis everytime, why cAnt I add photos to pictures directory and iPhoto will see them?
Because you might not want everything in your Pictures Folder in iPhoto.
But seriously: How much more difficult is it to drag the photos to
the iPhoto icon in the Dock
or
the iPhoto Window
or
use the File -> Import command
than to drag the photos to the Pictures Folder?
You might want to have a quick look at the tutorials at
http://www.apple.com/ilife/tutorials/#iphoto
Thye may help you understand the basic concepts.
Regards
TD

DIY'er looking for guidance with 1st major Stereo Install

Ok. So i've just bought this 05 GMC Envoy XUV. It's got the Bose stero with touch screen DVD based navigation. It sucks. Bad. There is no current Navigation DVD. It's a single disc system, so even if i had a new NAV CD I would have to remove it to listen to a CD. It just sucks. So I want to replace it. I'm looking to go with a double din touchscreen unit. I want one that has bluetooth, USB, Aux, CD/MP3 and is XM ready. Something that will work with my Iphone or my wife's Android. Something that is compatible with the Bose system, keeps my Onstar and my steering wheel controls and that won't interfere with the chime and warning systes. My local installer wants almost $800 bucks to put int a $300 unit. Seems a little steep. So, I want to do it myself. I'm a very capable mechanic and electirician but i've not had alot of experience with stero systems. So what i'm looking for is advice on what type of equipment i should be looking at. Maybe brand or model suggestions. Even a handy dandy how to guide would be nice. So. Any experts out there willing to let me bend their ear?

dash kit: 99-2003 $12.99
harness: GMOS-04 $99.99
antenna adapter: 40-gm10 $10.99
Steering wheel control: ASWC $53.99
TOTAL: $180.96
INDASH DVD LABOR: $99.99
STEERING WHEEL CONTROL LABOR: $59.99
TOTAL W/INSTALLATION: $340.94
add in your 300 dollar radio and you are at $640.94 before tax, saving your $160 compared to your local installer.
those are the parts that you are looking at to complete that installation without losing any of your safety chimes for your vehicle. unfortunately since we offer the service here in our stores no-one will be able to give you any information on how to do the installation, or tips/tricks. iour workmanship is covered for the lifetime of the vehicle along with a timely installation taking around 2 hours, and peace of mind knowing that if anything were to go wrong than any best buy in the NATION will be able to assist you. Hope this helps you out, if you have any further questions please do not hesitate to let me know! thanks for the question and welcome to the community!
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Stuck in "Looking for Backup Disk" in Time Machine with Time Capsule

I too am having a "Looking for Backup Disk" message going on forever . . . .
I have the following showing in my log (which is for a backup that started almost 6 hours ago . . .)
Starting automatic backup
Attempting to mount network destination URL: afp://Toni%20Way;AUTH=[email protected]/Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://Toni%20Way;AUTH=[email protected]/Data
Disk image /Volumes/Data/Toni’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
I am not getting successful backups. I first thought it was a problem with the WD hard drive I had so I invested in a Time Capsule thinking maybe it would work better with the Mac (i.e. Apple to Apple). I got a few successful backups when I got the Time Machine on June 12th but none since. I only just noticed that I wasn't having successful backups as there was no notification. I have tried a Full Reset as per these instructions with no success:
http://pondini.org/TM/A4.html
Help!

I've successfully changed the name of the Time Capsule to "Toni TC" but still no success. It is still sticking at Looking for Backup Disk.
Still have a space in the name.. No spaces. No non-alphanumeric.
Not that I think that is your problem.
From the log the actual unit is mounted and you have everything working but not actually able to copy packets across the network.
I have an ethernet cable running from my cable provider's router to the Time Capsule and then an ethernet cable running from the Time Capsule to the iMac.
This is good... also turn off wireless in the computer to force connection by ethernet only.
But when I go into Disk Utility, it isn't listed in the left hand side.
Only the sparsebundle will list and only when it is mounted.. TC is a network drive not a local drive. It will not show up in disk utility.
Let me suggest you erase the TC and start over.. sometimes it is the only way to get things going again.
A4 reset of TM. http://pondini.org/TM/Troubleshooting.html
And do a verify of the local disk.. A5.
I would also like you to test copying a single large file to the TC.. create a new directory in the TC from finder.. and copy a single large file.. 1GB sort of size and get actual speed measurement from Activity Monitor.

Can I swap I my modem and HH3 for 1 unit?

Hi
I was looking into swapping my HH3 and OR modem for a single unit and looking at swapping them both for a Draytek Vigor 2850
http://www.draytek.co.uk/products/vigor2850.html
From my limited knowledge it looks like it "should" work - but can anyone confirm if it does, or not ?
Cheers
Solved!
Go to Solution.

Webby wrote:
Yep, no problems. There's a thread on here already about drayteks
Search result http://community.bt.com/t5/forums/searchpage/tab/message?filter=location&location=Board%3ABTInfinity...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Looking for VI for single unit electrophysiology

Similar Messages

Maybe you are looking for