Looking for VoIP/ phone system solution based on select criteria

1. H.323 & SIP support
2. distributed call platform integrated gateway/ controller
3. STU/ FNBDT relay over IP
4. support for both legacy TDM & VoIP
Is anyone familiar with Network Equipment Technologies, Inc. SHOUTip platform??

Cisco Call Manager will suit for u r needs. Check for Product literature and Overview
http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Software:Cisco_Call_Manager&viewall=true

Similar Messages

Syntax for sum in Smart Form based on Selection criteria in Program.

Hi,
We have created smart form for printing confirmation entries in desired format. We have given some selection criteria in the program. Now, we want to do the sum of certain fields in the smart form based on selection criteria given in program and selection screen.
But we are getting wrong sum in the smart form than expected.
When we debug the program during run time, we are getting correct records as per our expectations. But result of sum in the out put is not as per given selection criteria.
Do we need to establish link between "select option" and "Smart form"? How can we use internal table created for select option in the smart form?
Thanks & regards
Vijay

Hi,
There will be no option to sum the values in smartforms, You just have to sum and append the data to internal table and display the internal table data in the form.
Regards,
Satish

Task Privileges for Existing Users - Looking for a global update solution

After some reading I understand that if you set the task privileges for the PUBLIC user in the Privileges section of Discoverer Administrator (10g), any new user created in the system will pick up the privileges you have assigned to the PUBLIC user.
I currently have 4000+ users who have access to Discoverer Plus and the ability to create/edit queries. I want to limit who can access Discoverer Plus functionality to approximately 150 users.
I have changed my PUBLIC user to NOT have privileges but this will only affect new users. Is there any way to restrict 4000+ users without having to go through each user individually and set the privileges.
I am looking for a global update solution. I am wondering if this can be done through the back-end.

Hi Mezzobella
If you change the rights for the public user then other users, who have not been manually adjusted in any way, will automatically pick up the public rights. Therefore, if you have a lot of users that are not changing this means that at some point in their life you will have clicked OK or Apply on the screen with a user displayed. This now assigns the rights to that user as opposed to inheriting them from the public user.
What you are describing is the perfect reason why you should not administer Discoverer using user accounts but to use roles or responsibilities instead.
In your case you are now somewhat stuck. The programatic way to revoke these rights is to drop rows from the EUL5_ACCESS_PRIVS table but this could take longer than doing inside Discoverer. Basically, when a user has been granted privileges one row per privilege is inserted into this table. The column AP_EU_ID contains the ID of the user. The column GP_APP_ID is the one that tells you what privilege a user has. Here is a list of the privileges:
1000 Desktop / Plus Privilege (U)
1001 Create / Edit Query (U)
1002 Item Drill (U)
1003 Drill Out (U)
1004 Grant Workbook (aka Sharing) (U)
1005 Collect Query Statistics (U)
1006 Admin Privilege (A)
1007 Set Privilege (A)
1008 Create / Edit Business Area (A)
1009 Format Business Area (A)
1010 Create / Edit Summaries (A)
1011 Not used as far as can be determined
1012 Schedule (U)
1013 User is never required to schedule workbooks (U)
1014 Save workbooks to database (U)
1015 Managed scheduled workbooks (A)
1016 This is an apps mode EUL
1017 This is the user's assigned language
1018 User is allowed to change password
1019 to 1023 Not used as far as can be determined
1024 Create Link (U)
Note: A = Admin privilege, U = User privilege
Theoretically you could manually delete rows from this table and that will revoke the rights. In reality, Oracle do not like it when inexperienced users manually the EUL as you could corrupt it. Therefore, any manual updates must be done with utmost caution after making sure you back up or have a copy of the table you will be updating - just in case.
Try running this query to see the content:
SELECT DECODE( AP_EU_ID, 104198, 'Viewer', 103697, 'Plus', 'Other' ) "Who" , AP_ID, AP_TYPE, AP_EU_ID, AP_PRIV_LEVEL, GP_APP_ID, GBA_BA_ID, GD_DOC_ID, AP_ELEMENT_STATE
FROM EUL5_ACCESS_PRIVS
Best wishes
Michael

External Ringer for VOIP Phone

I have external ringers connected to VG224's for VOIP phones in our shops. I have them configured and they work as they should for a while, but after a month or two it appears to blow up the port on the VG it is attached to. I am thinking it might have to do with resistance of the bells, but since I am not an electrician I am not sure. The ringer is a Premier PT-102 bell and per the description is 1000/2650 Ohm. Has anybody experienced problem with external ringers blowing up VG ports. Or is there any alternatives to the analog ringers that is designed to work with the Cisco VOIP phones. Thanks for any info anybody can supply.

I did get one of the Algo 8180 SIP Audio Alerters and it works great as an external ringer. Also since it has the capability of paging, we are trying to get it configured to use with our IPCelerate paging solution. Does anybody have any thoughts or ideas how to accomplish this. I can get it to page using a direct extension to the Algo device, but can not get it to receive pages from IPCelerate. Any help would be appreciated.

Im looking for a phone finder app..like Life360

I don't think I'm using the app store correctly. I go to the blue round circle witht the A on it and try the search feature. I'm looking for a phone or devicing finding app. Ihave one on my Samsung called Life 360 and also put it on an Iphone but don't know why I can't find it on the Macbook.

Basically, press Home and the sleep button simultaneously. The screen blinks, you hear a click, and the screenshot's saved to the camera roll. There's some finesse involved in the button pressing, however. Some people claim you have to press and hold Home first, then tap the sleep button. Just be prepared to experiment. I'm on OS 3.0. Other OS versions may behave differently.

I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

Hi,
I could resolve the issue since there were lot of issues after system copy.
1. During distribued to Cenrtal system - system copy.
You need to combine both DB and CI export copies in one folder during which one thing can happen.
SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
I eliminated this issue also.
After JAVA started I faced an issue with XI related navigations.
ecchangeProfile url still had an entry of Production System. This may be a bug.
After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
Now I can access all the XI related navigations.
I need to also perfrom SGEN and Profiles import.
Do I need to change any additional settings after this so that my production and DR can work without any issue?
Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
Regards,
Rajkumar

Looking for SharePoint Project Management Solution for Office 365 - Risk,Issues,budget

Hi All,
I'm looking for a Project Management solution plugin like PM Central below for office 365 cloud
http://store.bamboosolutions.com/BambooMainWeb/pmc-tryit.aspx
Looking to get more resources and links
Thanks in advance

Hi Patrick,
There are many project management apps for SharePoint Online. Such as Project Management, EPM Pulse for Project Online and so on.
Here is the office store URL , you can choose an appropriate app and add it into your SharePoint Online:
http://office.microsoft.com/en-us/store/results.aspx?qu=project&avg=osu150&vtags=Project%20Management
Best Regards,
Eric
Eric Tao
TechNet Community Support

Looking for a new system working with the adobe creative suite

Hello everybody,
i was 6 years happy with my asus notebook series x55s for what I paid around 1000 €.
I worked until CS5 with it but now it is getting a little slow and I am looking for a new system.
I am considering buying an Imac such as
http://store.apple.com/us/product/FC814LL/A/refurbished-imac-27-inch-31ghz-quad-core-intel -core-i5
but I never bought an apple computer, I am just used to edit on one from work and school
or
buying an Asus Laptop again (f.g. the Asus N56VM)
http://www.cnet.com/laptops/asus-n56vm-ab71-15/4505-3121_7-35544410.html which I found for around 900€
and a screen with 27 inch such as the Samsung Sync Master P2770 (around 250€)
I am mostly editing Full HD material from the Ex1 and DSLR on premiere CS5 and 6.
Since I am not that technically expert I would like to have some opinions/ suggestions of you regarding
my thoughts.
I would like to spent up to 1600 €.
Thank you so much!
Nadja

Laptop Video Editing PC
-http://forums.adobe.com/message/4717373
-http://forums.adobe.com/message/4578948
Also read http://forums.adobe.com/thread/1281294

I am looking for Compact RIO system for PID control

Hi all,
I am looking for the CompactRIO system for PID control.
My system acquires two input data (0-10V) from two displacement sensors and sends one output signal (0-10V) to piezo-actuator at every step. And my target is the short settling time and the low overshoot.
I think that I need fast control system. So I am interested in CompactRIO. But I am not familiar with this sytem. Could you recommend the good control system for me?
The one important thing is that the time limiting step of my system is Piezo actuator (it's natural freq is 20kHz.) CompactRIO is much faster than the Piezo-actuator. I am not sure whether CompactRIO is good to my system or not.
Here is the CompactRIO system which I am interested in:
i) CompactRIO Reconfigurable Embedded System: cRIO-9004
ii) CompactRIO Reconfigurable Chassis: cRIO-9101
iii) I/O Module : AI : cRIO-9215 AO: cRIO-9263
Thank you so much,
Sungjin

Hello Sungjin,
CompactRIO should work great for your PID control system. Those I/O modules are the correct voltage range and the 1M gate FPGA backplane will be plenty for a single PID controller. You'll probably be able to get loop rates around 100kHz for analog PID control.
Keep in mind that the LabVIEW FPGA module includes PID examples that will cut down your development time considerably.
Regards,
Vineet

Looking for the oracle equivalent of T-SQL 'SELECT TOP n'

Hi,
I'm looking for the Oracle equivalent of T-SQL 'SELECT TOP n'
and can't find any. There is SAMPLE(n) function but it supposed
to pick up random values and I'm not sure if it's possible to
make it select top values. Please help 8-)
Thanx

Hi Marina.
Oracle does not have a functionality like SQL Server for TOP
selection. The ROWNUM option should be used with great care and
you may get unreliable results.
Try looking at Metalink
Doc ID: 291065.999
Doc ID: 267329.999
- They discuss this issue, and solutions.

DHCP - Cannot add text option for VOIP phones in OES Linux

While working through this, I solved the issue, but decided to post this anyway as it may help others to find these sorts of errors.
I'm working on migrating from NetWare 6.5sp8 to OES11sp2. Client has Shoretel VOIP phones. Existing NetWare-based DHCP has no problem. Option 156 has been configured to give out the required text information that Shoretel phones require.
Problem is that I could not get the OES11 DHCP to run with that option. Nor could I migrate the existing option over - the Migration Tool (in OES11) says it successfully migrates DHCP, but I cannot start the dhcpd daemon. Error is that it failed, and in the rc.dhcpd.log file I see an error:
LDAP Line 26: unknown option dhcp.Shoretel_Boot.
LDAP Line 26: unexpected end of file
LDAP: cannot parse dhcpService entry 'cn=newdhcpservice,o=LIBRARY'
Configuration file errors encountered -- exiting
If I look in the file (created when LDAP reads DHCP config from eDirectory apparently) dhcp-ldap-startup.log I can see the problem entry at line 26:
option Shoretel_Boot "FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,L AYER default-lease-time 259200 ;
This option does NOT show up in the newdhcpservice option when I look at it in ConsoleOne, or DSBROWSE, or DNS/DHCP Management Console.
This option DOES show up in the DNS/DHCPManagement Console if I look at the DHCP (NetWare) tab and look at Other DHCP Options for some of the configured subnets, but it actually has different text from the above, specifically:
FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,LAYER2 TAGGING=1,VLANID=9
Note that it does not have a " character anywhere in the entry. This option is configured as a Global DHCP text option.
Novell TID 7009464 mentions the issue, though not for Option 156. In that TID there is this:
"Situation #2
Migrate a working DHCP server with DHCP options that are of type "Text" to an OES server.
Load the DHCP server service... it fails to load and gives similar errors to the ones listed above."
Under resolution the TID says to delete and recreate the dhcp service object without the text option and it will load. That doesn't work for me as I still get an LDAP error pointing to the Shoretel_Boot unknown option. (I dare not try deleting it from the NetWare DHCP config and risk breaking the client's phone system).
One of the options in the TID to fix this is to re-enter the data using the DNS/DHCP Management Console - but that didn't work.
Here is the answer:
First, the log files are misleading. The error message points to not being able to read the newdhcpservice object entry - but the problem was elsewhere. In fact the problem showed up in the logs even when there were no option 156 entries at all in any object inside the newdhcpservice or the newdhcpservice object itself. The problem existed in the NetWare configuration of the object for one of the dhcp subnets.
Specifically, there was an illegal character in the text entry for option 156 - the # character was in there, like this:
FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,LAYER# 2TAGGING=1,VLANID=9
If you look at the error log entry for syntax error you can see that the option 156 text stopped at the # symbol, and then default-lease-time was appended to the end.
Removing the # symbol got things working.
Craig Johnson
(former Novell partner / sysop)

On 30/08/2014 21:16, phxazcraig wrote:
> While working through this, I solved the issue, but decided to post this
> anyway as it may help others to find these sorts of errors.
>
> I'm working on migrating from NetWare 6.5sp8 to OES11sp2. Client has
> Shoretel VOIP phones. Existing NetWare-based DHCP has no problem.
> Option 156 has been configured to give out the required text information
> that Shoretel phones require.
>
> Problem is that I could not get the OES11 DHCP to run with that option.
> Nor could I migrate the existing option over - the Migration Tool (in
> OES11) says it successfully migrates DHCP, but I cannot start the dhcpd
> daemon. Error is that it failed, and in the rc.dhcpd.log file I see
> an error:
>
> LDAP Line 26: unknown option dhcp.Shoretel_Boot.
> LDAP Line 26: unexpected end of file
> LDAP: cannot parse dhcpService entry 'cn=newdhcpservice,o=LIBRARY'
> Configuration file errors encountered -- exiting
>
>
> If I look in the file (created when LDAP reads DHCP config from
> eDirectory apparently) dhcp-ldap-startup.log I can see the problem entry
> at line 26:
>
> option Shoretel_Boot
> "FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,L AYER default-lease-time
> 259200 ;
>
>
> This option does NOT show up in the newdhcpservice option when I look at
> it in ConsoleOne, or DSBROWSE, or DNS/DHCP Management Console.
>
> This option DOES show up in the DNS/DHCPManagement Console if I look at
> the DHCP (NetWare) tab and look at Other DHCP Options for some of the
> configured subnets, but it actually has different text from the above,
> specifically:
>
> FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,LAYER2 TAGGING=1,VLANID=9
>
> Note that it does not have a " character anywhere in the entry. This
> option is configured as a Global DHCP text option.
>
> Novell TID 7009464 mentions the issue, though not for Option 156. In
> that TID there is this:
> "Situation #2
> Migrate a working DHCP server with DHCP options that are of type
> "Text" to an OES server.
> Load the DHCP server service... it fails to load and gives similar
> errors to the ones listed above."
>
> Under resolution the TID says to delete and recreate the dhcp service
> object without the text option and it will load. That doesn't work for
> me as I still get an LDAP error pointing to the Shoretel_Boot unknown
> option. (I dare not try deleting it from the NetWare DHCP config and
> risk breaking the client's phone system).
>
> One of the options in the TID to fix this is to re-enter the data using
> the DNS/DHCP Management Console - but that didn't work.
>
> Here is the answer:
> First, the log files are misleading. The error message points to not
> being able to read the newdhcpservice object entry - but the problem was
> elsewhere. In fact the problem showed up in the logs even when there
> were no option 156 entries at all in any object inside the
> newdhcpservice or the newdhcpservice object itself. The problem
> existed in the NetWare configuration of the object for one of the dhcp
> subnets.
>
> Specifically, there was an illegal character in the text entry for
> option 156 - the # character was in there, like this:
>
> FTPSERVERS=172.30.43.8,COUNTRY=1,LANGUAGE=1,LAYER# 2TAGGING=1,VLANID=9
>
> If you look at the error log entry for syntax error you can see that the
> option 156 text stopped at the # symbol, and then default-lease-time was
> appended to the end.
>
> Removing the # symbol got things working.
>
> Craig Johnson
> (former Novell partner / sysop)
Thanks for taking the time to post the above as I'm sure it will help
someone else in the future.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

Looking for a helpdesk system...

I'm looking for a web-based (preferably PHP) helpdesk system that can authenticate with Open Directory. Basically what I want is a means of tracking support cases based on user information. Something that can send out mass emails to users is ideal.
I've tried a few that have LDAP support (i.e. oneorzero), but it seems that Open Directory is just different enough from LDAPv3 that they don't work.
Can someone point me in the direction of such a system that can talk to Open Directory?
Thanks.

We have had this problem forever...
We even bought webhelpdesk (and would be happy to resell our license, if someone made that legal, for a huge discount) for this reason...
Ultimately, we used a two-pronged solution:
Drupal ( http://drupal.org ) CMS based on PHP, lots of modules for lots of capabilities. Mostly, we need a sort of blog + knowledgebase + survey tool + helpdesk for IT. It has almost all that (we didn't like the helpdesk, but it's a work in progress)... But, since it has LDAP logins and persistent users, we could add:
CerberusHelpdesk ( http://cerberusweb.com ) a PHP helpdesk (not free, but like... $300?). Cerberus is an email queue management system (no asset tracking, alas), but it's great for issue resolution! And, since it's based on email, we were able to create a helpdesk ticket submit form in Drupal that would email the ticket into Cerberus.
It sounds complicated, and it's definitely not the easiest* thing in the world, but it is simple, and functional for the helpdesk solution. I should also mention that Cerberus has* a submission/ticket viewing "customer" web addon that CAN use LDAP authentication - but we toyed with it, couldn't get it working, and gave up (we care more about the helpdesk team agents being LDAP-auth'd, but it can't do that yet, and wasn't a dealbreaker).
I'd also HIGHLY recommend an email based system that polls from a standard email account - that way, if your webserver dies, you can just reconfigure Mail/Thunderbird/whatever to directly access that account, and continue to serve your customers!
Good luck!

Looking for an Audio Server Solution

Alright, so I've got a headless server running in my bedroom that I use for storage. I already stream media to my ps3 using ps3mediaserver, but what I'd really like to be able to do is play music remotely from my desktop and laptop. I've spent some time looking around for solutions, but can't really come up with anything. As such, I'm looking for some help!
What I'd like to do:
* Keep all music stored on the server
* Access the music remotely in a nice gui interface (Rhythmbox would be ideal, but something similar would work too)
* Play the music out of my desktop or laptop's speakers, not out of the server
I played around with mpd some, but ultimately gave up. I could get it to stream with http, but I was having to stream it to vlc and control it with another program... Not the best solution.
Any ideas? All help is greatly appreciated

tomk wrote:
gabe.benson wrote:I'm attempting NFS, but I have no rpcbind.service file on my system. rpcbind is installed, but when I attempt to start the services with systemctl it tells me that rpcbind.service doesn't exist.
Are you sure your system is up to date? systemd support was added to the rpcbind package in April this year,
Oddly enough it's working now. No clue what changed.
As for MPD, I've pretty much given up. Thanks for the suggestions and help!

Can I leverage Skype Lync O365 integration for full phone system?

Have O365 enterprise and need new phone system for startup. Can I leverage Skype for voice account and leverage Lync/ exchange features together?
we are want no on premise environment.
can I do this without Lync server? if not, does Lync server exists as a subscription?
Layman's terms please.
thanks in advance!

The equipment needed is at minimum a Lync server (if you use a SIP trunk from an ITSP) otherwise you will also need a voice gateway. The license comes as part of an E4 subscription.
http://office.microsoft.com/en-us/business/office-365-enterprise-e4-business-software-FX104034562.aspx
Without knowing the requirements and scoping it out properly, based on you saying that it's a home office environment I'd be more inclined to use the ITSP.
If you scroll to the very bottom of the page I've linked to - you will see this: "Lync enterprise voice capabilities require a customer
to purchase and deploy Lync Server, either on-premises or in a hosted data-center, to enhance or replace traditional PBX systems"
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)

Looking for good firewall/router solution

Hi.
Im setting up a network and im wondering wich type of device i should use. The question is if i should use a firewall and a layer 3 switch for inter VLAN routing or if i should use a router solution with built-in firewall (like zone-based) and just layer 2 switches.
Demands on the equipment:
NAT
Some QoS (dont really know on what level of complexity its going to demand, proberbly very low, just some form of QoS)
Firewall solution
Cost balancing or something between two Internet connections. So that traffic running on one can jump over i case of connection failing.
4 gigabit interfaces (RJ45 should work but if i can get better for reasonable price im going with it).
Hoping to get som input on this matter.
Regards Tommy Svensson

Tommy,
An ideal solution for what your looking for would be either the rv120, wrvs4400n, or Sa500 series router and possibly an SG300 series switch in layer 2 mode. This will allow the router to cover the vlan setup and intervlan routing if need be. The switch will allow you to configure qos and you can trust the qos coming into the router on the lan side.
The other option you could get gigibit router and put the sg300 series switch in layer 3 mode and let it handle the vlans and qos at that point. The only thing about this setup, any router that is gigibit we have will be able to facilitate vlans and inter-vlan routing.
Hope this gave you some ideas as to designing the network.

Looking for VoIP/ phone system solution based on select criteria

Similar Messages

Maybe you are looking for