Looking for VR705 Service Manual

Hello,
I was hoping that maybe the service manual for this model is available (VR705, MS-171F). Any info is apprecipated, Thank you

https://forum-en.msi.com/moderator/assembly-guides/ms-171f-disassemble-sop.pdf
https://forum-en.msi.com/moderator/assembly-guides/assemble-171f.pdf

Similar Messages

Looking for standard service of Incoming Payments(F-28)

Hi, experts.
I made customer invoice using standard service which should be cleared by another operation.
I'm looking for any service that do things like F-28, Incoming Payments.
Thanks for your precise time.

You can consider using EDI (FINSTA) for automatic loading and processing of the bank statements.
Thanks
Ashok

Looking for CS5 PDF Manuals

Well the last time I visited this forum was when I was looking for the CS4 manuals. I wonder why Adobe stopped putting the manuals on the disk set. But I don't care where they put them as long as they can be found. Can someone point me in the right direction? Thanks.

Thanks Stix.
It's kind of annoying that Adobe doesn't put the manuals on the disk set anymore. Oh well. And then there was that long forgotten time when we used to actually get a print version of the manual.

Looking for Cisco service providers outside of USA

I am looking for Cisco service providers in Guyana.
It can be a third party vendor for Cisco partner for Cisco infrastructure maintenance.
Thanks,
Sam

Hello, xszhuMerak1.
I can help you find local Cisco support on your area. Would you be able to tell me for what Cisco infrastructure this support will be? Let me know if you have additional concerns or e-mail ([email protected]) me directly. Kind regards.

Looking for a reference manual that actually describes in detail all attributes for a command

I am using CS5. I am teaching myself Photoshop using their book, "Classroom in a book".
Thought the lessons, they will suggest specific setting for command attributes without describing exacting what these values mean.. For example, on page 88 they give the student specific settings for the Refine Edge dialog bog under the Quick Selection tool. They say, "To prepare the edge for a drop shadow, set Smooth to 24, Feather to 0.5, Contrast to 12, and Shift Edge to -21". Note: I am calling things like Smooth, Feather, Contrast, etc command attributes.
My question is not about this specific example, but all these attribute values for all the commands. For example, what does Shift Edge really do when negative or positive. My question is: does a reference, either a book, pdf, or a non-Adobe product (probably a book) exist that actually explains when each attribute actually does for every command? Basically looking for a boring detailed reference guide so when I am using a specific command, I can read about the attributes for the specific command and understand what the values really mean and not guess my trial and error.
Thanks in Advance,
LouF

Lou Fuchs wrote:
For example, I just happen to have my book open to page 113 and it is showing me (at the bottom of the page) the dialog box for Layer Style. I was hoping for a reference manual that explains every option in the that dialog box in detail and tells you what each option means and how it effects the image.
I hope this clarifies what I am looking for.
Here's a little snippet from the info about Layer Styles in the Adobe manual.
Layer style options
To the top
Altitude For the Bevel and Emboss effect, sets the height of the light source. A setting of 0 is equivalent to ground level, 90 is directly above the layer. Angle Determines the lighting angle at which the effect is applied to the layer. You can drag in the document window to adjust the angle of a Drop Shadow, Inner Shadow, or Satin effect.
Anti-alias Blends the edge pixels of a contour or gloss contour. This option is most useful on small shadows with complicated contours. Blend Mode Determines how the layer style blends with the underlying layers, which may or may not include the active layer. For example, an inner shadow blends with the active layer because the effect is drawn on top of that layer, but a drop shadow blends only with the layers beneath the active layer. In most cases, the default mode for each effect produces the best results. See Blending modes. Choke Shrinks the boundaries of the matte of an Inner Shadow or Inner Glow prior to blurring. Color Specifies the color of a shadow, glow, or highlight. You can click the color box and choose a color. Contour With solid-color glows, Contour allows you to create rings of transparency. With gradient-filled glows, Contour allows you to create variations in the repetition of the gradient color and opacity. In beveling and embossing, Contour allows you to sculpt the ridges, valleys, and bumps that are shaded in the embossing process. With shadows, Contour allows you to specify the fade. For more information, see Modify layer effects with contours. Distance Specifies the offset distance for a shadow or satin effect. You can drag in the document window to adjust the offset distance. Depth Specifies the depth of a bevel. It also specifies the depth of a pattern. Use Global Light This setting allows you to set one “master” lighting angle that is then available in all the layer effects that use shading: Drop Shadow, Inner Shadow, and Bevel and Emboss. In any of these effects, if Use Global Light is selected and you set a lighting angle, that angle becomes the global lighting angle. Any other effect that has Use Global Light selected automatically inherits the same angle setting. If Use Global Light is deselected, the lighting angle you set is “local” and applies only to that effect. You can also set the global lighting angle by choosing Layer Style > Global Light. Gloss Contour Creates a glossy, metallic appearance. Gloss Contour is applied after shading a bevel or emboss. Gradient Specifies the gradient of a layer effect. Click the gradient to display the Gradient Editor, or click the inverted arrow and choose a gradient from the pop-up panel. You can edit a gradient or create a new gradient using the Gradient Editor. You can edit the color or opacity in the Gradient Overlay panel the same way you edit them in the Gradient Editor. For some effects, you can specify additional gradient options. Reverse flips the orientation of the gradient, Align With Layer uses the bounding box of the layer to calculate the gradient fill, and Scale scales the application of the gradient. You can also move the center of the gradient by clicking and dragging in the image window. Style specifies the shape of the gradient. Highlight or Shadow Mode Specifies the blending mode of a bevel or emboss highlight or shadow. Jitter Varies the application of a gradient’s color and opacity. Layer Knocks Out Drop Shadow Controls the drop shadow’s visibility in a semitransparent layer. Noise Specifies the number of random elements in the opacity of a glow or shadow. Enter a value or drag the slider. Opacity Sets the opacity of the layer effect. Enter a value or drag the slider. Pattern Specifies the pattern of a layer effect. Click the pop-up panel and choose a pattern. Click the New Preset button to create a new preset pattern based on the current settings. Click Snap To Origin to make the origin of the pattern the same as the origin of the document (when Link With Layer is selected), or to place the origin at the upper-left corner of the layer (if Link With Layer is deselected). Select Link With Layer if you want the pattern to move along with the layer as the layer moves. Drag the Scale slider or enter a value to specify the size of the pattern. Drag a pattern to position it in the layer; reset the position by using the Snap To Origin button. The Pattern option is not available if no patterns are loaded. Position Specifies the position of a stroke effect as Outside, Inside, or Center. Range Controls which portion or range of the glow is targeted for the contour. Size Specifies the radius and size of blur or the size of the shadow. Soften Blurs the results of shading to reduce unwanted artifacts. Source Specifies the source for an inner glow. Choose Center to apply a glow that emanates from the center of the layer’s content, or Edge toapply a glow that emanates from the inside edges of the layer’s content. Spread Expands the boundaries of the matte prior to blurring.
Style Specifies the style of a bevel: Inner Bevel creates a bevel on the inside edges of the layer contents; Outer Bevel creates a bevel on the outside edges of the layer contents; Emboss simulates the effect of embossing the layer contents against the underlying layers; Pillow Emboss simulates the effect of stamping the edges of the layer contents into the underlying layers; and Stroke Emboss confines embossing to the boundaries of a stroke effect applied to the layer. (The Stroke Emboss effect is not visible if no stroke is applied to the layer.)
Technique Smooth, Chisel Hard, and Chisel Soft are available for bevel and emboss effects; Softer and Precise apply to Inner Glow and Outer Glow effects.
Smooth Blurs the edges of a matte slightly and is useful for all types of mattes, whether their edges are soft or hard. It does not preserve detailed features at larger sizes. Chisel Hard Uses a distance measurement technique and is primarily useful on hard-edged mattes from anti-aliased shapes such as type. It preserves detailed features better than the Smooth technique.
Chisel Soft Uses a modified distance measurement technique and, although not as accurate as Chisel Hard, is more useful on a larger range of mattes. It preserves features better than the Smooth technique. Softer Applies a blur and is useful on all types of mattes, whether their edges are soft or hard. At larger sizes, Softer does not preserve detailed features.
Precise Uses a distance measurement technique to create a glow and is primarily useful on hard-edged mattes from anti-aliased shapes
such as type. It preserves features better than the Softer technique. Texture Applies a texture. Use Scale to scale the size of the texture. Select Link With Layer if you want the texture to move along with the layer as the layer moves. Invert inverts the texture. Depth varies the degree and direction (up/down) to which the texturing is applied. Snap To Origin makes the origin of the pattern the same as the origin of the document (if Link With Layer is deselected) or places the origin in the upper-left corner of the layer (if Link With Layer is selected). Drag the texture to position it in the layer.

Looking for Java Reference Manual, Not User Manual

I'm a mainframe programmer learning Java. I'm going thru "The Complete Reference Java" by Schildt. In the mainframe world, manuals are usually broken into reference manuals (shows just the syntax) and user manuals (shows how to do things). I'm looking for a pure Java reference manual that strips away all of the verbose explanation of how to do things and just lists in an organized way the pure syntax of Java. Does anyone know of such a manual? Everything I've found so far falls more into the user manual category that perhaps contains the syntax somewhere (if you look for it), but is overburdened with tons of explanations. Thanks.

Thanks. What you provided is a bit like a reference manual and user manual combined into one. It has the complete syntax along with plenty of explanations. BTW, I think I know where Schildt got most of his material for his Complete Java Reference book. It's almost like he took the Java Language Specification book and reorganized it into a tutorial format.

OT:Looking for a service that will take donations for a non-profit

I am looking for a type of service that will take credit card information and allow donation to a non-profit (library in this case). I am not sure anyone here might now of this service, but the local director of the library has asked about this service.
Thanks,
Jim

Assuming the non-profit already has received 501(c)(3) tax status, start with their merchant bank account. Authorize.net, PayPal and other payment gateways can all process credit cards for non-profits. The benefit of having your own merchant account is that your nonprofit will be the party named on the donor's credit card statements, and funds will flow directly to your nonprofit's bank account.
If you want 3rd party service that specializes in non-profit solutions, look at Blackbaud.com
Nancy O.

Newbie looking for E-MU Manual

Have 200+ DAT tapes that I would like to archive to computer (internal or external) storage but recognize this would need to be via USB. Have capability to burn CD-Rs which could then be ripped to storage but this would be a huge task with wasted steps. Have two DAT machines, one with Toslink and the other with XLR/RCA digital ouputs.
It was suggested that E-MU 0404 could accept the available digital inputs and provide USB output to PC.
Trying to understand the details of the process since I am new to this. So, have a few questions...
1) Will the 0404 be a suitable interface?
2) Given its price, are there less expensive options that will do what I want since this may be a one-time transcription?
3) Saw a (much) earlier request for a 0404 Manual which was never answered and did not see one offered on the Support/Downloads location on the Creative website.
Thanks in advance for assistance.

Really? I've repeatedly used forms and email to contact E-Mu support since Jan 2015, and have received not even an acknowledgement from Support, except for an email the first time, when I'd used the European form. It said the same thing as the stickie thread you cite. No follow-up came in two days or two months.

Looking for text services that work in Mavericks

Quite some time ago several sources offered some nice services that, once installed into OSX, one could quickly alter highlighted text to do things like make the text case "sentence case" or "remove caps" etc. After searching for these services today, I'm coming up with a lot of broken links and no solutions. Anyone out there still have access to these handy services?
Mark

The fee word service should do the trick.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

Looking for Web Services Toolkits

I'm completely new to Web Services and I need to build client applications for some existing web services and I have some questions:
1) I have heard that things called "toolkits" are what I need to create and run client applications for web services. Is this correct?
2) Can anyone tell me some of the more common and reliable toolkits?
Thanks.

EasyWebservice at http://www.acelet.com/super/SuperWebservice/index.html
You can get all available services from WSDL and invoke them by clicking on Swing windows. You can export them and schedule the task using SuperScheduler at http://www.acelet.com/super/SuperScheduler/index.html or SuperWatchdog at http://www.acelet.com/super/SuperWatchdog/index.html.
The standard perpetual license is free.

Where to Look for the Service Interface in the Start Step?

hi @,
I have defined a Service interface in the start step, now I want to use the same in my Web Dynpro Application to pass data and start the BPM . Where can I look at the interface generated and BPM deployed I ddn't use any WSDL but created the same using the SI tool help in BPM.
DO I have to do any other setting and or publishing the same in Registry etc.
REgards,
Amit

Hi There,
>Where can I look at the interface generated and BPM deployed I ddn't use any WSDL but created the same using the SI tool help in BPM.
>
>DO I have to do any other setting and or publishing the same in Registry etc.
everytime i looked up the location of an deployed WSDL i used the "Single Service Administration" in the NWA. In that tool you can search for the name of the WSDL-Interface which you connected to the startevent of your bpm-process. In a option downside the Single Service Administration you can open the WSDL which opo ups in a new browser. Copy that URL from the opened window and cut somthing like &=ws_policy at the end of the URL.
You can start a Process with this URL if you send a propper SOAP-Message to it. You don't need to publish the Service in the Service Registry to use it.
Hope this Helps
With kind regards
Markus

Looking for exchange service

I currently have my iPhone configured with a mobile me Account which I have been pleased with for the Most part. The mobile me syncs with the iPhone and a local outlook client on my ms windows desktop. Calendar contacts and mail all work correctly. I am sure you are wondering why I want to switch....let me explain.
I own my own domain (mydomain.com) all of my mail from here is fwd to my mobile me account. The issue is that my mail provider auto enables a spam filter if u fwd email I don't want this because I obviously have to check my webmail for misplaced spam. In addition to the spam issue I had rather not use the mobile me address at all as I do not feel that it is proff as myeomain.com
So here is my thought if I can find a online exchage service to host my email from my domain that will support an iPhone sync I van do away with mobile me and just use my domain email addy.
Now my question. Does anyone currently use a service like this and what are you experiences. Who do you have this service with. Thanks for your help.

intermedia.net
I use the exchange 2007 server with 122 users.
31 Active sync users.
8 Blackberry users.
2 good moble users.
I love it.
Very easy. never have issues.
Been a customer for 3 years.
5 Star service
My domian is "dwl-usa.com"

Looking for Workflow Service URL in RAR Configuration

We are configuring RAR and are at Workflow step.
Workflow contains four sections:
1. Risk maintenance
2. Mitigation Control Maitenance
3. Mitigation
4. Workflow Service URL.
We are stuck at the fourth step, Workflow Service URL (This Web service URL is used to submit workflow requests to Compliant User Provisioning) and are not able to trace the URL in configuration guide.
Can anyone help me in providing the link for the URL
Regards-
Shubhi

Hi,
It's correct that the WS is the same for both 5.2 and 5.3.
You can get the URL by opening http://host:port/wsnavigator.
Expand AEWFRequestSubmissionService_5_2 and click on document.
//Vit

Looking for iweb '08 manual to print

I printed an earlier version of the manual ('06?) and cannot locate one for iweb '08. Is there one, or do i have to endure watching "tutorials?" Thanks for any help. Also, is iLife '09 a noticable improvement for iweb & iphoto??

There's a getting started PDF that's available but it's not up to date for iWeb 09. The only other manual that might be available would be one in the "Missing Manual" series that usually can be found at Amazon.com.
OT

I have looked at the service manual to be able to access the App store and Itunes, to no avail, still not successful.

I have viewed the download sevice manual to be able to acess itunes and the apps store,and applied all settings which are recommended, to no avil my iphone still prompts me to " Cannot connect to iTunes Store or Apps store, does anyone have any step by step instructions for me. I have attempted may times to resolve this issue with no success. Any advice would be appreciated,
Tq1

Hello everyone,
This is Tq1, when I first joined this community I received enormous responses for my requests, now after seeing there were 11 views and no remarks posted I am wondering where has all the love gone? Just a joke don't take it personally, for those of you who have replied to past questions on this post I am extremely grateful. I hope you all have a wonderful and great day.
Tq1

Looking for VR705 Service Manual

Similar Messages

Maybe you are looking for