Looking for windows 7 drivers for an HP Pavilion 15-p151nr

Hi all:
Got a customer who wants to downgrade to Win 7/64 on a HP Pavilion 15-p151nr. Found Network, audio and video drivers. Still need chipset (HP 227E motherboard?) , USB, SM Bus, and card reader drivers. HP supports only 8 and 8.1 on this model.
Any help?
This question was solved.
View Solution.

Hi:
You should be able to use all of the W7 x64 drivers and software (except the BIOS and firmware files) from the 15t-p000.
http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-pavilion-15-p000-notebook-pc-series/6936226/m...

Similar Messages

Installing windows 7 drivers on the notebook pavilion g6-2400ca

Hi,
i just installed windows 7 instead of windows 8 on my notebook pavilion g6 2400ca, and i'm missing some drivers.
Here are the needed drivers, can you help please?
Bluetooth controller:
PCI\VEN_1814&DEV_3298&REV_00
PCI\VEN_1814&DEV_3298
PCI\VEN_1814&CC_0D1100
PCI\VEN_1814&CC_0D11
PCI\VEN_1814
PCI\CC_0D1100
PCI\CC_0D11
Network controller :
PCI\VEN_1814&DEV_3290&REV_00
PCI\VEN_1814&DEV_3290
PCI\VEN_1814&CC_028000
PCI\VEN_1814&CC_0280
PCI\VEN_1814
PCI\CC_028000
PCI\CC_0280
Ethernet controller:<
PCI\VEN_10EC&DEV_8136&REV_05
PCI\VEN_10EC&DEV_8136
PCI\VEN_10EC&CC_020000
PCI\VEN_10EC&CC_0200
PCI\VEN_10EC
PCI\CC_020000
PCI\CC_0200
Unknown device:
ACPI\HPQ0004
*HPQ0004
PCI device:
PCI\VEN_10EC&DEV_5229&REV_01
PCI\VEN_10EC&DEV_5229
PCI\VEN_10EC&CC_FF0000
PCI\VEN_10EC&CC_FF00
PCI\VEN_10EC
PCI\CC_FF0000
PCI\CC_FF00
WD SES Device USB Controller:
USBSTOR\Other
USBSTOR\RAW
This question was solved.
View Solution.

Great !
Many thanks !!!

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

I'm looking for the drivers to dual boot OS X 10.8.1 and Windows 7.

Hey everyone, I'm looking for the drivers that are needed once you install windows. I've got to dual boot due to school. But, I don't ever remember getting a CD or anything with my mac and was hopping I could download them and burn them to a DVD

No, you don't need to install a software update for Lion if you are now running Mountain Lion.

Help! Windows looking for iPod drivers

Hello
I have just purchased 5th generation iPod (30g + video) and installed a brand new version of iTunes and Updater.
When I Inserted the USB connector Windows Informed me of new hardware and asked for its drivers I looked for a driver on the iPod CD but windows found none, and so I left it to look for automatic driver from windows, but it found no proper drive, I went to the device manager, iPod was listed under unknown device I uninstalled the device and iTunes etc.. and tried it all again with the same results, I ran windows update searched for viruses and spy\ad ware Nothing helped windows just does not recognized my iPod.
Can anyone help?!
Oh, also I had an iPod Mini (4G) that worked fine with my PC (Until it melted on the room heater thanks to my loving wife).
thanks Evie.

hi eyalev!
the techniques in this MarkJones post might be helpful:
http://discussions.apple.com/thread.jspa?messageID=2004249&#2004249
love, b

Looking for users of HP Envy 17-3270nr, Windows 8.1

My PC has a problem that cannot control the screen brightness after upgrading the OS to Windows 8.1, the brightness is always at maximum level. I have been searching around on the internet for months, trying many ways/ tricks posted there but without success.
Now I am looking for those who use the same laptop model, same operating system but without having that problem. I would like to have the information of display drivers on your PC so I can search and try installing them. Thanks.

Hello @q_hung,
I understand that you are not able to control the brightness after upgrading to Windows 8.1, and I would be happy to assist you in this matter!
To restore the brightness on your notebook's screen, I recommend following the steps in this document on Troubleshooting display brightness (Windows 8, Windows 7 and Windows Vista).
If the issue continues, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Windows Vista Drivers for 1820 and 1616 - Lets have some drivers ple

RePost from http://www.productionforums.com/view...?p=47643#47643<img alt="" src="http://www.productionforums.com/images/icons/icon8.gif[/img]?Lets have some drivers please
<span class="postdetails">Windows Vista Drivers for 820 and 66
I hate to say this about E-MU but the way they are dealing with Vista Drivers is unprofessional. I am a repeat customer of Creative products and was so impressed by my old Platinum eX that I bought a second to run duals for tons of audio processing. That was back in the day. Then I jumpped ship and tried out an M-Audio Firewire 40. That did not last too long beforei was completely unimpressed. So I came back to Creative... Purchased a 820 in the box. So impressed I turned around and purchased a 66 in the box just 8 months later. Both ran smooth as butter... All until i just recently built my new system designed primarily with audio production in mind.
With a setup like this, who needs a mac?
AMD Athlon X2 x64 Dual Core +6000 3.0 Ghz
2 Gigs Corsair
Samsung SyncMaster 206BW 2" Wide Screen
EVGA NVidia 9700s 256 DDR3 Graphics
SATAs up the yin
and a PCIMIA to PCI Dock
All under Vista Ultimate OEM
And Guess what?
Months into RTM of Vista...
E-MU is caught pushing release dates.
Last month it said they would release beta drivers middle of April...
I waited, patiently I might add.
I waited<waited some more, I try running xp drivers... computer wont even try to install them properly.
My software waits, computer waits, turns into a gameing machine just because my all together 600 dollar investments in Creative are not important enough to leld me the drivers i need to be producti've in what i love.
I need x64 drivers stat. I need them working, I need them installable without a glitch, a hitch, no driver signing problems, no questions, no fuss no muss. I find it ironic that you guys at E-MU are willing to jump right in there and make sure to have drivers compatable for you new products, yet faithful advocats of the most powerful soundcards you have are sitting here dead in the water because you dont find it nessesary to place priority on ready and waiting end users who have purchased long term support buy investing large amounts of moola into hardware from your company.
Come on, its not like the 820 or the 66 are exactly legacy technology. We are talking about Hardware that is only two years old and should be usable for up to 6 years. This is deffinatly a strike against the company and just goes to show where Creative stands.
I have stood by waiting in silence for a very long time.
Now i think my time has come to tell how i feel and i believe there are alot of others out there that feel the same. the only items that do not work soothly are my E-MUs... go figure.
And I have been looking forward to all i can do running both of them side by side.
Oh yes, and that link posted above to the beta news for vista... its a joke. open up your betas, and have a real dev tell us what the hang ups are... At least give us real concreate reasons why it is taking so long.
with that said, when you guys get yoru act together and get me some drivers, I will sit happy as a lark.
My thoughts for today.
~Alpha-Beta ReaKKtor

Hello Silas,
sorry for my bad english
I already checked that page. On the first time I was trying to install Vista on a clean hard drive. The installation process finishes without errors but after installation Vista shows me a lot of error messages, mostly about unknown hardware. So I installed all available drivers I have found on Toshiba web site. It not helped me too much, hardware problems still remains. I could not find out what exactly causes probles. Finally I decide to install XP and then upgrade to Vista. Now everything seems to be ok. :D
There was some hardware problems but much easier to resolve. It seems to me that Toshiba did not provide all the drivers, for example StarForce Protection drivers. Vista did not recognized this hardware on the first time.
Now it works!

Looking for all Vista drivers to Satellite A305-S6872

Hi i reinstalled Windows Vista retail
and i don't have devices configured
i'm looking for video, sound, ethernet, wireless,
My laptop:
Satellite A305-S6872
PSAG8U-02E018
thanks in advance !

Hi
The Satellite A305-S6872 seems to be a Toshiba US notebook and therefore you should take a look on the Toshiba US driver page:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
There you should find your notebook model and the drivers.
Cheers

Looking for QUALCOMM un2420 windows 8 driver.

looking for QUALCOMM un2420 windows 8 driver. I try to install the windows7 driver but can`t ......
PLEASE HELP ME

go to action centre
trouble shoot
and follow the instructions
fix the probem
i got my mising drivers like that just try it best of luck
<<---------***Click on “Kudos” STAR to say thanks!*** if i helped you to solve your problem

HT204135 what do you do if apple responds that the driver is unavailable. The problem is even if you have manually uploaded the drivers from the epson website, apple seems to need to look for them and if it doesn't work then you are stuck

I am trying to install an epson bx635fwd.
Connecting to the printer is fine and using the usb cable and network seems to work OK. The problem comes when I try and find the printer.
It pops up as a nearby printer but apple tries to look for the softwars on its own website. It then tells me this is unavailable.
I go to the epson website and upload the latest drivers.
When I try again, in system preferences, the same thing happens and I get a message that the software is unavailable from the apple website....etc..etc.
I am using 10.7 on a 24 inch imac, fully updated.
help please

When you select to add the printer, don't select the entry shown under Nearby Printers. Instead, select Add Printer or Scanner and from the new window that appears, select the Epson. If the Print Using menu does not change to the already installed driver and the search window appears, sometimes you have the option to skip this search and manually add the printer via the Print Using menu. If you are not given this option then trash the contents of the Epson folder in HD > Library > Printers. Then unplug the printers USB cable and reconnect. This should prompt the Mac to add the printer automatically and go looking for the driver which is available from Apple.

Vista looking for drivers and BSODs

I bought a 3TB MyCloud device a few months ago. I cannot get it to work properly with my Windows Vista desktop and support refused to help. They remoted in and accessed the device without using their software and claimed it was a Windows problem, not theirs. When I connect the device directly to my Ubee Wireless Router/Switch, Windows Vista immediately sees it as new hardware and tries to find drivers for it. Of course WD does not provide these. In Device Manager, it shows up under Other Devices with a warning indicator because there are no drivers installed. I was able to copy files to the device, but when I try to access them from the device, my Windows Vista desktop gets a BSOD (this happened after the call to support). I've now disconnected the device from my network as the constant BSODs damaged my computer. The device works with my Windows 8.1 computer, but has problems with my Sony Blu-Ray player connected wirelessly to the network. I've posted about this in a different thread. Is there a way to get this working properly with Windows Vista?

Bennor wrote:
The BSOD that other thread talks about appears to be related to using one of the WD apps, my guess is the WD My Cloud Desktop app on their Windows PC. There is a known issue for some who use the WD My Cloud Desktop app where once that app is opened, some users experience Windows Explorer crashing. There is one or two other threads covering this very specific Windows Explorer crashing issue related to that WD My Cloud Desktop app that affects a few users. Generally one does not need to install "drivers" to access the WD My Cloud. One should be able to access the WD My Cloud on their local network via Windows Explorer (NOT Internet Explorer). It will show up in the "Network Neighborhood" or under "Network". If it is not showing up under Network then check the network settings on both the Vista PC, ensuring it has the same Network Name/Network Workgroup (typically "workgroup") that the WD My Cloud uses under "Settings -> Network -> Network Workgroup". The other recommended suggestion is to configure the WD My Cloud for a static IP. Either within the WD My Cloud administration UI or within one's router/gateway. Both the Vista PC and the WD My Cloud should be in the same IP address subnet (for example both should have an IP address in the 192.168.1.x range). If you have not done so read through the WD My Cloud User Manual in particular "Using Windows XP/Vista/Windows 7" under "Getting to the Public Share" for the general procedure of accessing the WD My Cloud shared folders with Windows Explorer on Windows Vista.You and I are worlds apart on this issue. Your solution doesn't relate to my problem. I did not have a problem getting to or seeing the device in Vista. There were two problems and I believe I've cured both of them, though I don't know how. Problem 1: Vista keeps asking for drivers. When I connected the device to my network, Vista would see the device and try to locate drivers as if it had found a new printer. It couldn't find any so I had to close the driver request windows without finding drivers. The device then would show up in Device Manager under Other Devices with a yellow exclamation mark indicating the drivers were not loaded correctly. After several BSODs (for a different issue), I ran SFC and CHKDSK on my computer. Neither program found a problem. Then when I tried to connect the device again, Vista started looking for drivers and I walked away from the computer for the evening. When I had come back, it said the drivers were loaded. In Device Manager, Vista shows a new device category named "Western Digital NAS" with two devices installed: My Cloud Network Media Server and My Cloud Network Storage. The driver problem is now solved but I don't know how. Problem 2: Files I had loaded onto the shares to learn how to use the device can be seen in Windows Explorer. That was never a problem. However, as soon as I clicked on a file, the screen would scramble and then BSOD. This only occurred with files loaded onto the MyCloud device. After some blue screens, I started up into Safe Mode with Networking. I was able to click on the files without crashing, though Media Player wouldn't play them or even start in Safe Mode. I then did a clean boot and it tested okay. As I added items in MSCONFIG, the problem would not recur. There was one item that prevented me from even setting MSCONFIG to do a normal startup, and that was Kaspersky Internet Security 2015. Not only that, but I couldn't start the software at all. I did a complete removal of Kaspersky and then reinstalled it. I no longer have any BSODs. Both issues, as mysterious as they were, have mysteriously been resolved. I have a DLNA issue, but that's in another post. I also have a new issue with the WD My Cloud desktop app but I don't need to use that and if I do, I'll start a new discussion.

Satellite U500 (PSU9ME) - I'm looking for the Windows 7 display driver

I'm looking for the video card driver U500 PSU9ME. My operating system Windows 7 32Bit
Please help me ..

OFC my INF won't work because it is for nVidia g210m. You need to add Hardware ID of your display adapter, that can be found in Device manager, to the INF and try again, replace my PCI\VEN_10DE&DEV_0A74&SUBSYS_FF401179 with yours, other modifications + new drivers for 310m could be required.
I still don't understand why you installed x86 version of windows when laptop came with x64 with all drivers on it, and all of them can be downloaded from toshiba site.
Install Windows 7 x64 and you won't have these problems. Other option is Windows XP x86 if you NEED 32 bit OS, and I can't see why...

Window 7 drivers for nx9020

Looking for drivers for Video Controller and PCI Modem for nx9020 running windows 7 - hopefully someone can help me Thanks in advance
This question was solved.
View Solution.

Sure.
This is for the graphics...run the graphics driver and close out of any error windows.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=424540&spf...
Go to the device manager and click on the video controller needing drivers. Click on the driver tab. Click on update driver. Select the manual search and (I don't have XP anymore, so look for the option to select Have Disk).
Select Have Disk and browse to: C:\SWSetup\sp30308\ialmnt5, and select the Intel(R) 82852/82855 GM/GME Graphics Controller from the list and see if the driver installs that way.
Modem:
Run this driver...close out of any error windows.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=424540&spf...
Do the same thing but browse to C:\SWSetup\sp31129\hpm30805, and select the SoftV90 Data Fax Modem with SmartCP from the list and see if the driver installs that way.

Windows audio drivers for iMac Intel

Hi
I accidently deleted the Windows audio drivers on my machine. The audio works fine in Mac mode but errors out looking for the drivers in PC mode.
My brain errors out looking for the page with the proper drivers.
Any leads greatly appreciated..

Thanks for responding.
Yes, I have Boot Camp back-up CD (2 copies actually - 'Macintosh Drivers for Windows XP')
Error message I get when I run the set-up file from either copy: "Unable to locate file Macintosh Drivers for Windows.xp.msi."
Is there anywhere on line to download the drivers?
Thanks again

Windows 7 Drivers for iMac (Lion preinstalled)

While installing Windows 7 in my new iMac (LION preinstalled). When it’s creating the driver cd, while the drivers are being downloaded, the process comes to a halt (around 25% completion) and does not proceed any further. Now i have installed Windows 7 but dont have the drivers due to this reason, Please help. (my internet connection is working properly)

you didn't look for how to.
copy drivers to folder on Windows
then, Troubleshoot Compatiblity Mode on that BOOTCAMP64.msi
Voila
you could buy Lion and then download 4.01+ also

Looking for windows 7 drivers for an HP Pavilion 15-p151nr

Similar Messages

Maybe you are looking for