Looking for WS over email service proxy ??

Anyone hear / see a webservice over an Email service or proxy?
IE an email client needs to make WS / Soap calls to fetch email from my mindspring
email account.
Thanks, curt

Hi Curt,
Javamail [1] is part of j2ee 1.4 in the upcoming WLS release.
BEA supports http/s and jms transports for web services.
Regards,
Bruce
[1]
http://java.sun.com/products/javamail/
Curt Smith wrote:
>
Could you describe a business case?A thin email client written in Flash mx 2004, which is highly soap / wsdl fluent,
browses emails, fetches body, for multiple email accounts on POP and IMAP via
SOAP / XML message calls to what ammounts to a WS implementing a java mail API
proxy.
Does Bea have an email wrapper API? That would shorten my development cycle?
Or anyone seen an email WS implementation?
Thanks, curt

Similar Messages

  • Looking for; WS over Email proxy/service

    Anyone seen an example or a jump start for a WebService over an Email service or an Email proxy?
    IE a thick client makes WS / SOAP calls to this WS service that proxies the fetch mail / list of msgs from my POP3/IMAP mindspring account?
    Any tips would be appreciated.
    Thanks, curt

    I've found web services over sending an email, which is quite simple.
    I'm looking for parts or jump starts for browsing email on another server.
    Thanks, curt

  • Question:  I am looking for an Internet Faxing service for OS X 1.4.7

    I am looking for an Internet Faxing service to send and receive faxes via OS X 1.4.7
    Thx
    Dick

    I don't have a land line anymore at home. I am looking for a fax service over the internet.
    I can't recommend any but a quick Google of "internet fax service" turns up many.
    -mj
    [email protected]

  • Looking for software or a service with which I can create a personalized photo calendar

    I am looking for software or a service with which I can create a personalized photo calendar. Any recommendations?
    Jerry

    Thanks for the reply.
    iPhoto, unfortunately, has some real problems in my opinion. Control over image placement and size is limited. This is compounded by the fact that Apple has not made the job any easier by refusing to publish information such as recommended aspect ratios and pixel sizes of images used to create a calendar. Obviously, these both change as the page layouts change. But, I don't think it is too much to ask that Apple supply image aspect ratios for each frame size, 2:3, 3:4, 1:1, or something else. What pixel sizes are required for each frame size/aspect? It is impossible to place 2 photos (or 1 photo and a name) on one date should 2 birthdays fall on one day.
    Further, there is no recommendation for color space to be used by the printer.
    I am tired of trying out a photo in the calendar only to find it looks bad at the pixel size and aspect I chose, then have to go back to the original, re-crop, resize, and wrestle with bringing it back to iPhoto. (I use Aperture to organize my images.)
    I must also add that I had a very bad experience with an iPhoto book earlier this year. Don't know if Apple has fixed the problems as I refuse to invest another 20 hours of time and more then $150.00 to find out.
    I am seriously looking for something to replace iPhoto (unless changes are made) to do the 10 or 15 calendars for my family again this year (and possibly redo my book).
    Jerry

  • Looking for a particular email

    I have Mail backed up to TM as well as an external drive. I am looking for a particular email that has been backed up. I moved the particular mailbox from each of these drives to my desktop. They are .imapmbox files and would like to import these messages into Mail as a separate disposable folder.
    On the desktop they are #.emix files which are not easy to search.
    How to do this?
    Thanks

    I'm not sure. I know you can import mail stored locally by opening Mail and selecting Import from the File menu. Select the Apple Mail option then follow directions. A file Open dialog will appear and you must navigate to the /Users/username/Library/Mail/ folder and select the Mailboxes folder. If your mail is there then you can select the mailbox and import it. However, this does not work for IMAP accounts. Make a copy of the .mbox file that should have your mail. Again select Import from Mail's File menu. Select the bottom option to import .mbox mail and follow directions.
    Imported mail will appear in a separate sidebar header called Imported Mail.

  • Looking for a solution or service to export data from a dynamic form into a database

    As the title of this discussion states, I'm looking for a solution or service to export data from a dynamic form into a database to be used for reporting. Creating the dynamic form is not a problem, it's getting it into a database that's more of a nuisance. A dynamic form is needed in order to provide skip logic, hide/reveal, and other similar dynamic features.
    The database hasn't been created, so just looking for the easiest, more effective and dependable solution. The key is being able to run reports off the data later.

    So i set up 2 residential grade routers to test this out. Seems to be working okayish. I believe with directional antenae routers I should achieve what I need.
    As for security I configured each device separately. I set them so only allow the MAC address of the other through wireless. This seems to be the best system for me. Once they are connected even if a MAC is spoofed of the other router it drops automatically because they are always connected. My wired devices get plugged in and recieve an IP from my main network.
    There more testing to be done, but it seems to be working.
    Thanks for your input and suggestions guys. I will be marking this topic as answered.

  • I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

    I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

    Argh that's frustrating! I never noticed that key did not work in InDesign.
    A bit of research and it turns out the MS Office has this as an option in their software. But I cannot find an option in InDesign preferences to make this work.
    However, somethings are not listed in the shortcuts and preferences and are hidden triggers in InDesign which can be accessed through a script.
    I'm not saying it's possible to activate the Insert Key through a script, but it's plausible that it can be activated.
    Maybe ask on the scripting forum? InDesign Scripting
    I know this may be a possibility as with InDesign's earlier versions of PDF export to interactive documents there previously was no way to export interactive pdfs as single pages if in Spreads.
    But the option to toggle this setting was scriptable.

  • Calling external Web Service: PI is looking for a logical port and proxy.

    Hi,
    My scenario is  ECC Proxy -> PI -> External Webservice (WS adapter).
    the Web service adapter fails with the error message:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>System error while calling Web service adapter: Error when initializing SOAP client application: &#39;error_text&#39;</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    When I debug the message processing, it is looking for a port in table SSRVRTCONFIG, finds it(entry created automatically when WS adapter and the corresponding receiver agreement is activated in ID.
    Then the program looks for an entry in "SRT_CFG_CLI_ASGN" for a proxy and logical port combination and errors out.
    to be able to call an external web service, do we need a proxy to be created? I tried to create but the proxy creation fails because the external WSDL has some unsupported tags.
    Also do we need to do any other configuration in SOAMANAGER? I am assuming not because the Web service is external.
    Any help would be appreciated.
    Thanks
    Vijay

    I already checked that note and made sure that the points mentioned are met. I have a trace set up on the target system and would know if the call reaches them and then fails in authorization. Right now the call doesnt even reach the target system and also from debugging I know that the program is looking for a proxy and then fails.

  • Looking for some test emails....

    In particular I want to test parsing an email where the Message is an inline attachment of some sort. I can't seem to create an email with any of my clients that is an inline attachment. Seems like they are always Parts. Is there any place I can find some emails for testing?
    Thanks,
    Michael

    I'm not sure exactly what sort of message you're
    looking for. You can easily create a message
    with another message as an attachment using
    JavaMail. You can also do the same using
    Thunderbird (select "forward messages as
    attachments" instead of "inline").
    An attached message always appears as the
    content of a Part of type message/rfc822. The
    getContent method of such a Part will return
    a MimeMessage object.
    See the JavaMail FAQ for more on forwarding messages.

  • URGENT **** Need help for JAX-RPC Web Service Proxy deploy to OC4J 10.1.3.5

    Hi everyone!
    I’m really new to web services.
    I’m getting a *500 internal server error* while deploying my JAX-RPC web service Proxy to an Oracle AS, in an OC4J, v. 10.1.3.5.0.
    Running my client from my development environment (*jdeveloper 10g, 10.1.3.5.0*) everything functions correctly: from jdeveloper I can contact and use the web service defined by the following endpoint: https://www.medialibrary.it/services/federaMLOL.asmx?WSDL
    I created a "try_ws_client.jsp" file that runs correctly from my local development environment jdeveloper (that uses an embedded oc4j, v. 10.1.3.5.0) but fails when run from the test server (Oracle AS, in an OC4J, v. 10.1.3.5.0), getting, as I mentioned a 500 internal server error, a white page in IE but with FF the message says: The’s an error in the servlet .....
    Here's how I created the ws proxy and how I’m using it to consume the ws I mentioned.
    1. I used the jdeveloper “Create Web Service Proxy” wizard (File > New > Business Tier > Web Services > Web Service Prox) and in the WSDL document URL I put: https://www.medialibrary.it/services/federaMLOL.asmx?WSDL
    2. The operation ended without adding nothing to the web.xml file and creating the proxy files. One of them is: FederaMLOLSoapClient.java that have the WS exposed methods (es: public boolean createUser(String) ) + a “main” method with the example how to use this client to consume the WS.
    public static void main(String[] args) {
    try {
    it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient myPort = new it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient();
    System.out.println("calling " + myPort.getEndpoint());
    // Add your own code here
    } catch (Exception ex) {
    ex.printStackTrace();
    3. In FederaMLOLSoapClient.java I’ve create the method "tyIt":
    public String tryIt(String username) {
    try {
    it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient myPort = new it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient();
    if(myPort.createUser(String username)) {
    return “O.K”;
    } else {
    return “K.O”;
    } catch (Exception ex) {
    // logs error
    4. I created my try_ws_client.jsp file that creates FederaMLOLSoapClient object and calls the tryIt method, printing the “OK” or “KO” message.
    <%@ page import="it.reggiocity.provincia.biblioreggiane.*"%>
    <%
    String message = "";
    FederaMLOLSoapClient obj= new FederaMLOLSoapClient( );
    message = obj.tryIt(“AAAAAA70R10H226H”);
    %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <%@ page contentType="text/html;charset=windows-1252"%>
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
    <title>prova</title>
    </head>
    <body><%=message%></body>
    </html>
    The situation is:
    My try_ws_client.jsp runs correctly from my jdeveloper and the user is created while creating app.ear and deploying it to my Oracle AS/OC4J as mentioned above, I get a 500 Internal Server Error.
    Any idea to find a solution to this problem?
    Please help.
    Take care.
    John M.

    Hi,
    you want to build the Web Service, or you want to consume the Service as a client? If the latter, Web client (ADF?) or Java client?
    Frank

  • Look for JDeveoper 10g Web Services Samples

    We would like to use JDeveloper 10g to create Web Services and create JSP pages to use them.
    If you know a good starting point or where I can find examples, please let me know. I have found some for 9i, but I hope 10g will make the job easier.
    Thanks a lot.

    My original message was referring to Mike's following response.
    The problem is, in the oc4j10.0.3 generated stub, there is no
    m_httpConnection = new OracleSOAPHTTPConnection();
    so how do you set up the proxy properties to the connection?
    Quote
    It may be that you require a proxy server, optionally with proxy authentication to access the Internet from within your intranet. If you are using a proxy server as I am guessing here, look inside your stub for the line that reads:
    m_httpConnection = new OracleSOAPHTTPConnection();
    then after it add these lines:
    Properties props = new Properties();
    props.put(OracleSOAPHTTPConnection.PROXY_AUTH_TYPE, "basic");
    props.put(OracleSOAPHTTPConnection.PROXY_USERNAME, "proxy_username");
    props.put(OracleSOAPHTTPConnection.PROXY_PASSWORD, "proxy_password");
    props.put(OracleSOAPHTTPConnection.PROXY_HOST, "proxy-host");
    props.put(OracleSOAPHTTPConnection.PROXY_PORT, "80");
    m_httpConnection.setProperties(props);
    where "proxy_host" is your proxy serve, "80" is your proxy server port and if your proxy requires a username/password, update the lines above where username and password are defined; otherwise delete those lines.
    Mike.
    unquote

  • HT201250 i am looking for a old email.  I already finished migration and it shows successful.  But, i can't find the old email record .  Where is the file?

    I want to restore the email from time capsule.  After migration and it shows successful, but, I still cannot find the email data.  Pls adv

    The missing file thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    At guess you've used a different profile name. Files inside the media folder have survied the transfer, but those outside are expected to be on the same absolute file paths, but no longer are.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes.
    tt2

  • What port for osx server web services proxy server?

    I was just wondering, my server has a proxy server working on 10.1.0.xxx what should i put in the client mac network settings so it can use the proxy server should i point it at 10.1.0.xxx or the domain name and what port is the usual for the proxy server?

    There is no set standard for the port number. It's whatever you configured.
    As for hostname vs. IP address - it doesn't really matter. If the client can resolve the hostname correctly then you can use that.
    Personally, though, I'd always use a hostname such as 'proxy.mydomain.com' so that I could easily move the proxy service to a different machine if needed just by changing the DNS entry (not something that is easy to do if you have many machines all connecting via IP address).

  • Looking for those 500 enterprise services

    Hello,
    I'm new to SAP and interested in developing apps atop NetWeaver. In his webcasts Shai often refers to "500 documented enterprise web services" (or something similar).
    Where are these services documented and how can I get ahold of this document?
    Thanks,
    Douglass Turner
    Vice President of Technology
    Visual i|o

    The below document should help you.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f6cd467-0301-0010-b099-8bea6d075978
    At the same time take a look at this link.
    https://www.sdn.sap.com/sdn/index.sdn?page=ESP/home.htm
    This works for me. However in order to access the system you should request and get the access.
    On the other hand if you have mySAP ERP, you should have the services. Go to SE80 and execute the BSP application "WebServiceBrowser" and you should be able to see the list of services.
    Regards,
    Ravi
    Note : Please reward points if this answer helps you.

  • I have an Iphone4. I had my computer with all my music unfortunately my computer stop working so now how can I tranfer all my music to my new computer. So i wont have to look for the over 1000 songs that I already have. do u know how to fix this?

    any suggestions....

    Sync is only oneway, from PC to your device. Unless you have the music on your PC, iTunes is going to wipe out what you have on your device if you are syncing to a new library.
    You can only transfer Purchased music over to Itunes on your PC.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
    http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

Maybe you are looking for