Looking part time job or project.

Hi,
I am Labview certifier
Developer(CLD). and I am looking part time job or project. If any one
intreast ,so please mail me on [email protected]
Thanks
labview.solution

Maybe adding your location would help?
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Similar Messages

Looking for LabVIEW part time job ,Beijing China

Seeks the LabVIEW part time job ,Beijing China The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Siemens CompanyTips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email: [email protected]

you can visit my website: www.bjcyck.com

Looking a part-time job

Dear all:
I've use LabVIEW to develop test software more than 4years. I'm looking a part-time job now.
E-mail: [email protected]
¤╭⌒╮ ╭⌒⌒╮
╱-◥?80?80◣ ╭ ╭
︱田︱田田|
Boone Mail:[email protected]
QQ:24732458
QQ Group:13267790
QQ Comp: 17756234
╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬
Boone

This thread is for posting of job openings, You will probably have better luck posting on the thread for those looking for positions.
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Seeks the LabVIEW part time job ,Beijing China (6 years exp)

Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]

The appropriate message board for this is LabVIEW Developers Seeking Employment

Seeks the LabVIEW part time job ,Beijing China

Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]

The appropriate message board for this is LabVIEW Developers Seeking Employment

Cool part time job....check this....

Hi,
This is a genuine oppurtunity to work from home.
You a get paid an initial amount of Rs.100 if you just sign up. Then your job will be posted to you.
Its cool. Try it out and see for yourself. After signing up, click on My Earning Link for proof. You`ll know the truth.
Job is only through Internet. Work part time. You can earn Rs.750-2000/- daily. These are genuine Internet jobs. No Investment required.
For more details visit http://www.earnparttimejobs.com/index.php?id=762838

hi ,
i dont know whether this is a good or fake link .. but
when i signed up in the site i got the following link ..
[http://www.earnparttimejobs.com/index.php?id=1144392]
looks pretty good but cant keep and eye over it for long

Software Systems Engineer (LV, LV RT, LV FPGA, CVI TestStand, Veristand, C/C++) available for full/part time and remote project work

I am a software engineer with lots of experience in embedded and test systems. I am a certified TestStand developer, and recently finished a cRIO based embedded system for a medical device company using LV RT and LV FPGA. I have done a lot of TestStand customization and APIs to HIL and other test equipment and created my share of Windows/Linux based C++ applications and libraries.
I am located in Southeast Michigan and interested in both local and remote project work, as well as full or part time employment.
I will be at NIWeek 2010 on Wednesday and Thursday. I am holding a session on Simple TCP/IP messaging on Thursday.
If you would like to meet during NIWeek and/or request my resume please email me at [email protected]

I saw your posting on the LabView discussion forum concerning your need for a LabView Software Systems Engineer.
I am a consultant and I am currently available for contract work.
I have done the things you describe as experience you would like to have.
I have attached a "Fact Sheet" which describes some of the systems I have built.
You will notice that I am experienced with developing hardware systems and controls as well as software systems..
I have over 20 years of experience developing these kinds of systems and have worked with many different kinds of hardware/computer interfaces as well as numerous different software environments.
If you are interested in discussing this further please call or email me.
Tom Moser
ForMost Systems
North Canton Ohio
330-470-0404 begin_of_the_skype_highlighting 330-470-0404 end_of_the_skype_highlighting x202
email: [email protected]
Attachments:
IS 071410a .pdf ‏253 KB

CLD Certified Engineer Looking for Part Time Job

I am a Certified LabVIEW developer with around 3 Yrs of experience in developing LabVIEW based applications. I am currently working on Version 8.5. I have worked with Analog, Digital, GPIB, CAN, J1850 and Serial protocols. I have also worked on Non NI devices such as AB PLC controllers. I have developed small to complex standalone applications. Some of them were production in-line systems.
I can work in the evenings and during weekends. I can send my resume if needed.

I am interested in reviewing your resume. Please send to [email protected]

Looking for LabVIEW job in Beijing,China

Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]

There is another board for seeking jobs. Why not try looking for it instead of posting the same thing over and over?
As for your first two lines, you may want to consider revising them, should you post the job seeking board. "Seeks the job" -- should be something like "I am seeking a job". I don't know what appropriate knocks are, and I don't think anyone else does, either.
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Is there a relationship between InfoPath and the "Solution Approval" and "Solution Unpublish" timer jobs?

One of our developers has a test SP 2010, service pack 2 system. Against it, he is testing form library InfoPath 2010 applications that he is developing.
There are, over the 2 months he has been working, an increasing number of times that the machine becomes so slow as to be unusable. For instance, in his attempt to publish an updated form this morning, the publish time was about 2 hours.
I see nothing obvious in the event log.
However, in the 5.7 million line 14 hive log, there are 5.6 million lines of the form:
Solution Deployment : Deleting directory C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\Template\Features\FT-01-6d499aed-f899-c88e-5f7e-8dad243ccaf1\solution.xsn.1.0.0.1018.1.0.0.735. Delete if not empty. ae8f490c-f1bf-4f25-92aa-6fc8e0de7de5
When I look in the Features subfolder, there are over 13k of folders containing a solutions.xsn and a DLL with the name of the application.
These folders date back to when the work began.
When I look at timer job history , all I see are status of Succeeded.
But I do notice that every minute a series of 6 Solution Approval and 6 Solution Unpublish timer jobs run.
Since the timer says to run every minute, I suspect that something is wrong with the jobs.
This being a test machine, there is no reason to have 13k of old copies of the form and dll. He is not going back to one of those as far as I am aware.
Is there some action that he should be taking that should be "cleaning up" this situation?
Is there something that a SP admin could do to clean things up so that things no longer take so long to run and create such large log files?
Thanks for your ideas.

Try using this document to locate the tag: http://goo.gl/GDeRb
It could have worn off, depending on how long you have had the notebook and what kind of conditions it has been through.
Also, where did you happen to purchase it from?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Experienced LabVIEW Engineer looks for part time projects

Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
Looks for smaller part time projects (that can be performed at distance).

Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available.

Part-time labview job

Hello ,
I am looking for a part-time labview job, remotely.
Have 6 years labview experience, participated on different projects.
Main qualifications - large scale software architecture,costum hardware IO, signal processing.
Recently started to work as a freelancer, my page at oDesk.
Regards,
Michael.
LV 8.2 at Windows & Linux

我们现有一项目需聘兼職LabVIEW工程師，有意请电邮：[email protected]

Look for LabVIEW part time programming

Hi,
I am available for part time LabVIEW programming. Areaingapore.
Certified LabVIEW Developer.
Currently resides at Spore. Look for LabVIEW project.
Please email me at [email protected]
BR,
Bug Killer

you can visit my website: www.bjcyck.com

CLA/CTA - looking for part-time challenges - San Francisco Bay Area

I am looking to do some freelancing and/or part-time work towards LabVIEW/TestStand. Please send me a private message if interested and I can share details.
Kudos always welcome for helpful posts

Seeking help to delete calls to a Martox frame grabber and install NI-1433.
If interested, please call 5129213691
Thanks
Stan Jasinski
VisTec Engineering

Project Server 2013: Synchronization of AD with security groups - missing from list of timer jobs

I have same problem in:
http://social.msdn.microsoft.com/Forums/en-US/2b916bb9-2277-4c53-8b97-271a912414ba/ps2013-timer-job-missing-quotproject-server-synchronization-of-ad-with-security-groups-forquot
"I cannot find timer job in SPS central administration "Project Server: Synchronization of AD with security groups for <PWAIntanceName>" to schedule synchronization. Enterprise Resource Pool synchronization working fine and timer job
"Project Web App: Synchronization of AD with the Enterprise Resource Pool job for <PWA site name>" exist on server."
Don't offer solution for "Schedule Enterprise Resource Pool synchronization".
Only "Timer job in SPS central administration "Project Server: Synchronization of AD with security groups".
Have a solution?

Project Server timer job "Synchronization of AD with security groups" don't exist.
So I created job in Task Scheduler of Project Server OS, that every day start PowerShell-script:
if ((Get-PSSnapin | where {$_.Name -eq "Microsoft.SharePoint.PowerShell"}) -eq $null)
Add-PSSnapin Microsoft.SharePoint.PowerShell
Invoke-SPProjectActiveDirectoryGroupSync –Url http://project/pwa
Security groups of Project Server automatically synchronize with groups from AD!
http://technet.microsoft.com/en-us/library/jj219472.aspx

Looking part time job or project.

Similar Messages

Maybe you are looking for