Looking To Add Visible Counter For Reference

Hi Gang
Was wondering how I can add a counter that would appear directly on footage which was exported/burned to DVD? Why do I need to that?
I have extensive video from German veterans that needs translating as I'll be sending it back to the translator who helped me in Dresden. Easiest way, no-brainer, (since she doesn't edit video), would be to send her a DVD which would have a running counter directly over the footage, (lower left hand corner).
In turn, she'll send me digital voice files, (thru the mail), and will mention where her translations begin and end.
Any ideas?
Thank you
Mike
http://www.vimeo.com/7340608

We've done similar projects but not nearly as complex. An important function that you may overlook, is timecode references are supposed to absolute. No matter who looks at what copy or which edited version of anything, the timecode on any particular clip should always be the same. How you accomplish that is up to you because timecode can get stripped or replaced as your film moves through its pipeline.
Let's say your clip of Jurgen Habermas is 30 minutes long but it consists of two separate clips. Do you start the timecode at 00:00:00 because the assembled clips are really one program or do you display the timecode from the camera? Whichever method you choose can end up being totally wrong but, generally, we try to use only the timecode from the camera original footage for everything until the picture is locked and then we start using the timecode for the program.
bogiesan

Similar Messages

Looking For References on the K9A2 CF Motherboard

I am upgrading my wife's PC. She has an old MSI mobo with an Athlon64 Socket 754. This Motherboard will have my current Phenom 9500 and an MSI 8800GTSOC(g92) as I move to a Phenom II 940 + 295GTX
I am looking for references on this board which I have identified as the best suited for my wife's type of work (Browsing,Office, Itunes, etc). It looks quite good and Cheap and all the MSI stuff I have had in the past has served me well.
TIA;
Jorge

Quote from: Cahu on 16-January-09, 08:38:56
If you have an nvidia chipset video card don't buy an ati chipset mobo!
They are not compatible!
Cheers!
Sorry, but thats just completely misinformed rubbish.

Set visibility property for items depending on other items

Hello,
I want to set the visibility setting for an item that I have, the steps should be as the following,
for example
if I have an item that asked,
do you have children ?
if the answer is Yes,
the next item should be visible which let's say, number of them
if no,
the next item should be not visible
I tried to set a trigger for the item I am controlling its visibility which is
pre-text-item and wrote
if 'CHEQUE_TABLE.CHEQUE_RECIEVED'='yes'
then
set_item_property(:SYSTEM.CURRENT_ITEM,visible,property_true) ;
else
set_item_property(:SYSTEM.CURRENT_ITEM,visible,property_false) ;
end if;
but it doesn't seem to be right, ,,,
thank you

I can see two potential problems. The first:
if 'CHEQUE_TABLE.CHEQUE_RECIEVED'='yes'
Does CHEQUE_TABLE.CHEQUE_RECEIVED refer to a Data Block and Item? If yes, then you are trying to tell Forms to look at the value of the string 'CHEQUE_TABLE.CHEQUE_RECEIVED' when you should be refering to the value of the Block.Item through direct reference, eg:
IF :CHEQUE_TABLE.CHEQUE_RECEIVED = 'yes'
How is the value of CHEQUE_RECIEVED set? Does the user select the YES value from a List of Value (LOV) or from a Poplist or do they enter the value by typing it in? If your code is looking at the string 'yes' and comparing it to the value of the Block Item which is in upper or mixed case, then 'yes' = 'Yes' or 'yes' = 'YES' will evaluate to FALSE instead of TRUE.
It is always a good idea to use a Poplist or a List of Values when you are expecting specific values to be entered by the user; this enables you to force the value to be entered the same by everyone. If the user CAN type the value in, then at least set the Case Restriction property to UPPER or LOWER so regardless of how the user enteres the value, it will be stored in the corrected case.
Craig...

Looking to add some functionality into Wiki pages??

Hi,
i am looking to add some functionality into SharePoint Wiki pages. There should be a comment section into the page, so that users can comments on the article, also wants to display list of people who ever read this article or visited that page. Please suggest
any expertise idea or link?
Thanks in advanced!

Hello,
Note board is helpful to add comment box in page layout. Edit your page in designer and add this WP next to the <PublishingWebControls:RichHtmlField
<SharePointPortalControls:SocialCommentWebPart id="noteboard" ChromeType="None" runat="server" />
For second task, you can utilize the web analytic feature but this will be applicable to whole site, not single page. So you may create a custom page and use code to generate report for single page.
http://www.sharepoint911.com/blogs/laura/Lists/Posts/Post.aspx?ID=135
http://www.sharepointpals.com/post/Step-by-steps-on-how-to-display-Most-Visited-Sites-with-number-of-view-count-in-SharePoint-2013-Web-Analytics
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

How to add mouse listener for a single row alone

I have a requirement. In a JTable when I double click a particular row the cells in the row should set to the width which I have provided.
The problem with my code is when I click fourth row in the table, the first row gets adjusted.
So how I need help is
only if I click the first row, the first row cell size should get adjusted not when I click fourth row.
Similarly if I give some cell width and height for fourth row cells, then when I double click the fourth row, the fourth should alone get adjusted and not the other rows.
Hope I have explained clearly.
How can it be achieved?
Please find below my code. Everything is hardcoded. So it may look messy. Please excuse.
// Imports
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JTextArea;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
class SimpleTableExample extends JFrame {
// Instance attributes used in this example
private JPanel topPanel;
private JTable table;
private JScrollPane scrollPane;
String data1 = "";
String data2 = "123456789ABCDEFGHIJKLMNOPQRSTUVQWXYZabcdefghijklmnopqrstuvwxyzaquickbrownfoxjumpedoverthelazydog";
int size = data2.length();
// Constructor of main frame
public SimpleTableExample() {
 // Set the frame characteristics
 setTitle("Simple Table Application");
 setSize(400, 200);
 setBackground(Color.gray);
 // Create a panel to hold all other components
 topPanel = new JPanel();
 topPanel.setLayout(new BorderLayout());
 getContentPane().add(topPanel);
 // Create columns names
 String columnNames[] = { "SEL", "DESIGN DATA", "PART NUMBER" };
 // Create some data
 String dataValues[][] = { { data1, data2, "67", "77" },
 { "", "43", "853" }, { "", "89.2", "109" },
 { "", "9033", "3092" } };
 DefaultTableModel model = new DefaultTableModel(dataValues, columnNames);
 model.addColumn("PART TITLE");
 model.addColumn("SPECIAL INSTRUCTIONS");
 table = new JTable(model) {
 public boolean isCellEditable(int rowIndex, int colIndex) {
 return false;
 // set specific row height
 table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
 int colInd = 0;
 TableColumn col = table.getColumnModel().getColumn(colInd);
 int width = 50;
 col.setPreferredWidth(width);
 int colInd2 = 1;
 TableColumn col2 = table.getColumnModel().getColumn(colInd2);
 int width2 = 100;
 col2.setPreferredWidth(width2);
 int colInd3 = 2;
 TableColumn col3 = table.getColumnModel().getColumn(colInd3);
 int width3 = 10;
 col3.setPreferredWidth(width3);
 int colInd4 = 3;
 TableColumn col4 = table.getColumnModel().getColumn(colInd4);
 int width4 = 10;
 col4.setPreferredWidth(width4);
 int colInd5 = 4;
 TableColumn col5 = table.getColumnModel().getColumn(colInd5);
 int width5 = 10;
 col5.setPreferredWidth(width5);
 table.addMouseListener(new MouseAdapter() {
 public void mouseClicked(MouseEvent e) {
 if (e.getClickCount() == 2) {
 JTable target = (JTable) e.getSource();
 int row = target.getSelectedRow();
 int column = target.getSelectedColumn();
 TableColumn col1 = table.getColumnModel().getColumn(0);
 col1.setPreferredWidth(50);
 TableColumn col2 = table.getColumnModel().getColumn(1);
 col2.setPreferredWidth(400);
 table.getColumnModel().getColumn(1).setCellRenderer(
 new TableCellLongTextRenderer());
 table.setRowHeight(50);
 TableColumn col5 = table.getColumnModel().getColumn(4);
 col5.setPreferredWidth(200);
 // Create a new table instance
 // table = new JTable(dataValues, columnNames);
 // Add the table to a scrolling pane
 scrollPane = new JScrollPane(table);
 topPanel.add(scrollPane, BorderLayout.CENTER);
// Main entry point for this example
public static void main(String args[]) {
 // Create an instance of the test application
 SimpleTableExample mainFrame = new SimpleTableExample();
 mainFrame.setVisible(true);
class TableCellLongTextRenderer extends JTextArea implements TableCellRenderer {
public Component getTableCellRendererComponent(JTable table, Object value,
 boolean isSelected, boolean hasFocus, int row, int column) {
 this.setText((String) value);
 this.setWrapStyleWord(true);
 this.setLineWrap(true);
 // set the JTextArea to the width of the table column
 setSize(table.getColumnModel().getColumn(column).getWidth(),
 getPreferredSize().height);
 if (table.getRowHeight(row) != getPreferredSize().height) {
 // set the height of the table row to the calculated height of the
 // JTextArea
 table.setRowHeight(row, getPreferredSize().height);
 return this;
Edited by: 915175 on Aug 3, 2012 4:24 AM

Hi
Try below code. Hope this will help
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JTextArea;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
public class SimpleTableExample extends JFrame {
private JPanel topPanel;
private JTable table;
private JScrollPane scrollPane;
String data1 = "";
String data2 = "123456789ABCDEFGHIJKLMNOPQRSTUVQWXYZabcdefghijklmnopqrstuvwxyzaquickbrownfoxjumpedoverthelazydog";
int size = data2.length();
// Constructor of main frame
public SimpleTableExample() {
// Set the frame characteristics
setTitle("Simple Table Application");
setSize(400, 200);
setBackground(Color.gray);
// Create a panel to hold all other components
topPanel = new JPanel();
topPanel.setLayout(new BorderLayout());
getContentPane().add(topPanel);
// Create columns names
String columnNames[] = { "SEL", "DESIGN DATA", "PART NUMBER" };
// Create some data
String dataValues[][] = { { data1, data2, "67", "77" },
{ "", "43", "853" }, { "", "89.2", "109" },
{ "", "9033", "3092" } };
DefaultTableModel model = new DefaultTableModel(dataValues, columnNames);
model.addColumn("PART TITLE");
model.addColumn("SPECIAL INSTRUCTIONS");
table = new JTable(model) {
public boolean isCellEditable(int rowIndex, int colIndex) {
return false;
// set specific row height
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
int colInd = 0;
TableColumn col = table.getColumnModel().getColumn(colInd);
int width = 50;
col.setPreferredWidth(width);
int colInd2 = 1;
TableColumn col2 = table.getColumnModel().getColumn(colInd2);
int width2 = 100;
col2.setPreferredWidth(width2);
int colInd3 = 2;
TableColumn col3 = table.getColumnModel().getColumn(colInd3);
int width3 = 10;
col3.setPreferredWidth(width3);
int colInd4 = 3;
TableColumn col4 = table.getColumnModel().getColumn(colInd4);
int width4 = 10;
col4.setPreferredWidth(width4);
int colInd5 = 4;
TableColumn col5 = table.getColumnModel().getColumn(colInd5);
int width5 = 10;
col5.setPreferredWidth(width5);
// Cell Render should apply on each column -- add by Rupali
for(int i=0; i< table.getColumnModel().getColumnCount(); i++){
table.getColumnModel().getColumn(i).setCellRenderer( new TableCellLongTextRenderer());
table.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
JTable target = (JTable) e.getSource();
int row = target.getSelectedRow();
int column = target.getSelectedColumn();
setTableCellHeight(table,row,column); //Added by Rupali
TableColumn col1 = table.getColumnModel().getColumn(0);
col1.setPreferredWidth(50);
TableColumn col2 = table.getColumnModel().getColumn(1);
col2.setPreferredWidth(400);
TableColumn col5 = table.getColumnModel().getColumn(4);
col5.setPreferredWidth(200);
// Create a new table instance
// table = new JTable(dataValues, columnNames);
// Add the table to a scrolling pane
scrollPane = new JScrollPane(table);
topPanel.add(scrollPane, BorderLayout.CENTER);
* Created By Rupali
* This will set cell's height and column's width
* @param table
* @param row
* @param column
public void setTableCellHeight(JTable table, int row, int column) {
// set the JTextArea to the width of the table column
setSize(table.getColumnModel().getColumn(column).getWidth(),
getPreferredSize().height);
if (table.getRowHeight(row) != getPreferredSize().height) {
// set the height of the table row to the calculated height of the
// JTextArea
table.setRowHeight(row, getPreferredSize().height);
// Main entry point for this example
public static void main(String args[]) {
// Create an instance of the test application
SimpleTableExample mainFrame = new SimpleTableExample();
mainFrame.setVisible(true);
class TableCellLongTextRenderer extends JTextArea implements TableCellRenderer {
public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus, int row, int column) {
this.setText((String) value);
this.setWrapStyleWord(true);
this.setLineWrap(true);
return this;
}

How to get row count(*) for each table that matches a pattern

I have the following query that returns all tables that match a pattern (tablename_ and then 4 digits). I also want to return the row counts for these tables.
Currently a single column is returned: tablename. I want to add the column RowCount.
DECLARE @SQLCommand nvarchar(4000)
DECLARE @TableName varchar(128)
SET @TableName = 'ods_TTstat_master' --<<<<<< change this to a table name
SET @SQLCommand = 'SELECT [name] as zhistTables FROM dbo.sysobjects WHERE name like ''%' + @TableName + '%'' and objectproperty(id,N''IsUserTable'')=1 ORDER BY name DESC'
EXEC sp_executesql @SQLCommand

The like operator requires a string operand.
http://msdn.microsoft.com/en-us/library/ms179859.aspx
Example:
DECLARE @Like varchar(50) = '%frame%';
SELECT * FROM Production.Product WHERE Name like @Like;
-- (79 row(s) affected)
For variable use, apply dynamic SQL:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Rows count all tables:
http://www.sqlusa.com/bestpractices2005/alltablesrowcount/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Table creation Error "Ref Count for this object is higher than 0"

Hi All
I have a problem in creation of table using SDK on a button event. I have a procedure to create tables and fields. If I call this procedure on a menu Event than it works fine but If I call this procedure on a button event than It gives error "Ref count for this object is higher than 0" . I know this error occur When an object does not release after creating a table. but this error occur at when first table is created. My code it given below. plz see and give me your valuable suggestions.
Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
 Try
 oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
 oUserTablesMD.TableName = "AM_OBIN"
 oUserTablesMD.TableDescription = "PutAway Table"
 oUserTablesMD.TableType = BoUTBTableType.bott_Document
 lRetCode = oUserTablesMD.Add
 '// check for errors in the process
 If lRetCode <> 0 Then
 B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
 MsgBox(sErrMsg)
 Else
 B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
 End If
 System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
 oUserTablesMD = Nothing
 GC.Collect()
 oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
 oUserTablesMD.TableName = "AM_BIN1"
 oUserTablesMD.TableDescription = "PutAway Upper Grid"
 oUserTablesMD.TableType = BoUTBTableType.bott_DocumentLines
 lRetCode = oUserTablesMD.Add
 '// check for errors in the process
 If lRetCode <> 0 Then
 If lRetCode = -1 Then
 Else
 B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
 MsgBox(sErrMsg)
 End If
 Else
 B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
 End If
 System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
 oUserTablesMD = Nothing
 GC.Collect()
 Catch ex As Exception
 MsgBox(ex.Message)
 End Try
Thanks
Regards
Gorge

Hi Gorge,
The "Ref count error..." usually occurs in case of Meta Data objects not being properly cleared. And yes, you have got the error in the right place, generally while creating tables / fields / UDOs. For this, you just need to clear the Meta Data object (At times even DI objects like Record Set) once they are used.
Eg: Release these objects in the below way in a Finally Block.
System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
Hope this helps.
Regards,
Satish

IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball. I almost think it is looking in the wrong place for the pictures. How do I redirect it back to the Mac hard drive?

My iPhoto is not responding. Whenever I click on the iPhoto icon I get a twirling beachball. It is as if the machine is looking in the wrong place for the photos. How can I see where the machine is looking to find out if this is really the problem. How can I see the path?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
If that's the case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Validation error on retry count for session bean

Hi,
In our weblogic-ejb-jar.xml we have configured a retry count for a specific method on a local session bean. When I click on 'Browse' to select a specific method, it only shows '*' as a possible value. When we type the method name by hand, it shows a red cross next to the input field with the error 'Cannot find method "exampleMethod()" in the ExampleBean's Local interfaces'.
We use EJB 3.0 and OEPE 12.1.1.0.1 with Eclipse 3.7.2
The weblogic-ejb-jar.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<weblogic-ejb-jar xmlns="http://xmlns.oracle.com/weblogic/weblogic-ejb-jar"
 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
 xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd http://xmlns.oracle.com/weblogic/weblogic-ejb-jar http://xmlns.oracle.com/weblogic/weblogic-ejb-jar/1.2/weblogic-ejb-jar.xsd">
 <retry-methods-on-rollback>
 <retry-count>3</retry-count>
 <method>
 <ejb-name>ExampleBean</ejb-name>
 <method-intf>Local</method-intf>
 <method-name>exampleMethod</method-name>
 </method>
 </retry-methods-on-rollback>
</weblogic-ejb-jar>The bean looks like this:
@Stateless(mappedName = MappedName.DONNA)
@TransactionAttribute(value = TransactionAttributeType.REQUIRES_NEW)
public class ExampleBean implements Example {
}And the interface:
@Local
public interface Example {
}Does anyone else have this problem?
Thanks.
Pieter

Hi Pieter,
This is a known issue and I will keep you posted on the development.
Thanks for your feedback!
-Ram

How do I create a small, for-reference-only version of my master library?

I have a 600GB Aperture 3 Managed library on my iMac's external hard drive. I use this as the master editing platform for my Aperture library and edits. I have no Referenced images. Everything is in the Managed library, mainly as RAW files.
I would love to have a smaller, portable but otherwise identical (structure/metadata etc) version of this Aperture library on my MacBook Pro, just for reference and for showing images to people. JPEGs would be fine, say at 1920 x 1200 pixels (or whatever is practical for my laptop's available disk space. The key thing is that the second (smaller) library would be in Aperture so that I have access to the same project structures I use on the main system, and can use Aperture's search and metadata capabilities to find images quickly.
I've spent some time looking but can't find a way of doing this. Can anyone offer any advice?

Here is what I am saying - you are not locked forever any such way. You can move your files back and forth at any time - managed to referenced - referenced to managed. You don't even have to go one way or the other - you can even select all of your files that are older than a certain date and under 3 stars - any criteria - make them referenced and automatically put them in folders by project. You can slice and dice managed/referenced any way you like by any search criteria and put them back again with search criteria and two functions relocate and consolidate. I do this all the time and have for years.
If you insist on not using the tools Aperture gives you to accomplish what you want you will probably be disappointed that there is not a menu item that exists for your exacting desire in the toolbar. If you learn how to put Aperture facilities together you can accomplish just about anything very quickly in a step or two - and then change your mind back.
I am just trying to show you that it is very limiting to thing about the ONE way you are going to use this tool. You tailor it for the here and now and then change it back.
RB
Ps. All this stuff is on my site as well in terms of the how to's.

In SD i am looking to add some

In SD i am looking to add some custom fields to the delivery document. can any one help me out
document. can any one help me out

Check out some of badis or an userexits .
These are list of userexits and enhancement ,
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
Please reward if useful.

In SD i am looking to add some custom fields to the delivery document.

In SD i am looking to add some custom fields to the delivery document. can any one help me out.

hi,
u have get the access key for the program with respective to the delivery document & user exit has has to done.
This is job of abaper
regards,
Arun prasad

Looking To Add Visible Counter For Reference

Similar Messages

Maybe you are looking for