Looking to connect konica bizhu c360 to my macbook pro

I am looking to connect a my Macbook Pro to connect to a Konica bizhu C360 a shared printer at work

The thunderbolt port will accommodate the minidisplay adapter. Here are some representative alternatives:
http://www.amazon.com/s/?ie=UTF8&keywords=vga+mini+display+port&tag=googhydr-20& index=aps&hvadid=9661407397&hvpos=1t1&hvexid=&hvnetw=g&hvrand=910310966178297733 &hvpone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_lb42ylsse_b
Note that VGA does not support audio if that is of importance in your situation. The audio output port would have to be tapped.
Ciao.

Similar Messages

Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.

Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.

Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next.   Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand.

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance

How do I connect an external microphone to a Macbook Pro with Retina display ?

How do I connect an external microphone to a Macbook Pro with Retina display ?
Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?

Plug it into the linein/headphone jack if there's just one. It'll switch between the two modes automatically depending on what you plug into it.

Connect my apple tv with my macbook pro

how can I connect my Apple TV to my macbook pro? When I try to select a blue tooth device I get a message error "there was an error connecting to the device"

It connects over your wifi. If you would like to mirror the display open System Preferences > Display > and ensure that airplay mirroring is set to on. First generation Apple TV's do not work with airplay

I don't have a TV ,How connect my apple TV to my macbook pro to watch the programs?

Hi,
I want to use apple TV with macbook pro .do i have to buy any special connecting cable?BTW I don't have TV set.
Thank you

How connect my apple TV to my macbook pro to watch the programs?
You cannot do this.
I want to use apple TV with macbook pro .do i have to buy any special connecting cable?BTW I don't have TV set.
You need a TV.
The MacBook connects tot eh AppleTV wirelessly.
The AppleTV is to play iTunes content from your MacBook on a TV.
"Apple TV gives you access to the best 1080p HD content — including blockbuster movies, hit TV shows, live sports, your music, photos, videos, and more — right on your widescreen TV. You can even play content from your iOS device or Mac on your TV using AirPlay."

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

What model (year) MacBook Pro? Depending on the model, it may have DVI, mini DisplayPort, Thunderbolt, or HDMI video connectors.
What model (yeasr) and size (17", 20". 22" ...) display. Depending on the model, it may have ADC, singlre-link DVI, dual-link DVI, or Mini DisplayPort connectors.

How do i connect three external monitors to a macbook pro?

How do I connect three extrenal monitors to my Macbook Pro?

I have a USB to DVI adapter from kensington. I use to use it to power at 14" display.Moving windows around had some tearing and lag. Typing lagged, but it was use-able. It was fine for displaying diffrent stats. The OS treated it as it would any additional display.
But I found it undesirable for any thing tha requires lots dragging and clicking.
Every so often the device would lock up. At witch point the computer would get stuck trying to detect the USB display. I would have to unplug the adapter, cycle the power on the adapter. And then it would be good for a couple more months.
Also some times after a reboot, the adapter would stop working. I would have to unplug it, and login, and then plug it back in.
Coping file to my USB 2 harddrive seemed to cause more lag to the USB to Video Adapter.
About the idea of dasiy chaining 3 Thunderbolt display tgeother. Apple Thunderbolt Display (27-inch): Connection options for Thunderbolt Macs states the most the current MacBook Pro 15 & 17 inch can currently drive is 2 Apple Thunderbolt Displays.

I could not connect my canon MG5220 to my macbook pro version Mac OS X Lion 10.7.5.

i could not connect my canon MG5220 to my macbook pro version Mac OS X Lion 10.7.5. how could i connect wireless?

Contact Canon tech support or visit their support site for assistance as well as downloads of compatible drivers for Lion or later.
OS X Mavericks- Set up a printer
OS X- Printer and scanner software available for download

HT202731 Unstable operation when 2 or more USB devices connected to usb port on a MacBook Pro running Yosemite

I have tried connecting a number of devices to my MacBook Pro but I have found if I try to connect 2 or more using either usb ports or a usb hub the computer reports 'disk not ejected properly' and sometimes it will fail to recognise the device and remove it from the desktop or it stalls operation and I have to turn the computer off at the power button.
I have tried erasing the hard drive and reinstalling the operating system.
I have done various types of reset suggested by apple support.
The computer has been to an Apple dealer who has tested the hardware but found nothing due to the intermittent nature of the problem.
I have operated the computer with only the software originally installed on it present.
Could it be possible that a virus could be present on the usb devices I am trying to connect?
My computer is a MacBook Pro (13-inch, Mid 2012)
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Startup Disk Macintosh HD
Graphics Intel HD Graphics 4000 1024 MB
Operating System X Yosemite 10.10.1
Devices I have connected to USB ports all USB 3.0 compatible in a variety of combinations:-
7 port superspeed USB 3.0 hub (powered).
4 port Inateck USB 3.0 portable hub (not powered).
Buffalo ultra portable 500Gb USB 3.0 hard drive.
Seagate Expansion portable 500Gb USB 3.0 hard drive.
Seagate Expansion desktop 2Tb USB 3.0 hard drive (powered).
Seagate Expansion desktop 3Tb USB 3.0 hard drive (powered).
ScanDisk Cruiser Edge 16Gb USB stick.
ScanDisk Cruiser Edge 32Gb USB stick.
Hewlett Packard 16Gb USB stick. (This causes an instant crash now.)

Why?
- Because when I'm editing/ rendering lots of HD video everyday, I don't want to share system resources between virtual machines... I want the entire system's resources devoted to what I'm doing.
- I don't want to spend anymore money than I have to in order to buy one of the faster virtual systems. Not to mention, I've had a bad experience with Parralels in the past and I'd rather not use one again.
- I really don't want to clutter up my system anymore than I have to for a project that's only going to take a few weeks.
- I don't mind swapping hard drives... it takes two minutes, and I have an empty ssd just sitting on the shelf.
So, back to my original question. Can I just swap the computer's drives, then install Ubuntu on the second drive and be good to go without any harm to my MacBook Pro or OSX on the other drive (which wouldn't be connected when Ubuntu is running)?
Thanks.

HT5219 Can I connect my thunderbolt monitor to my MacBook Pro and iMac at the same time

I am wanting to connect my thunderbolt monitor to my MacBook Pro as a secondary monitor when running programs in windows 7 thru boot camp, and also have it connected to my iMac as a secondary monitor when working thru apps on my iMac. Is there a way to do this without having to connect and disconnect cables each time I want to switch.

I don't think it can be done without a KVM switch, & not sure they can handle that resolution.

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

When I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?

when I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?

Hi robfromkinglake west,
Try and isolate the issue. Check if it's only with this drive.
Check the drive with Disk Utility
Using Disk Utility to verify or repair disks
http://support.apple.com/kb/ht1782
I've never seen a drive take 20 minutes to mount.
Nubz

I have a problem today every time i connect a usb mouse on the macbook pro turns off.

I have a problem today every time i connect a usb mouse on the macbook pro the laptop turns off. What could i do to fix it?

Execute SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
If no success, try another mouse. It may be faulty.
Ciao.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Looking to connect konica bizhu c360 to my macbook pro

Similar Messages

Maybe you are looking for