Looking to download Oracle Ent Mgr for SPARC 64 10g

I am looking to download Oracle Enterprise Manager 10g for SPARC 64 bit. When on the OEM download page I only see it available for 32 bit SPARC. Where would I download this from OTN?

Here is some inforation from Metalink of the cerification. So it is certified, plus it will outline exactly what I am looking to download.
Certify - Additional Info Oracle Enterprise Manager 10g Grid Control Version
10.1.0.3 On Solaris Operating System
(SPARC)
Operating System: Solaris Operating System (SPARC) Version 9
Oracle Enterprise Manager 10g Grid Control Version 10.1.0.3
Oracle Database - Enterprise Edition V9 Version 9.2 64-bit
Status: Certified
Product Version Note:
None available for this product.
Certification Note:
9.2.0.4 required

Similar Messages

Oracle VM software for SPARC T4-4 server

Hi All,
I am looking for oracle vm software download for SPARC t4-4 sever.
I searced and found below reply....
Download Oracle VM Server for SPARC 2.2 software from My Oracle Support, search patch ID 14054041 (for Solaris 10);
Is this the right or latest software ( oracle VM) ??
if not can you please let me know where I can download oracle vm software for SPARC t4-4 server.
I am on solaris 10.
Thanks.

Yes, that is the latest version available.

Where is the Oracle VM Server for SPARC 3.2 SW download?

Where is the Oracle VM Server for SPARC 3.2 SW download?
Tips leading to a successful download of the correct SW may be rewarded with German beer.

Many thanks for your answer.
Can you point me toward something, which I can show our customer indicating when 3.2 will be GA for Solaris 10?

Unable to download oracle 9i R2 for Windows XP.

So that we may better diagnose DOWNLOAD problems, please provide the following information.
I am trying to download Oracle 9i R2 for Win 2000/XP since two days. After clicking on the file, the browser comes with an errormessage. I tried from several locations. The problem is same. Details given below.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
- download-east.oracle.com (also same with download.oracle.com)
- /otn/nt/oracle9i/9201/92010NT_Disk1.zip
- Trying since September 15 night.
- IE 6.0 sp1 (also tried on IE 5.5 sp1)
- Windows XP sp1 (also tried on Windows 2000)
- Error Message Pasted below.
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Click the Refresh button, or try again later.
Open the download-east.oracle.com home page, and then look for links to the information you want.
If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the download-east.oracle.com home page.
64 - Host not available
Internet Security and Acceleration Server
Technical Information (for support personnel)
Background:
The gateway has lost the connection with the Web site you are trying to access.
ISA Server: kencom54
Via:
URL: http://download-east.oracle.com/otn/nt/oracle9i/9201/92010NT_Disk1.zip
Time: 9/17/2002 5:28:00 PM GMT

If the platform is XP Prof. You have to stop the services before you de-install the modules. To complete clean up the Oracle installation, after you run the Oracle installer, you have to remove the key in Windows registery and then remove all the related directories.
The "getting started for windows" document has a detailed instruction of how to do this (from stopping oracle services to deleting directories). I tried it at least twice, it works.
Good luck.

Oracle VM Server for SPARC - network multipathing architecture question

This is a general architecture question about how to best setup network multipathing
I am reading the "Oracle VM Server for SPARC 2.2 Administration Guide" but I can't find what I am looking for.
From reading the document is appears it is possible to:
(a) Configure IPMP in the Service Domain (pg. 155)
- This protects against link level failure but won't protect against the failure of an entire Service LDOM?
(b) Configure IPMP in the Guest Domain (pg. 154)
- This will protect against Service LDOM failure but moves the complexity to the Guest Domain
- This means the there are two (2) VNICs in the guest though?
In AIX, "Shared Ethernet Adapter (SEA) Failover" it presents a single NIC to the guest but can tolerate failure of a single VIOS (~Service LDOM) as well as link level failure in each VIO Server.
https://www.ibm.com/developerworks/mydeveloperworks/blogs/aixpert/entry/shared_ethernet_adapter_sea_failover_with_load_balancing198?lang=en
Is there not a way to do something similar in Oracle VM Server for SPARC that provides the following:
(1) Two (2) Service Domains
(2) Network Redundancy within the Service Domain
(3) Service Domain Redundancy
(4) Simplify the Guest Domain (ie single virtual NIC) with no IPMP in the Guest
Virtual Disk Multipathing appears to work as one would expect (at least according the the documentation, pg. 120). I don't need to setup mpxio in the guest. So I'm not sure why I would need to setup IPMP in the guest.
Edited by: 905243 on Aug 23, 2012 1:27 PM

Hi,
there's link-based and probe-based IPMP. We use link-based IPMP (in the primary domain and in the guest LDOMs).
For the guest LDOMs you have to set the phys-state linkprop on the vnets if you want to use link-based IPMP:
ldm set-vnet linkprop=phys-state vnetX ldom-name
If you want to use IPMP with vsw interfaces in the primary domain, you have to set the phys-state linkprop in the vswitch:
ldm set-vswitch linkprop=phys-state net-dev=<phys_iface_e.g._igb0> <vswitch-name>
Bye,
Alexander.

Oracle VM Server for SPARC 2.2 Released

We are pleased to announce the availability of Oracle VM Server for SPARC 2.2 release. See the announcement at Oracle's Virtualization Blog - https://blogs.oracle.com/virtualization/entry/announcing_oracle_vm_server_for1 .
Please review the Oracle VM Server for SPARC 2.2 Documentation http://docs.oracle.com/cd/E35434_01/index.html for specific details of required and minimum software and supported platforms. Visit the download page http://www.oracle.com/technetwork/server-storage/vm/downloads/index.html for instructions to download the required software.
Edited by: Honglin Su on May 24, 2012 10:22 AM

S11 networking has "vanity naming" enabled by default (so things are named net0, net1, etc) - if you run 'dladm show-phys' you should be able to work out which one is from the vsw device.
Note: unlike on S10, with S11 you don't need to plumb the vsw in order to get connectivity between the guests and the control domain.
This might also help: https://blogs.oracle.com/raghuram/entry/ldoms_networking_in_solaris_11

Oracle VM Server for Sparc

I am going ahead with the Oracle VM server for Sparc in the next 6 weeks. Just one question I want to be sure of - do I put the OS of the base machine in the NetApp and NFS mount it or the base machine OS on local disk and all the LDOMs OS on NFS mounted on NetApp. I want to create a pool of two machines one with 2 T5-2 servers in it and another 4 T5-220 servers in it. My intention is to move LDOMS from one machine to the other within a pool, depending on the load.

Thanks Marcel. Sorry for the delayed reply as I was away. Yes, I did mean the control domain, but I also worried that NFS mount on NetApp may not work for LDOMs, as I read somewhere that Solaris does not support containers on NFS. I am a bit puzzled over here, as this means we may have to go for iSCSI route for all the VMs. iSCSI is untested in our Solaris environment, although heavily used on other things on NetApps. We also don't have any options but to use NetApps, as NetApps are being used in our two datacentres and it would be ideal for DR scenario.
Regards
Sujit

Oracle VM Server for SPARC 2.1 - cannot config vsw0 in Solaris 11

Any tips for getting it to work with Solaris 11? I tried following the steps outlined in Administering Oracle VM Server for SPARC 2.1, but it fails on the "ifconfig vsw0 plumb" command with:
ifconfig: cannot plumb vsw0: Object not found

S11 networking has "vanity naming" enabled by default (so things are named net0, net1, etc) - if you run 'dladm show-phys' you should be able to work out which one is from the vsw device.
Note: unlike on S10, with S11 you don't need to plumb the vsw in order to get connectivity between the guests and the control domain.
This might also help: https://blogs.oracle.com/raghuram/entry/ldoms_networking_in_solaris_11

Oracle VM Server for SPARC MIB for Solaris 11 Not available

Hi,
From the 2.1/2.2 Release Notes - The Oracle VM Server for SPARC MIB software is only available on Oracle Solaris 10 systems.
Anyone know when MIB software will be available on Solaris 11 ?
Thanks
Andy

We're on it (7082776 RFE: Need LDoms MIB support on S11), coming in next release.

Oracle VM Server for SPARC support san

hello all
Oracle VM Server for SPARC SANdoes not support it? a server pool does not support the use of san quorum，or storage Repository does not support of ocfs2 file system format？

Thanks Marcel. Sorry for the delayed reply as I was away. Yes, I did mean the control domain, but I also worried that NFS mount on NetApp may not work for LDOMs, as I read somewhere that Solaris does not support containers on NFS. I am a bit puzzled over here, as this means we may have to go for iSCSI route for all the VMs. iSCSI is untested in our Solaris environment, although heavily used on other things on NetApps. We also don't have any options but to use NetApps, as NetApps are being used in our two datacentres and it would be ideal for DR scenario.
Regards
Sujit

Oracle VM Server for SPARC Management Platforms

Upon doing some nominal research, I see that the Oracle VM for x86 platform is significantly more robust (at least at first glance) with regards to migrations/interface/etc. Where is the equivalent of Oracle VM Manager for SPARC? Is the Oracle Enterprise Manager with Virtualization Managment pack the tool that most people are using? Our virtualization offering, centers around the market share leader with regards to x86, at least at current. We would like to boost our product line with a similar service built on SPARC but it seems as if the product is too young to do that? I'm hoping that I'm wrong and just haven't found the right documentation. I'm also trying to get an appointment set up with the sales team to discuss.

It's true there does seem to be a wide gap in the UI aspect of Oracle VM for SPARC vs. Oracle VM x86. Personally I like the UI for the x86 platform better than the OEM 11g with Ops Center plugin for LDoms. However, I believe both UIs lack some robustness. In our case, we currently do not use a UI (for many reasons, mainly bugs and lack of certain CLI functionality). In the SPARC arena, it is extremely simple to script everything for the Oracle VM SPARC product (including HA scenarios). Once we build out the infrastructure, almost everything we do (provisioning, reporting, decommissioning) is done via simple perl scripting which is the power of not having a UI. However, a better UI for Oracle VM for SPARC is desirable for managing multiple environments/groupings, etc..

What all Operating System are Supported on Oracle VM Server for Sparc ?

hi,
Does Oracle VM Server for Sparc Support's Solaris OS of different version
or it also supports linux & windows OS also...
thnaks in advance....

The modern SPARC platform ( sun4v ) is locked in Solaris. No chances for open-source OS'es like Linux or *BSD.
This is because the important hardware documentation is closed ( known only to Sun / Oracle engineers ). For example:
  * virtualization features of CPU are documented only at hypervisor-call level (part of Sun servers' firmware), and only partially.
  * CPU errata are closed ( Some errata for old UltraSPARC III were opened during OpenSolaris project, but that's all).
  * crypto features ( SPU and MAU ) are closed.
-- Konstantin

Download Oracle 9i EE for 390/Linus

I am trying to download Oracle 9i EE for 390/Linus from OTN and I am getting a blank screen after click on it. I'm not able to use the CD's and would like to install using the downloaded files. Any ideas

I am trying to download Oracle 9i EE for 390/Linus from OTN and I am getting a blank screen after click on it. I'm not able to use the CD's and would like to install using the downloaded files. Any ideas

Need the link to download Oracle plug-in for Microsoft IIS

Hi,
I need the link to download Oracle plug-in for Microsoft IIS server.
Any help much appreciated.
Many Thanks
Nazeer Ahmad Syed.

If you kind find the link on OTN or in the CD pack, you might want to contact your Oracle Account Manager to see if you have a license or can get access to the CD on a trial basis.
Hi,
I need the link to download Oracle plug-in for Microsoft IIS server.
Any help much appreciated.
Many Thanks
Nazeer Ahmad Syed.

How to download oracle 9i AS for windows NT on OTN

I do not know how to download oracle 9i Application server , to help me please by giving me various stages
Message was edited by:
[email protected]

elcaro wrote:
hi all,
In my company there is a forms 6i server, now we want to move it to a new server for upgrade operations. for now we want to install forms 6i version on windows server 2003. on quick search I found it for xp but none for windows server 2003. if I try to install xp version I got "javai.dll is not valid" error.What is the complete error message?
how can I download it ? Company has license information also. what should I do ? for ex should I open a SR on metalink or something like that ?Did you try this file? -- http://download.oracle.com/otn/nt/forms/6i_rel2_xp.zip
You may log a SR if this does not work.
Thanks,
Hussein

Looking to download Oracle Ent Mgr for SPARC 64 10g

Similar Messages

Maybe you are looking for