Looking to find rear speakers & sub for system.
Hello,
I'm hoping someone could give me some suggestions for my problem. I've got a stereo receiver which I have connected to the line out of my sound card. I've also got an X-Fi Extreme Music sound card and I'd like to figure out how I could just add some rear speakers and a sub woofer to my system. I do not want to replace my front speakers which are connected directly to my receiver, but I'm looking for a speaker system that could act as rear surrounds and a sub. I'm thinking possibly one of the 2.1 speaker systems which I could connect directly to the rear out of my sound card. The next problem would be the length of the cables since they would have to be at least 20ft in length.
Might anyone have a suggestion on which system would fit my needs?
Thanks,
Jeff
Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK.
Similar Messages
-
Where can I find a camera case for my iPod touch 4g?
I have found many cases for the iPhone 4/4S that are camera cases but I don't have an iPhone. I'm looking to find a camera case for my iPod touch 4th generation.
I've found cases for the iPhone that have little 8x zoom lens and cases that can attach a DSLR lens to your iPhone. I'm trying to find one for my iPod touch but cant find any.
Yeah I've checked the apple store. Unless they just added it today I can't find one. -
Adjusting volume for rear speakers in a 5.1 surround sound system
Hi,
I have a basic Logitech X-540 5.1 sound system spakers. I am trying to point the rear speakers to where I'm sitting, but I cannot hear much from them except in certain songs or videos. I was wondering if there's any way that I can adjust the volume on the rear speakers so that I can hear them more?
Thanks in advance.Songs are stereo, so use the best upmixing method.
Notice the "1" for rear left & right - change that to e.g. 1.5, to be louder. -
I TUNES WON'T PLAY MY LIBRARY IN 5.1 SURROUND SOUND ON MY DELL 4600 COMPUTER. I HAVE ALTEC LANSING SPEAKERS THAT ARE WIRED THROUGH THE PORTS IN THE REAR OF COMPUTER. IT PLAYS ONLY FRONT SPEAKERS AND SUB WOLFER, BUT YOU TUBE VIDEOS PLAYS IN ALL 5 SPEAKERS. I HAVE A WINDOWS 7 OPERATING SYSTEM. I TUNES LIBRARY PLAYED CORRECTLY IN 5.1 SURROUND SOUND WITH WINDOWS XP ON THE SAME COMPUTER, BUT CHANGED WITH WINDOWS 7 OS. THE DRIVER SETTINGS ARE CORRECT AND SET TO 5.1 SURROUND SOUND AND WHEN GOING THROUGH SPEAKER TEST, ALL 5 SPEAKERS PING. iS THERE ANYTHING I CAN DO TO GET THE REAR SPEAKERS TO PLAY FROM MY I TUNES LIBRARY?
Hi mikefrompoland,
For more information about 5.1 Surround Sound in iTunes, you may find the following article helpful (it is primarily aimed at Mac users, but the settings in Windows should be similar):
Setting up iTunes and your DVD Player for digital surround sound
http://support.apple.com/kb/ht4072
Note: For surround sound to work, the content being played must be encoded to support it.
Regards,
- Brenden -
Very Little Sound in Side/Rear Speakers (7.1 speaker system)
I have WIN XP 32 bit, the Audigy 2 ZS soundcard, Creative 7700 7.1 7 piece speakers and the Creative sofrware installed.
I can hear sound in the side/rear speakers but it is quite faint and I can't see how to turn up the volume.
Any help would be great.
Jerry.I have the same problem and I just sent my sub woofer at a cost of an additional $30 shipping and just got it back to find the one I got back if not the same one LEFT REAR SPEAKER DOES NOT WORK. Before it made distorted noises, now it doesn't nothing. This seems to be a repeating partern I'm seeing here and of course no info in FAQ like popping crackling noise in XFI.... Same thing with the speakers. I love the Mods recommendation, its funny when you catch them giving advice for stuff you've tried without luck and you know lightning rarely strikes twice.... Or posts twice. I'll check back if I figure something out, hope if you find a fix you post it please.
-
How to find out the link for the tables for sub contract PO
Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK. -
My patience has been pushed to its limit with this iPod and I cannot find hours of operation for customer service and tech support and the phone system just tells you no one is available and call back during regular hours, but nothing saying what those hours are. Does anyone know?
Looking at the Apple's website and previous posts, Apple does not publish the hours. Did you can in the USA during the times that corresponsd to about 9AM to 4PM Pacific time?
-
Does anyone know where the iWeb data files are located or what they are called? I can't find them. I looked in Finder for files named the same as my website, but found nothing. Any help would be appreciated.
If you erased or replaced your hard drive since iWeb was cancelled, then they are gone. Otherwise, if you have maintained backups then check those.
Usually such files are in the /Home/Library/ folder or a sub-folder.
Exposing the /Home/Library/ Folder
Pick one of the following methods:
A. This method will make the folder visible permanently. Open the Terminal application in your Utilities folder and paste the following at the command prompt:
chflags nohidden ~/Library
Press RETURN.
B. Click on the Desktop, press the OPTION (⌥) button, select Library from the Finder's Go menu.
C. Select Go To Folder from the Finder's Go menu. Paste the following in the path field:
~/Library
Press the Go button. -
Looking for Macintosh Basics/Mouse Basics, probably for System 6, actually
On our old Mac SE, we had a program that would teach you how to use the mouse (Mouse Basics) and there were an assortment of other games. I'm specifically looking for the mazes. I seem to recall a penguin as being the mascot of these mazes.
This would be an older version of Macintosh Basics than the one available for download on MacintoshGarden (http://macintoshgarden.org/apps/mouse-practice), because there was no color. Also, the B&W graphics weren't nearly as "photo-realistic" (to use the term loosely).
I can't find any videos on YouTube or many mentions of this software anywhere... any ideas?
We still have the Mac SE and the floppies, but I would love to see this on my Mac OS X.When you say "probably for system 6" it sounds like you want to use them on the SE.
You then say "but I would love to see this on my Mac OS X." We have used an emulator for an Apple IIe on a G5. Have you looked at emulators?
Jim -
I'm looking for study material "ACI for System Engineers (ACISE)" 700-702
Hi there
It seems that Cisco is falling behind schedule.
Currently I'm looking for study material for the 700-702 certification "ACI for System Engineers (ACISE)".
Unfortunately the only thing I can find is an instructor lead "boot camp" in Bloomington, MN.
Since I'm not interested in brain dumps from pass4sure or similar sources, can anybody help me with any other resource - boot camp, book, online training?
Thank youHere is just a few. I hope it helps
Policy Driven Data Center with ACI, The: Architecture, Concepts, and Methodology
http://www.ciscopress.com/store/policy-driven-data-center-with-aci-architecture-concepts-9781587144905
Troubleshooting Cisco Application Centric Infrastructure
https://github.com/datacenter/aci-troubleshooting-book
https://aci-troubleshooting-book.readthedocs.org/en/latest/
The Operations Guide should be released this summer
http://www.virtualizationadmin.com/blogs/malhoit/news/cisco-sets-aci-release-date-july-31st.html
Operating Cisco Application Centric Infrastructure
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/Cisco_OperatingApplicationCentricInfrastructure.pdf
Where to go for Cisco ACI Information
http://adaptingit.com/where-to-go-for-cisco-aci-information/
Cisco Application Centric Infrastructure Fundamentals
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals.html
Cisco APIC Getting Started Guide
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/getting-started/b_APIC_Getting_Started_Guide.html
Cisco Application Policy Infrastructure Controller (APIC)
Configuration Examples and TechNotes
http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/products-configuration-examples-list.html -
I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!
Thanks for your help Karen Serena. Obviously, it appears in the list of printers and scaners on the left, into the "Print and Scan" with system preferencies. Then i click it , it appears on the right, then i click "open scanner" below the name and opens a window writing "open device failed". When i connect the scanner, it makes a sound but that's all...the scanner is dead, even if I push any button...Also there isn't any window opened to prove the function of the scanner, only is shown in the scanner list, that's all.
-
i am using a custom binding in the BTS Adapter with the following elements (similar to TransportWithMessageCredential with both the client and the server certs)
encoding (soap11)
https transport
Security : CertificateOverTransport
Problem: the request is sent successfully, but when i receive the response in BizTalk i get the following error
System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party. ,after turning on tracing in the WCF Trace the following error is present "Tokens of that type
cannot be accepted according to current security settings. "
Solutions tried
1) Changed the security to MutualCertificate , this time request also fails with the following error message The remote endpoint did not provide a domain name system (DNS) claim and therefore did not satisfied DNS identity 'xxxx.com'.
This may be caused by lack of DNS or CN name in the remote endpoint X.509 certificate's distinguished name.
Binding configuration
<behaviors>
<endpointBehaviors>
<behavior name="EndpointBehavior">
<clientCredentials>
<clientCertificate findValue="XXXXXXXXXXXXXXX" x509FindType="FindByThumbprint" />
<serviceCertificate>
<defaultCertificate findValue="XXXXXXXXXXXX" storeName="TrustedPeople" x509FindType="FindByThumbprint" />
<authentication certificateValidationMode="None" revocationMode="NoCheck" />
</serviceCertificate>
</clientCredentials>
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="ServiceBehavior" />
</serviceBehaviors>
</behaviors>
<bindings>
<customBinding>
<clear />
<binding name="XXXXXXXXX">
<textMessageEncoding messageVersion="Soap11" />
<security allowSerializedSigningTokenOnReply="true" authenticationMode="CertificateOverTransport" requireDerivedKeys="false" securityHeaderLayout="Lax" messageSecurityVersion="WSSecurity10WSTrust13WSSecureConversation13WSSecurityPolicy12BasicSecurityProfile10"
requireSecurityContextCancellation="false">
<secureConversationBootstrap />
</security>
<httpsTransport />
</binding>
</customBinding>
</bindings>
Thanks -MadhuPlease refer to the similar discussion:
http://social.msdn.microsoft.com/Forums/en-US/6a3d38ee-30ca-43fb-b906-6e95808df69d/cannot-find-a-token-authenticator-for-the-systemidentitymodeltokensx509securitytoken-token?forum=wcf -
Standard Transactions for looking at Customer list in 4.5 systems
Hi Friends,
I need your help on this issue.
Can anyone provide me the standard transaction for looking at Customer list for a company code and credit limit overview for customers.
Tables are KNKK AND KNB1Thanks buddy for the immediate reply but i want to make this question simple.
I am now trying to pull out is there any Standard transaction code which has been used for the table KNKK AND KNB1.
If so how to find that whether any tcode is associated to find the Customer list for both the tables
Thanks in advance
kishore -
CGEN-01079 SYSTEM ERROR: Module: Cannot find a content canvas for stacked c
hi i am new to designer
i am using designer 6 i
i am getting follwing error
CGEN-01079 SYSTEM ERROR: Module: Cannot find a content canvas for stacked canvas CG$PAGE_1
Please suggestFor the Stacked canvas there should be a content canvas mandatory in the forms.
you designed the canvas and changed the type as stacked. but there is at least one mandatory content canvas for the forms. -
I bought an iPhone 5. I was at work event and left cord in hotel. I've visited 2 apple stores and it looks very bleak. HUGE regret for being an early adopter. Consumer BEWARE. Apple was not prepared. These cords are impossible to find
I can not confirm this kind of experience.
Even here in Germany, where articles are sold after the U.S. market is supplied, I had no problem buying a Lightning cable yesterday.
There were about 20 to 30 cables available in the customer area alone, not to mention what they perhaps had in their storage.
So why not make a short trip to Munich, Bavaria, visit the Octoberfest and buy a Lightning cable.
What makes me much more angry is that I was told there is no dock planed for the iPhone 5.
Maybe you are looking for
-
Please to help rookie with quad core on P35 Neo 2 (MS-7345)
I bought a home built computer (specs below) for my sons almost a year ago and have had nothing but trouble with it. After I finally realized that the graphics card was over-heating it worked better for a bit after replacing Radeon 9600 with some cr
-
Regarding getting list of employees on probation
Hi Guru's i need your guidance i need to check the list of people who are still under probation, during hiring action infotype 0016 and 0019 are maintained.. i checked with report s_PH0_48000450 (Date Monitoring)...bowever from the list we are not ab
-
Hello Experts, I am facing a strange problem of automatic update of PO quantity. As soon as I press enter aftre entering the details in ME21N the PO qnatity changes. I cheked the inforecord for the combination of Vendor and material but there is no s
-
Log settings drop down disabled in SAP Maangement Cockpit
Hi All, I have deployed my Service Manager 4.2 application in the SAP Management Cockpit. While working we saw some fields are not coming from SAP to Syclo, hence we thought to enable the logs for the same . In SAP Management cockpit I found the drop
-
Hi All, I have new iphone 4s and want to import my contacts from my old Orange SIM (the contacts have all been copied to SIM). I enter the SIM and select "Import from SIM" in the settings --> Calendar, Contacts etc it looks like Ok but nothing copied