Looking to get the patch for OC4J MDB problem

I am looking to get the patch to fix the problem with oc4j 9.0.2.
The problem can be replicated very easly by forcing MDB to raise the EJBException or
calling setRollbackOnly() in the onMessage method. At this point the container should send a rollback
message to the provider. Intead its erroring out. Can I get a definite date when we will be able to
download the patch and if the 9.0.3 will fix this problem?
Regards,
Mark.A

Hi Mark,
I recall (I think it was on this forum) someone saying that the
9.0.3 production version of OC4J should be released by the end
of August, and that the problem you mention is fixed in that version.
I don't work for Oracle -- so don't quote me -- I'm just relaying
information I have picked up.
I get the impression that Oracle are not going to release a patch
before releasing the 9.0.3 production version.
Good Luck,
Avi.

Similar Messages

Where can I get the patch for Oracle JMS to work with RDBMS 9.2.0.1

Hi,
In the following extract from Oracle documentation the patch is mentioned that needs to be applied.
"You must apply a server-side patch for Oracle JMS, which ships with Oracle9iAS Release 2 (9.0.3) and the OTN release of OC4J, to work with an RDBMS 9.2.0.1 database. This patch is documented as bug 2513629; see the Metalink Web site or contact Oracle support for more information. However, it is strongly recommended that users move to RDBMS 9.2.0.2 when it is available. Users do not need to apply any server-side database patches when running with RDBMS 9.2.0.2."
Where I can get this patch?
Is it RDBMS patch or OC4J patch?
I don't have access to a Metalink.
Thanks a lot,
Andrei

Check out the configuration on the mapping. There you can create a data file. Do that and fill out the other parameters for the bad and discard file in that node.
Jean-Pierre

Can't get the patch/bank window for an external midi device to stay open

I am going to be very explicit with the description of my problem.
I am running Snow Leopard (10.6.1) and using Logic 9.0.1 on a MacBook Pro (2.16GHz, Intel Core 2 Duo, 4 GB memory).
I create a new empty project and add an external midi track.
I click on the track and select my Roland XV-5050, Channel 1 in the Library window.
I open the Environment window.
I choose MIDI Instr. from the pull down menu.
I select the XV-5050 icon.
I choose Define Custom Bank Messages under the Options menu.
I define all the Bank changes for my XV-5050 and close the Define Custom Bank Messages window.
I right-click on the XV-5050 icon in the Environment window and select Open Object Editor.
The patch/bank window opens and then immediately closes.
I can't get the patch window to stay open.
The same thing occurs when I double click on the midi track in the arrangment window.
Could someone let me know if they are able to get the patch/bank window to stay open or is it a bug?
Thanks
Scott

Scott,
Although this doesn't have much to do with your question, could you enlighten me as to how you connectd your XV-5050 to your mac with Snow Leopard? I can't get my Mac to "see" the XV at all.

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
          select add_months(date '2013-1-1',level-1) dt
            from dual
            connect by level <= 12
select dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

Is there a way to get the details for each hit in the portal database WCR_WEBCONTENTSTAT?

Hi,
I need to get the details for each user hit.
Apparently, this table has the IMPRESSIONS column which returns the total number of hitcounts and VISITS which counts the number of unique user who accesses the portal. What I am trying to look for is to get all the details per hitcount. I need to find out how many time a specific user accessed a specific page or iview.
I also used the table WCR_USERPAGEUSAGE, which I get the information of the users counted in the VISITS column in the first table.
I could not get the specific user per hit.
Please enlighten me if this is possible and how to do this?
Thanks!

Hi Catherine,
Why not use the portal activity report iView?
In the portal activity report iView the 3rd option allows you to choose a page for example and see
the user who accessed it and how many times.
Thanks and BR,
Saar

The new Update with the Patch for Camera Raw is not working. Code U44M1P34

Hi there,
i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
Error Code: U44M1P34
Photoshop CC (2014)
After Effects CC (2014)
Brisge CC
The logfile shows 1 fatal error:
FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
Are there others with the same Problem? Any ideas?
Thanks in advance and Greetings,
Joerg

Hi Jeff,
it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
Adobe PCD -> Adobe PCDold
backup -> backupold
caps -> capsold
Now the Programs are on the actual status with all updates included and everythings seems to be fine.

Have a macbook pro, looking at getting an iMac for home, can i share files easily i.e through a thunderbolt cable?

have a macbook pro, looking at getting an iMac for home, can i share files easily i.e through a thunderbolt cable? dont want to use dropbox as it will take too long, need direct access to my macbook via the imac

Assuming you have a wireless network at home, just use file sharing. System Preferences / Sharing. Choose a folder you want to share and you're done.

I am trying to get the artwork for an album. "Artwork Not Modifiable" appears in the artwork box and it doesn't let me drag artwork. What can I do to fix this?

I am trying to get the artwork for an album. "Artwork Not Modifiable" appears in the artwork box and it doesn't let me drag artwork. What can I do to fix this?

Words simply can't describe what a kludge iTunes has become. Every time Apple fixes one problem, a dozen more pop up. It's like trying to hold a bunch of ping-pong balls under water simultaneously.
The immediate problem is that Lion with iTunes buggers the artwork. Some it loses, some it can't find, and some appears and disappears like the Flying Dutchman (look it up...).
The bigger issue is that so MUCH of iTunes is bad, in general. Apple trys to use iTunes as a Swiss Army knife, using it to synch iPhones, iPads, etc. The app has become so generic that it is actually good at nothing.
The interfrace is kludgy; moving the library from one location to another virtually guarantees a wasted day and usually lost art, music, or backups.
In general, Apple's hardware and software is relatively ergonomically designed. I-Tunes, however just plain SUUUUUUUUUUUUCKS!

I would like to get the password for Marley 11 guest

Please can I get the password for Marley 11 guest

Hi Kit,
I understand your question now and I can point you to some usefull resources. First, you mentioned the three components, the chassis (which contains the FPGA), the ReamTime controller and the module. You also of course have your PC which is what the user will interface with to perhaps view the data on a graph. You will need to create a new FPGA project and you will have several key components in that project:
1) a VI on your FPGA target that is programmed to do I/O from your 9233 module. This VI must be created and then deployed and compiled onto the FPGA (this is like programming the chassis)
2) a VI on your RT controller that will use a DMA fifo to get the data from the FPGA. You may also have some signal processing or some other logic on this VI. This VI must be deployed to the RT controller
3) a VI on your host computer that will read data from the controller, probably save it to a disk and display it on a graph.
I would reccamend looking at a few resources to help you get started:
1) FPGA Design, Development and Programming Tutorial
2) Getting Started with the FPGA Module from the LabVIEW help files
3) LabVIEW FPGA Module On-Line Tutorial, this is a video tutorial that will be helpful
4) Use the LabVIEW example finder (in LabVIEW go to help»Find Examples) and under the "search tab" type in 9233. Open the 9233 getting started project that will populate in the list of available examples for the 9233. This project will serve as a starting point for your cRIO system programming.
I hope this helps. Thanks and have a great day.
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

I get the icon for "The song can't be located

I get the icon for "The song can’t be located; it may have been moved or delete" but it is there and if I play it it does play. However, it will not sync. I have thousands of songs in iTunes and this appears on many of them. Is there a quicker way of clearing the icon other than playing each track?

That icon does indeed mean that the file cannot be located (I just needed to confirm this, to avoid future confusion).
When you start iTunes, any external storage locations need to be ready to read and have the same drive letter associated with the drive as it did when you added the songs to your iTunes Library. If these conditions are not met, then iTunes will be unable to find the file.
In addition, if the file has been renamed, moved (but still on the same drive) or even deleted, by you, or any other programme, then once again, your iTunes will not be able to find the file, hence the exclamation mark.
I'm no experrt on NAS storage, but essentially, the file path to the song's file must remain constant. iTunes looks for the files as soon as it starts up.
If all your Librayr is external to the computer, you could try re-linking the whole Library to iTunes. Alternatively, I think it's going to be one at a time.

T61p Battery Problem - how can i get the warranty for my baterry?

- My brother bought a lenovo t61p in US and it is a my present but i live in Vietnam.
( Order date and time: 2CQTTE 04/30/08 19:15:30
Customer Number: 4290001
Order Number: 2CQTTE
Ship-To:
KIEN TRAN
321 74TH WAY N. )
- I have a problem with lenovo t61p baterry now, i just can use t61p in baterry mode < 1 hour.
( manufacture name: SONY
manufacture date: 2008-04-15
first used date: 2008-05
serial number: 4125
bar-Code number: 1ZET184F40X
fru-part number: 42T4566
cycle count: 47
- It is still under warranty. But can i get the warranty for battery in Vietnam? because Lenovo have a branch in Vietnam (http://www.lenovo.com/vn/en/) and the warranty center in Vietnam is in FPT company (big vietnamese company).
- Please show me how can i get the warranty for baterry in Vietnam?
Thanks
Message Edited by dracubi on 03-01-2009 01:18 PM

Well I assume that if the laptop is under warranty you should be able to get service for it. You can check the warranty status at http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=LOOK-WARNTY#sw That should tell you what the terms of your warranty are. If it is an international warranty you can get service at your local lenovo distributor. My t61 for example has a 3 year warranty that is valid in Turkey,. But also I have 1 year international, 2 years pan-Europeand and 3 year Turkish warranty. That was one ofthe stipulations in the contract when our thinkpads were purchased....

Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'

Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
I then uninstalled iTunes to try and reinstall it but I still get the same message for both 10.5 and previous versions, please help!

My situation:
- get error when updating iTunes from 1041 to 1050 or above: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
My system: XP SP3 with all latest updates.
Found out that the 1051 update fixes a major intrusion possibility during the update process, so I want to get iTunes upgraded to 1051.
Did more research and the following worked (not known if all steps outlined were necessary) (I do not guarantee success nor any more issues as a result):
- ran: MicrosoftFixit.ProgramInstallUninstall.exe (did JUST the patch option).
- ran: Windows Installation Removal Tool.exe (uninstalled JUST the iTunes program installer folder) (this does not remove the actual program).
- removed all apple software update registry entries.
- removed: C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\(JUST the software updatefolders) (hidden folder).
- removed: C:\Documents and Settings\current user\Local Settings\Application Data\Apple\(JUST the software update folders) (hidden folder).
- DID NOT need to restart
- downloaded latest iTunes update (1051)
- opened using WinRAR
- extracted all files
- ran JUST the apple software update MSI
- it succeeded
- ran JUST the iTunes MSI
- it succeeded
- normally I then uninstall the apple software update program, but DID NOT this time
- DID NOT need to restart
Hope it works for you.

What are all the patches for Sun C++ 5.8

Hi
Will you Let me know all the Patches for CC: Sun C++ 5.8 2005/10/13 on Solaris 5.8 Sparc
Please provide the URL
Regards
Revathi R

Initial releases of Studio are free, but patches require an Oracle support contract.
You can get information about patches and support at My Oracle Support (MOS):
http://support.oracle.com/

How do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

how do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

Did you look on the HP website?
Click the picture to go to the page.

How to get the values for checked and unchecked chekboxes

Hai i have using the checkbox in for loop.
I need the urgent help from anyone,
for example in the loop there is having 5 checkbox if i checked 3 of the ckeckboxes and 2 of the checkboxes are unchecked. I need to get the values for checked checkboxes and unchecked checkboxes. Because if i checked the checkboxes, those values need to be inserted into the database. Those for unchecked checkboxes values need to be deleted from the database. Can anyone help me for this
i am using the following jsp code for this. If anyone can know about this please post me the sample code.
<form name="confirmcontainer" id="confirmcontainer" method="post" action="submit.jsp">
<% for(int i=0;i<value.length;i++) {%>
<tr>
<td><input name="assigncontainer_chkbox" d="assigncontainer _chkbox" type="checkbox" value="<%=value[0]%>"></td>
<td class="bottomborder"><div align="center"><font size="2" face="Verdana, Arial, Helvetica, sans-serif"><%=value[1]%> </font></div></td>
<td bgcolor="#FFFFFF" class="bottomborder"><font size="2" face="Verdana, Arial, Helvetica, sans-serif"><%=value[2]%></font></td>
</tr>
<% } %>
<tr><td><input type="submit" name="submit" value="submit"> </td></tr>
</form>
Thanks & Regards,
Tamilvanan

Hey thanks Alex and Catastrophe for the quick response...
I'll be sitting with the functional team and reviewing the roles created.
Thanks for all the help once more
Regards,
Akash.

Looking to get the patch for OC4J MDB problem

Similar Messages

Maybe you are looking for