Looking to use two controlers

im not very environment savy so anyone with a minute to spare
would be greatly appreciated
i have a korgpadkontrol and a novation remote25
i would like to be able to use them both withn logicpro7
im just not sure how to go about it using the dreaded Environment
any takers?

i have a korgpadkontrol and a novation remote25
i would like to be able to use them both withn logicpro7
Spend a few moments browsing/searching this forum and you'll turn up all the info you need, using multiple controllers is a VFAQ.
Without you actually telling us what you want to do with them, in order to use them all you need to do is install them and turn them on. Both will send MIDI data to Logic in the usual way.
If you want to actually do something more complex than just send MIDI data, then you'll need to define what it is you wish to be able to do - many common scenarios have already been discussed at length in previous posts.

Similar Messages

Hi, I use two email addresses within one account with gmx. I created one account with the first email address now. How do I add the second one to this account? Now it looks like this. One account was opened with address A. I receive in this account email

Hi, I use two email addresses within one account with gmx.
I created one account with the first email address now. How do I add the second one to this account?
Now it looks like this.
One account was opened with address A.
I receive in this account emails for address A and B.
But I can only write and answer with address A.

Hi Rudegar,
Sorry for my late reply.
It s not the amount of accounts I'm struggling with.
When I create now for both email addresses one account, then I receive the same emails two times.
That is not what I want.
Because on gmx the two email addresses have the same inbox and outbox.
E.g. I can login to my gmx account either with email A or B. It doesn't matter.
Now I want to have the same on my ipad.
One account with both email addresses.

Installation of Adobe Reader XI using customization tool but looking to put two check marks

Hi guys,
Installation of Adobe Reader XI using customization tool but looking to put two check marks in the signature bottom two options
called Validating Signatures and Validating Certified Documents.
Can't find it in the customization tool and don't want to change this on 650 workstations.
If I could change a registry key or change it in the installation it would help alot.
Thanks for your help!!!
Chris

I am posting this reply AGAIN
My first reply was empty because i responded to the email I received saying this thread (is that the right terminology?) was updated. Obviously that email didn't get added, just a blank line....
Then I replied to this thread directly on Friday and that seems to have disappeared. Maybe I just don't know how to use a computer? Better sell the technology company I own LOL.
Ok so it seems the screen is normal, (not maximized). When I unlock and drop my start bar to one row, then the top of the screen pops down to inside my visible monitor space and it is not maximized. This allows me to drag it to another monitor and then maximize it there, then put my start bar back and relock it. This is the only way I can move the window, if I don't shrink my start bar, then I have zero access to the top bars of the document!
Currently I can not reproduce the problem ( I might have temporarily fixed it with my start bar reducing and then moving documents), so maybe it is permanently fixed....
Maybe a reboot will bring the problem back... It has been intermittent for about 6 months.

HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

HELLP!! NEED TO KNOW HOW TO USE TWO IPODS ON ONE COMP!ASAP

i have an ipod nano and an itunes account. Now my mom has a nano and we need to know if you can register them on the same account and how or any other tips for using two ipods on one comp!
PLEASE HELP ASAP!
ZACH

Hello Zach,
There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

SLI - Can I use two different video card versions for SLI?

Hello,
Can I use two different generations of MSI video cards that implement the same GPU for SLI?
The two video cards are:
MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2. The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on. I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore. The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
By the way, why are there so many versions (updates?) to this card? Have there been issues related to the card that necessitate a revision?
Thanks

Different coolers(HS and fans) and possibly different makers of vRAM. But, you should be able to run SLI without issues regardless of the versions.

Looking for a two-column CSS layout

I am looking for a two-column CSS layout that is centered
with blank space
on the sides, so the layout does not expand across the entire
screen, but
instead uses a portion of it (such as 75%). The left column
would be for
navigation and I haven't decided if I want it to be liquid or
fixed, but the
right column for content would be liquid. There would also be
a heading div
and navigation div across the top and a footer across the
bottom.
While looking for sample sites I keep finding ones that use
three columns,
and I'm worried that if I remove the third column that the
layout will break
at some point, even if I don't see it in my test browsers.
I'm also
discovering that some of the sample pages out there don't
respond well when
I resize the browser window. The columns don't have a minimum
width or they
stack on top of each other at some point.
There are so many different techniques to use when designing
a layout with
CSS, some better than others, that I thought maybe some
people here may
already know what's tried and true and what should be
avoided. Are any
layouts robust enough to allow a third column to be added at
a future date
if needed? I also like the idea of putting the content div
first in the
code, to improve search engine indexing and also to aid those
who may be
using a screen reader, but if that feature makes the coding
much more
complex then I could see why I might avoid it for now.

Sorry Nancy, I didn't see your post for some reason. At least
we agree (o:
Jo
"josie1one" <[email protected]> wrote in message
news:g4tv32$57f$[email protected]..
>I have DW8 and am very happy with this:
>
http://projectseven.com/products/templates/pagepacks/cssmagic/index.htm
>
>
> --
> Jo
>
>
> "Matt" <[email protected]> wrote in message
> news:g4tg96$isq$[email protected]..
>>I am looking for a two-column CSS layout that is
centered with blank space
>>on the sides, so the layout does not expand across
the entire screen, but
>>instead uses a portion of it (such as 75%). The left
column would be for
>>navigation and I haven't decided if I want it to be
liquid or fixed, but
>>the right column for content would be liquid. There
would also be a
>>heading div and navigation div across the top and a
footer across the
>>bottom.
>>
>> While looking for sample sites I keep finding ones
that use three
>> columns, and I'm worried that if I remove the third
column that the
>> layout will break at some point, even if I don't see
it in my test
>> browsers. I'm also discovering that some of the
sample pages out there
>> don't respond well when I resize the browser window.
The columns don't
>> have a minimum width or they stack on top of each
other at some point.
>>
>> There are so many different techniques to use when
designing a layout
>> with CSS, some better than others, that I thought
maybe some people here
>> may already know what's tried and true and what
should be avoided. Are
>> any layouts robust enough to allow a third column to
be added at a future
>> date if needed? I also like the idea of putting the
content div first in
>> the code, to improve search engine indexing and also
to aid those who may
>> be using a screen reader, but if that feature makes
the coding much more
>> complex then I could see why I might avoid it for
now.
>>
>
>

Using two displays with FCE

Hi
I wanted to see if anyone out there uses two screens when editing with FCE HD. I use a Powerbook g4, and wish to use the laptop screen for viewing editing timeline, maybe soudtrack or live type and a 2nd LCD screen to maybe see the output or toolboxes. For example, if you set up dual display mode in system prefs, and do a powerpoint show, the laptop screen shows something different (such as upcoming slides etc.) to what is output to a projector connected to the DVI port.
Is there something like this on FCE? Thanks
Abhi
PowerBook G4 Mac OS X (10.4.6)

I have now got FCE 3 and answered my own question. For any others who might be interested...if you have FCE and are looking to make use of more than one display, you have two options.
One is to use the OS's inbuilt multi-display options and have the different windows (timeline, viewer, canvas etc.) on different screens, making each one bigger. Or even have livetype open on one and FCE on the other. (Though G4s seem to struggle with this.)
However, a better solution (particularly if you have an HD capable display attached) is to use FCE's Video Out feature (Tools > Video Out). This outputs your canvas in full screen on the second display. It's great to work, and watch a huge full quality version of the final video at the same time.

Problem using two function based indexes at once!

Hello Oracle!
I've got problems using two function based indexes on geometries at once.
The problem occures, when I use a spatial join between two geometries both using function based indexes.
The test case:
CREATE TABLE quad (centroid NUMBER);
CREATE TABLE points (no NUMBER, point MDSYS.SDO_GEOMETRY);
CREATE OR REPLACE FUNCTION getQuad (centroid NUMBER) RETURN MDSYS.SDO_GEOMETRY DETERMINISTIC IS
BEGIN
RETURN MDSYS.SDO_GEOMETRY(2003, NULL, NULL, MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,1),MDSYS.SDO_ORDINATE_ARRAY(centroid-5,centroid-5,centroid+5,centroid-5,centroid+5,centroid+5,centroid-5,centroid+5,centroid-5,centroid-5));
END;
INSERT INTO USER_SDO_GEOM_METADATA VALUES('quad','tiedge.getQuad(centroid)',MDSYS.SDO_DIM_ARRAY(MDSYS.SDO_DIM_ELEMENT('X', -100, 100, .0000001), MDSYS.SDO_DIM_ELEMENT('Y', -100, 100, .0000001)),NULL);
CREATE INDEX quad_idx on quad(getQuad(centroid)) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
INSERT INTO quad VALUES (0);
INSERT INTO quad VALUES (5);
INSERT INTO quad VALUES (10);
INSERT INTO points VALUES (1, MDSYS.SDO_GEOMETRY(1001,NULL,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1,1),MDSYS.SDO_ORDINATE_ARRAY(4,4)));
ALTER SESSION SET QUERY_REWRITE_INTEGRITY=TRUSTED;
ALTER SESSION SET QUERY_REWRITE_ENA[i]Long postings are being truncated to ~1 kB at this time.

hi there,
For a better audience for this question, I'd look at the database forum.
guys on that will be a lot more familiar with FBIs
thanks
Barry

Trying to use Two Speakers IN Two Jacks on an X-Fi. Microphone Question As We

I just bought the X-Fi Fatalty Champion Series card, with the front dri've. Love the sound quality and the novelty of the front control set-up, but having a few major problems.
. I can't seem to connect my two powered speakers to two different jacks correctly.
I have two powered monitor speakers. Both have /4" outputs, so I'm using two /4" to /8" cables so they'll work with my card. However, I can't get them to work correctly in two separate jacks. They do produce sound, but not at the same levels, or as "Right Speaker and Left Speaker"
Example.
Left Speaker into Line Out
Right Speaker into Line Out 2
I can't get them to function as a stereo (Left Right) pair (which is very important to me). Yes, they both make sound, but the Left Speaker is extremely dominant. About 75% more dominant in fact.
How can I plug both my speakers to the card to get what I'm looking for.
2. I can't get the microphone jack (front or back) to record, or work correctly.
I can plug a mic in, and hear it in my own speakers (or headphones. I've tried both), however recording in Windows sound recorder, or using voice chats like Teamspeak... nothing. I can hear myself, but others can't. What do I need to do in order to use a microphone correctly with the sound card? What are the exact settings from Windows Start Menu to finish that I need to follow (if any)?
I'm very frustrated, and have given myself a few gray hairs over these matters today. I played around with settings and combinations for close to 2 hours today.
If anyone can help me, I'd be thrilled.
Thanks in advance
-Z

You are not supposed to connect a pair of speakers(as in left and right in a stereo pair)to two separate out jacks on the sound card.the place on the card where headphones/speakers with the mini jack goes is the right place.

Can I use two HP Pavillion 23bw monitors with my MBP with Retina Display?

Can I use two HP Pavillion 23bw monitors with my MBP with Retina Display with good video quality? I just purchased them and am already reading about issues with non-Apple External Monitors being used with MBP with Retina. Plus I just assumed it given the power of the video card, but I can turn off the display to my MBP and extend the two HP monitors correct? I do realize they won't have the picture quality of the retina display but I would hope they look reasonable with 1080p
New to the Support Community so thanks in advance for any help.

This is an update on the question about the use of the Dell P2415Q 4K monitor with MacBook Pro 13" and 15" w/ Nvidia graphics card installed. The monitor works very well with both systems and is automatically identified when connected. The 13" machine with Iris Graphics defaults to 2560 x 1440 at 60hz. This was very workable, matching the Apple Thunderbolt Display for resolution. I was not able to set the display for full 4K at 3840 x 2160, even at 30hz. Just not enough horsepower with the basic Intel CPU with Iris Graphics. But make no mistake, the setup works well and the screen looks great.
The 15" with Iris Pro Graphics and the Nvidia GeForce GT 575M discrete graphics card also recognized the display and drove it at full 4K, 3840 x 2160, 60hz with no problems. Running in clamshell mode required a bit of fine tuning with the Apple display settings. But nothing major.
Due to a relatively small workstation, I selected the 24" version of the Dell monitor. If you are looking for a relatively large monitor with near "retina" resolution, the P2415Q is a perfect pairing for the MacBook Pro - and a terrific bargain. I paid $530 on the Dell website.

Can I use two different HD's to backup my Mac?

I was thinking how to make my backups more resilient. At the moment I take one weekly backup from my Mac using Time Machine - I then store the TM hard-disk away somewhere safe. (BTW - the reason I don't leave the TM disk connected all the time and run continuous backups is that I figure if someone breaks into my house, they'll just take the Mac and the hard disk!).
I'm now thinking what happens if the TM hard disk fails and I can't restore from it? So I thought about maybe getting a second external hard disk, and alernating my backups each week to a different disk. As well as providing extra protection against a failure, I could also store the two backup disks in different places to add further resilience.
Would TIme Machine get confused however if I use two different disks to run backups from the same Mac?
Thanks for any advice...

Time Machine won't get confused if you use it to back up to alternating disks. You have to run a complete, full initial backup on each machine, of course. When you swap disks, use the Time Machine pref pane to "choose" the backup disk that's currently connected.
The "Preparing Backup" stage takes longer on the first backup after the swap - but it would do that if you had just not used the same drive for a week, too.
Of course, YOU might get confused with this setup if you're looking for an older version of an existing file and the specific one you want is on the "other" drive, but it sounds like you're just looking for a "restore in case of disaster" solution rather than using the versioning history Time Machine provides.
(Also - if the drive isn't big - physical dimensions, I mean - it might be easier to unplug it and shove it in a drawer if you think your Mac might be grabbed but the rest of the place not get ransacked.)

Can I use two iPod's (Mini and Touch) on one Laptop

I have an iPod Mini and now and iPod Touch, how can I use them both on my Laptop? My Mini has loads of music, podcasts and playlist, while my new Touch has nothing - is it possible to do? Pls help!

There are a few different ways to use two iPods with one computer, have a look at this help page for suggestions: How to use multiple iPods with one computer

Looking to use two controlers

Similar Messages

Maybe you are looking for