Looking Wm interview questions

Hi all,
Could any one plzz help me find WM interview questions....
Thank you,
bye....

http://www.sap-img.com/materials/interview-questions-on-sap-mm.htm
http://www.sap-img.com/materials/sap-material-management-interview-questions.htm
http://www.sap-img.com/materials/sap-mm-support-problem-solution.htm
Regards
Kalyan.

Similar Messages

Looking for interview questions

hi all,
i m looking interview questions can anyone plzz help me find it.
thanks ...

http://www.sap-img.com/materials/interview-questions-on-sap-mm.htm
http://www.sap-img.com/materials/sap-material-management-interview-questions.htm
http://www.sap-img.com/materials/sap-mm-support-problem-solution.htm
Regards
Kalyan.

Looking for Tuxedo interview questions

Hello All,
Can somebody suggest some good Tuxedo interview questions?
Thanks in advance for your time.
regards
Raj

Are you interviewing someone, or are you the one getting interviewed?
Are these questions for a programmer, administrator or both?
Scott Orshan
Raj wrote:
Hello All,
Can somebody suggest some good Tuxedo interview questions?
Thanks in advance for your time.
regards
Raj

Security interview questions - some fun to tickle your brain.

Hello gurus,
I know that posting interview question series are not allowed if the person has not put in any effort, but I have and folks seem to want to practice a bit sometimes so I take the liberty of creating a central one.
Tackle one or all of them to test your knowledge.
There are no model answers.
If you want to suggest additional ones, then please contact me.
The rules
Flaming of answers is allowed.
Funny answers earn a beer (or cup of tea).
There are no points.
1) When PFCG proposes 3 activities but you only want 2, how do you fix this?
2) What is the use of transaction PFUD at midnight?
3) Is PFUD needed when saving in SU01 and does the user need to logoff and on again after changes?
4) How are web services represented in authorizations of users who are not logged on?
5) How do you force a user to change their password and on which grounds would you do so?
6) What is the difference between SU24 and SU22? What is "orginal data" in SU22 context?
7) When an authorization check on S_BTCH_JOB fails, what happens?
8) Can you have more than one set of org-level values in one role?
9) Should RFC users have SAP_NEW and why?
10) What is an X-glueb command and where do you use it in SAP security?
11) What is the disadvantage of searching for AUTHORITY-CHECK statements in ABAP OO coding and how does SU53 deal with this?
12) In which tables can you make customizing settings for the security administration and name one example of such a setting which is usefull but not SAP default?
13) Can you use the information in SM20N to build roles and how?
14) If the system raises a message that authorizations are missing but you have SAP_ALL, what do you do?
15) Name any one security related SAP note and explain it's purpose or solution.
16) What are the two primary differences between a SAML token profile and a SAP logon ticket?
17) Where do you configure the local and global settings of the CUA and what are the consequences of inconsistent settings?
18) If you have users in different systems with different user ID's for the same person, what are your options to manage their authorizations centrally?
19) Explain the use of the TMSSUP* RFC destinations and the importance of the domain controller?
20) Why should you delete SAP_NEW profile and which transaction should you use before doing so?
To be continued...

I have one year experience in SAP Security and only two in Basis, so flame on......... I swear I didn't use google or any of my systems for reference! 
1) When PFCG proposes 3 activities but you only want 2, how do you fix this? Best answer is to modify your su24 data. 
2) What is the use of transaction PFUD at midnight? removes invalid profiles from user records 
3)Is PFUD needed when saving in SU01 and does the user need to logoff and on again after changes? PFUD is not needed and the user needs to log off and back on again 
4)How are web services represented in authorizations of users who are not logged on? ?? 
5)How do you force a user to change their password and on which grounds would you do so? SU01 -> Logon Data tab -> Deactivate password. I am not sure what grounds this would be necessary. I have never had to use it. 
6)What is the difference between SU24 and SU22? What is "orginal data" in SU22 context? SU22 you maintain authorization objects???? Su24 you maintain which authorization objects are checked in transactions and maintain the authorization proposals. 
7)When an authorization check on S_BTCH_JOB fails, what happens? "You do not have authorization to perform whatever operation you are trying to perform." message. HAHA 
8)Can you have more than one set of org-level values in one role? I might be misinterpreting this question. But yes. Depending on the transactions inserted into the role menu, you could have more than one org level to maintain. Purchasing Org and Plant, Sales Org and Sales Division..... 
9)Should RFC users have SAP_NEW and why? No. Just insert the transactions and necessary authorization objects into a role. S_RFC for one. 
10) What is an X-glueb command and where do you use it in SAP security? ??? 
11) What is the disadvantage of searching for AUTHORITY-CHECK statements in ABAP OO coding and how does SU53 deal with this? Disadvantage? I can think of an advantage. My ABAPer shows me his programs and we work out what authority checks should be performed. 
12) In which tables can you make customizing settings for the security administration and name one example of such a setting which is usefull but not SAP default? ??? 
13) Can you use the information in SM20N to build roles and how? You could, I guess. Not a good practice though. Build roles based on business processes. 
14) If the system raises a message that authorizations are missing but you have SAP_ALL, what do you do? Regenerate SAP_ALL which reconciles new authorization objects from SAP_NEW 
15) Name any one security related SAP note and explain it's purpose or solution. Don't know the number off hand, but I was looking at it yesterday. Program Z_DEL_AGR to allow deletion of more than one role at a time. There is no mechanism in SAP to achieve this currently. 
16) What are the two primary difference between a SAML token profile and a Logon ticket in SAP? ??? I know what these are but have no experience with it.

SGA Size for 8.1.7.4 32 bit? , some Interview Questions

Hi buddies,
I got some interview questions, might be simple for geeks in DBA. I am in need of answers. Could anyone help me.
Thanks,
Raaj
1) Does windows NT support direct I/O?
Answer: Choose one of the answers that apply
A: No, only AIO
B: Yes, depending on hardware.
C: Yes.
D: No.
2) Can you take a coldbackup from solaris and use it on windows NT?
Answer: Choose one of the answers that apply
A: Yes.
B: Yes if RMAN backup performed from NT server.
C: Yes, after running RMAN convert.
D: No.
3) All of the following will alter the number of checkpoints that occur in one hour on the database, except one. Which is it?
Answer: Choose one of the answers that apply
A: Decreasing tablespace size
B: Decreasing size of redo log members
C: Setting LOG_CHECKPOINT_INTERVAL greater than the size of the redo log file
D: Setting LOG_CHECKPOINT_TIMEOUT to zero
4) The DBA is attempting to back up the Oracle database control file. After
issuing the ALTER DATABASE BACKUP CONTROLFILE TO TRACE command, where can the DBA find the backup control file creation materials Oracle created for him or her ?
Answer: Choose one of the answers that apply
A: USER_DUMP_DEST
B: LOG_ARCHIVE_DEST
C: CORE_DUMP_DEST
D: BACKGROUND_DUMP_DEST
5) What is the most important action a DBA must perform after changing the database from NOARCHIVELOG TO ARCHIVELOG?
Answer: Choose one of the answers that apply
A: Shutdown normal and restart the database
B: Perform a full logical database backup
C: Perform a full offline database backup
D: Manually switch the log files
6) Which of the following choices lists an ALTER USER option that can be executed by the user herself or himself?
Answer: Choose one of the answers that apply
A: DEFAULT TABLESPACE
B: IDENTIFIED BY
C: TEMPORARY TABLESPACE
D: PROFILE
7) You need to view the initialization parameter settings for your Oracle
database. Which of the following choices does not identify a method
you can use to obtain values set for your initialization parameters?
Answer: Choose one of the answers that apply
A: Issue SELECT * FROM DBA_PARAMETERS; from SQL*Plus
B: Issue SELECT * FROM V$PARAMETER; from SQL*Plus
C: Issue SHOW PARAMETERS from Server Manager
D: Use OEM Instance Manager
8) As a result of a media failure, the current online redo log group is corrupted, the database crashes, as the current online group is inaccessible. Which type of incomplete recovery are you most likely to perform ?
Answer: Choose one of the answers that apply
A: Change-based
B: Time-based
C: Recovery using a backup control file
D: Cancel-based
9) User SNOW executes the following statement: SELECT * FROM EMP. This
statement executes successfully, and SNOW can see the output. Table
EMP is owned by user REED. What object would be required in order for
this scenario to happen ?
Answer: Choose one of the answers that apply
A: User SNOW would need the role to view table EMP.
B: User SNOW would need the privileges to view table EMP.
C: User SNOW would need a synonym for table EMP.
D: User SNOW would need the password for table EMP.
10) Which one of the following statements is true?
Answer: Choose one of the answers that apply
A: The request queue is common, and the response queue is different for all the dispatchers.
B: The request queue and response queue are different for all the dispatchers.
C: The request queue is different, and response queue is common for all the dispatchers.
D: The request queue and response queue are common for all the dispatchers.
11) What is the largest SGA size for 8.1.7.4 32 bit?
Answer: Choose one of the answers that apply
A: approximately 2GB
B: approximately 3.5GB
C: approximately 4GB
D: approximately 8GB
E: approximately 16GB
12) The DBA is about to perform some administrative tasks. Specifying the
OPTIMAL parameter has which of the following appropriate uses?
Answer: Choose one of the answers that apply
A: Limiting concurrent users
B: Limiting concurrent transactions
C: Limiting growth of rollback segments
D: Limiting growth of tables
13) If the DBA wants to find information about how often transactions are
wrapping transaction information between multiple rollback segment
extents, where would the DBA look to find that information?
Answer: Choose one of the answers that apply
A: DBA_ROLLBACK_SEGS
B: V$ROLLSTAT
C: V$ROLLNAME
D: DBA_SEGMENTS
14) You have 30 rollback segments in your database, for which
TRANSACTIONS_PER_ ROLLBACK_SEGMENT is set to 49 and
TRANSACTIONS is set to 1000. During periods of heavy usage, about how many rollback segments will be actively used by Oracle?
Answer: Choose one of the answers that apply
A: 50
B: 60
C: 20
D: 30
15) The DBA has a table created with the following statement:
CREATE TABLE EMPL
(EMPID NUMBER(10),
LASTNAME VARCHAR2(40),
RESUME LONG RAW);
The DBA attempts to issue the following statement:
ALTER TABLE EMPL
ADD ( PERF_APPRAISE LONG);
What happens?
Answer: Choose one of the answers that apply
A: The statement succeeds.
B: The statement succeeds, but column is added as VARCHAR2.
C: The statement fails.
D: The statement adds a disabled constraint.
16) The primary key of the EMP table has three columns, EMPID, LASTNAME,
and FIRSTNAME. You issue the following SELECT statement:
SELECT * FROM EMP WHERE LASTNAME = 'HARRIS' AND FIRSTNAME = 'BILLI'
AND EMPID = '5069493';
Where would you look to see if this query will use the index associated
with the primary key?
Answer: Choose one of the answers that apply
A: DBA_IND_COLUMNS
B: DBA_TAB_COLUMNS
C: DBA_INDEXES
D: DBA_CLU_COLUMNS
17) You are configuring your index to be stored in a tablespace. Which of the
following storage parameters are not appropriate for indexes?
Answer: Choose one of the answers that apply
A: OPTIMAL
B: INITIAL
C: PCTINCREASE
D: NEXT
18) You need to set up auditing in an order entry and product shipment
application so that when the ORDER_STATUS column in the ORDERS
table changes to SHIPPED, a record is placed in a special table associated
with a part of the application that gives sales representatives a daily list
of customers to call on a follow-up to make sure the customer is satisfied
with the order. Which of the following choices represents the best way
to perform this auditing?
Answer: Choose one of the answers that apply
A: Statement auditing
B: Object auditing
C: Audit by access
D: Value-based auditing
19) Information in the buffer cache is saved back to disk in each of the
following situations except one. In which situation does this not occur?
Answer: Choose one of the answers that apply
A: When a time-out occurs
B: When a log switch occurs
C: When the shared pool is flushed
D: When a checkpoint occurs
20) In order to allow remote administration of users and tablespaces on an Oracle database, which of the following types of files must exist in the database?
Answer: Choose one of the answers that apply
A: Password file
B: Initialization file
C: Datafile
D: Control file
E: Nothing, SYSDBA privileges are not required for these actions.
21) You are planning the storage requirements for your database. Which of the following is an effect of maintaining a high PCTFREE for a table?
Answer: Choose one of the answers that apply
A: Oracle will manage filling data blocks with new records more actively.
B: Oracle will manage filling data blocks with new records less actively.
C: Oracle will leave more space free in data blocks for existing records.
D: Oracle will leave less space free in data blocks for existing records.
22) You manage database access privileges with roles where possible.
You have granted the SELECT_MY_TABLE role to another role, called
EMP_DEVELOPER. To view information about other roles that may be
granted to EMP_DEVELOPER, which of the following dictionary views
are appropriate?
Answer: Choose one of the answers that apply
A: DBA_ROLE_PRIVS
B: DBA_TAB_PRIVS
C: USER_SYS_PRIVS
D: ROLE_ROLE_PRIVS
23) In order to set your SQL*Plus session so that your NLS_DATE_FORMAT
information is altered in a specific way every time you log into Oracle,
what method would be used?
Answer: Choose one of the answers that apply
A: Setting preferences in the appropriate menu option
B: Creating an appropriate LOGIN.SQL file
C: Issuing the ALTER USER statement
D: Issuing the ALTER TABLE statement
24) You create a sequence with the following statement:
CREATE SEQUENCE MY_SEQ
START WITH 394
INCREMENT BY 12
NOMINVALUE
NOMAXVALUE
NOCACHE
NOCYCLE;
Two users have already issued SQL statements to obtain NEXTVAL, and
four more have issued SQL statements to obtain CURRVAL. If you issue a
SQL statement to obtain the NEXTVAL, what will Oracle return?
Answer: Choose one of the answers that apply
A: 406
B: 418
C: 430
D: 442

1.-
2.c
3.a
4.a
5.c
6.b
7.a
8.d
9.b
10.a -
11.a
12.c
13.b
14.d
15.c
16.a -
17.a
18.d
19.c
20.a
21. -
22.d
23.b
24.?
hope it helps u.
Thanks
Kuljeet

Interview Questions Required.............Help???

I have done Oracle Database Administration Track and I need a job
for that purpose i want any one to send me the interview questions
I need any job and i have to prepare for the interview...................
Please help me...............
My e-mail address is
[email protected]
Thanks in advance.............

Most probably you have already gone trhough your job interview, but either way this goes for people who are trying to get acquainted with a job interview.
As an employeer I check the individual twice, once for the technical interview, the other for the profile interview.
On the first one, any thing can come to my mind. I request the prospect to present a 10 minute topic, with a 10 minute Q&A. Oracle DBA is wide, but I can immediately, from an open question, know if the prospect knows what he is talking about or not. On the profile interview it can be displayed if the prospect is looking for a job, just because this person is looking for the money or if this person is really committed with the dba tasks and the company's goals.
There are some other companies who hire dba's and at interview time there is an expert panel who will validate each produce syllable.
My personal advise is that any prospect be completely honest, there are several crossed questions aimed at discovering discrepancies and contradictions; proactively gain experience and be prepared to answer to whatever comes ahead, and finally not only request for a job but promptly offer solutions to the company's problems.
~ Madrid

Interview questions in process chain

hi
cany any one send me possible interview questions in process chain and errors with answer.
thanks in advance
pradeep

Hi Pradeep
1.Procedure for repeat delta?
You need to make the request status to Red in monitor screen and then delete it from ODS/Cube. Then when you open infopackage again, system will prompt you for repeat delta.
also.....
Goto RSA7->F2->Update Mode--->Delta Repetation
Delta repeation is done based on type of upload you are carrying on.
1. if you are loading masterdata then most of the time you will change the QM status to red and then repeat the delta for the repeat of delta. the delta is allowed only if you make the changes.
and some times you need to do the RnD if the repeat of delta is not allowed even after the qm status id made to red. here you have to change the QM status to red.
If this is not the case, the source system and therefore also the extractor, have not yet received any information regarding the last delta and you must set the request to GREEN in the monitor using a QM action.
The system then requests a delta again since the last delta request has not yet occurred for the extractor.
Afterwards, you must reset the old request that you previously set to GREEN to RED since it was incorrect and it would otherwise be requested as a data target by an ODS.
Caution: If the termianted request was a REPEAT request itself, always set this to RED so that the system tries to carry out a repeat again.
To determine whether a delta or a repeat are to be requested, the system ONLY uses the status of the monitor.
It is irrelevant whether the request is updated in a data target somewhere.
When activating requests in an ODS, the system checks delta repeat requests for completeness and the correct sequence.
Each green delta/repeat request in the monitor that came from the same DataSource/source system combination must be updated in the ODS before activation, which means that in this case, you must set them back to RED in the monitor using a QM action when using the solution described above.
If the source of the data is a DataMart, it is not just the DELTARNR field that is relevant (in the roosprmsc table in the system in which the source DataMart is, which is usually your BW system since it is a Myself extraction in this case), rather the status of the request tabstrip control is relevant as well.
Therefore, after the last delta request has terminated, go to the administration of your data source and check whether the DataMart indicator is set for the request that you wanted to update last.
If this is NOT the case, you must NOT request a repeat since the system would also retransfer the data of the last delta but one.
This means, you must NOT start a delta InfoPackage which then would request a repeat because the monitor is still RED. For information about how to correct this problem, refer to the following section.
For more information about this, see also Note 873401.
Proceed as follows:
Delete the rest of this request from ALL updated data targets, set the terminated request to GREEN IN THE MONITOR and request a new DELTA.
Only if the DataMart indicator is set does the system carry out a repeat correctly and transfers only this data again.
This means, that only in this case can you leave the monitor status as it is and restart the delta InfoPackage. Then this creates a repeat request
In addition, you can generally also reset the DATAMART indicator and then work using a delta request after you have set the incorrect request to GREEN in the monitor.
Simply start the delta InfoPackage after you have reset the DATAMART indicator AND after you have set the last request that was terminated to GREEN in the monitor.
After the delta request has been carried out successfully, remember to reset the old incorrect request to RED since otherwise the problems mentioned above will occur when you activate the data in a target ODS.
What is process chain and how you used it?
A) Process chains are tool available in BW for Automation of upload of master data and transaction data while taking care of dependency between each processes.
B) In one of our scenario we wanted to upload wholesale price infoobject which will have wholesale price for all the material. Then we wanted to load transaction data. While loading transaction data to populate wholesale price, there was a look up in the update rule on this InfoObject masterdata table. This dependency of first uploading masterdata and then uploading transaction data was done through the process chain.
What is process chain and how you used it?
A) We have used process chains to automate the delta loading process. Once you are finished with your design and testing you can automate the processes listed in RSPC. I have a real time example in the attachment.
for more detail
Collecting Process Chain Statistics
/thread/235805 [original link is broken]
Advice regarding process chains
creation of process chains
Message was edited by:
Kalpana M

SAP HCM Business analyst Support role Interview Questions and answers required..

Hello Experts,
I have applied for the role Business Analyst supporting SAP HR and GB Payroll. I need to prepare for the interview.
I would like to have any material or link with regards to issues/tickets raised for SAP HCM /payroll. my email ID [email protected]
Could you please provide me Interview Questions and answers for SAP HCM and Payoll support.
Thanks in Advance
Regards
Nivedita

we can not assume any interview questions .better you can search in google.if your in supporting then you should be able to rectivie the day tod day issues and the change request. for this you should have all modules experince to answer the interview questions. all the questions will be the real time and the process real time scenario kind of questions.
For the GB payrol,. look at all statutory deduction and payment like payee tax and the NI-(National insurenve) deduction. and also the returns (monthly anualy). and also the config of SSP (statutory sick pay )and SMP (Statutory Maternity Pay), factoring process , retro, posting and automatic file transfer to HMRC,etc.

SAP TM help , Resume, interview questions and market -appreciate your help

Hey Everybody,
Can any one of you send me the sample resume for Time management? Especially targeting the schemas. I just did HR311 at SAP school. Im looking for the opportunity now days.
Ill also appreciate if any one of you can tell that what kind of interview questions I could face? Sample question will be great.
BTW how is SAP time market?
Thanks,
UA
Email id : [email protected]

Did I ask something difficult? Ill appreciate if you guys shed some light on some scenarios. For example if you have Unions or worked with unions what you do in order to accommodate them. That would be great if you explain with the help of Business examples. What PCRs you have created etc...

Need Product Costing Interview Questions and Answers

Hi SAP Gurus,
I am looking for the product costing interview questions and answers or just questions which covers all the steps like
1. Product Cost planning, Cost Object controlling, WIP and settling in all the Scenarios (Make to Stock, Make to Order, Repetitive Manufacturing)
2. period end processing Scenario wise
3. Entries made by each step in each scenario.
I have already gone through help.sap.com--> Product Costing and some other forum links but I need with questions and answers which can make me to recall the process and understand the whole process scenario wise completely. Please share with me if you have any documentation.
Thanks.
Harter
Edited by: Harter21 on Jun 25, 2010 6:39 AM

Could some one help me?
Thanks,
-Harter

Please share UCS interview questions and answers

Please share UCS interview questions and answers

Since last 4+ year I am working on CISCO UCS, VMware Administration tasks on reputed company and even I have attended DCUCI 4.0 training on almost 4 year back.
Now I am looking for job change on UCS, VMware and VBLOCK Architecture position so if any related documents please share with me.

Interview Question for C# - other problmes

Hi,
I've recently found a good interview question and answer to it placed on that forum - writing a method
protected int GetSum(int from, int to)
At first glance too easy, after reading a good answer I've admitted that's a really good questions.
(https://social.msdn.microsoft.com/Forums/vstudio/en-US/6facee9e-cb42-4e8f-987a-081c68864a08/interview-question-for-c?forum=csharpgeneral )
I'm looking for more questions like this. Thanks for any suggestions.
Sylvia

It shows only that it is a fool who asks this. (the interviewer not the OP)
Nobody should create a function GetSum(int from, int to)
It is only hard to maintain, serves nothing beside that it shows the programmer who made is was paid per line of code.
Normally this is simply
var x = y+z;
Success
Cor

Interview question I faced

Hello all
I faced a recent interview question , that stumped me.
The case given to me was like this:-
today is 3 Jan
Production will start on 5 Jan for 100 items
Stock will be available on 8 Jan for 100 items
Customer asked for 100 items on 9 Jan
I was asked to go to MD04 , where I saw that on 8 Jan the stock was = 100 and on 9 Jan = -100 (from the open order of the customer), and hereafter stock was 0.
So all looks fine here in R/3. But then I was told that this order will never go through on 9 jan. and I had to trace and find out 'how do we see ' that this will never be achieved (as a hint to me,it had to do something with the stocks).
I went in MD04 through the details of the element screen but could not find 'why this will not be achieved'
Does anyone have an idea on this interview question ?

Hi,
Pl. check whether the child material stock is available for the production (as mentioned in the BOM of the material to be manufactured) on the date of starting production. (I presume that your statement of 'Stocks will be available on 08 Jan' relate to the finished material).
Hope this helps you.
Regards,
Prashant

Latest XI Interview questions ?

Hi XI Experts
   I am going to give interview this week end and i looking forward help from
   XI family on SDN for Latest Interview questions?
   As the source(Friends) these days XI interviews are little tough ..!!!
Awaiting for valuable responses
Thanx and regards
Rakesh Behera

Hi,
Going thru this will help you
/message/1209232#1209232 [original link is broken]
Maybe this is a good start:
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
1. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part I /people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
2. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II /people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
3. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III /people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
and once you are through ...follow the following links to weblogs which explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Regards
Agasthuri Doss

Hints on this Interview Question?

Hints on this Interview Question?
If after a failed BW interview, the interviewer hints to me, getting another 2 to 3 full implementations under your belt in a R/3 environment
1. What do you really think she is referring to? Since this was for a BW position, is she referring to the extraction stuff on the side of R/3 to pull data to BW?
2. Could she be referring to actually knowing R/3 say SD, MM, FI/CO, which has nothing to do with BW?
If so, any hints on getting another 2 to 3 full implementations under your belt in a R/3 environment in the absence of internship or job to gain this experience?
Any other way to pick this up?
3. By the way, are there any blueprints or documented full cycle implementations which I can read and test on an R/3 system, which I have access to?
Thanks.

Hi Caud,
obviously the interviewer was looking for "experience". No need for hinting at that.
This means that you have done things before hands-on rather than just read about it. The easiest starting point is the BI content. Take some application area you or prospective clients are most interested in and activate the content. Then start extracting data and following the data flow until you get the reports working and the data reconciles.
There are many books on SAP BW and all areas of R/3. But you can find many things online as well (help.sap.com).
There's also the best practices area that covers the full implementation cycle: http://help.sap.com/content/bestpractices/crossindustry/bestp_crossindustry_bi.htm
Happy learning,
Marc
SAP NetWeaver RIG

Looking Wm interview questions

Similar Messages

Maybe you are looking for