Looking4 Driver for VoIP USB Phone (C-Media CM109)

Hi
I've got a VoIP USB Phone for Skype (form SPC telecom). It brings a CM109 chipset. The case is that this phone only works in XP (SPC provides you only the driver for XP) although I was almost able to make it run in Linux-Ubuntu Hardy with some additional tools. I would like to use it in Mac however I do not have the drivers. I was looking for in the net but C-Media.com.tw web site is off (where it is supposed to be the driver for this common chipset)
Anyone has had the opportunity of using these sort of phones in Mac?
Any help will be highly appreciated
Juan

Sometimes it happens to me too... My advice: in Audio MIDI Setup Utility try checking and then unchecking the mute box in audio out section.
This should modify the core audio settings unfreezing the software and fixing your problem.
Hope this helps,
regards.
Mac mini Mac OS X (10.4.5) [email protected] 1GB ram

Similar Messages

Where can I find a driver for STLab USB 2.0 to VGA Adaptor for Macbook Air

Where can I find a driver for STLab, USB 2.0 to VGA Adaptor for Mcbook Air

Thank you for the response.
I downloaded it and it keeps telling me "No Scanner Detected." I looked on their website under supported scanners, found my Microtek ScanMaker 3600 and it says "NO" for Mac.
http://www.hamrick.com/vuescan/microtek_scanmaker_3600.html
I just sent an email to them asking if VueScan does support a my scanner. I hope it does. I have been searching but am not proficient or know enough of what to look for. I just don't want to have to buy another scanner.

HT4623 having trouble getting driver for my i phone 5 ?

having trouble getting DRIVER for my i phone 5

There's no driver for your iPhone 5.
Do you mean for your computer?

HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

Hey Stella,
Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189
All the best,
David

Windows 8.1 64-bit driver for infrared usb adapter

I'm looking for the correct 64-bit driver on my Windows 8.1 OS for my infrared usb adapter that I'm trying to hotsync
with my Palm m500. I already have the Palm Desktop software for the 8.1. I just need the correct driver for thr adapter.
Any help with this will be greatly appreciated. ,Thank you.

Hello, and Welcome to the HP Support Community!
I would suggest you try looking at the manufacturer's website for the dongle.
We have no idea what device you are asking about!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to build a Labview driver for a USB device?

I have purchased a USB Hall probe (a device that measures magnetic fields) and now I need to build a LabVIEW driver for it (the company that sells this device did not build drivers for it, to keep the price down I suppose). The USB device does come with an operating software, but what I need is to control the device using LabVIEW. I have some experience with LabVIEW, but none with building drivers. I don´t really know where to start, so any advice would be helpful.

To do USB in LabVIEW you'll want to get the NI-VISA driver. After you've got VISA, check out a few examples:
USB Instrument Control Tutorial
Six Things You Need to Know about USB Instrument Control
There are also examples built in to LabVIEW (under Help>>Find Examples to open the NI Example Finder, then under Hardware Input and Output>>VISA)
Tim W.
Applications Engineering
National Instruments
http://www.ni.com/support

[SOLVED] Driver for my USB Wireless LAN Adapter

I have a USB Wireless LAN Adapter for my desktop so I can share the network at home with others，but I found that I can only use my USB Wireless LAN Adapter in install environment. The driver for USB Wireless LAN Adapter just disappear after installation，the operating system could only identify the device but could not drive it.
Are there some packages not install for this problem or some configuration of the system is wrong?
thanks
Last edited by mihail (2012-07-10 01:42:06)

have you searched the forums? There are a bunch of threads on the ath9k module not working correctly with the latest kernel.
That's why it works in the live cd environment but stops working once you update and login to your actual installation.

[Eclipse ADT] Where can I find debug-driver for my smart phone?

Hello my friends,
I want to run and debug Android apps developed by the help of the Eclipse IDE on my smart phone (Huawei Ascend P6). The phones usb-debugging option is appointed and the phone is connected to my notebook by usb but Eclipse doesn't recognise it. I haven't got a correct connection.
On Windows there are appropriate drivers. Are there any driver on Arch Linux?
What can I do? Thanks for help!
Kind regards,
Lexis
Last edited by Lax Lexis (2014-07-16 12:12:32)

Hi there,
Did take a look at the AUR eclipse-android ?

Any 64 bit driver for Apple USB MA034 Modem Yet?

Uggghh.....Apple! Ugggghhhh Me!
So after being charged for months to use efax, I put a telephone call into my ISP to find that my office line also can handle faxing. This is great, all I need is a fax machine! A quick (really quick) google and i read that we could use an Apple USB MA034 Dial Up Modem to send and receive faxes. Phenomanal! This is why i love my Macs, just like the old WinFax. I scour ebay, find one, and paid $12 for a nice one, shipped.
I further look into how this is going to make my life easier, only to find that I am now screwed, as there isn't a 64 bit driver from Apple to support the modem. I did see people have talked to Apple and that their could be a driver out there, or one of our fine 3rd party friends may have wrote one? Id really like to use this thing instead of it being a 12$ paper weight.
Anybody find anything out there? I was really excited about this. Thanks in advance.

I'm looking for the same basic thing....
Does anyone use a Apple Cinema 23" Display with Vista 64 bit? I'm wondering what video card you use on your PC that supports the 23" Apple display.
I have a DVIator which worked great with XP, but now that my PC has vista, after the vista boot screen starts to appear, I get a black screen.
Thanks

How Do You Install The Driver For A USB-GPIB-HS?

I have a USB-GPIB-HS module. I'm trying to install it on a Dell Latitude E6510 laptop running Windows 7. I have LabVIEW 2011 installed on that computer along with the version of NI488.2 and NI MAX that came with LabVIEW 2011. During the process of debugging I've upgraded NI488.2 to the latest version from the NI website, v14.
The USB-GPIB-HS shows up in the Device manager in the Control Panel. It has a yellow exclamation mark (a "bang") next to in. It says that the device driver isn't working "This Device Cannot Start (Code 10)". If I "Troubleshoot" the device from the menu there it tries to download a newer driver, but it can't find one. The driver version is 14.0.0.49152. If I try to upgrade the driver in Device Manager it says that it's up-to-date.
In NI MAX the device shows up, but can't be used. It's name and serial number are given but the normal controls to use it don't appear.
I've heard that tinkering with the "GPIB Enumeration Service" can help, but I can't find where that service is.

The problem was that the USB-GPIB-HS modules I tried was physically broken. I tried another and everything worked.

Can not install driver for my USB E-MU interface sound card

I have iMac mid 2011

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam

Cisco USB Driver for Microsoft Windows 7 PC?

Hello All,
I want a USB Driver for the USB Console cable which came up with Cisco Router.
Note that this USB Console cable has both the sides USB ports ( 1 side of the port goes to USB Console Port of Router and other side goes to USB port of your Laptop)
I searched on cisco.com.
Found the below link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6880_x/hardware/installation/guide/b_c6880-X_hig/b_c6880-X_hig_appendix_01001.pdf
However, when I go to download link, it appears as "Page Not Found"
I want to try this option and connect my Laptop's HyperTerminal to Router's USB Console.
Does anyone know the USB driver for this?
Thanks
Chinar

Hi Chinar-
It looks like this will work with Windows 7.
http://software.cisco.com/download/release.html?mdfid=282867574&softwareid=282855122&release=3.1
DJ

USB-485 driver for Windows 7

Does there exist on the NI website a device-secific Windows 7 driver for the USB-485? I know I can download and install NI-Serial package (all 517 Mb of it) and get the driver for this thing, plus the drivers and libraries and help files tons of other stuff for dozens more devices that I'll never use, but I don't want to do that. I just want the Windows USB driver for this single device. Is it available?

That may be true but it would effectively eliminate the NI product from contention when someone was just looking for a simple 485 COM interface without any of the other extensive software baggage that the NI part drags in. In this case I guess something like the FTDI part with its 2Mb driver will be a more reasonable choice. I appreciate NI having hardware that supports their software and vice versa but I would think they'd also want their hardware to be usable (where conveniently possible) in generic software environments as well, just so they were not walking away from that market segment.

Missing driver for usb port

I received an alert to update my ipod software today which i accepted and i now no longer have a driver for my usb port

SAME THING HAPPENED TO ME AND ALL BECUASE I WAS HELPING MY HUSBAND WITH HIS NEWER VERSION OF THE NANO THAT HE GOT FOR CHRISTMAS, NOW I CANT USE MINE!!!

Looking4 Driver for VoIP USB Phone (C-Media CM109)

Similar Messages

Maybe you are looking for