Lookout 6.7 or 6.7.1 and VPN Connections

I am having difficulty after upgrading to Lookout 6.7 and 6.7.1 from 6.1 with a client process that is receiving its data from a Lookout server across a VPN. Two different VPNs have been tested and multiple computers running various versions of the client process. This is used for a water utility. Tank levels do not update, pump spinners do not spin, etc. If i start another process that is looking at the same server and then restart the initial process everything updates normally. I can then close the unnecessary process and the failing process continues to communicate until it is restarted. Ports across the VPN are wide open, no restritions, firewalls have been turned off. I did not have this problem until after I updated from version 6.1 to 6.7. I then updated to version 6.7.1 hoping the problem woud go away, but no joy. Also, if the computer running the client process is on the local network, there is no problem. This only occurs when connecting through a VPN tunnel. I have spent time building a new process and testing as the build goes along and I am seeing the same issue with very few components of the complete process. FYI, this is not a web client, this is the free client application running a client process file. Also, the state file for the process always shows the current time and date when the process was started. I have also tried starting the process by placing the source file in a separate folder and starting the process using the source file with the same result. Has anyone seen this issue?
Thanks,
Brad Adams
Communications Group Inc.
Nashville, TN
Phone: 615-889-4756
Email: [email protected]

Odd, may have been a permissions problem.
Forshock - Consult.Develop.Solve.

Similar Messages

Two active active ISPs with load balancing, publishing and VPN connection

Hi,
I wonder how to enable a scenario where i have to use two ISP's to share 30/70 load on our internet traffic, have to configure almost 60 internal websites already published using microsoft TMG firewall and connect client VPN connections and site-to-site vpn connections. I know that ASA firewall has limitation when using security contexts. Is good idea that how to achieve this gool?
I previously tried connecting four sites running ASA devices with this fifth site running Microsoft TMG firewall but i was able to connect only two ASA firewalls using site-to-site VPN, though I was able to connect remaining two as well but last two were not able to access ASA-TMG resources. furthermore behavious of two ASA-TMG connected sites was strange: sometime i was not able to access cross site resources from one machine but was able to do so from another machine.
I noticed that two of ASA sites connected with TMG site has different internal IP class (e.g site one 192.168.0.* and site two using 172.16.*.*) while remaining two have same class like the first site e.g 192.168.128.* and 192.168.100.*
Did anyone has experiance connecting TMG-ASA with multiple sites within same IP class scenario?
OR
How to enable same features using Cisco devices as they are on a single Microsoft TMG?
Best,
Saulat (Contact# 0092-321-4025587)

Sulat,
You can load balance between the two ISPs. That is not possible. But, we do have some options that I have discussed here:
Hope the above link gives you some ideas to utilize both your ISP links.
-Kureli

SMB and VPN connected to Windows Server 2003

I have search the web for an answer on this problem, I've only found peoble with same problem, but still no solution :o/
I wan't to connect to my office (windows2003) from my OSX 10.4.2 at home. I've set up an VPN connection and can PING the server (and others) on the network. Works fine.
When I connect to the server via SMB://server/ I get a list with all different folders (or servers) I can connect to but I get rejected with the answer Bad name or password. Now to the funny part; I can connect in the Terminal using smbclient with the same user and pwd just rejected in Finder!!!
I've read about this problem on http://www.macwindows.com/tiger.html#052305a but I can't find a solution. Someone mentioned a bug with apple number #4108992 - Can anyone tell me where I can read about that? Or better - Where I can find a solution. (I've tried to erase keychain)
Rgds
/Johan

My school sets up our network disk space with access via FTP. I don't know if that is an option through your company. While I have to download files to work with them and then upload them again to the network space to access them at work, it does allow me to look at the directory structure. I use an FTP client (not the one built into OS X). This might be an option for you to check on with your IT department. (This also eliminates my need to use VPN.)
Hope this helps.
PB G4 15" Mac OS X (10.4.3)

Airlink Raven X and VPN Connection

I am using the Raven X modem and the CiSCO VPN client on my laptop. I can connect to the VPN server at work but can not access any of the applications or servers.
I notices that traffice is leaving but nothing is return to the VPN client.
I can see the tunnel connection at work but no traffic.
Any help on this matter.
Thanks

The only experience I have had before is to change the MTU to 1400. I am using Checkpoint Point SecureRemote.
Hope this help.

Outlook 2010 sticks on "Trying to Connect" when undock Laptops and VPN Connects Automatically

When our users undock their laptops the VPN kicks in automatically. All of the other network services just continue seamlessly. Outlook, however, sticks at "trying to connect". This is often accompanied by a password prompt.
This is easily solved by closing Outlook and reopening it (no need to enter password).
It doesn't seem unreasonable that outlook should require a restart after being disconnected like this. Just want to establish whether there is a way to have Outlook just re-connect without the need to close it and reopen it. Or is the need to
restart it unavoidable?
Thanks.

When our users undock their laptops the VPN kicks in automatically. All of the other network services just continue seamlessly. Outlook, however, sticks at "trying to connect". This is often accompanied by a password prompt.
This is easily solved by closing Outlook and reopening it (no need to enter password).
It doesn't seem unreasonable that outlook should require a restart after being disconnected like this. Just want to establish whether there is a way to have Outlook just re-connect without the need to close it and reopen it. Or is the need to
restart it unavoidable?
Thanks.
This is really a question for the Outlook forum, but from what I have seen over the years, thats just the way it is with OUtlook and MAPI or Outlook Anywhere. When you change the network, Outlook struggles..
Having said that, MAPI over HTTP with Exchange 2013 SP1 is working to eliminate those issues:
http://technet.microsoft.com/en-us/library/dn635177(v=exchg.150).aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

New FIOS customer with dropped VOIP calls and Internet connection

I am a new FIOS customer. Got my 50/25 connection a week ago, switching from a TWC 6/1 connection. Ever since the new connection, I've had numerous issues.
My VOIP (Ooma) connection constantly drops and re-connects during conversations
I've had random Internet connection losses, which picks up again after a few minutes
My home alarm starts chirping every once in a while
I've contacted Verizon several times due to these problems and have received varying answers with no resolution of the problem.
The first time I spoke with support, the tech logged into my router and changed the WiFi channel saying that would fix the problem. It didn’t.
The second time I contacted them, the tech ran a bunch of diagnostics and said everything looked fine so it must be an IP address conflict with my devices, because I had a couple devices using static IP addresses. He said everythinf should be DHCP and the last two digits could not be higher than 99 (192.168.1.99). He said FIOS does not support 3-digit numbers at the end.
So I changed all my devices to DHCP and ran some online VOIP tests. It showed a packet loss of 2-5% and MOS score of 1 (which is bad). I was still getting dropped connections, so I disconnected all devices and connected just one computer to the router and tested again. I was still getting packet loss.
Then I called support a third time, this time the tech said there were no 2-digit IP restrictions and that he was detecting there was no UPS baterry backup for the ONT which was probably causing the problem, so he dispatched a field tech to my house.
Today the field tech came (same guy as before), he took one look at the box and said it was too close to my Electric meter and the RF from the meter was causing interference to the FIOS connection and resulting in dropped connection.
He moved the ONT to another location and said that should fix it.
Well, I'm still seeing packet loss and low MOS score when I run the VOIP test.
I don't know how much of what the techs are saying is true and how much is made up stuff.
Has anyone had similar issues and have thoughts on solutions or likely causes for dropped VOIP calls and connections? Could RF be causing this?
I thought going from a 6/1 Cable connection to a 50/25 FIOS connection would be awesome, but this has turned out to be a nightmare, and I may have to switch back to cable if the problem is not resolved.
I would appreciate any help.
Thanks!

Don't know where the packet loss is happening. I ran the VOIP test on myspeed.visualware.com and it shows a packet loss of 2-5% at different times and a MOS score of 1.
The report says MOS should be around 4 for good VOIP calls.
The Verizon tech who came to the house just blamed the electric meter box for RF interference and move the ONT farther away.
My concern is that I'm getting different answers from different techs at Verizon.
Regarding IP addresses. The Router shows a DHCP range from 192.162.1.2 to 192.168.1.254 as available for devices on the network. So, if I need to assign a static IP to a device should I use a number below 99 or above 151?
Thanks!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

What is the better way to open and close connection in bean

Hello, may i ask about the best way to open and close the connection?
At the first, the connection code is store in Conn class bean. The JSP page will call a method in Process bean to process the query and update of database. the Process bean is using th Conn to connect to database.
In my process bean, it have a method for each type of sql like select, insert, update, and delete for each tables. Each method will call the Conn to open and close the connection. The jsp page can simply call a method retrieve or update records.
However, when calling the processUpdate method, it is a method that update a group of tables base on the query result of another group of tables and calculation. If I calling the query method in the same bean file, it will open and close the connection many times (more than 1000 times). After open and close the connection several times, the connection to mySQL will be fail.
Currently, i include 2 method in Process that is only calling the Conn to open the connection and close connection. When calling the openConnection method, it will also set the boolean connected in the class to true and call Conn to open connection. When calling the closeConnection method, it will also set the boolean connected in the class to false and call Conn to close connection.
After that, i add some change to the query method which is when the connected is false, it will open the connection by calling the Conn and close the connection themself. If the connected is true, it will not call the Conn to open and close the connection because it already connected to the database.
Now, i when i calling the query method in jsp, it can open the connection and close the connection individually. When i call the processUpdate in the jsp, this method will calling the openConnection before calling the query and calling closeConnection at the end. It not only faster the process(less open and close), it also no cause the connect to mySQL fail error again. However, it also make the coding in the bean file more longer and complex.
Is there have any better solution?

Use connection pooling. This will put the connection management in the hands of the webserver, not your code. Check out this post:
http://forum.java.sun.com/thread.jspa?threadID=741788&messageID=4252932#4252932

Open discoverer report in new browser window and without connections page

Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advance

Closing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

I am using Windows 7 Pro, 64 bit on a brand new PC, and cannot connect to the iTunes store using iTunes version 10. HELP!!

Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?

You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

What is the diff.b/w UD connect and DB Connect

Hai,
can any one expalin diff.b/w UD connect and DB connect...
Regards

Hi Lakshmi,
please check the threads below
UD and DB Connect
DB connection,UD Connect Document
Also this
http://help.sap.com/saphelp_nw04s/helpdata/en/a6/c0e51914e842e19bda39dbbe4fe78c/frameset.htm
hope this helps!
Regards
Chandru

PHP and MySQL Connection problem

I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.

I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
>

Difference between connection pooling and simple connection

Anybody please tell me what is the Difference between connection pooling and simple connection and also where we define connection pooling and how.
Thanks
Please reply soon
amitindia

Creating and closing connection to the database is a relatively slow process. Equally connections use database resources so you can't just open as many as you want.
A connection pool maintains a number of open connections throughout the lifetime of the application. Instead of opening and closing the connections your application just "borrows" them from the pool when they're needed.
If the pool runs out of connections it will usually create new ones as needed until you reach some predefined upper limit.
A good connection pool will also manage connections which have failed for any reason, and report code which fails to return connections to the pool (ie connection leaks).
The number of connections created at startup is referred to as the "low water mark" and the maximum number that the pool will allow to be opened at any given time is the "high water mark". If no connections are available client code will generally block until one is released.
If by "defined" you mean where can you get a working implementation then your database or application server vendor is likely to provide one. Also the Apache Jakarta Commons includes [url http://jakarta.apache.org/commons/dbcp/]an implementation which you can use with any JDBC driver.
Dave.

Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data)

Dear all,
Can any one explain about this error,
2014-11-02 19:19:29.58   *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-11-02 19:19:29.58   *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-11-02 19:19:29.58   Deleting log backup file. File: '\\Jdccb-mis\logshipping\JDCCBPROD_20141030134512.trn', Last Write Time (UTC): '10/30/2014 1:45:13 PM'
2014-11-02 19:19:29.60   *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) *****
This errors comes on My Secondary server during log shipping and database goes to restore mode.
satish Kumar

Hi Krishnp,
These are the latest jobs in queue:
89 Quadro de Horários 28/6/2014 1:45 N/D Arquivar Configurações do Sistema Aguardando Processamento 0%
88 Quadro de Horários 28/6/2014 1:30 N/D Arquivar Modos de Exibição do Project Web App Aguardando Processamento 0%
87 Quadro de Horários 28/6/2014 1:00 N/D Arquivar Campos Personalizados Aguardando Processamento 0%
When I delete the last work automatically related are excluded.
Currently the queue is 406 jobs.
David Soares MCTS:MBS - MCTS - MCITP

Lookout 6.7 or 6.7.1 and VPN Connections

Similar Messages

Maybe you are looking for