Lookout (fieldpoint object) does not list any connection to fp aio 600 (outputs)

The fieldpoint object in lookout reports that all channels in FP AIO 600 are inputs.
To fix this go to "edit data member configuration" and select the "output" channels of the AIO 600 and change the "member" prefix to "AO". Save and you now have access (can connect to) the channels in "edit connections"

Hi Rahul,
this question does not seem to be related to SQL and PL/SQL forum.
I guess you could use {forum:id=64} or {forum:id=61} forums.
Regards.
Al

Similar Messages

My top and under folder does not list any images

Suddenly, my top and under folder does not list any images ?
For exemple : lightrom 0 /2013 0 /2013-05-11 126
LR5 ; I run windows 8 64bits
Thanks for your help.
Best regard
Regis

Library Menu, select "Show Photos in Subfolders".

Recovery Disc Creator does not list any discs for creation

Brand new NB200-10G (this a UK model). When I run TOSHIBA Recovery Disc Creator it does not show any discs for creation and the CREATE option is greyed out so I cannot create the discs. Now... when I first got it I did not have a USB DVD writer with me but I ran RDC out of curiosity to see the devices it might offer. At that time it DID list discs to be created but I cancelled out. I get the impression the program thinks it has created the discs and I believe I read somewhere that it will not create the discs more than once. I think it must have set a switch in the registry or .ini files somewhere to indicate that the discs have been created. If so does anyone know how to "undo" this? Drive D (data) and hidden partition *appear* to be intact.
If this is not possible then I guess I could try the "press key 0 at power up" method to restore to original install setting and this might then enable me to create the discs but I'm concerned that if the restore fails in a destructive way that I might be left without a working PC. TIA Ken
Solved!
Go to Solution.

OK all fixed!
Restore using key 0 at power up worked fine and cured the ToRDC problem. It then let me produce 2 copies of the restore DVD. Don't know what caused the problem... issue CLOSED.
Ken

When trying to statup with install disc inserted,all i get is an apple logo.when i try starting using command v it seems to see the cpu,but does not list any drivers.any thoughts appreciated!

when trying to startup with install disc inserted,all i get is an apple logo.when using command v keys,it seems to see the cpu, but doesn't list any drivers.any idea what,s wrong?

That is the wrong system disc, the Mid 2007 Mac Mini's originally came with Tiger 10.4. You must have been sent the wrong disc, because that gray 10.6 system disc is obviously for a later Mac.
Mac mini (Mid 2007) - Technical Specifications
At this point I'm afraid that your options are very limited.
1. Call Apple, have your serial # handy and ask for a replacement Tiger disc set. Problem is that it wouldn't be of much use, except for maybe running the Apple Hardware Test.
Apple - Support - iMac - Service FAQ
2. Purchase a Retail Snow Leopard Upgrade disc.
Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
As for the RAM, if 2GB is shown in both Apple / About This Mac and in the Activity Monitor then there is a pretty good chance that's it OK. Of course it is hard to test without the original disc set and in your case may need to be done with a third party RAM checker like Memtest OS X

Java does not list any sites in the site exception list, just an exclamation mark, so how do I add them?

I want to use an online drum machine ("monkey machine") that requires Java, so I installed Java, apparently correctly.
However, when I try to use the monkey machine drummer, it still demands Java, but Java's security mechanism won't allow me to add the monkey site (or any other site). All I get is an exclamation mark in the box where the list of site exceptions should be. This is in the control panel,under the security tab, after hitting "add" to add sites...
So.....
How to add in the sites?
Thanks!

¡Hola!
Does this http://java.com/en/download/exception_sitelist.jsp solve your question regarding Java?

My iTunes does not list any devices when I plug in my new iPhone to the computer. how do I get iTunes to recognize my new phone?

My old iPhone died, so I just got a new one. I am hooking it up to my computer for the first time. The iTunes on my computer doesn't show any devices as being hooked up to the computer when I plug in my iPhone. Yet my iPhone is charging so I know it is connected to the computer. Any suggestions on how to get my iTunes to recognize the new device? Thanks

Make sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem.

SQL Developer Quick Migration wizard does not list the connections

Hi,
I have downloaded SQL Developer 2.1 and installed it in a different folder with the option to import connection definitions from the previous version (1.5). However, when using [Quick Migration], the connections do not appear in the dropdown. Even if a new one is created...
Does anyone know if there is a workaround ?....
Thank you.

Hi Boris,
I see the confusion.
SQL Developer "Migration" features relate to non Oracle databases, like Sybase, Microsoft SQL Server, DB2, ...
So Quick Migrate allows you to choose a non Oracle database (connection) to migrate to Oracle.
Moving from Oracle 10g to Oracle 11g is really a Upgrade, although sometimes the word migration is used to confuse everyone :)
If you a upgrading an Oracle Application to Oracle 11g then there would be a specific process, check otn for this.
If you are upgrading your own Oracle database to Oracle 11g, then there are a number of ways.
http://download.oracle.com/docs/cd/B28359_01/server.111/b28300/toc.htm
http://kubilaykara.blogspot.com/2008/02/upgrade-oracle-10g-database-to-oracle.html
SQL Developer itself has a Database Copy and Database Export.
Have a read of the doc to see which one suits.
Regards,
Dermot.
SQL Developer Team

LR5 Import dialog does not list any images

Lightroom 5 is not seeing that a folder of images I'm trying to import has any images in it. The folder is question has well over 5,000 jpegs (it's my iPhone image depository). While I was able to import images from this folder with no problem in LR4, LR5 is telling me that there are no images in the folder. I've double checked that all my import settings are normal and the same as LR4 and it doens't matter. No matter what I do, I cannot get LR5 to see that there are any images in this folder to import.
Any thoughts?
Thanks,
Antonio
Here's an image of what's happening:
Message title was edited by: Brett N

"If the folder already exists in the Folder panel, select it and Choose Library > Synchronize Folder."
It doesn't exist in the Folder panel. It never has. It would mess up my workflow to have it as such. I only import from this folder.
Try (via finder) moving a few of the images in the folder to another folder that has been cataloged. Then synchronize that folder to see if the images show.
I did this and the images showed up fine, so there is nothing wrong with the image files.
Instead of invoking the Import Dialog first, drag an image from th Camera Roll folder onto the Library module or the Lr icon. That will bring up the import dialog. see if you get the same results.
Did this and it did not work.
Why this is strange is that I have no problem importing from the same folder in Lightroom 4. Something has changed here in LR5.
Here's another image of what is happening:
https://www.evernote.com/shard/s1/sh/e6199117-5f68-4a75-9faa-2f94220f8f18/2a633375d4c394fb 7e3ebd19c573eda4/deep/0/Screenshot%206/13/13%203:53%20PM.jpg

Why the LDAP server does not accept any connection upon the installation of iPlanet Application Server Enterprise Edition 6.0 Test Drive Phase II

"I am carrying my tests under W2000 with all the default installation options. I've checked the user ID (admin), password and port are correct. However, I was not able to start the Netscape Console and also, the kregedit exited with messages:
Could not connect to LDAP server on cr7260et017 port 389 as user cn=Directory Manager: Can't contact LDAP server
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[18/Jan/2002 13:56:48:3] error: ENGINE-context_init_failed: EngineClassSpace ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ..."
(previously submitted to Portal Services/Wireless)

Hi,
I'm not sure if there are known issues with iAS test drive and Windows 2000 howevere I would like to help you in cracking the error.
The GXBIND error appears only when the iAS is not able to communicate with the directory server. In our case, let us proceed by the following...
1. Check if the directory server is running. Verify this by checking the services and look for an entry for directory server and it must look something like
"Netscape Directory Server 4.1 (machine name)" and the status is started.
2. Next, if you are not able to start the console of directory server, then you must check if the directory administrative server is running. This is also verified with the services and look for the entry...
"Netscape Administration Server 4.2" and the status is started.
3. Next, if both of the above are running, then you need to login to directory server console by using cn=Directory Server and issuing the password. If you are able to login successfully then, iAS will work, if not, then rectify the problem with directory server and I'm sure iAS will work.
4. If you have forgotten the password for cn=Directory Manager, then there is a work around for fixing the password in directory server and iAS.
Please let the outcome once you have done this.
Regards
Raj

Download assisant does not list any products

I have installed the download assistant in order to get a trial of Acrobat XI. The download assistant installs, I sign in with a valid adobe id, but no products display. How do I get the trial software download? All of the directions I find tell me to use the download assistant, but it seems to be broken.
I have also tried this with anti-virus and firewall disabled as per the documentation. This seems ridiculous to require windows users to turn those off. It did not change the results.

Jscleigh please download Acrobat XI Professional from Download Acrobat products | Standard, Pro | XI, X. If you continue to face difficulties then please utilize a different web browser.

HP Pavilion Elite e9120y bios does not recognize any cd/dvd/bluray or hard disk drives

I erased my hard disk to install Windows 7. Now my computer intermittently does not recognize that there are any drives attached to the sata ports. I go into BIOS pressing F10 and it does not list any drives at all. I have a DVD burner and a bluray and a western digital 1TB hard drive connected. Sometimes they show that they are connected other times it doesn't. It's strange.
When it does recognize there are drives connected, I boot up from the Windows 7 DVD. Then I try to create a partition on the hard drive. The installation recognizes a 930GB hard drive with no partitions. Every time I try to create a partition, it says I need a driver for the hard drive. I have a driver that I downloaded off of HP's website yesterday, the driver for nvidia sata. I put it on my usb drive. It recognizes it but says it is the wrong driver. I don't know what else to do. I have built dozens of computer and repaired hundreds, but I have never run across a problem like this and I hope you can help me.

Thanks for your help, but that's exactly the driver I used. It didn't work.
My problem is not just with the hard drive. All three drives (two optical, one hard disk) should show up in bios, whether or not there is a disk in the optical drive or a partition on the hard drive. It intermittently stops detecting the drives. One time I boot and go into BIOS they are there, and I can run installation of Windows (partially). But if a turn off the computer and turn it back on, they've disappeared. Sometimes they will be detected, sometimes they won't.
I'm thinking the driver problem with the Windows 7 Professional x64 installation is somehow connected to the drives randomly not showing up. All drives stop showing up at the same time, not just the hard drive. So it's not a driver issue. It has to be connected to the BIOS and motherboard.
This computer is only 4 months out of warranty.
Any more help would be appreciated.

HT1721 computer does not respond when connect to HDMI TV monitor

macbook air does not reconize monitor from HDMI TV

help in troubleshooting Macbook to Sony HDMI... I HAVE had the miniport/ HDMI cable connection working - I just plugged it into both ports and it worked - i.e. No fussing with "settings". Now, after kids hooked up Wii game – computer to TV does not work…
My <system preferences> -> Display -> detect displays does not register any connection [alert: the arrangement tab of Display preferences is hidden because you only have a singe display attached to this computer].
Q? is it the computer that does not recognize hookup or is it the TV that does not recognize the hookup?
I have done all the standard go online for answers: reboot both, turn off both, connect cable, check input to HDMI, reset PRAM,
Still no success…
Your suggestions …??

MAX 5.0.0 does not see any NI software

I am upgrading a very old test system to a new motherboard. I am loading a hard drive from scratch since the old system used a PATA drive and the new system uses a SATA drive. Since this system has been in use for over a decade I also thought loading from scratch would be a good idea.
I load everything up in this order:
Windows XP (with updates to SP3)
MAX 5.0.0
NI-DAQmx 8.6.1
NI-VISA 5.0.3
Traditional NI-DAQ 7.4.4 (Legacy)
NI-488.2 v2.8.0
NI-845x 1.1.4
NI-XNET 1.1
NI-CAN 2.7
CANopen LabVIEW Library 1.1.3
When I am done MAX does not list any software. My hardware shows up fine. (PCI-6013, PCI-6025E, PCI-8512, PCI-GPIB)
Note: My system includes an 8 port serial card and while the ports do list under the MAX hardware section (COM3-COM10) it seems like my software can only access COM1 and COM2. If from within MAX I try "Tools" -> "NI-VISA" -> "VISA Options" nothing happens. I take this as a sign that not seeing software within MAX is at the root of my problem.
Also, the "Tools" -> "Reset Configuration Data" option is not there although it is supposed to be in MAX 5.0
As far as I can tell everything I am using is compatible. I don't have many other options since some of my software uses Traditional NI-DAQ.
What are my options?
Try something else to get MAX 5.0 working? Install MAX 5.1?

Good point - I should have mentioned that I did do that before installing any of the NI software.
BTW: Installing MAX 5.1 did fix the MAX not seeing software issue (still not sure why though) but did not help my COM port problem.
My programs that use COM1 or COM2 work fine but my programs that use COM3-COM10 do not. If I transmit data on COM3 within MAX using a test panel the data gets sent but when one of my programs sends on COM3 it does not. Really not sure what is going on.

ORA-12545: Connect failed because target host or object does not exist

Hey Guys,
I know this particular query has been pinging around for ages now, but i cannot seem to get a good answer from anywhere :)
Oracle 10g Database RAC installation- installed/ and running
Oracle 10g Client on different box.
Problem:
[user@myserver ~]$ sqlplus
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:14:11 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: user
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
All env variables are set in user .profile:
export ORACLE_HOME=/space/oracle/oracle/product/10.2.0/client_1
export ORACLE_SID=MSRAC
PATH=$PATH:$ORACLE_HOME/bin:$JAVA_HOME/bin
export PATH
Full contents of tnsnames.ora on client machine:
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
I am not sure if the first 3 connection entries are even needed in here, are they?
The last entry is the connect info for the live database.
What buggs me is that this works:
[user@myserver ~]$ sqlplus 'user/user@msrac'
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:19:40 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
With the Real Application Clusters option
SQL>quit
BTW: This is the error catpured in sqlnet.log
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1/bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=myserver.me.com)(USER=user))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 04-APR-2008 16:14:16
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
I have a funny feeling that the problem lies with either:
PROTOCOL=beq
and/or
ARGV0=oracleMSRAC
I have tried everything to remedy this, this is why i am now turning to you guys.
Any and all help is always greatly appreciated.
Robert

Hi Guys,
Thank you both for your responses, my findings are as follows:
1. HOST=X.X.COM, ensure host is reachable : PING works and host(s) are reachable.
2. In RAC Env, ensure TNS Name is correctly spelled, spelling fine, i can connect with the tns name (is TNS name same as SERVICE_NAME?) by: sqlplus 'user/user@racenv'; but my efforts still will not allow me to use:
sqlplus 'user/user' it tells me that the host or object is does not exist, does this refer to the actual physical machine or the service name, or the instance name?
All host entries in my tnsnames.ora file refer to the vip addresses of both servers holding the rac installation, and both are resolved just fine, testing with ping; any other way to test this?
tnsnames file contains CONNECTION strings in the following order (does the listener entry need to be in the file? on the machine that i am trying to connect from?):
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I tried removing all entries but the entry for MSRAC, but still no joy:
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
Thanks again,
Robert..
In the sqlnet.log file the error is as follows:
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1//bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=x.x.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 07-APR-2008 11:03:12
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
It mentions PROTOCOL=BEQ, this should be TCP, is there a way to enforce TCP or disable BEQ??
Rob
Message was edited by:
DobSun

ORA-12545: Connect failed because target host or object does not exist(EBS)

Hi All,
We are using Oracle EBS R12 on Linux x86 Enterprise Server.
We have installed vision database (both apps and db on same machine)
Host name: ERPDEV
IP:192.168.1.211
We can connect from client machines to our database using sqlplus i.e.
sqlplus apps/****@vision
Similarly tnsping is also successfully returning results.
Also following commands are returning results
ping erpdev
ping 192.168.1.211
ping erpdev.domainname.com
All above commands are running fine.
However we are trying to create new "Legal Address Entry" through "Legal Entry Manager". After filling all the details like Location,Country,City etc, when I push the apply button, getting following error messages:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1674 ORA-12545: Connect failed because target host or object does not exist in Package xle_legal_address_swi Procedure create_legal_address
I dont know why this ORA-12545 error is occuring through application although all of the above tests are running fine from client terminals.
Do any one have any solution for this???
Thanks
Farooq

Hi,
I really am new to this application.
I could not get this document.
Can you pls guide me, how can i fix this problem.
It's really imp to me to fix this.
--Satish

Lookout (fieldpoint object) does not list any connection to fp aio 600 (outputs)

Similar Messages

Maybe you are looking for