Lookout support for SQLSERVER 2005 Express

Any chance of you folks packaging the newest version to replace SQL's MSDE with your Lookout deployments?
Alternatively, can you define a workaround to get Lookout to work with the newest Microsoft SQL Server 2005 Express Edition (which replaces MSDE 2000a)?
I really wish you didn't use installers to install both Lookout and MSDE setup with mixed authentication mode!
Cheers,
Ed

Ed,
I am not aware of any plans to upgrade to MS SQL Server 2005 in Lookout
nor of a way for Lookout to use SQL Server 2005.  The Lookout
Release Notes explain how you can change SQL Servers to use Windows
Authentication mode rather than Mixed Mode.
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

Similar Messages

  • Airport Utility 6.0.0 breaks support for my Airport Express

    Computer updated to Airport Utility 6.0 but that breaks support for my Airport Express.  When I try to access the Airport Express it tells me I have to download Airport Utility 5.6 - but I can't find that anywhere on the Apple sites to download! 

    My catch-all list of Airport 6.0 & Firmware 7.6.1 problems:
    ~~~~~~~~~~~~~~
    I've compiled a catch-all list of problems and changes with Airport Utility version 6.0 and FW 7.6.1. Some of the items may be relevant to this thread.
    THE PROBLEMS WITH AIRPORT UTILITY 6 AND FIRMWARE 7.6.1:
    Introduction: If you find AirPort Utility v6.0 too limiting or strange, you can ALSO install AirPort Utility v5.6, released alongside v6.0, to maintain all your previous capabilities. It works fine with both Airport g and n devices.
    PLEASE NOTE: According to Apple you must FIRST install Airport Utility v6.0 in order to access and install Firmware upgrade 7.6.1. Do that first. THEN install Airport Utility v5.6 and use it instead if you prefer. HOWEVER: Another user has informed me that they were able to use Airport Utility v5.6 to install Firmware v7.6.1 without any problems! This would mean anyone can avoid Airport Utility 6.0 entirely if they chose.
    ~~~~~~~~~~~~~~~~~~~
    1) According to Apple's documentation, Airport Utility version 6.0 is ONLY for Mac OS X 10.7 Lion. It is NOT for 10.6 Snow Leopard. If you accidentally installed v6, you'll have to dig around in Apple - Support - Downloads for the previous relevant version for your devices and OS version. Here is the relevant page:
    http://support.apple.com/kb/DL1483
    2) The HELP for Airport Utility has been updated. When you first access it you may well be looking at the old Help. It is supposed to update itself spontaneously over the Internet. It took a couple minutes in my case. Be sure you are looking at the NEW Help before you start using it. One way to tell is that the list of help topics essentially doubles from what there used to be. Also, the very first topic in the NEW Help should read:
    "Set up an AirPort device > Set up a new AirPort Base Station or Time Capsule"
    3) The HELP has some WRONG information. Here we go:
    3a) There is NO "Enable Guest Network" setting. You CANNOT create a guest network or name it or give it any settings. Why this is still listed in Help, I have no idea. Why the setting is gone: This is most likely because the technology behind guest networks, WPS, has been thoroughly CRACKED in the wild. Google "WPS cracked" for lots of documentation of the situation. It won't be resolved soon.
    3b) I can't find any 'Setup Assistant". Everything is now manual. This is not to say that there isn't a setup assistant that appears when you FIRST set up your Airport device. I don't know.
    4) After installing Airport Utility v6.0, there is no indication of the accompanying firmware update until you decide to run the new version. Even then, you have to click on the big icon of your Airport device and notice an 'Update' button about halfway down the popup window. You then have to assume that this button is telling you to update your firmware.
    5) After you update your Airport device's firmware, you may well discover an ERROR subwindow popping up inside Airport Utility that says:
    "An error occurred while updating the firmware. -6721"
    Don't panic! All you need to do is go into your Wi-Fi settings, either in your menubar or the Network preferences, and turn OFF Wi-Fi, then turn ON Wi-Fi again. This is part of a long standing bug in Lion's Wi-Fi with which I bet you are already familiar, certainly up through Lion version 10.7.2.
    6) Miscellaneous changes in Airport Utility 6:
    6a) The keyboard command to manually change your Airport devices settings is GONE. You have to click the little 'Edit' button after clicking on the big icon for your device.
    6b) There is no longer any summary window for your Airport device. You have to instead click on the big "Internet" icon for related data, then click on the big icon for your Airport device for local settings data.
    6c) There is no longer any HELP advising users to EXPORT their settings. (The Help only talks about Import of settings). BE SURE TO EXPORT YOUR NEW SETTINGS! I did this immediately after both updates.
    6d) MAC address filtering for Airport devices is GONE.
    6e) All references to IPV6 anywhere are GONE. I have to assume the IPV6 settings are now entirely working and entirely automatic. Let's hope so.
    6f) Signal and Noise data and graphs are GONE. Use Apple's Wi-Fi Diagnostics app instead. Apple have hidden it here in Lion:
    /System/Library/CoreServices/W-Fi Diagnostics
    6g) In order to access the menu items in Airport Utility, you have to first click on the big icon for your Airport device.
    --> No doubt there are other changes, oddities or bugs related to these changes. But this is what I came up with during a cursory strafing of the software.

  • Migrate tables and stored proc from SQLServer 2005 Express to Oracle10G

    How to migrate tables and stored procedures from SQLServer 2005 Express to Oracle10G using SQLDeveloper? thank you very much

    Using Oracle SQL Developer Migration Workbench
    http://www.oracle.com/technology/tech/migration/workbench/index_sqldev_omwb.html

  • SQLSERVER 2005 EXPRESS & ATTACH MDF

    I installed SBO 2005A SP:01 PL:10
    My PC is a P4 2.8MHz, RAM 1,25GB, HD120GB.
    My SO is Windows XP sp2.
    Im running SqlServer express 2005 (9.0.3042)
    Installation was ok, setup created SBO-COMMON and Demo Company.
    I can also correctly create a new company database.
    Problem is that: I have some customer database I need to attach.
    Usually I enter in the Microsoft SQL Server Management Studio Express and I use the Attach option to attach MDF to SQL Server. SO, when I will enter in the SBO client, The company is automatically listed and I can choose it.
    THis appened in the old PC. In the new PC When I attach company, company is not listed in the SBO screen.
    In the Studio Express I can see the company attacched and I can query it, I correctly setup the right current server with the right session (INFOIXP03\SQLEXPRESS).
    Question is that: why after the attach I cannot list my company in the SBO list?
    Thank for your answers.

    In the .mdf file I permission was referred to the older system owner.
    I changed permission with "Full Controll" for everyone and now the company is correctly listed in the choose company window.

  • Support for SQLServer

    I know this is a dumb question, but I need to know for sure.
    Is it correct that Oracle Applications(financials, HR, etc) cannot be run on SQL Server?
    Thanks!

    Ed,
    I am not aware of any plans to upgrade to MS SQL Server 2005 in Lookout
    nor of a way for Lookout to use SQL Server 2005.  The Lookout
    Release Notes explain how you can change SQL Servers to use Windows
    Authentication mode rather than Mixed Mode.
    Doug M
    Applications Engineer
    National Instruments
    For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

  • Support for excel expression

    SSRS 2005 had support for putting in expressions in VB.Net which was maintained in the excel file exported from SSRS. This feature was taken out in SSRS 2008. Is this included in 2012?

    Hi Trigent,
    According to the documents below, I think the function is not included in SQL Server 2012 Reporting Services. Please see them:
    http://technet.microsoft.com/en-us/library/ms170438.aspx
    http://msdn.microsoft.com/en-us/library/ms157328(v=sql.110).aspx
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Setting up datasource for MS SQL SERVER 2005 Express

    Can anyone offer me a little help
    I have SQL 2005 Express Edition installed on the same machine
    as CF
    I've been into it and enabled TCP/IP and NAMED PIPES
    I've set TCP port to 1433
    I've created a login account called CF and enabled both SQL
    and Windows authentication
    I've created a database called coldfusionDB
    I've set windows firewall to make an exception for that port
    In CF Administrator I'm using the supplied Microsoft SQL
    driver. Can someone tell me what to put in the fields for the
    datasource ? I have the following:
    Port = 1433
    DATABASE = coldfusionDB
    SERVER = DESKTOP\SQLEXPRESS
    the Error I'm getting back from CF Administrator is:
    * Connection verification failed for data source:
    cfclientstore
    java.sql.SQLException: [Macromedia][SQLServer JDBC
    Driver][Macromedia][SQLServer JDBC Driver]The requested instance is
    either invalid or not running.
    The root cause was that: java.sql.SQLException:
    [Macromedia][SQLServer JDBC Driver][Macromedia][SQLServer JDBC
    Driver]The requested instance is either invalid or not running.

    Try:
    Server = localhost\sqlexpress
    Database = coldfusionDB
    Port = 1433
    Also verify that the SQL server service has started.
    These links may also help:
    http://www.adobe.com/go/kb400255
    http://www.mattwoodward.com/blog/index.cfm?event=showEntry&entryID=01930619-FD0A-4F02-31B1 BFC7D1D9A44C

  • How to pivot using pivot clause of sqlserver 2005 for three values

    Dear all
                Is it possible to formulate the query using pivote clause of sqlserver 2005.
    ( Table name is) BridgeHawra
    ReportDate,                 , Pole, DiameterCost,Flag,OuterDiaCost
    01 jan 2014,               ,1     ,   4.5      ,yes,6
    01 jan 2014,               ,2     ,   4.5        ,no,6
    01 jan 2014,               ,3    ,  5.5         ,no,6
    02 jan 2014,               ,4     ,  5.5        ,no,5.9
    02 jan 2014,               ,5     ,  5.5        ,no,6
    1)Pole Col will have unique value.
    o2)One pole will have one DiameterCost, but n number of DiameterCost can be there.
    I have to show a report which should show , count of poles and cost(DiameterCost* pole count of the day of each DiameterCost) for each date and DiameterCost.
    as following
    DateOfReport            ,  PoleCountofDiameterCost4.5, DiameterCost4.5, PoleCountOfDiameterCost5.5,DiameterCost5.5
    01 jan 2014              , 2                                      
          ,(2*4.5)                        ,1                                   
    ,(1*5.5)
    02 jan 2014              , 0/null                                      ,0/null
                              ,2                                
       ,(2*5.5)
    yours sincerely

    Yes it is possible though you need to use dynamic pivot technique. Dynamic pivot allow you to select/display column names dynamically.
    Below example does not use dynamic pivot,
    --create table #temp(ReportDate datetime,Pole int, DiameterCost decimal(5,2),Flag varchar(3),OuterDiaCost decimal(5,2))
    --insert into #temp values('01 jan 2014',1,4.5,'yes',6)
    --insert into #temp values('01 jan 2014',2,4.5,'no',6)
    --insert into #temp values('01 jan 2014',3,5.5,'no',6)
    --insert into #temp values('02 jan 2014',4,5.5,'no',5.9)
    --insert into #temp values('02 jan 2014',5,5.5,'no',6)
    ;with cte as (
    select ReportDate,
    DiameterCost * PoleCount as DiameterCost,
    PoleCount ,
    'PoleCountofDiameterCost'+cast(DiameterCost as varchar) column1,
    'DiameterCost'+cast(DiameterCost as varchar) column2
    from (
    select ReportDate,DiameterCost,Count(Pole) as PoleCount from #temp
    group by ReportDate,DiameterCost
    ) x
    ),cte1 as (
    select * from cte
    pivot( max(PoleCount) for column1 in ([PoleCountofDiameterCost4.50],[PoleCountofDiameterCost5.50])
    ) pvt
    pivot( max(DiameterCost) for column2 in ([DiameterCost4.50],[DiameterCost5.50])
    ) pvt1
    select ReportDate,
    Max([PoleCountofDiameterCost4.50]) [PoleCountofDiameterCost4.50],
    Max([DiameterCost4.50]) [DiameterCost4.50],
    Max([PoleCountofDiameterCost5.50]) [PoleCountofDiameterCost5.50],
    Max([DiameterCost5.50]) [DiameterCost5.50] from cte1
    group by ReportDate
    Regards, RSingh

  • How to use bind_variable for connectivity between Oracle and SQLServer 2005

    The code specified below could be used as an example of how to call a remote SQLServer 2005 procedure from Oracle.
    The problem I am facing is that I am not able to use the dbms_hs_passthrough.bind_variable without exceptions.
    Could someone help me out on this?
    declare
    CREATE PROCEDURE dbo.OrcaMessageTranslator
    @inp nvarchar(255),
    @outp nvarchar(255) output
    AS
    BEGIN
    select @outp = @inp+'output'
    END
    c integer;
    nr integer;
    inp varchar2(255);
    outp varchar2(255);
    sql_stmt varchar2(32767);
    begin
    dbms_output.put_line('call SQLServer procedure OrcaMessageTranslator');
    dbms_output.put_line('value of input variable inp is HowToReplaceThisValueByBindVariable ');
    sql_stmt := 'DECLARE @outp nvarchar(255)
    EXEC dbo.OrcaMessageTranslator
    @inp = N''HowToReplaceThisValueByBindVariable'',
    @outp = @outp OUTPUT
    SELECT @outp as N''@outp''';
    c := dbms_hs_passthrough.open_cursor@pp_preorca;
    dbms_hs_passthrough.parse@pp_preorca(c,sql_stmt);
    nr := dbms_hs_passthrough.fetch_row@pp_preorca(c);
    dbms_hs_passthrough.get_value@pp_preorca(c, 1, outp);
    dbms_hs_passthrough.close_cursor@pp_preorca(c);
    dbms_output.put_line('acquired value of output variable outp is '||outp);
    end;

    Hi,
    BIND_VARIABLE is useful when you have only IN variable but in your case you have IN and OUT.
    I don't know if you use the gateway for MS SQL SERVER or HSODBC/DG4ODBC but here how you can do to call a remote procedure with bind variables:
    DECLARE
    ret integer;
    inp varchar2(255);
    outp varchar2(255);
    BEGIN
    inp :='Hello World';
    outp :='';
    ret := "dbo"."in_out_proc_test"@tg4msql( inp, outp);
    dbms_output.put_line('Input value: ' ||v_ut1||' - Output value: '||v_ut2);
    END;
    The MS SQL Server procedure belongs to the user "dbo" and the database link
    being used is tg4msql.
    The following line initilaize the out variables of the procedure with an
    empty string:
    outp :=''
    I hope it helps you.
    Regards
    Mireille

  • This edition do not qualify for upgrade - SQL Express 2005

    Hello, 
    I hope somebody would be able to help me. 
    I am trying to upgrade an old Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)   Feb  9 2007 22:47:07   Copyright (c) 1988-2005 Microsoft Corporation  Express Edition. 
    This one is SP2 as listed on http://sqlserverbuilds.blogspot.co.uk/ and I am trying to upgrade it to SP4. 
    However I get the error This edition do not qualify for upgrade, could anybody help?
    Many thanks, 
    Mohan

    Hello Mohan,
    Which installer have you used, may be this one here
    Microsoft SQL Server 2005 Service Pack 4 RTM ? As you can see in the "Details" it applys only for the Commercial Editions, you can not use it for the free Express.
    For Express Edition you have to use this one:
    Microsoft SQL Server 2005 Express Edition Service Pack 4
    Olaf Helper
    [ Blog] [ Xing] [ MVP]
    Hi Olaf, 
    Thank you for the response. 
    The one you asked me to use is a full SQL Server 2005 Express Edition Service Pack 4. However I need something to be able to just upgrade from Service Pack 2 to Service Pack 4, could you help?
    Many thanks, 
    Mohan

  • I searsh support for crystal reports for VS 2005

    Post Author: wahid
    CA Forum: Crystal Reports
    Hello;
    I learn crystal rports for VS 2005, for do reporting but i can't, can you send me address web for crystal reports and programming code in crystal reports
    think you,

    Before dishing out good $$ for a phone support, have you posted your query in these forums? Have you used the search box in the top tight corner to see if there is a solution already documented?
    Just sayin...
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • [svn:fx-trunk] 9349: * Added support for using getStyle() in Mxml data binding expressions.

    Revision: 9349
    Author:   [email protected]
    Date:     2009-08-17 11:32:37 -0700 (Mon, 17 Aug 2009)
    Log Message:
    Added support for using getStyle() in Mxml data binding expressions.
      In addition to the existing "function return watcher" data binding
      functionality, we register to listen for style related change events
      when we see a function marked with [Bindable(style="true")].
      UIComponent's and TextGraphicElement's styleChanged() will now
      dispatch events for "getStyle()" FunctionReturnWatchers to handle.
      When null or "styleName" is passed into styleChanged(), we dispatch
      an "allStylesChanged" event.
    QE notes: mxunit test to follow
    Doc notes:
    Bugs: SDK-20394
    Reviewer: Glenn, Pete F, Peter D
    Tests run: checkintests, mxunit databinding
    Is noteworthy for integration: only if you want to start using it.
    Code-level description of changes:
      modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingExtension.java
        Modified generateWatcher() to do the AST equivalent of the
        WatcherSetupUtil.vm change.
      modules/compiler/src/java/flex2/compiler/as3/binding/FunctionReturnWatcher.java
        Removed unused isNew variable and added isStyleWatcher variable.
        Modified shouldWriteSelf() to return true if isStyleWatcher is true.
      modules/compiler/src/java/flex2/compiler/as3/binding/WatcherSetupUtil.vm
        Modified writeFunctionReturnWatcher macro to add a true arg to the
        FunctionReturnWatcher constructor call when isStyleWatcher() is
        true.
      modules/compiler/src/java/flex2/compiler/as3/binding/BindableFirstPassEvaluator.java
        Modified evaluate(Context, MetaDataNode) to skip reporting an
        error for no events when style is true.
      modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingFirstPassEvaluator.java
        Replaced insideCallExpression boolean with callExpressionStack
        Stack.  The "!insideCallExpression" checks were replaced with
        callExpressionStack.isEmpty().
        Modified addBindables() to handle [Bindable(style="true")].
        Made argumentListStack and resetSet more strongly typed.
      frameworks/projects/framework/src/mx/core/UIComponent.as
        Modified styleChanged() to dispatch a "Changed" and "allStylesChanged" from the previous
        parent and add listeners to the new parent when isStyle is true.
        Modified eventHandler to notifyListeners() when isStyle is true.
      frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicElement.as
        Similar changes to UIComponent.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-20394
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/binding/FunctionReturnWatcher.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/TextGraphicE lement.as
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/BindableFirstPassEval uator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingExtension. java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/DataBindingFirstPassE valuator.java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/FunctionReturnWatcher .java
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/WatcherSetupUtil.vm

  • I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

    I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

    This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
    To check and see if  that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
    Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
    You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

  • HT1998 How can I administer a Gen 1 Airport Express from Airport Utility 6.3.2 (OS 10.9). I can see the base station but get the message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more inform

    How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?

    Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
    You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC.

  • How can I add support for JPEG 2000 to Final Cut Express?

    How can I add support for JPEG 2000 to Final Cut Express 4? I need to export an .mov file in the JPEG2000 format but it is not available as a quicktime export option. Is this something that I can add via a quicktime .component? Would appreciate any insight anyone might have... Thank you.

    I believe you need to purchase the QuickTime Pro key ($29.99 USD).  Once you enter the registration number in System Preferences for QuickTime Player 7, it 'unlocks' several export features, including JPEG2000.
    See:
    http://support.apple.com/kb/SP521
    http://support.apple.com/kb/HT3820
    http://support.apple.com/kb/HT2240
    http://store.apple.com/us/product/D3380Z/A/quicktime-7-pro-for-mac-os-x?fnode=62
    -DH

Maybe you are looking for

  • Caller ID not working in Serbia

    I have a factory unlocked iPhone 4 which works with every sim card on every GSM carrier, but the caller ID is not working here in Serbia. I've got message in iTunes that it doesn't have settings for my carrier and now it doesn't recognize all names f

  • Has anyone had a problem with mail mbox files?

    In Mail for Mac - I was moving a few old 'sent' files to the trash, the programme then closed as I was doing so. When I reopened the Mail application. I couldn't see any Sent messages. The .mbox shows it has retained all it's content but it cannot be

  • Problem when switching over to a Logical Standby - RESOLVED

    I used GRID to create a logical standby. The primary and standby servers have the same OS's and are both 64-bit. I am using Oracle 10gR3 on both, and the same patches have been applied to both servers. Prior to doing the switchover, I queried switcho

  • Loading Actions in PSE 10

    I have been following the directions on the Florabella you tube page on how to load actions. Everytime I try to add a new cation however I lose the actions that I loaded. How do I keep my already loaded actions and add the new ones? Thanks yiu in adv

  • |Error SQL: ORA-14400: inserted partition key does not map to any partition

    I have an installation of ECC6 with BI7 in which consolidated through SEM-BCS OBCS_C10 with the cube, which I have version 100 for fiscal data, 101 data for IFRS and IFRS Copying a 301 version. The client will ask me the empty version of the 301 in t