Looks like 10.4.3 didn't fix the Rend:Error problem
Maybe it was a fool's hope, but I think I've tried everything to successfully send files to my colleagues who are still on Panther.
Oh well.
Well in my case I just plugged my computer directly into my cable modem because I did not really need wireless access for it. Of course, that is probably not a good solution for most people. If you are able to transfer files without your Airport, that probably means it is an Airport configuration issue. Maybe someone else in this forum has a better knowledge of how to fix that.
Similar Messages
-
The first 7 or 8 letters of a sentence are jumbled as I type. This happens only after a period of inactivity. Short or long. I start to type and a word like 'anybody', looks like this: 'ybodyan' I have done all the normal fixes. No luck. Ideas? Thx
It's in every text-input app I use in my normal day.....most frustrating as you have to do a doublecheck especially in documents which do not have any special spellcheck system. I've done the cleanmymac, maintenance, cocktail, PRAM reset, Font Cache Smash fixes.....and still I'm dogged by this. Its almost as though the motherboard or some interface system is 'sleeping' longer than it should (if there are any input areas of the MBP which rest during short periods of inactivity) and then the initial keystrokes on the keyboard are somehow not registered and only 'kick in' once half of a new word's characters are already on the screen........grrrrr.
-
MSI didn't fix the temperature issue for AMD 64 processors. I'm sure.
For people who didn't read my previous posts;
MSI claims in BIOS 1.4 (for the MSI K8N Neo Platinum) that they fixed the problem that the CPU gets (for example) 54 degrees idle and 74 degrees load.
They didn't. They just made up a fake solution.
Here are my arguments.
- When I start my computer, after a cold long night in which the computer was turned off, I see 42 degrees for my CPU in the BIOS. This is when I go DIRECTLY to the BIOS in the POST. 42 degrees? That is impossible. The temperature in my room is around 20. It can't get so high so fast. My Northbridge is 21. In the old BIOS 1.3 it was the same; when you started your computer the BIOS showed temperatures like 52 etc.
- When my computer has started Windows XP, I start Core Center. There I see my CPU temperature. It is 39 degrees for my CPU. Ridiculous. My old AMD XP 1800+ started with a minimum of 29 when Windows started. After that the 1800+ increased to 48 degrees.
But ok, when I use the trick which some people used in BIOS 1.3 to get true readings (restarting their computer with a soft boot), I see 34 degrees for my CPU. This reading is the only true reading. Isn't it weird that when I have my computer turned on for about 4 hours, with whole the time readings like 42 degrees idle, and I restart, I just get 34 degrees... WITHOUT fluctuating temperatures to hell and back...
My conclusion is that MSI just made something up like '74-20 = 54 degrees in load and 62-20 = 42 degrees idle'.
Also, the temperatures are fluctuating to hell and back. It goes from 58 degrees in load to 54 to 50... Whatever...
This board is great, but this problem really, really s u c k s. FIX this. We have the right of correct temperature readings. We spend money for it.
Regards,
MeQuote
Originally posted by Tiresmoke
I know you are frustrated but if you read the link I just supplied you will find this is a user to user forum and NO MSI techs are here at all.
Regardless, people are still encouraged to post their problems here as well. In case there is a solution or workaround (see Wannafly's response and mine as well regarding vcore).
Quote
We are users helping each other. If you must speak with an MSI tech you can always contact them from the MSI main page. Oh and it is not likely they will answer if you attack them the way you are writing in this forum. Now would I for that matter.
I do agree that some in this thread have crossed the line and need to watch it .
Quote
So play nice folks or there won't likely be a second warning.
Very good advice!
Quote
Yes there can stilkl be temp issues especially with the newcastle core CPU's. The new Bios is still a work in progress. There are a lot of combinations they need to work out. But if you contact MSI with a complaint in a cival manner and let them know what experience you have you may even get a new beta bios to try and see if it will solve your issues. Or they may have other suggestions. However they can't fix stuff they are not aware are broken and most of the problems disappeared when they released 1.4. So let them know about what you have.
Been there done that. They were responsive in the beginning. Continued to send them very polite and factual updates as I tried new BIOS updates but have long since ceased to receive any response at all. Again, I say I don't blame MSI. Just want a fix.....
Quote
Oh yes and running these chips in the 50C+ range at full load is still within reason.
I reread the thread a few times, and I don't see where anyone is claiming that they feel like that's a problem, so I'm confused about the relevance of this statement . The problem that's been mentioned here is that the temperature is being REPORTED at 50+C at IDLE load conditions when it obviously is NOT that hot. Restart of the machine immediately then shows an IDLE temp of 30C. Even though 30 seconds prior it showed 50C with just as low of a load since it was right after cold start? THIS situation is NOT within reason.... And it's very repeatable, cause I see it every single day -
Hi,
I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County). -
My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.
I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!
-
I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
I don't want to start again with rating my (beautiful classical) music!
Thanks, from Amsterdam, NLDid you do the move via Home Sharing, astro?
If so, perhaps try the instructions from the following post:
Re: i transfered itunes to my pc playlists did not go -
I downloadedall the Adobe Presenter, looks like everything downloaded but when I open the program I get the following message: The file archive part of Presenter is missing. You need all parts in the same folder
HI There,
It seems that Presenter is not fully downloaded. Please check you have downloaded .exe and .7z files successfully. In case you are still facing the issue then please click on the following link to chat with the support : Chat
with an Expert
Regards,
Mayank -
Is possible to have a script that makes a text randomly have caps and lower caps... i would love to create a kind of effect so it would look like manuscript - but it cannot be only the same letter in caps or lower caps - I wOuld NeEd oF SOmeTHing LikE This (random) - is it possibel?
Hi,
Sample with 2 regex:
Launching the 1rst regex:
Launching the 2nd regex: -
Listing order and dates of my photos have all changed and now it is a mess in my photo library! I tried to list them again by date, but it didn't fix the problem. What to do?
If your preferences keep getting messed up try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Happy Holidays -
Why u didn't fix the maps in iphone 5 yet ..? it can't locate me right i'm mahmoud from egypt
why u didn't fix the maps in iphone 5 yet ..? it can't locate me right i'm mahmoud from egypt
and it can't find places right tooSiri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County). -
Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop
screen look on
-
I'm a first timer on this (or any) help site. I just installed Time Capsule. The first backup looks like it will take two days at the present speed. Can I close MacBook Pro and have first back up continue, and can I unplug tomorrow and plug in at work without affecting the backup?
Hi Oneinspirit,
Time Machine backups can be paused by choosing "Stop Backing Up" from the Time Machine icon on the right hand side of your menu bar ( ). Once you're ready to resume the backup, you can choose "Back Up Now" from the same icon.
Start a backup: Click the Time Machine icon in the menu bar, then choose Back Up Now.
Pause a backup: Click the Time Machine icon in the menu bar, then choose Stop Backing Up.
OS X Yosemite: Start, pause, and resume a Time Machine backup
http://support.apple.com/kb/PH18851
All my best,
Allen -
When I use Firefox without menu bar I can see bookmarks. How ever when I activate menu bar the bookmark is missing from toolbar. I tried opening in safe mode and resetting toolbar but it didn't fix the issue. I am using version 7.0
Do you mean the Bookmarks Menu button on the Navigation Toolbar?
You only see that button if the menu bar is hidden. -
Personal hotspot has dissappeared from setting, I tried resetting my network setting but that didn't fix the problem
Have you tried to erase your drive and reinstall the OS - you should use recoery (hold Command + R keys while restarting). Since the items in the menu bar are part of the system, a clean reinstall of the system should take care of it.
As it is dangerous to post private information in a public forum, I will ask the hosts to remove it.
FWIW, we are all other users here - you are not addressing Apple. -
I uploaded 2 powerpoints with no problem, now it looks like it has uploaded to icloud but the icon is a page with a "P" on it. Any help please?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Exporting a table with a RAW column
Are there any issues in exporting a table that has one of the columns defined as a RAW(20) datatype. And after exporting to a dmp file, would there be any issues during import to another database? Thanks
-
I just recieved an assignment to find the maximum area of a rectangle when there are 100 feet of fencing availabe. You plan on using your neighbors fence for one side. The equations for the area, length, and width of the rectangle are listed below: A
-
What is Fios requirement to hire Tech Support / Customer Service?
Called Them on November 7 - to turn off my CAT5 WAN and turn on Coax WAN. response "I do not know how to do that - transfering you to customer service." Called Them on November 8 - to turn off my CAT5 WAN and turn on Coax WAN. response "I will have
-
Accessing Permanent variables in PI
Hi all, Seeburger has the ability to set variables in the UI and access these permanent variables accross mappings. Notes on how seeburger does it below. An example might be setting a phone number or tax id which may change at a later date and we'd w
-
Instant Client Installation help
Hello I'm relatively beginner. I'm having a win2k machine which i want to setup as a client to oracle 9i server which i'm able to telnet and work. What should i do??. I have downloaded (instant client basic + odbc) and set the path...install from the