Looks like aol server problem is fixed at last
finally getting email again on iphone
Well done.
I had a very similar problem which took them 6 months, and about 7 engineers, to trace to RF interference from next door, after whatever it was was switched off my connection has been 500k higher and totally stable.
And a small cheap transistor radio is ideal to trace RF interference.
I have to give full marks to the mods on this forum for perservering with my problem until it was solved.
Similar Messages
-
Looks like we get a software fix as early as Monday for reception problems
Looks like we will be getting some sort of software fix for the reception problems some of us are experiencing. It was hard for me to believe Apple could miss something like this. Check out the following link.
donald
http://www.appleinsider.com/articles/10/06/25/deathgrip_hysteria_may_end_monday_with_ios_401.htmlYou didn't see it because it was probably deleted. The Moderators are pretty quick to delete posts on these boards which violate the "Terms of Use" - which includes reporting on, or posting links to information on AT&T products/software not yet released and "officially" acknowledged.
-
Looks like a network problem but I don't think that's it.
Okay so a co-worker (my boss actually) got an Ipod shuffle for Christmas. When he plugs it into the PC he get's a message that the Ipod on F:\ needs to be formatted. we've followed the steps and formatted it several times but following the steps only removes the path to the music, But here where I think a lot of the problem comes in, F is actually a networked drive that contains the mydocuments folder where the music is located, but whenever we plug the Ipod in it thinks it's the F drive so we loose the networked path and can't access it until we unplug the Ipod.
I would think the fix for this would be to change the drive letter under the drive management but it's not showing up there or in my computer. Is there a setting in advanced somewhere to tell it to assign the Ipod a different letter drive or something like that? I haven't had any luck finding it. Or am I on the wrong path to fix it?
Thanks
RussThanks for the response. But as I said it wasn't showing up in the disk management. Anyway we did get it to show up in disk management after stopping and restarting the service (for some reason rebooting wasn't doing it for us though.)
Again Thanks again for the help. -
TOO many activations - looks like everyone has problem
My case number is
Case #0181489003
I've been waiting since March 13. Still waiting to get it reset.
If so many people are having this problem why isn't adobe trying to fix it? Is it b/c it is a free program?
ThanksAs a note to anybody submitting a support case for E_ACT_TOO_MANY_ACIVATIONS, provide both the AdobeID you are using the activate Digital Editions as well as the full and exact error message (with all the number/letters) and it will help get the problem resolved in a timely fashion.
Such as in this case, although she opened the case on 3/13, and it was responded to with a request for her AdobeID within two hours, to which she responded with the AdobeID on 3/15 (2 days later). The expected close rate after the correct information has been recieved is 3-5 days, and this has already been bumped up to the appropriate level and should be taken care of shortly, so I'm not going to jostle support's elbows on this one. -
It looks like a battery problem, but isn't
I have a 4G, purchased the end of 2004. I replaced the battery last year.
The battery appeared to go again, so I replaced it again. The battery looked half charged when I connected it, though it said fully charged when I used someone else's charger (mine, for some reason, stoppped working???) I charged it over night anyway -- the instructions say at least 3 hours.
Unfortunately, before I even used it, it is showing the same symptoms -- discharging rapidly after it's been fully charged. I disconnected the charger a couple of hours ago, and now the battery symbol says that it's almost totally discharged.
Ideas?what is that icon
It represents the mounted image.
what do I need to do with it?
You need to click on it. If there's an application inside, move that to the Applications folder. If there's a brown package icon inside, double-click it.
(54182) -
see above
I think for this hardware issue you will need to Contact HP.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Looks like a silly problem...
I don't know why but I get always 0 values when I am tring to print a1 and a2 in Calculate function.
every time I send a value into sample so I don't know why it keeps giving me 0 for a1 and a2 and c.
class A
long a1;
long a2;
long c;
void Calculate(long sample)
a1= (((long)(0.222))*a1) + (((long)(0.15))*sample);
a2= ((long)(1-0.25)*a2)+((long)0.25*(Math.abs(a1-sample)));
c = a1 + (4*a2);
A
a1 =0 ; a2 =4;
try this
class A
long a1;
long a2;
long a3;
public A()
a1 = 5;
Calculate(a1);
void Calculate(long sample)
a1= (((long)(0.222))*a1) + (((long)(0.15))*sample);
System.out.println( "a1 is: "+a1 );
a2= ((long)(1-0.25)*a2)+((long)0.25*(Math.abs(a1-sample)));
System.out.println( "a2 is: "+a2 );
c = a1 + (4*a2);
System.out.println( "c is: "+c );
} -
very slow in all sites I usually access, specially 1&1
Posting a url and lots more information has been known to help.
:Perhaps [https://wiki.mozilla.org/Releases Firefox 8 (Nov 8th)] will do better.
A couple of searches
# [https://www.google.com/search?num=100&hl=en&newwindow=1&q=site%3Akb.mozillazine.org+-intitle%3Atalk+-inurl:%22/index.php?title=%22+-inurl%3A%22%2Findex.php%3Ftitle%3D%22+running%20slow+-intitle:talk&btnG=Search running slow] (MozillaZine)
# [https://support.mozilla.com/en-US/search?a=2&q=running%20slow&is_solved=1&num_voted=0&num_votes=&asked_by=&answered_by=&q_tags=&created=0&created_date=&updated=0&updated_date=&sortby=0&a=1&w=2 running slow] (support questions) -
Display has low luminosity - looks like as burn backlight
Hello at all,
I have many days this problem with my laptop, I try to fix it but I can't.
Please guys help me to solve this problem with my laptop.
First of all, the problem is when I start my laptop, the laptop start and boot normally but the screen has low luminosity.
I think that looks like a clasical problem withn invert.
I change the invert in my laptop but the problem remains...
The next step which I try is the display, I change and the display from my laptop and I try it with new (and old invert) again the problem remains.
The third step which I try to do is to change the motherboard.
I change the motherboard and I try again but now with my old display because I send back the new display which I had bought from ebay. (new motherboard,new invert,old display--- the problem remains).
After all that tries, I try to change and the cable from the display but again I have the same problem.
My laptop begin normally, boot normally but the display has low luminosity.
In this point, I want to tell you that when I connect my laptop with external screen HDMI Monitor, it works great!
Do you something to suggest guys?
Please help me.
Thank you very much for your time...Hello @Gratsa ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, here is a link to resolving issues and check the display settings in the Notebook settings. This shows you how to calibrate your screen.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
What will Meeting Workspaces look like in SharePoint 2013?
We are looking to upgrade to SharePoint 2013, and are concerned about the Meeting Workspaces. I understand that they need to be operated in 2010 mode, how does this work? Do we need to switch from 2013 to 2010 and then back again, based on
what site/subsite we are on? What does this look like? How can we fix this, is there a way to change the existing meeting workspaces to team sites instead? Any help would be greatly appreciated.Hi,
Please refer to Discontinued features and modified functionality in Microsoft SharePoint 2013
and note, all Meeting Workspace site templates are no longer available as a site option:
http://office.microsoft.com/en-us/sharepoint-help/discontinued-features-and-modified-functionality-in-microsoft-sharepoint-2013-HA102892827.aspx#_Toc349821241
Since you are looking to upgrade to SharePoint 2013, we can also get some useful information from
Changes from SharePoint 2010 to SharePoint 2013:
http://technet.microsoft.com/en-us/library/ff607742.aspx
You can also learn from Update Office 2013 to run with SharePoint Workspace 2010:
http://office.microsoft.com/en-us/sharepoint-workspace/update-office-2013-to-run-with-sharepoint-workspace-2010-HA103449081.aspx
Regards.
Melon Chen
TechNet Community Support -
Looks like a simple query but need your help
Hello everyone,
I have a simple problem but I can't get over it. Actually, it looks like a simple problem, but I can't do it. So,it's probably not... Anyone can help me with this?
Imagine the following data:
ALTER SESSION SET NLS_DATE_FORMAT = 'DD/MM/YYYY HH24:MI:SS';
SELECT TRUNC(SYSDATE) - TO_DATE('01/01/11', 'DD/MM/RR') FROM dual; -- 564
DROP TABLE runs;
CREATE TABLE runs
start_date DATE,
end_date DATE
-- generate some random data
INSERT INTO runs(start_date)
SELECT TO_DATE('01/01/11', 'DD/MM/RR') + trunc(dbms_random.value(0,564))
FROM dual
CONNECT BY LEVEL <= 10000;
-- still generating sample data
UPDATE runs
SET end_date = start_date + dbms_random.value(0,20000) / 86400; -- 20000 sec is the max
COMMIT; If you execute the previous "script", you'll end up with a table called RUNS with 10.000 records. Each record contains a start date and an end date which is max 20.000 second after the start date.
What I would like to do is a report based on these data.
I need something like this:
(first week of 2011 started on sunday. So I go back to the last monday of 2010)
WEEK_NUMBER AVG_FOR_MONDAY_BY_WEEK CUMULATIVE_AVERAGE_FOR_MONDAYS
Week 1: 26/12/2010 - 01/01/2011 9999 88888
Week 2: 02/01/2011 - 08/01/2011 1111 22222
....For each week, I would like to have the average duration (which is the difference in seconds between end_date and start_date) by day (monday needs to have its average, tuesday, wednesday...too)
And I also need a cumulative average by week and by days (mondays, tuesdays...). This cumulative average needs to be based on all the preceding rows.
Can anyone help me with this query? I'm using Oracle 10g
ThanksHi,
Something along these lines :
alter session set nls_date_language = "english";
with all_data as (
select to_char(start_date, 'IYYYIW') as wk
, to_char(start_date, 'dy') as dy
, (end_date - start_date)*86400 as duration
from runs
week_data as (
select wk
, round(avg(case when dy = 'mon' then duration end)) as avg_mon
, round(avg(case when dy = 'tue' then duration end)) as avg_tue
, round(avg(case when dy = 'wed' then duration end)) as avg_wed
, round(avg(case when dy = 'thu' then duration end)) as avg_thu
, round(avg(case when dy = 'fri' then duration end)) as avg_fri
, round(avg(case when dy = 'sat' then duration end)) as avg_sat
, round(avg(case when dy = 'sun' then duration end)) as avg_sun
from all_data
group by wk
select wk
, avg_mon
, sum(avg_mon) over(order by wk) as cum_avg_mon
, avg_tue
, sum(avg_tue) over(order by wk) as cum_avg_tue
, avg_wed
, sum(avg_wed) over(order by wk) as cum_avg_wed
, avg_thu
, sum(avg_thu) over(order by wk) as cum_avg_thu
from week_data
order by wk;
WK AVG_MON CUM_AVG_MON AVG_TUE CUM_AVG_TUE AVG_WED CUM_AVG_WED AVG_THU CUM_AVG_THU
201052
201101 9836 9836 8737 8737 9088 9088 12167 12167
201102 7639 17475 10319 19056 7391 16479 8036 20203
201103 8275 25750 8883 27939 8525 25004 11682 31885
201104 7029 32779 10850 38789 7360 32364 7617 39502
201105 10292 43071 11421 50210 11141 43505 9469 48971
201106 11612 54683 9762 59972 11464 54969 9517 58488
201107 8645 63328 10206 70178 10124 65093 11917 70405
201108 11466 74794 11678 81856 10839 75932 9587 79992
201109 8745 83539 6803 88659 8963 84895 9496 89488
201110 10443 93982 8104 96763 10314 95209 10908 100396
201111 8183 102165 9467 106230 11495 106704 12040 112436
201112 8575 110740 9207 115437 10338 117042 9561 121997
201113 10273 121013 6268 121705 11288 128330 12335 134332
201114 10176 131189 8561 130266 10367 138697 7983 142315
201115 10587 141776 12073 142339 8528 147225 12271 154586
201116 9393 151169 10761 153100 7901 155126 10020 164606
201117 11459 162628 9471 162571 10136 165262 8188 172794
201118 11946 174574 9997 172568 9367 174629 10475 183269
201119 12869 187443 9848 182416 7692 182321 9632 192901
201120 9675 197118 7408 189824 11646 193967 9614 202515
201121 10742 207860 10302 200126 9208 203175 7543 210058
201122 8083 215943 8323 208449 10045 213220 9498 219556
201123 11838 227781 8820 217269 8804 222024 10485 230041
201124 8748 236529 12143 229412 9684 231708 8402 238443
201125 11504 248033 10586 239998 10073 241781 9573 248016
201126 7289 255322 14241 254239 10100 251881 11843 259859
201127 10855 266177 9980 264219 10320 262201 11023 270882
201128 11004 277181 9975 274194 11609 273810 8945 279827
201129 10488 287669 9402 283596 11985 285795 9481 289308
201130 7338 295007 8963 292559 11982 297777 8177 297485
201131 9778 304785 10024 302583 10732 308509 10749 308234
201132 10360 315145 12577 315160 8643 317152 10001 318235
201133 9845 324990 10416 325576 9996 327148 10548 328783
201134 9540 334530 8138 333714 9401 336549 9093 337876
201135 7000 341530 9920 343634 10370 346919 10937 348813
201136 11307 352837 8889 352523 12339 359258 8491 357304
201137 11785 364622 9146 361669 9232 368490 11023 368327
201138 7857 372479 6784 368453 8502 376992 12558 380885
201139 9842 382321 10616 379069 10435 387427 7848 388733
201140 10578 392899 9402 388471 8806 396233 9927 398660
201141 6711 399610 13015 401486 9934 406167 10011 408671
201142 10088 409698 10380 411866 7836 414003 9205 417876
201143 8132 417830 11772 423638 10792 424795 10834 428710
201144 9921 427751 7454 431092 9551 434346 10754 439464
201145 13196 440947 11600 442692 11303 445649 10455 449919
201146 12022 452969 8996 451688 10221 455870 12567 462486
201147 8965 461934 10068 461756 10607 466477 13486 475972
201148 9483 471417 9264 471020 9601 476078 8685 484657
201149 11738 483155 9000 480020 10284 486362 11263 495920
201150 10338 493493 10237 490257 10357 496719 10984 506904
201151 10777 504270 11138 501395 10543 507262 9840 516744
201152 9881 514151 10692 512087 11432 518694 10122 526866
201201 11089 525240 8077 520164 12391 531085 9649 536515
201202 9871 535111 8326 528490 9449 540534 10551 547066
201203 10625 545736 11609 540099 9626 550160 5795 552861
201204 8856 554592 9679 549778 10722 560882 11064 563925
201205 9379 563971 9943 559721 8409 569291 11656 575581
201206 10843 574814 10070 569791 12162 581453 10764 586345
201207 8424 583238 8484 578275 8382 589835 8716 595061
201208 11159 594397 10415 588690 11459 601294 11317 606378
201209 11264 605661 8244 596934 9682 610976 10192 616570
201210 11514 617175 9322 606256 9101 620077 10571 627141
201211 9348 626523 7501 613757 12297 632374 11170 638311
201212 10523 637046 7605 621362 10348 642722 10068 648379
201213 10411 647457 11686 633048 10212 652934 9574 657953
201214 9394 656851 10526 643574 8521 661455 9829 667782
201215 8994 665845 12256 655830 8243 669698 10592 678374
201216 11491 677336 10939 666769 12846 682544 9708 688082
201217 9737 687073 9611 676380 7244 689788 10943 699025
201218 9024 696097 11286 687666 10033 699821 10314 709339
201219 9851 705948 9851 697517 9159 708980 9917 719256
201220 7785 713733 10490 708007 8534 717514 8528 727784
201221 11107 724840 8197 716204 8926 726440 10834 738618
201222 8093 732933 11853 728057 11697 738137 10081 748699
201223 9371 742304 10796 738853 11068 749205 9904 758603
201224 10600 752904 8487 747340 10838 760043 8009 766612
201225 11090 763994 9595 756935 10736 770779 9387 775999
201226 8234 772228 12759 769694 9119 779898 8422 784421
201227 9738 781966 9383 779077 8978 788876 11635 796056
201228 11687 793653 10302 789379 9459 798335 10608 806664
201229 9245 802898 11290 800669 798335 806664
82 rows selected -
Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanksThose are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
I have an irritating problem with mail autofilling info in email addresses. Emails sent to me the from looks like this: Holiday in the United States <my email address>. I have no idea what this Holiday in the United States is or how it got to be there...How can I fix/change to my name?
I fixed the To: autofilling incorrectly by deleting my email address from the Previous Recipients List, but is there a way to stop that from coming up on emails that I receive?Have you checked your Mac address book? If your email is saved somewhere in your address book with the name "Holidays in the United States" it might be adding the name automatically in Mac Mail.
Alternatively, try this:
Delete an Email Address from Auto-Complete in Mac OS X Mail
To remove an email address from the auto-complete list in Mac OS X Mail:
Start typing the recipient's address or name in a new message.
Select the desired address from the auto-complete list as if you'd compose an email to them.
Click the small down arrow in the recipient.
Select Remove from Previous Recipients List from the menu.
You can also search for the unwanted address directly in the previous recipients list:
Select Window | Previous Recipients from the menu in Mac OS X Mail.
Highlight the address you want to remove.You can highlight multiple addresses by holding down the Command key.
Click Remove from List.
Source: About.com -
I "Reset Firefox – easily fix most problems", but it doesn't look like the view on getting started tutorial, ie: there's no "Firefox tab". I would really like to clean out all the old stuff, including add-ons and plug-ins that I've tinkered in, but don't know about or need any more, then start fresh with the latest Firefox. How can I do that?
The Firefox button does not or did not showupon Windows XP by default.
It is easy to display that just remove the option to display the menu bar toolbar. Note
# The functions and available optons are much the same just organised differenttly
# Menu tool bar may be displayed temporarily; even if the Firefox Button is present: by holding down the keyboard '''Alt''' key
#To remove the menu toolbar use '''View -> Toolbars -> []Menu Toolbar'''<br /> see [[Display the Firefox button menu instead of the menu toolbar]] -
Got wet walking home in the rain it looks like everything is working fine except the touch screen wont work. Can anybody point me in the right direction to solve this problem, or who to talk to about getting it fixed???
Do not use, charge or turn on your iPod until it is dry:
How to fix a wet iPod or iPhone | eHow.com
Maybe you are looking for
-
Good software to know for video prod.
hello, ive been using final cut for about a year and a half and i would like to do some editing on the side. ultimatley, i would like to start a little video editing business. i recently goit the cs3 collec and am enjoying that a lot but with so many
-
Is Adobe reader 8 or higher supported in webdynpro applications
Hi, We have developed a webdynpro application which opens up a Adobe form for the user. The problem is for a user who is uisng IE 7 and adobe version 8 or higher, when he runs the application the adobe form does not open up he has a small 'X' sign co
-
What does error :40106 - No navigable items in destination block means ?
I have a couple of blocks in my form . One is a control block and the others are database blocks . I get this error when I click on the search button in my form . Thanks.
-
Hello, I'm a master student in communication in Epfl but I didn't figure it out There is a strage noise while I open and close mechanically the laptop. Actually I can change the noise with IDT, however I cannot remove that. The noise comes from the b
-
Using the adobe on the iPad, after filling in a PDF form, when it is emailed, it arrives blank at the other end. Wondering why this happens.