Lookup field to connect the CRM tables With 2LIS_11_VAITM

Dear Gurus,
Greetings for the day...!!!
In CRM system I have two tables
1.CRMD_ORDERADM_H
*Object Id* is the field
and the next table is
2.SCAPPTSEG
Fields in tht table are TST_FROM
                                TST_TO
I have to link this two tables with datasource 2LIS_11_VAITM
I have tried to connect with a lookup field from the tables to the datasource,but I didnt find a common field.
Even I tried to connect the datasource thru some other table but I couldnt
Pls help me out in this...!!!
Points will be awarded
Regards
Lucky

This is standard behavior. Custom fields do not trigger delta.
You can try several options -
- If it is a standard SAP field coming from one of those VB* tables, try to name your custom field the same (SAP gives a warning, but you can ignore it). SAP sends the complete structures (eg VBAK, VBAP) for delta recording, and if this field is part of these structures, it may trigger the delta.
If that is not applicable, consider extending the LIS comm structure underlying this extractor and use an LIS exit to populate this field. This field will then be available in LBWE to transfer to extract structure and will trigger the delta. The appropriate exit is mentioned in Roberto Negro's weblog on extractors here on SDN (am not on system so cant give you the LIS exit name).
If that is also out of question, try what is described <a href="http://www.ko-india.com/content/weblogs/weblog_custom_fields_1.pdf">here</a>.

Similar Messages

  • Unable to connect the crm client with the IPC server

    Hi,
    I am unable to connect with one CRM client with the IPC server.
    my Dispatcher and all the IPC servers are working all.
    Plz helpme out.
    With thanks and Regards,
    Yusuf.

    Hi Muhammed,
    Check in the file dispatcher.properties if the RFC names are correctly maintained.
    Regards,
    Patricia
    PS Your post was in the wrong forum. I moved it to the correct one where the chance of an answer is much higher.
    Hope you understand and good luck.
    Regards,
    Patricia
    SDN Moderator

  • In OWB I need to update the target table with same field for match/update

    In OWb I am trying to update the target table with the match and the update on the same field can this be done. I am getting a error match merge error saying you cannot update and match on the same field. But in SQl my select is
    Update table
    set irf = 0
    where irf = 1
    and process_id = 'TEST'
    Hwo do i do this in OWB.

    table name is temp
    fields in the table
    field1 number
    field2 varchar2(10)
    field3 date
    values in the table are example
    0,'TEST',05/29/2009
    9,'TEST',05/29/2009
    0,'TEST1',03/01/2009
    1,'TEST1',03/01/2009
    In the above example I need to update the first row field1 to 1.
    Update temp
    set field1 = 1
    where field1 = 0
    and field2 = 'TEST'
    when I run this I just need one row to be updated and it should look like this below
    1,'TEST',05/29/2009
    9,'TEST',05/29/2009
    0,'TEST1',03/01/2009
    1,'TEST1',03/01/2009
    But when I run my mapping I am getting the rows like below the second row with 9 also is getting updated to 1.
    1,'TEST',05/29/2009
    1,'TEST',05/29/2009
    0,'TEST1',03/01/2009
    1,'TEST1',03/01/2009

  • Declare the internal table with only one 10 character  field and use

    Hi,
    I want to declare the internal table with only one 10 character  field and use.
    Jaya

    Hi,
    Go ahead. U can declare IT with only one field
    Example:
    data: begin of zcustlist occurs 1000,
                   custmer(10)  type c,
             end of zcustlist.
    Narendra Reddy.
    Edited by: Narendra Reddy C on Aug 8, 2008 11:39 AM

  • Validate the data in the internal table with the date in selection screen

    Hi all,
    I want to validate the data in the internal table and get only the records with the input date in the selection screen.
    The date is in the select options and please let me know how to get the records only if it satisfies the input date in the selection screen.
    Regards,
    Shalem

    For Ex.
    SELECT-OPTIONS: S_DATE FOR VBAK-VDATU
    If you want to read one INTERNAL TABLE record
    READ TABLE it_tab(internal table name) WHERE vdatu(date field name in the internal table) = s_date
    If you want to move more then one
    LOOP AT it_tab WHERE vdatu = s_date.
    Take the field values in another table and append it. then end loop.
    you will get the records which only have the date in select option..
    If you want detail code give me internal table name and select option name i will write you the code.
    regards
    Yuvaram

  • Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
    Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    The Oracle documentation has a good overview of the options available
    Generating XML Data from the Database
    Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
    You can also find some information in XML DB FAQ

  • Downloading the internal table with header to FTP folder

    Hi All,
    I have one requirement in downloading the internal table details with the fixed header line to FTP folder. The header line having the fixed text of 425 characters length.
    Note: We are not suppose to use WS_DOWNLOAD and GUI_DOWNLOAD function modules.
    Thanks in advance for your reply.
    Regards
    Kamini.

    Hi,
    I can download the internal table details successfully to FTP folder using the FTP function modules like(FTP_CONNECT, FTP_COMMAND , FTP_R/3_TO_SERVER and FTP_DISCONNECT). Here my problem is I am unable to download the internation table with some header text.
    You can see the format (example) of file to be download.
    Here I can successfully download the below details without the header. But I am unable to download with header line. Could you please suggest me.
    seq_no|record_action|trans_date|sku|description|
    1|N|2008-01-03 07:52:31|TTASA5025CBO     
    2|N|2008-01-03 10:28:33|411014        
    3|N|2008-01-03 10:01:03|TTASA6030CBO  
    4|N|2008-01-03 10:01:15|TTASA6630CBO
    5|N|2008-01-03 10:01:25|TTASA7035CBO 
    6|N|2008-01-08 16:57:39|TT6G       
    Regards
    Kamini.

  • Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

    pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

    Dear Valued Pioneer Customer:
    We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device.  If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
    This firmware update may be used only with the following 2012 Pioneer products:
    CD Receivers
    DVD Receivers
    DEH-P8400BH
    DEH-P9400BH
    DEH-80PRS
    AVH-P2400BT
    AVH-P3400BH
    AVH-P4400BH
    AVH-P8400BH
    In order to perform this update, the following items are needed:
    A Pioneer CD or DVD Receiver above with built-in Bluetooth
    Laptop with built-in Bluetooth running Windows® 7
    Bluetooth firmware update (HW05-SW01.27.20)
    How to Obtain the Free Firmware Update
    1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
    2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
    You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
    How to Determine if the Firware Update has Already been Installed
    CD Receivers:
    • With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
    DVD Receivers:
    • With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
    If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
    Questions
    If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
    Sincerely,
    Pioneer Electronics (USA) Inc.

  • You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    I tried to answer in your other post.. please stick to one thread ..
    What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

  • Can I connect the iphone 3gs with ipad 2?

    Hallo
    can I connect the iphone 3gs with ipad 2?

    You can connect it to use the iPhone as a personal hotspot for the iPad, or to transfer photos/videos via the camera connection kit. You can't connect them in order to transfer music, documents etc.

  • How to add field value to the standard table

    Hi,
    How to add field value to the standard table?
    for example:
    when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

    Hi Asif,
    I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
    If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
    Hope this is clear for u.
    Thanks,
    Vinod.

  • Trying to connect the CRM 7.0 and ECC 6.0 (RFC ?)

    Hello Gurus,
    I am trying to connect the CRM 7.0 server to ECC 6.0 server. Can anybody please give me a step by step procedure for this please. Thanks in advance.
    Phani KV

    Hi Phani,
    I assume that you do not want to actually use a direct RFC but the CRM Middleware. In order to do this you find lots of helpful information in the best practices, there the basic building blocks. Best practices you can download from the service market place. Alternatively you could google http://www.google.com/search?q=crmconnectivitybestpracticesite%3Asap.com

  • I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights fl

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

  • Sample report for filling the database table with test data .

    Hi ,
    Can anyone provide me sample report for filling the database table with test data ?
    Thanks ,
    Abhi.

    hi
    the code
    data : itab type table of Z6731_DEPTDETAIL,
           wa type Z6731_DEPTDETAIL.
    wa-DEPT_ID = 'z897hkjh'.
    wa-DESCRIPTION = 'computer'.
    append wa to itab.
    wa-DEPT_ID = 'z897hkjhd'.
    wa-DESCRIPTION = 'computer'.
    append wa to itab.
    loop at itab into wa.
    insert z6731_DEPTDETAIL from wa.
    endloop.
    rewards if helpful

  • Do I need to connect the AirPort Extreme with a ethnet cable

    Do I need to connect the AirPort Extreme with a ethnet cable

    Hi Tracy,
    I have an airport express connected by ethernet cable to a Netgear modem which is connected to a phone socket. Those devices stay at one end of the house. I can use my MacBook Pro to connect to the internet (by Wi-Fi, no cables) anywhere else in the house.  I hope this helps.
    Ian.

Maybe you are looking for